patch-2.1.67 linux/drivers/net/tlan.c
Next file: linux/drivers/net/tlan.h
Previous file: linux/drivers/net/sunhme.c
Back to the patch index
Back to the overall index
- Lines: 4690
- Date:
Wed Nov 26 16:21:54 1997
- Orig file:
v2.1.66/linux/drivers/net/tlan.c
- Orig date:
Wed Sep 3 20:52:42 1997
diff -u --recursive --new-file v2.1.66/linux/drivers/net/tlan.c linux/drivers/net/tlan.c
@@ -27,10 +27,8 @@
#include <linux/module.h>
-
#include "tlan.h"
-
#include <linux/bios32.h>
#include <linux/ioport.h>
#include <linux/pci.h>
@@ -39,1143 +37,1347 @@
+typedef u32 (TLanIntVectorFunc)( struct device *, u16 );
+
#ifdef MODULE
- static struct device *TLanDevices = NULL;
- static int TLanDevicesInstalled = 0;
+
+static struct device *TLanDevices = NULL;
+static int TLanDevicesInstalled = 0;
+
#endif
- static int debug = 0;
- static int aui = 0;
- static u8 *TLanPadBuffer;
- static char TLanSignature[] = "TLAN";
- static int TLanVersionMajor = 0;
- static int TLanVersionMinor = 32;
-
- static TLanPciId TLanDeviceList[] = {
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10, "Compaq Netelligent 10" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100, "Compaq Netelligent 10/100" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETFLEX_3P_INTEGRATED, "Compaq Integrated NetFlex-3/P" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETFLEX_3P, "Compaq NetFlex-3/P" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETFLEX_3P_BNC, "Compaq NetFlex-3/P w/ BNC" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_PROLIANT, "Compaq ProLiant Netelligent 10/100" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_DUAL, "Compaq Dual Port Netelligent 10/100" },
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_DESKPRO_4000_5233MMX, "Compaq Deskpro 4000 5233MMX" },
- { 0, 0, NULL } /* End of List */
- };
- static int TLan_MiiReadReg(u16, u16, u16, u16 *);
- static void TLan_MiiSendData( u16, u32, unsigned );
- static void TLan_MiiSync(u16);
- static void TLan_MiiWriteReg(u16, u16, u16, u16);
+static int debug = 0;
+static int aui = 0;
+static u8 *TLanPadBuffer;
+static char TLanSignature[] = "TLAN";
+static int TLanVersionMajor = 0;
+static int TLanVersionMinor = 38;
+
+
+static TLanPciId TLanDeviceList[] = {
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETELLIGENT_10,
+ "Compaq Netelligent 10"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETELLIGENT_10_100,
+ "Compaq Netelligent 10/100"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETFLEX_3P_INTEGRATED,
+ "Compaq Integrated NetFlex-3/P"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETFLEX_3P,
+ "Compaq NetFlex-3/P"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETFLEX_3P_BNC,
+ "Compaq NetFlex-3/P"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETELLIGENT_10_100_PROLIANT,
+ "Compaq ProLiant Netelligent 10/100"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_NETELLIGENT_10_100_DUAL,
+ "Compaq Dual Port Netelligent 10/100"
+ },
+ { PCI_VENDOR_ID_COMPAQ,
+ PCI_DEVICE_ID_DESKPRO_4000_5233MMX,
+ "Compaq Deskpro 4000 5233MMX"
+ },
+ { 0,
+ 0,
+ NULL
+ } /* End of List */
+};
+
+
+static int TLan_PciProbe( u8 *, u8 *, u8 *, u8 *, u32 *, u32 * );
+static int TLan_Init( struct device * );
+static int TLan_Open(struct device *dev);
+static int TLan_StartTx(struct sk_buff *, struct device *);
+static void TLan_HandleInterrupt(int, void *, struct pt_regs *);
+static int TLan_Close(struct device *);
+static struct net_device_stats *TLan_GetStats( struct device * );
+static void TLan_SetMulticastList( struct device * );
+
+static u32 TLan_HandleInvalid( struct device *, u16 );
+static u32 TLan_HandleTxEOF( struct device *, u16 );
+static u32 TLan_HandleStatOverflow( struct device *, u16 );
+static u32 TLan_HandleRxEOF( struct device *, u16 );
+static u32 TLan_HandleDummy( struct device *, u16 );
+static u32 TLan_HandleTxEOC( struct device *, u16 );
+static u32 TLan_HandleStatusCheck( struct device *, u16 );
+static u32 TLan_HandleRxEOC( struct device *, u16 );
+
+static void TLan_Timer( unsigned long );
+
+static void TLan_ResetLists( struct device * );
+static void TLan_PrintDio( u16 );
+static void TLan_PrintList( TLanList *, char *, int );
+static void TLan_ReadAndClearStats( struct device *, int );
+static int TLan_Reset( struct device * );
+static void TLan_SetMac( struct device *, int areg, char *mac );
+
+static int TLan_PhyNop( struct device * );
+static void TLan_PhyPrint( struct device * );
+static void TLan_PhySelect( struct device * );
+static int TLan_PhyInternalCheck( struct device * );
+static int TLan_PhyInternalService( struct device * );
+static int TLan_PhyDp83840aCheck( struct device * );
+
+static int TLan_MiiReadReg(u16, u16, u16, u16 *);
+static void TLan_MiiSendData( u16, u32, unsigned );
+static void TLan_MiiSync(u16);
+static void TLan_MiiWriteReg(u16, u16, u16, u16);
+
+static void TLan_EeSendStart( u16 );
+static int TLan_EeSendByte( u16, u8, int );
+static void TLan_EeReceiveByte( u16, u8 *, int );
+static int TLan_EeReadByte( u16, u8, u8 * );
+
+
+static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
+ TLan_HandleInvalid,
+ TLan_HandleTxEOF,
+ TLan_HandleStatOverflow,
+ TLan_HandleRxEOF,
+ TLan_HandleDummy,
+ TLan_HandleTxEOC,
+ TLan_HandleStatusCheck,
+ TLan_HandleRxEOC
+};
/*****************************************************************************
******************************************************************************
- ThunderLAN Driver MII Routines
+ ThunderLAN Driver Primary Functions
- These routines are based on the information in Chap. 2 of the
- "ThunderLAN Programmer's Guide", pp. 15-24.
+ These functions are more or less common to all Linux network drivers.
******************************************************************************
*****************************************************************************/
- /*************************************************************************
- * TLan_MiiReadReg
- *
- * Returns: 0 if ack received ok, 1 otherwise.
- * Parms: base_port The base IO port of the adapter in question.
- * dev The address of the PHY to be queried.
- * reg The register whose contents are to be
- * retreived.
- * val A pointer to a variable to store the retrieved
- * value.
- *
- * This function uses the TLAN's MII bus to retreive the contents of a
- * given register on a PHY. It sends the appropriate info and then
- * reads the 16-bit register value from the MII bus via the TLAN SIO
- * register.
- *
- ************************************************************************/
-
- int TLan_MiiReadReg(u16 base_port, u16 dev, u16 reg, u16 *val)
- {
- u8 nack;
- u16 sio, tmp;
- u32 i;
- int err;
- int minten;
-
- err = FALSE;
- outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
- sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
-
- cli();
-
- TLan_MiiSync(base_port);
-
- minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
- if ( minten )
- TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
-
- TLan_MiiSendData( base_port, 0x1, 2 ); /* Start ( 01b ) */
- TLan_MiiSendData( base_port, 0x2, 2 ); /* Read ( 10b ) */
- TLan_MiiSendData( base_port, dev, 5 ); /* Device # */
- TLan_MiiSendData( base_port, reg, 5 ); /* Register # */
-
+#ifdef MODULE
- TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio); /* Change direction */
+ /***************************************************************
+ * init_module
+ *
+ * Returns:
+ * 0 if module installed ok, non-zero if not.
+ * Parms:
+ * None
+ *
+ * This function begins the setup of the driver creating a
+ * pad buffer, finding all TLAN devices (matching
+ * TLanDeviceList entries), and creating and initializing a
+ * device structure for each adapter.
+ *
+ **************************************************************/
+
+extern int init_module(void)
+{
+ TLanPrivateInfo *priv;
+ u8 bus;
+ struct device *dev;
+ size_t dev_size;
+ u8 dfn;
+ u32 dl_ix;
+ int failed;
+ int found;
+ u32 io_base;
+ u8 irq;
+ u8 rev;
+
+ printk( "TLAN driver, v%d.%d, (C) 1997 Caldera, Inc.\n",
+ TLanVersionMajor,
+ TLanVersionMinor
+ );
+ TLanPadBuffer = (u8 *) kmalloc( TLAN_MIN_FRAME_SIZE,
+ ( GFP_KERNEL | GFP_DMA )
+ );
+ if ( TLanPadBuffer == NULL ) {
+ printk( "TLAN: Could not allocate memory for pad buffer.\n" );
+ return -ENOMEM;
+ }
+
+ memset( TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE );
+
+ dev_size = sizeof(struct device) + sizeof(TLanPrivateInfo);
+
+ while ( ( found = TLan_PciProbe( &bus, &dfn, &irq, &rev, &io_base, &dl_ix ) ) )
+ {
+ dev = (struct device *) kmalloc( dev_size, GFP_KERNEL );
+ if ( dev == NULL ) {
+ printk( "TLAN: Could not allocate memory for device.\n" );
+ continue;
+ }
+ memset( dev, 0, dev_size );
+
+ dev->priv = priv = ( (void *) dev ) + sizeof(struct device);
+ dev->name = priv->devName;
+ strcpy( priv->devName, " " );
+ dev->base_addr = io_base;
+ dev->irq = irq;
+ dev->init = TLan_Init;
+
+ priv->pciBus = bus;
+ priv->pciDeviceFn = dfn;
+ priv->pciRevision = rev;
+ priv->pciEntry = dl_ix;
+
+ ether_setup( dev );
+
+ failed = register_netdev( dev );
+
+ if ( failed ) {
+ printk( "TLAN: Could not register network device. Freeing struct.\n" );
+ kfree( dev );
+ } else {
+ priv->nextDevice = TLanDevices;
+ TLanDevices = dev;
+ TLanDevicesInstalled++;
+ printk("TLAN: %s irq=%2d io=%04x, %s\n", dev->name, (int) irq, io_base, TLan
+DeviceList[dl_ix].deviceName );
+ }
+ }
+
+ // printk( "TLAN: Found %d device(s).\n", TLanDevicesInstalled );
- TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Clock through Idle bit */
- TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
- TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Use this to wait 300ns */
+ return ( ( TLanDevicesInstalled >= 0 ) ? 0 : -ENODEV );
- nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio); /* Check for ACK */
- TLan_SetBit(TLAN_NET_SIO_MCLK, sio); /* Finish ACK clock cycle */
- if (nack) { /* No ACK, so fake it */
- for (i = 0; i < 16; i++) {
- TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
- TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
- }
- tmp = 0xffff;
- err = TRUE;
- } else { /* ACKed, so read data */
- for (tmp = 0, i = 0x8000; i; i >>= 1) {
- TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
- if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
- tmp |= i;
- TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
- }
- }
+} /* init_module */
- TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Idle cycle */
- TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
- if ( minten )
- TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
- *val = tmp;
+ /***************************************************************
+ * cleanup_module
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * None
+ *
+ * Goes through the TLanDevices list and frees the device
+ * structs and memory associated with each device (lists
+ * and buffers). It also ureserves the IO port regions
+ * associated with this device.
+ *
+ **************************************************************/
+
+extern void cleanup_module(void)
+{
+ struct device *dev;
+ TLanPrivateInfo *priv;
+
+ while (TLanDevicesInstalled) {
+ dev = TLanDevices;
+ priv = (TLanPrivateInfo *) dev->priv;
+ if ( priv->dmaStorage )
+ kfree( priv->dmaStorage );
+ release_region( dev->base_addr, 0x10 );
+ unregister_netdev( dev );
+ TLanDevices = priv->nextDevice;
+ kfree( dev );
+ TLanDevicesInstalled--;
+ }
+ kfree( TLanPadBuffer );
- sti();
+} /* cleanup_module */
- return err;
- } /* TLan_MiiReadReg */
+#else /* MODULE */
- /*************************************************************************
- * TLan_MiiSendData
- *
- * Returns: Nothing
- * Parms: base_port The base IO port of the adapter in question.
- * dev The address of the PHY to be queried.
- * data The value to be placed on the MII bus.
- * num_bits The number of bits in data that are to be
- * placed on the MII bus.
+ /***************************************************************
+ * tlan_probe
*
- * This function sends on sequence of bits on the MII configuration
- * bus.
+ * Returns:
+ * 0 on success, error code on error
+ * Parms:
+ * dev device struct to use if adapter is
+ * found.
+ *
+ * The name is lower case to fit in with all the rest of
+ * the netcard_probe names. This function looks for a/
+ * another TLan based adapter, setting it up with the
+ * provided device struct if one is found.
*
- ************************************************************************/
+ **************************************************************/
+
+extern int tlan_probe( struct device *dev )
+{
+ static int pad_allocated = 0;
+ int found;
+ TLanPrivateInfo *priv;
+ u8 bus, dfn, irq, rev;
+ u32 io_base, dl_ix;
+
+ found = TLan_PciProbe( &bus, &dfn, &irq, &rev, &io_base, &dl_ix );
+ if ( found ) {
+ dev->priv = kmalloc( sizeof(TLanPrivateInfo), GFP_KERNEL );
+ if ( dev->priv == NULL ) {
+ printk( "TLAN: Could not allocate memory for device.\n" );
+ }
+ memset( dev->priv, 0, sizeof(TLanPrivateInfo) );
+ priv = (TLanPrivateInfo *) dev->priv;
+
+ dev->name = priv->devName;
+ strcpy( priv->devName, " " );
+
+ dev = init_etherdev( dev, sizeof(TLanPrivateInfo) );
+
+ dev->base_addr = io_base;
+ dev->irq = irq;
+
+ priv->pciBus = bus;
+ priv->pciDeviceFn = dfn;
+ priv->pciRevision = rev;
+ priv->pciEntry = dl_ix;
- void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
- {
- u16 sio;
- u32 i;
-
- if ( num_bits == 0 )
- return;
-
- outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
- sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
- TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
-
- for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
- TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
- TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
- if ( data & i )
- TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
- else
- TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
- TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
- TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+ if ( ! pad_allocated ) {
+ TLanPadBuffer = (u8 *) kmalloc( TLAN_MIN_FRAME_SIZE, GFP_KERNEL | GFP_DMA );
+ if ( TLanPadBuffer == NULL ) {
+ printk( "TLAN: Could not allocate memory for pad buffer.\n" );
+ } else {
+ pad_allocated = 1;
+ memset( TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE );
}
+ }
+ printk("TLAN %d.%d: %s irq=%2d io=%04x, %s\n",TLanVersionMajor,
+ TLanVersionMinor,
+ dev->name,
+ (int) irq,
+ io_base,
+ TLanDeviceList[dl_ix].deviceName );
+ TLan_Init( dev );
+ }
+
+ return ( ( found ) ? 0 : -ENODEV );
- } /* TLan_MiiSendData */
+} /* tlan_probe */
+#endif /* MODULE */
- /*************************************************************************
- * TLan_MiiSync
- *
- * Returns: Nothing
- * Parms: base_port The base IO port of the adapter in question.
+
+
+ /***************************************************************
+ * TLan_PciProbe
*
- * This functions syncs all PHYs in terms of the MII configuration bus.
+ * Returns:
+ * 1 if another TLAN card was found, 0 if not.
+ * Parms:
+ * pci_bus The PCI bus the card was found
+ * on.
+ * pci_dfn The PCI whatever the card was
+ * found at.
+ * pci_irq The IRQ of the found adapter.
+ * pci_rev The revision of the adapter.
+ * pci_io_base The first IO port used by the
+ * adapter.
+ * dl_ix The index in the device list
+ * of the adapter.
+ *
+ * This function searches for an adapter with PCI vendor
+ * and device IDs matching those in the TLanDeviceList.
+ * The function 'remembers' the last device it found,
+ * and so finds a new device (if anymore are to be found)
+ * each time the function is called. It then looks up
+ * pertinent PCI info and returns it to the caller.
*
- ************************************************************************/
+ **************************************************************/
- void TLan_MiiSync( u16 base_port )
- {
- int i;
- u16 sio;
+int TLan_PciProbe( u8 *pci_bus, u8 *pci_dfn, u8 *pci_irq, u8 *pci_rev, u32 *pci_
+io_base, u32 *dl_ix )
+{
+ static int dl_index = 0;
+ static int pci_index = 0;
+
+ int not_found;
+ u8 pci_latency;
+ u16 pci_command;
+ int reg;
+
+
+ if ( ! pcibios_present() ) {
+ printk( "TLAN: PCI Bios not present.\n" );
+ return 0;
+ }
+
+ for (; TLanDeviceList[dl_index].vendorId != 0; dl_index++) {
+
+ not_found = pcibios_find_device(
+ TLanDeviceList[dl_index].vendorId,
+ TLanDeviceList[dl_index].deviceId,
+ pci_index,
+ pci_bus,
+ pci_dfn
+ );
+
+ if ( ! not_found ) {
+
+ TLAN_DBG(
+ TLAN_DEBUG_GNRL,
+ "TLAN: found: Vendor Id = 0x%hx, Device Id = 0x%hx\n",
+ TLanDeviceList[dl_index].vendorId,
+ TLanDeviceList[dl_index].deviceId
+ );
+
+ pcibios_read_config_byte ( *pci_bus, *pci_dfn, PCI_REVISION_ID, pci_rev);
+ pcibios_read_config_byte ( *pci_bus, *pci_dfn, PCI_INTERRUPT_LINE, pci_irq);
+ pcibios_read_config_word ( *pci_bus, *pci_dfn, PCI_COMMAND, &pci_command);
+ pcibios_read_config_dword( *pci_bus, *pci_dfn, PCI_BASE_ADDRESS_0, pci_io_ba
+se);
+ pcibios_read_config_byte ( *pci_bus, *pci_dfn, PCI_LATENCY_TIMER, &pci_laten
+cy);
+
+ if (pci_latency < 0x10) {
+ pcibios_write_config_byte( *pci_bus, *pci_dfn, PCI_LATENCY_TIMER, 0xff);
+ TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Setting latency timer to max.\n");
+ }
+
+ for ( reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg +=4 ) {
+ pcibios_read_config_dword( *pci_bus, *pci_dfn, reg, pci_io_base);
+ if ((pci_command & PCI_COMMAND_IO) && (*pci_io_base & 0x3)) {
+ *pci_io_base &= PCI_BASE_ADDRESS_IO_MASK;
+ TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: IO mapping is available at %x.\n", *pc
+i_io_base);
+ break;
+ } else {
+ *pci_io_base = 0;
+ }
+ }
- outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
- sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+ if ( *pci_io_base == 0 )
+ printk("TLAN: IO mapping not available, ignoring device.\n");
- TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
- for ( i = 0; i < 32; i++ ) {
- TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
- TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+ if (pci_command & PCI_COMMAND_MASTER) {
+ TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Bus mastering is active.\n");
}
- } /* TLan_MiiSync */
+ pci_index++;
+ if ( *pci_io_base ) {
+ *dl_ix = dl_index;
+ return 1;
+ }
+ } else {
+ pci_index = 0;
+ }
+ }
+ return 0;
- /*************************************************************************
- * TLan_MiiWriteReg
- *
- * Returns: Nothing
- * Parms: base_port The base IO port of the adapter in question.
- * dev The address of the PHY to be written to.
- * reg The register whose contents are to be
- * written.
- * val The value to be written to the register.
- *
- * This function uses the TLAN's MII bus to write the contents of a
- * given register on a PHY. It sends the appropriate info and then
- * writes the 16-bit register value from the MII configuration bus
- * via the TLAN SIO register.
- *
- ************************************************************************/
+} /* TLan_PciProbe */
- void TLan_MiiWriteReg(u16 base_port, u16 dev, u16 reg, u16 val)
- {
- u16 sio;
- int minten;
- outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
- sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
- cli();
- TLan_MiiSync( base_port );
-
- minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
- if ( minten )
- TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
+ /***************************************************************
+ * TLan_Init
+ *
+ * Returns:
+ * 0 on success, error code otherwise.
+ * Parms:
+ * dev The structure of the device to be
+ * init'ed.
+ *
+ * This function completes the initialization of the
+ * device structure and driver. It reserves the IO
+ * addresses, allocates memory for the lists and bounce
+ * buffers, retrieves the MAC address from the eeprom
+ * and assignes the device's methods.
+ *
+ **************************************************************/
- TLan_MiiSendData( base_port, 0x1, 2 ); /* Start ( 01b ) */
- TLan_MiiSendData( base_port, 0x1, 2 ); /* Write ( 01b ) */
- TLan_MiiSendData( base_port, dev, 5 ); /* Device # */
- TLan_MiiSendData( base_port, reg, 5 ); /* Register # */
+int TLan_Init( struct device *dev )
+{
+ int dma_size;
+ int err;
+ int i;
+ TLanPrivateInfo *priv;
+
+ priv = (TLanPrivateInfo *) dev->priv;
+
+ err = check_region( dev->base_addr, 0x10 );
+ if ( err ) {
+ printk( "TLAN: %s: Io port region 0x%lx size 0x%x in use.\n",
+ dev->name,
+ dev->base_addr,
+ 0x10 );
+ return -EIO;
+ }
+ request_region( dev->base_addr, 0x10, TLanSignature );
+
+ dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
+ * ( sizeof(TLanList) + TLAN_MAX_FRAME_SIZE );
+ priv->dmaStorage = kmalloc( dma_size, GFP_KERNEL | GFP_DMA );
+ if ( priv->dmaStorage == NULL ) {
+ printk( "TLAN: Could not allocate lists and buffers for %s.\n",
+ dev->name );
+ return -ENOMEM;
+ }
+ memset( priv->dmaStorage, 0, dma_size );
+ priv->rxList = (TLanList *)
+ ( ( ( (u32) priv->dmaStorage ) + 7 ) & 0xFFFFFFF8 );
+ priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
+ priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
+ priv->txBuffer = priv->rxBuffer
+ + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+
+ err = 0;
+ for ( i = 0; i < 6 ; i++ )
+ err |= TLan_EeReadByte( dev->base_addr,
+ (u8) 0x83 + i,
+ (u8 *) &dev->dev_addr[i] );
+ if ( err )
+ printk( "TLAN: %s: Error reading MAC from eeprom: %d\n",
+ dev->name,
+ err );
+ dev->addr_len = 6;
+
+ dev->open = &TLan_Open;
+ dev->hard_start_xmit = &TLan_StartTx;
+ dev->stop = &TLan_Close;
+ dev->get_stats = &TLan_GetStats;
+ dev->set_multicast_list = &TLan_SetMulticastList;
- TLan_MiiSendData( base_port, 0x2, 2 ); /* Send ACK */
- TLan_MiiSendData( base_port, val, 16 ); /* Send Data */
+#ifndef MODULE
- TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); /* Idle cycle */
- TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+ aui = dev->mem_start & 0x01;
+ debug = dev->mem_end;
- if ( minten )
- TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
+#endif /* MODULE */
- sti();
+ return 0;
- } /* TLan_MiiWriteReg */
+} /* TLan_Init */
-/*****************************************************************************
-******************************************************************************
+ /***************************************************************
+ * TLan_Open
+ *
+ * Returns:
+ * 0 on success, error code otherwise.
+ * Parms:
+ * dev Structure of device to be opened.
+ *
+ * This routine puts the driver and TLAN adapter in a
+ * state where it is ready to send and receive packets.
+ * It allocates the IRQ, resets and brings the adapter
+ * out of reset, and allows interrupts. It also delays
+ * the startup for autonegotiation or sends a Rx GO
+ * command to the adapter, as appropriate.
+ *
+ **************************************************************/
+
+int TLan_Open( struct device *dev )
+{
+ int err;
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+
+ priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
+ err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev
+ );
+ if ( err ) {
+ printk( "TLAN: Cannot open %s because IRQ %d is already in use.\n", dev->name
+, dev->irq );
+ return -EAGAIN;
+ }
+
+ MOD_INC_USE_COUNT;
+
+ dev->tbusy = 0;
+ dev->interrupt = 0;
+ dev->start = 1;
+
+ /* NOTE: It might not be necessary to read the stats before a
+ reset if you don't care what the values are.
+ */
+ TLan_ResetLists( dev );
+ TLan_ReadAndClearStats( dev, TLAN_IGNORE );
+ TLan_Reset( dev );
+ TLan_Reset( dev );
+ TLan_SetMac( dev, 0, dev->dev_addr );
+ outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
+ if ( debug >= 1 )
+ outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
+
+ init_timer( &priv->timer );
+ priv->timer.data = (unsigned long) dev;
+ priv->timer.function = &TLan_Timer;
+ if ( priv->phyFlags & TLAN_PHY_AUTONEG ) {
+ priv->timer.expires = jiffies + TLAN_TIMER_LINK_DELAY;
+ priv->timerSetAt = jiffies;
+ priv->timerType = TLAN_TIMER_LINK;
+ add_timer( &priv->timer );
+ } else {
+ outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
+ outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
+ }
+
+ TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Device %s opened. Revision = %x\n", dev->na
+me, priv->tlanRev );
- ThunderLAN Driver PHY Layer Routines
+ return 0;
- The TLAN chip can drive any number of PHYs (physical devices). Rather
- than having lots of 'if' or '#ifdef' statements, I have created a
- second driver layer for the PHYs. Each PHY can be identified from its
- id in registers 2 and 3, and can be given a Check and Service routine
- that will be called when the adapter is reset and when the adapter
- receives a Network Status interrupt, respectively.
-
-******************************************************************************
-*****************************************************************************/
+} /* TLan_Open */
- static int TLan_PhyNop( struct device * );
- static void TLan_PhyPrint( struct device * );
- static void TLan_PhySelect( struct device * );
- static int TLan_PhyInternalCheck( struct device * );
- static int TLan_PhyInternalService( struct device * );
- static int TLan_PhyDp83840aCheck( struct device * );
+ /***************************************************************
+ * TLan_StartTx
+ *
+ * Returns:
+ * 0 on success, non-zero on failure.
+ * Parms:
+ * skb A pointer to the sk_buff containing the
+ * frame to be sent.
+ * dev The device to send the data on.
+ *
+ * This function adds a frame to the Tx list to be sent
+ * ASAP. First it verifies that the adapter is ready and
+ * there is room in the queue. Then it sets up the next
+ * available list, copies the frame to the corresponding
+ * buffer. If the adapter Tx channel is idle, it gives
+ * the adapter a Tx Go command on the list, otherwise it
+ * sets the forward address of the previous list to point
+ * to this one. Then it frees the sk_buff.
+ *
+ **************************************************************/
+
+int TLan_StartTx( struct sk_buff *skb, struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ TLanList *tail_list;
+ u8 *tail_buffer;
+ int pad;
+
+ if ( ! priv->phyOnline ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: %s PHY is not ready\n", dev->name );
+ dev_kfree_skb( skb, FREE_WRITE );
+ return 0;
+ }
+
+ tail_list = priv->txList + priv->txTail;
+ if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: %s is busy (Head=%d Tail=%d)\n", dev
+->name, priv->txHead, priv->txTail );
+ dev->tbusy = 1;
+ priv->txBusyCount++;
+ return 1;
+ }
+ tail_list->forward = 0;
+ tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
+ memcpy( tail_buffer, skb->data, skb->len );
+ pad = TLAN_MIN_FRAME_SIZE - skb->len;
+ if ( pad > 0 ) {
+ tail_list->frameSize = (u16) skb->len + pad;
+ tail_list->buffer[0].count = (u32) skb->len;
+ tail_list->buffer[1].count = TLAN_LAST_BUFFER | (u32) pad;
+ tail_list->buffer[1].address = virt_to_bus( TLanPadBuffer );
+ } else {
+ tail_list->frameSize = (u16) skb->len;
+ tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+ tail_list->buffer[1].count = 0;
+ tail_list->buffer[1].address = 0;
+ }
+ // are we transferring?
+ cli();
+ tail_list->cStat = TLAN_CSTAT_READY;
+ if ( ! priv->txInProgress ) {
+ priv->txInProgress = 1;
+ outw( 0x4, dev->base_addr + TLAN_HOST_INT );
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Starting TX on buffer %d\n", priv->t
+xTail );
+ outl( virt_to_bus( tail_list ), dev->base_addr + TLAN_CH_PARM );
+ outl( TLAN_HC_GO | TLAN_HC_ACK, dev->base_addr + TLAN_HOST_CMD );
+ } else {
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Adding buffer %d to TX channel\n", p
+riv->txTail );
+ if ( priv->txTail == 0 )
+ ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward = virt_to_bus( tail_lis
+t );
+ else
+ ( priv->txList + ( priv->txTail - 1 ) )->forward = virt_to_bus( tail_list );
+ }
+ sti();
+ priv->txTail++;
+ if ( priv->txTail >= TLAN_NUM_TX_LISTS )
+ priv->txTail = 0;
+
+ dev_kfree_skb( skb, FREE_WRITE );
+
+ dev->trans_start = jiffies;
+ return 0;
- static TLanPhyIdEntry TLanPhyIdTable[] = {
- { 0x4000, 0x5014, &TLan_PhyInternalCheck, &TLan_PhyInternalService, TLAN_PHY_ACTIVITY },
- { 0x4000, 0x5015, &TLan_PhyInternalCheck, &TLan_PhyInternalService, TLAN_PHY_ACTIVITY },
- { 0x2000, 0x5C01, &TLan_PhyDp83840aCheck, &TLan_PhyNop, TLAN_PHY_ACTIVITY | TLAN_PHY_AUTONEG },
- { 0x0000, 0x0000, NULL, NULL, 0 }
- };
+} /* TLan_StartTx */
- /*************************************************************************
- * TLan_PhyPrint
+ /***************************************************************
+ * TLan_HandleInterrupt
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * irq The line on which the interrupt
+ * occurred.
+ * dev_id A pointer to the device assigned to
+ * this irq line.
+ * regs ???
*
- * Returns: Nothing
- * Parms: dev A pointer to the device structure of the adapter
- * which the desired PHY is located.
- *
- * This function prints the registers a PHY.
- *
- ************************************************************************/
+ * This function handles an interrupt generated by its
+ * assigned TLAN adapter. The function deactivates
+ * interrupts on its adapter, records the type of
+ * interrupt, executes the appropriate subhandler, and
+ * acknowdges the interrupt to the adapter (thus
+ * re-enabling adapter interrupts.
+ *
+ **************************************************************/
- void TLan_PhyPrint( struct device *dev )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- u16 i, data0, data1, data2, data3, phy;
- u32 io;
-
- phy = priv->phyAddr;
- io = dev->base_addr;
-
- if ( ( phy > 0 ) || ( phy <= TLAN_PHY_MAX_ADDR ) ) {
- printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
- printk( "TLAN: Off. +0 +1 +2 +3 \n" );
- for ( i = 0; i < 0x20; i+= 4 ) {
- TLan_MiiReadReg( io, phy, i, &data0 );
- TLan_MiiReadReg( io, phy, i + 1, &data1 );
- TLan_MiiReadReg( io, phy, i + 2, &data2 );
- TLan_MiiReadReg( io, phy, i + 3, &data3 );
- printk( "TLAN: 0x%02x 0x%04hx 0x%04hx 0x%04hx 0x%04hx\n", i, data0, data1, data2, data3 );
- }
- } else {
- printk( "TLAN: Device %s, PHY 0x%02x (Invalid).\n", dev->name, phy );
- }
-
- } /* TLan_PhyPrint */
+void TLan_HandleInterrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 ack;
+ struct device *dev;
+ u32 host_cmd;
+ u16 host_int;
+ int type;
+ dev = (struct device *) dev_id;
+ if ( dev->interrupt )
+ printk( "TLAN: Re-entering interrupt handler for %s: %d.\n" , dev->name, dev
+->interrupt );
+ dev->interrupt++;
+ cli();
- /*************************************************************************
- * TLan_PhySelect
- *
- * Returns: Nothing
- * Parms: dev A pointer to the device structure of the adapter
- * for which the PHY needs determined.
- *
- * This function decides which PHY amoung those attached to the TLAN chip
- * is to be used. The TLAN chip can be attached to multiple PHYs, and
- * the driver needs to decide which one to talk to. Currently this
- * routine picks the PHY with the lowest address as the internal PHY
- * address is 0x1F, the highest possible. This strategy assumes that
- * there can be only one other PHY, and, if it exists, it is the one to
- * be used. If token ring PHYs are ever supported, this routine will
- * become a little more interesting...
- *
- ************************************************************************/
-
- void TLan_PhySelect( struct device *dev )
- {
- int err;
- int phy;
- int entry;
- u16 id_hi;
- u16 id_lo;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- u16 val;
-
- priv->phyCheck = &TLan_PhyNop; // Make absolutely sure these aren't NULL
- priv->phyService = &TLan_PhyNop;
-
- for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
- err = TLan_MiiReadReg( dev->base_addr, phy, 0, &val );
- if ( ! err ) {
- TLan_MiiReadReg( dev->base_addr, phy, MII_GEN_ID_HI, &id_hi );
- TLan_MiiReadReg( dev->base_addr, phy, MII_GEN_ID_LO, &id_lo );
- entry = 0;
- while ( ( TLanPhyIdTable[entry].idHi != 0 ) && ( TLanPhyIdTable[entry].idLo != 0 ) ) {
- if ( ( TLanPhyIdTable[entry].idHi == id_hi ) && ( TLanPhyIdTable[entry].idLo == id_lo ) ) {
- priv->phyAddr = phy;
- priv->phyEntry = entry;
- priv->phyCheck = TLanPhyIdTable[entry].check;
- priv->phyService = TLanPhyIdTable[entry].service;
- priv->phyFlags = TLanPhyIdTable[entry].flags;
- break;
- }
- entry++;
- }
- break;
- }
- }
+ host_int = inw( dev->base_addr + TLAN_HOST_INT );
+ outw( host_int, dev->base_addr + TLAN_HOST_INT ); // Deactivate Ints
- } /* TLan_PhySelect */
+ type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
+ ack = TLanIntVector[type]( dev, host_int );
+ sti();
+ if ( ack ) {
+ host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
+ outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
+ }
- /*************************************************************************
- * TLan_PhyNop
- *
- * Returns: Nothing
- * Parms: dev A pointer to a device structure.
- *
- * This function does nothing and is meant as a stand-in for when
- * a Check or Service function would be meaningless.
- *
- ************************************************************************/
+ dev->interrupt--;
- int TLan_PhyNop( struct device *dev )
- {
- dev = NULL;
- return 0;
+} /* TLan_HandleInterrupts */
- } /* TLan_PhyNop */
-
- /*************************************************************************
- * TLan_PhyInternalCheck
- *
- * Returns: Nothing
- * Parms: dev A pointer to a device structure of the adapter
- * holding the PHY to be checked.
+ /***************************************************************
+ * TLan_Close
+ *
+ * Returns:
+ * An error code.
+ * Parms:
+ * dev The device structure of the device to
+ * close.
*
- * This function resets the internal PHY on a TLAN chip. See Chap. 7,
- * "Physical Interface (PHY)" of "ThunderLAN Programmer's Guide"
- *
- ************************************************************************/
-
- int TLan_PhyInternalCheck( struct device *dev )
- {
- u16 gen_ctl;
- u32 io;
- u16 phy;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- u16 value;
- u8 sio;
-
- io = dev->base_addr;
- phy = priv->phyAddr;
-
- TLan_MiiReadReg( io, phy, MII_GEN_CTL, &gen_ctl );
- if ( gen_ctl & MII_GC_PDOWN ) {
- TLan_MiiSync( io );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK );
- udelay(50000);
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_RESET | MII_GC_LOOPBK );
- TLan_MiiSync( io );
- }
+ * This function shuts down the adapter. It records any
+ * stats, puts the adapter into reset state, deactivates
+ * its time as needed, and frees the irq it is using.
+ *
+ **************************************************************/
- TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
- while ( value & MII_GC_RESET )
- TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
-
- // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK | MII_GC_DUPLEX );
- // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_DUPLEX );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0 );
-
- udelay(500000);
-
- TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value );
- if ( aui )
- value |= TLAN_TC_AUISEL;
- else
- value &= ~TLAN_TC_AUISEL;
- TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value );
-
- // Read Possible Latched Link Status
- TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
- // Read Real Link Status
- TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
- if ( ( value & MII_GS_LINK ) || aui ) {
- priv->phyOnline = 1;
- TLan_DioWrite8( io, TLAN_LED_REG, TLAN_LED_LINK );
- } else {
- priv->phyOnline = 0;
- TLan_DioWrite8( io, TLAN_LED_REG, 0 );
- }
+int TLan_Close(struct device *dev)
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- // Enable Interrupts
- TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value );
- value |= TLAN_TC_INTEN;
- TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value );
-
- sio = TLan_DioRead8( io, TLAN_NET_SIO );
- sio |= TLAN_NET_SIO_MINTEN;
- TLan_DioWrite8( io, TLAN_NET_SIO, sio );
-
- return 0;
+ dev->start = 0;
+ dev->tbusy = 1;
- } /* TLanPhyInternalCheck */
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+ outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
+ if ( priv->timerSetAt != 0 )
+ del_timer( &priv->timer );
+ free_irq( dev->irq, dev );
+ TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Device %s closed.\n", dev->name );
+ MOD_DEC_USE_COUNT;
+ return 0;
+} /* TLan_Close */
- /*************************************************************************
- * TLan_PhyInternalService
- *
- * Returns: Nothing
- * Parms: dev A pointer to a device structure of the adapter
- * holding the PHY to be serviced.
- *
- * This function services an interrupt generated by the internal PHY.
- * It can turn on/off the link LED. See Chap. 7,
- * "Physical Interface (PHY)" of "ThunderLAN Programmer's Guide".
- *
- ************************************************************************/
-
- int TLan_PhyInternalService( struct device *dev )
- {
- u16 tlphy_sts;
- u16 gen_sts;
- u16 an_exp;
- u32 io;
- u16 phy;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
-
- io = dev->base_addr;
- phy = priv->phyAddr;
-
- TLan_MiiReadReg( io, phy, TLAN_TLPHY_STS, &tlphy_sts );
- TLan_MiiReadReg( io, phy, MII_GEN_STS, &gen_sts );
- TLan_MiiReadReg( io, phy, MII_AN_EXP, &an_exp );
- if ( ( gen_sts & MII_GS_LINK ) || aui ) {
- priv->phyOnline = 1;
- TLan_DioWrite8( io, TLAN_LED_REG, TLAN_LED_LINK );
- } else {
- priv->phyOnline = 0;
- TLan_DioWrite8( io, TLAN_LED_REG, 0 );
- }
- return 0;
- } /* TLan_PhyInternalService */
+ /***************************************************************
+ * TLan_GetStats
+ *
+ * Returns:
+ * A pointer to the device's statistics structure.
+ * Parms:
+ * dev The device structure to return the
+ * stats for.
+ *
+ * This function updates the devices statistics by reading
+ * the TLAN chip's onboard registers. Then it returns the
+ * address of the statistics structure.
+ *
+ **************************************************************/
+
+struct net_device_stats *TLan_GetStats( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ int i;
+
+ /* Should only read stats if open ? */
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+
+ TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: %s EOC count = %d\n", dev->name, priv-
+>rxEocCount );
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: %s Busy count = %d\n", dev->name, pri
+v->txBusyCount );
+ if ( debug & TLAN_DEBUG_GNRL ) {
+ TLan_PrintDio( dev->base_addr );
+ TLan_PhyPrint( dev );
+ }
+ if ( debug & TLAN_DEBUG_LIST ) {
+ for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
+ TLan_PrintList( priv->rxList + i, "RX", i );
+ for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
+ TLan_PrintList( priv->txList + i, "TX", i );
+ }
+
+ return ( &( (TLanPrivateInfo *) dev->priv )->stats );
+} /* TLan_GetStats */
- /*************************************************************************
- * TLan_PhyDp83840aCheck
- *
- * Returns: Nothing
- * Parms: dev A pointer to a device structure of the adapter
- * holding the PHY to be reset.
- *
- * This function resets a National Semiconductor DP83840A 10/100 Mb/s
- * PHY device. See National Semiconductor's data sheet for more info.
- * This PHY is used on Compaq Netelligent 10/100 cards.
- *
- ************************************************************************/
-
- static int TLan_PhyDp83840aCheck( struct device *dev )
- {
- u16 gen_ctl;
- int i;
- u32 io;
- u16 phy;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- u16 value;
- u8 sio;
-
- io = dev->base_addr;
- phy = priv->phyAddr;
-
- TLan_MiiReadReg( io, phy, MII_GEN_CTL, &gen_ctl );
- if ( gen_ctl & MII_GC_PDOWN ) {
- TLan_MiiSync( io );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK );
- for ( i = 0; i < 500000; i++ )
- SLOW_DOWN_IO;
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_RESET | MII_GC_LOOPBK );
- TLan_MiiSync( io );
- }
- TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
- while ( value & MII_GC_RESET )
- TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
-
- // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK | MII_GC_DUPLEX );
- // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_DUPLEX );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0 );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0x1000 );
- TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0x1200 );
- for ( i = 0; i < 50000; i++ )
- SLOW_DOWN_IO;
-
-/*
- // Read Possible Latched Link Status
- TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
- // Read Real Link Status
- TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
- if ( value & MII_GS_LINK ) {
- priv->phyOnline = 1;
- TLan_DioWrite8( io, TLAN_LED_REG, TLAN_LED_LINK );
- } else {
- priv->phyOnline = 0;
- TLan_DioWrite8( io, TLAN_LED_REG, 0 );
+ /***************************************************************
+ * TLan_SetMulticastList
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure to set the
+ * multicast list for.
+ *
+ * This function sets the TLAN adaptor to various receive
+ * modes. If the IFF_PROMISC flag is set, promiscuous
+ * mode is acitviated. Otherwise, promiscuous mode is
+ * turned off. If the IFF_ALLMULTI flag is set, then
+ * the hash table is set to receive all group addresses.
+ * Otherwise, the first three multicast addresses are
+ * stored in AREG_1-3, and the rest are selected via the
+ * hash table, as necessary.
+ *
+ **************************************************************/
+
+void TLan_SetMulticastList( struct device *dev )
+{
+ struct dev_mc_list *dmi = dev->mc_list;
+ u32 hash1 = 0;
+ u32 hash2 = 0;
+ int i;
+ u32 offset;
+ u8 tmp;
+
+ if ( dev->flags & IFF_PROMISC ) {
+ tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
+ } else {
+ tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
+ if ( dev->flags & IFF_ALLMULTI ) {
+ for ( i = 0; i < 3; i++ )
+ TLan_SetMac( dev, i + 1, NULL );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
+ } else {
+ for ( i = 0; i < dev->mc_count; i++ ) {
+ if ( i < 3 ) {
+ TLan_SetMac( dev, i + 1, (char *) &dmi->dmi_addr );
+ } else {
+ offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
+ if ( offset < 32 )
+ hash1 |= ( 1 << offset );
+ else
+ hash2 |= ( 1 << ( offset - 32 ) );
+ }
+ dmi = dmi->next;
}
+ for ( ; i < 3; i++ )
+ TLan_SetMac( dev, i + 1, NULL );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
+ TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
+ }
+ }
- // Enable Interrupts
- TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value );
- value |= TLAN_TC_INTEN;
- TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value );
-*/
- sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
- sio &= ~TLAN_NET_SIO_MINTEN;
- TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
- priv->phyOnline = 1;
-
- return 0;
-
- } /* TLan_PhyDp83840aCheck */
-
+} /* TLan_SetMulticastList */
/*****************************************************************************
******************************************************************************
- ThunderLAN Driver Adapter Related Routines
+ ThunderLAN Driver Interrupt Vectors and Table
+
+ Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
+ Programmer's Guide" for more informations on handling interrupts
+ generated by TLAN based adapters.
******************************************************************************
*****************************************************************************/
+ /***************************************************************
+ * TLan_HandleInvalid
+ *
+ * Returns:
+ * 0
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles invalid interrupts. This should
+ * never happen unless some other adapter is trying to use
+ * the IRQ line assigned to the device.
+ *
+ **************************************************************/
- static void TLan_ResetLists( struct device * );
- static void TLan_PrintDio( u16 );
- static void TLan_PrintList( TLanList *, char *, int );
- static void TLan_ReadAndClearStats( struct device *, int );
- static int TLan_Reset( struct device * );
- static void TLan_SetMac( struct device *, int areg, char *mac );
-
-
-
-
- /*************************************************************************
- * TLan_ResetLists
- *
- * Returns: Nothing
- * Parms: dev The device structure with the list stuctures to
- * be reset.
- *
- * This routine sets the variables associated with managing the TLAN
- * lists to their initial values.
- *
- ************************************************************************/
-
- void TLan_ResetLists( struct device *dev )
- {
- int i;
- TLanList *list;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
-
- priv->txHead = 0;
- priv->txTail = 0;
- for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
- list = priv->txList + i;
- list->cStat = TLAN_CSTAT_UNUSED;
- list->buffer[0].address = virt_to_bus( priv->txBuffer + ( i * TLAN_MAX_FRAME_SIZE ) );
- list->buffer[2].count = 0;
- list->buffer[2].address = 0;
- }
-
- priv->rxHead = 0;
- priv->rxTail = TLAN_NUM_RX_LISTS - 1;
- for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
- list = priv->rxList + i;
- list->cStat = TLAN_CSTAT_READY;
- list->frameSize = TLAN_MAX_FRAME_SIZE;
- list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
- list->buffer[0].address = virt_to_bus( priv->rxBuffer + ( i * TLAN_MAX_FRAME_SIZE ) );
- list->buffer[1].count = 0;
- list->buffer[1].address = 0;
- if ( i < TLAN_NUM_RX_LISTS - 1 )
- list->forward = virt_to_bus( list + 1 );
- else
- list->forward = 0;
- }
-
- } /* TLan_ResetLists */
-
+u32 TLan_HandleInvalid( struct device *dev, u16 host_int )
+{
+ host_int = 0;
+ // printk( "TLAN: Invalid interrupt on %s.\n", dev->name );
+ return 0;
+} /* TLan_HandleInvalid */
- /*************************************************************************
- * TLan_PrintDio
- *
- * Returns: Nothing
- * Parms: io_base Base IO port of the device of which to print
- * DIO registers.
- *
- * This function prints out all the the internal (DIO) registers of a
- * TLAN chip.
- *
- ************************************************************************/
-
- void TLan_PrintDio( u16 io_base )
- {
- u32 data0, data1;
- int i;
-
- printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n", io_base );
- printk( "TLAN: Off. +0 +4\n" );
- for ( i = 0; i < 0x4C; i+= 8 ) {
- data0 = TLan_DioRead32( io_base, i );
- data1 = TLan_DioRead32( io_base, i + 0x4 );
- printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 );
- }
- } /* TLan_PrintDio */
+ /***************************************************************
+ * TLan_HandleTxEOF
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles Tx EOF interrupts which are raised
+ * by the adapter when it has completed sending the
+ * contents of a buffer. If detemines which list/buffer
+ * was completed and resets it. If the buffer was the last
+ * in the channel (EOC), then the function checks to see if
+ * another buffer is ready to send, and if so, sends a Tx
+ * Go command. Finally, the driver activates/continues the
+ * activity LED.
+ *
+ **************************************************************/
+
+u32 TLan_HandleTxEOF( struct device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ int eoc = 0;
+ TLanList *head_list;
+ u32 ack = 1;
+
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n",
+ priv->txHead, priv->txTail );
+ host_int = 0;
+ head_list = priv->txList + priv->txHead;
+ if ( head_list->cStat & TLAN_CSTAT_EOC )
+ eoc = 1;
+ if ( ! head_list->cStat & TLAN_CSTAT_FRM_CMP ) {
+ printk( "TLAN: Received interrupt for uncompleted TX frame.\n" );
+ }
+ // printk( "Ack %d CSTAT=%hx\n", priv->txHead, head_list->cStat );
+#if LINUX_KERNEL_VERSION > 0x20100
+ priv->stats->tx_bytes += head_list->frameSize;
+#endif
+ head_list->cStat = TLAN_CSTAT_UNUSED;
+ dev->tbusy = 0;
+ priv->txHead++;
+ if ( priv->txHead >= TLAN_NUM_TX_LISTS )
+ priv->txHead = 0;
+ if ( eoc ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n"
+, priv->txHead, priv->txTail );
+ head_list = priv->txList + priv->txHead;
+ if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
+ outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO;
+ } else {
+ priv->txInProgress = 0;
+ }
+ }
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+ if ( priv->phyFlags & TLAN_PHY_ACTIVITY ) {
+ if ( priv->timerSetAt == 0 ) {
+ // printk("TxEOF Starting timer...\n");
+ priv->timerSetAt = jiffies;
+ priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+ priv->timerType = TLAN_TIMER_ACT;
+ add_timer( &priv->timer );
+ } else if ( priv->timerType == TLAN_TIMER_ACT ) {
+ priv->timerSetAt = jiffies;
+ // printk("TxEOF continuing timer...\n");
+ }
+ }
- /*************************************************************************
- * TLan_PrintList
- *
- * Returns: Nothing
- * Parms: list A pointer to the TLanList structure to be printed.
- * type A string to designate type of list, "Rx" or "Tx".
- * num The index of the list.
- *
- * This function prints out the contents of the list pointed to by the
- * list parameter.
- *
- ************************************************************************/
-
- void TLan_PrintList( TLanList *list, char *type, int num)
- {
- int i;
-
- printk( "TLAN: %s List %d at 0x%08x\n", type, num, (u32) list );
- printk( "TLAN: Forward = 0x%08x\n", list->forward );
- printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
- printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
- // for ( i = 0; i < 10; i++ ) {
- for ( i = 0; i < 2; i++ ) {
- printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n", i, list->buffer[i].count, list->buffer[i].address );
- }
+ return ack;
- } /* TLan_PrintList */
+} /* TLan_HandleTxEOF */
- /*************************************************************************
- * TLan_ReadAndClearStats
+ /***************************************************************
+ * TLan_HandleStatOverflow
*
- * Returns: Nothing
- * Parms: dev Pointer to device structure of adapter to which
- * to read stats.
- * record Flag indicating whether to add
- *
- * This functions reads all the internal status registers of the TLAN
- * chip, which clears them as a side effect. It then either adds the
- * values to the device's status struct, or discards them, depending
- * on whether record is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
- *
- ************************************************************************/
-
- void TLan_ReadAndClearStats( struct device *dev, int record )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- u32 tx_good, tx_under;
- u32 rx_good, rx_over;
- u32 def_tx, crc, code;
- u32 multi_col, single_col;
- u32 excess_col, late_col, loss;
-
- outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
- tx_good = inb( dev->base_addr + TLAN_DIO_DATA );
- tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
- tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
- tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
-
- outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
- rx_good = inb( dev->base_addr + TLAN_DIO_DATA );
- rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
- rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
- rx_over = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
-
- outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
- def_tx = inb( dev->base_addr + TLAN_DIO_DATA );
- def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
- crc = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
- code = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
-
- outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
- multi_col = inb( dev->base_addr + TLAN_DIO_DATA );
- multi_col += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
- single_col = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
- single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
-
- outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
- excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
- late_col = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
- loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
-
- if ( record ) {
- priv->stats.rx_packets += rx_good;
- priv->stats.rx_errors += rx_over + crc + code;
- priv->stats.tx_packets += tx_good;
- priv->stats.tx_errors += tx_under + loss;
- priv->stats.collisions += multi_col + single_col + excess_col + late_col;
-
- priv->stats.rx_over_errors += rx_over;
- priv->stats.rx_crc_errors += crc;
- priv->stats.rx_frame_errors += code;
-
- priv->stats.tx_aborted_errors += tx_under;
- priv->stats.tx_carrier_errors += loss;
- }
-
- } /* TLan_ReadAndClearStats */
-
-
-
-
- /*************************************************************************
- * TLan_Reset
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
*
- * Returns: 0
- * Parms: dev Pointer to device structure of adapter to be
- * reset.
- *
- * This function resets the adapter and it's physical device. See
- * Chap. 3, pp. 9-10 of the "ThunderLAN Programmer's Guide" for details.
- * The routine tries to implement what is detailed there, though
- * adjustments have been made.
- *
- ************************************************************************/
-
- int TLan_Reset( struct device *dev )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- int i;
- u32 data;
- u8 data8;
-
- // 1. Assume Stat registers have been dealt with.
- // 2. Assert reset bit.
- data = inl(dev->base_addr + TLAN_HOST_CMD);
- data |= TLAN_HC_AD_RST;
- outl(data, dev->base_addr + TLAN_HOST_CMD);
- // 3. Turn off interrupts.
- data = inl(dev->base_addr + TLAN_HOST_CMD);
- data |= TLAN_HC_INT_OFF;
- outl(data, dev->base_addr + TLAN_HOST_CMD);
- // 4. Setup AREGs and HASHs.
- for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 )
- TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
- // 5. Setup NetConfig register.
- outw(TLAN_NET_CONFIG, dev->base_addr + TLAN_DIO_ADR);
- outw(TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN, dev->base_addr + TLAN_DIO_DATA);
- // 6. Setup BSIZE register.
- // Accept defaults, 0x22, for now.
- // 7. Setup TX commit in Acommit.
- // Allow it to manage itself.
- // 8. Load Ld_Tmr in HOST_CMD.
- // I don't know what this value should be. I'll try 3.
- outl( TLAN_HC_LD_TMR | 0x0, dev->base_addr + TLAN_HOST_CMD );
- // 9. Load Ld_Thr in HOST_CMD.
- // Try 1 for now.
- outl( TLAN_HC_LD_THR | 0x1, dev->base_addr + TLAN_HOST_CMD );
- // 10. Unreset the MII by setting NMRST (in NetSio) to 1.
- outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
- TLan_SetBit( TLAN_NET_SIO_NMRST, dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO );
- // 10a. Other.
- // 12. Setup the NetMask register.
- if ( priv->tlanRev >= 0x30 )
- TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, TLAN_ID_TX_EOC | TLAN_ID_RX_EOC );
- //TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP | TLAN_NET_CMD_DUPLEX | TLAN_NET_CMD_CAF );
- TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP );
- // 11. Initialize PHYs.
- TLan_PhySelect( dev );
- (*priv->phyCheck)( dev );
-
- //data8 = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5 | TLAN_NET_MASK_MASK6 | TLAN_NET_MASK_MASK7;
- data8 = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5 | TLAN_NET_MASK_MASK7;
- TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data8 );
- TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, 1550 );
- /*
- * 13. Turn on interrupts to host.
- * I don't want any interrupts, yet.
- */
- /*
- data = inl(base_port + TLAN_HOST_CMD);
- data |= TLAN_HC_INT_ON;
- outl(data, base_port + TLAN_HOST_CMD);
- */
-
- return 0;
-
- } /* TLan_Reset */
-
-
-
-
- /*************************************************************************
- * TLan_SetMac
+ * This function handles the Statistics Overflow interrupt
+ * which means that one or more of the TLAN statistics
+ * registers has reached 1/2 capacity and needs to be read.
*
- * Returns: Nothing
- * Parms: dev Pointer to device structure of adapter on which to
- * change the AREG.
- * areg The AREG to set the address in (0 - 3).
- * mac A pointer to an array of chars. Each element
- * stores one byte of the address. IE, it isn't
- * in ascii.
- *
- * This function transfers a MAC address to one of the TLAN AREGs
- * (address registers). The TLAN chip locks the register on writing to
- * offset 0 and unlocks the register after writing to offset 5. If NULL
- * is passed in mac, then the AREG is filled with 0's.
- *
- ************************************************************************/
-
- void TLan_SetMac( struct device *dev, int areg, char *mac )
- {
- int i;
-
- areg *= 6;
+ **************************************************************/
- if ( mac != NULL ) {
- for ( i = 0; i < 6; i++ )
- TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, mac[i] );
- } else {
- for ( i = 0; i < 6; i++ )
- TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, 0 );
- }
+u32 TLan_HandleStatOverflow( struct device *dev, u16 host_int )
+{
+ host_int = 0;
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
- } /* TLan_SetMac */
+ return 1;
+} /* TLan_HandleStatOverflow */
-/*****************************************************************************
-******************************************************************************
- ThunderLAN Driver Eeprom routines
+ /***************************************************************
+ * TLan_HandleRxEOF
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles the Rx EOF interrupt which
+ * indicates a frame has been received by the adapter from
+ * the net and the frame has been transferred to memory.
+ * The function determines the bounce buffer the frame has
+ * been loaded into, creates a new sk_buff big enough to
+ * hold the frame, and sends it to protocol stack. It
+ * then resets the used buffer and appends it to the end
+ * of the list. If the frame was the last in the Rx
+ * channel (EOC), the function restarts the receive channel
+ * by sending an Rx Go command to the adapter. Then it
+ * activates/continues the the activity LED.
+ *
+ **************************************************************/
+
+u32 TLan_HandleRxEOF( struct device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ u32 ack = 1;
+ int eoc = 0;
+ u8 *head_buffer;
+ TLanList *head_list;
+ struct sk_buff *skb;
+ TLanList *tail_list;
+ void *t;
+
+ TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n",
+priv->rxHead, priv->rxTail );
+ host_int = 0;
+ head_list = priv->rxList + priv->rxHead;
+ tail_list = priv->rxList + priv->rxTail;
+ if ( head_list->cStat & TLAN_CSTAT_EOC )
+ eoc = 1;
+ if ( ! head_list->cStat & TLAN_CSTAT_FRM_CMP ) {
+ printk( "TLAN: Received interrupt for uncompleted RX frame.\n" );
+ } else {
+ skb = dev_alloc_skb( head_list->frameSize + 7 );
+ if ( skb == NULL ) {
+ printk( "TLAN: Couldn't allocate memory for received data.\n" );
+ } else {
+ head_buffer = priv->rxBuffer + ( priv->rxHead * TLAN_MAX_FRAME_SIZE );
+ skb->dev = dev;
+ skb_reserve( skb, 2 );
+ t = (void *) skb_put( skb, head_list->frameSize );
+ // printk( " %hd %p %p\n", head_list->frameSize, skb->data, t );
- The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A EEPROM.
- These functions are based on information in Microchip's data sheet. I
- don't know how well this functions will work with other EEPROMs.
+#if LINUX_KERNEL_VERSION > 0x20100
+ priv->stats->rx_bytes += head_list->frameSize;
+#endif
-******************************************************************************
-*****************************************************************************/
+ memcpy( t, head_buffer, head_list->frameSize );
+ skb->protocol = eth_type_trans( skb, dev );
+ netif_rx( skb );
+ }
+ }
+ head_list->forward = 0;
+ head_list->frameSize = TLAN_MAX_FRAME_SIZE;
+ head_list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
+ tail_list->forward = virt_to_bus( head_list );
+ priv->rxHead++;
+ if ( priv->rxHead >= TLAN_NUM_RX_LISTS )
+ priv->rxHead = 0;
+ priv->rxTail++;
+ if ( priv->rxTail >= TLAN_NUM_RX_LISTS )
+ priv->rxTail = 0;
+ if ( eoc ) {
+ TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n",
+ priv->rxHead, priv->rxTail );
+ head_list = priv->rxList + priv->rxHead;
+ outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO | TLAN_HC_RT;
+ priv->rxEocCount++;
+ }
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+ if ( priv->phyFlags & TLAN_PHY_ACTIVITY ) {
+ if ( priv->timerSetAt == 0 ) {
+ // printk("RxEOF Starting timer...\n");
+ priv->timerSetAt = jiffies;
+ priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
+ priv->timerType = TLAN_TIMER_ACT;
+ add_timer( &priv->timer );
+ } else if ( priv->timerType == TLAN_TIMER_ACT ) {
+ // printk("RxEOF tarting continuing timer...\n");
+ priv->timerSetAt = jiffies;
+ }
+ }
+ dev->last_rx = jiffies;
- static void TLan_EeSendStart( u16 );
- static int TLan_EeSendByte( u16, u8, int );
- static void TLan_EeReceiveByte( u16, u8 *, int );
- static int TLan_EeReadByte( u16, u8, u8 * );
+ return ack;
+} /* TLan_HandleRxEOF */
- /*************************************************************************
- * TLan_EeSendStart
+
+ /***************************************************************
+ * TLan_HandleDummy
*
- * Returns: Nothing
- * Parms: io_base The IO port base address for the TLAN device
- * with the EEPROM to use.
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
*
- * This function sends a start cycle to an EEPROM attached to a TLAN
- * chip.
+ * This function handles the Dummy interrupt, which is
+ * raised whenever a test interrupt is generated by setting
+ * the Req_Int bit of HOST_CMD to 1.
*
- ************************************************************************/
+ **************************************************************/
- void TLan_EeSendStart( u16 io_base )
- {
- u16 sio;
+u32 TLan_HandleDummy( struct device *dev, u16 host_int )
+{
+ host_int = 0;
+ printk( "TLAN: Dummy interrupt on %s.\n", dev->name );
+ return 1;
- outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
- sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+} /* TLan_HandleDummy */
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
- TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
- //
- // FIXME: Do I really need these SLOW_DOWN_IOs?
- //
- SLOW_DOWN_IO;
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
- SLOW_DOWN_IO;
- TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- SLOW_DOWN_IO;
- } /* TLan_EeSendStart */
+ /***************************************************************
+ * TLan_HandleTxEOC
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This driver is structured to determine EOC occurances by
+ * reading the CSTAT member of the list structure. Tx EOC
+ * interrupts are disabled via the DIO INTDIS register.
+ * However, TLAN chips before revision 3.0 didn't have this
+ * functionality, so process EOC events if this is the
+ * case.
+ *
+ **************************************************************/
+u32 TLan_HandleTxEOC( struct device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ TLanList *head_list;
+ u32 ack = 1;
- /*************************************************************************
- * TLan_EeSendByte
- *
- * Returns: If the correct ack was received, 0, otherwise 1
- * Parms: io_base The IO port base address for the TLAN device
- * with the EEPROM to use.
- * data The 8 bits of information to send to the
- * EEPROM.
- * stop If TLAN_EEPROM_STOP is passed, a stop cycle is
- * sent after the byte is sent after the ack is
- * read.
- *
- * This function sends a byte on the serial EEPROM line, driving the
- * clock to send each bit. The function then reverses transmission
- * direction and reads an acknowledge bit.
- *
- ************************************************************************/
-
- int TLan_EeSendByte( u16 io_base, u8 data, int stop )
- {
- int err;
- u8 place;
- u16 sio;
-
- outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
- sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
-
- // Assume clock is low, tx is enabled;
- for ( place = 0x80; place; place >>= 1 ) {
- if ( place & data )
- TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
- else
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- }
- TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
- TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
-
- if ( ( ! err ) && stop ) {
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); // STOP, raise data while clock is high
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
- }
+ host_int = 0;
+ if ( priv->tlanRev < 0x30 ) {
+ TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Handling TX EOC (Head=%d Tail=%d) --
+ IRQ\n", priv->txHead, priv->txTail );
+ head_list = priv->txList + priv->txHead;
+ if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
+ outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO;
+ } else {
+ priv->txInProgress = 0;
+ }
+ }
- return ( err );
+ return ack;
- } /* TLan_EeSendByte */
+} /* TLan_HandleTxEOC */
- /*************************************************************************
- * TLan_EeReceiveByte
+ /***************************************************************
+ * TLan_HandleStatusCheck
*
- * Returns: Nothing
- * Parms: io_base The IO port base address for the TLAN device
- * with the EEPROM to use.
- * data An address to a char to hold the data sent
- * from the EEPROM.
- * stop If TLAN_EEPROM_STOP is passed, a stop cycle is
- * sent after the byte is received, and no ack is
- * sent.
- *
- * This function receives 8 bits of data from the EEPROM over the serial
- * link. It then sends and ack bit, or no ack and a stop bit. This
- * function is used to retrieve data after the address of a byte in the
- * EEPROM has been sent.
- *
- ************************************************************************/
-
- void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
- {
- u8 place;
- u16 sio;
-
- outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
- sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
- *data = 0;
-
- // Assume clock is low, tx is enabled;
- TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
- for ( place = 0x80; place; place >>= 1 ) {
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
- *data |= place;
- TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- }
+ * Returns:
+ * 0 if Adapter check, 1 if Network Status check.
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This function handles Adapter Check/Network Status
+ * interrupts generated by the adapter. It checks the
+ * vector in the HOST_INT register to determine if it is
+ * an Adapter Check interrupt. If so, it resets the
+ * adapter. Otherwise it clears the status registers
+ * and services the PHY.
+ *
+ **************************************************************/
- TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
- if ( ! stop ) {
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); // Ack = 0
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+u32 TLan_HandleStatusCheck( struct device *dev, u16 host_int )
+{
+ u32 ack;
+ u32 error;
+ u8 net_sts;
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+
+ ack = 1;
+ if ( host_int & TLAN_HI_IV_MASK ) {
+ error = inl( dev->base_addr + TLAN_CH_PARM );
+ printk( "TLAN: Adaptor Check on device %s err = 0x%x\n", dev->name, error );
+ TLan_ReadAndClearStats( dev, TLAN_RECORD );
+ outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
+ TLan_ResetLists( dev );
+ TLan_Reset( dev );
+ dev->tbusy = 0;
+ TLan_SetMac( dev, 0, dev->dev_addr );
+ if ( priv->timerType == 0 ) {
+ if ( priv->phyFlags & TLAN_PHY_AUTONEG ) {
+ priv->timer.expires = jiffies + TLAN_TIMER_LINK_DELAY;
+ priv->timerSetAt = jiffies;
+ priv->timerType = TLAN_TIMER_LINK;
+ add_timer( &priv->timer );
} else {
- TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); // No ack = 1 (?)
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); // STOP, raise data while clock is high
- TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ //printk( " RX GO---->\n" );
+ outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
+ outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
}
+ }
+ ack = 0;
+ } else {
+ net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
+ if ( net_sts )
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
+ if ( net_sts & TLAN_NET_STS_MIRQ ) {
+ (*priv->phyService)( dev );
+ if (debug) {
+ TLan_PhyPrint( dev );
+ }
+ }
+ TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Status Check! %s Net_Sts=%x\n", dev->name,
+(unsigned) net_sts );
+ }
- } /* TLan_EeReceiveByte */
+ return ack;
+} /* TLan_HandleStatusCheck */
- /*************************************************************************
- * TLan_EeReadByte
- *
- * Returns: No error = 0, else, the stage at which the error occured.
- * Parms: io_base The IO port base address for the TLAN device
- * with the EEPROM to use.
- * ee_addr The address of the byte in the EEPROM whose
- * contents are to be retrieved.
- * data An address to a char to hold the data obtained
- * from the EEPROM.
- *
- * This function reads a byte of information from an byte cell in the
- * EEPROM.
- *
- ************************************************************************/
-
- int TLan_EeReadByte( u16 io_base, u8 ee_addr, u8 *data )
- {
- int err;
-
- cli();
-
- TLan_EeSendStart( io_base );
- err = TLan_EeSendByte( io_base, 0xA0, TLAN_EEPROM_ACK );
- if (err)
- return 1;
- err = TLan_EeSendByte( io_base, ee_addr, TLAN_EEPROM_ACK );
- if (err)
- return 2;
- TLan_EeSendStart( io_base );
- err = TLan_EeSendByte( io_base, 0xA1, TLAN_EEPROM_ACK );
- if (err)
- return 3;
- TLan_EeReceiveByte( io_base, data, TLAN_EEPROM_STOP );
- sti();
+ /***************************************************************
+ * TLan_HandleRxEOC
+ *
+ * Returns:
+ * 1
+ * Parms:
+ * dev Device assigned the IRQ that was
+ * raised.
+ * host_int The contents of the HOST_INT
+ * port.
+ *
+ * This driver is structured to determine EOC occurances by
+ * reading the CSTAT member of the list structure. Rx EOC
+ * interrupts are disabled via the DIO INTDIS register.
+ * However, TLAN chips before revision 3.0 didn't have this
+ * CSTAT member or a INTDIS register, so if this chip is
+ * pre-3.0, process EOC interrupts normally.
+ *
+ **************************************************************/
+
+u32 TLan_HandleRxEOC( struct device *dev, u16 host_int )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ TLanList *head_list;
+ u32 ack = 1;
+
+ host_int = 0;
+ if ( priv->tlanRev < 0x30 ) {
+ TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: Handling RX EOC (Head=%d Tail=%d) --
+IRQ\n", priv->rxHead, priv->rxTail );
+ head_list = priv->rxList + priv->rxHead;
+ outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
+ ack |= TLAN_HC_GO | TLAN_HC_RT;
+ priv->rxEocCount++;
+ }
- return 0;
+ return ack;
- } /* TLan_EeReadByte */
+} /* TLan_HandleRxEOC */
@@ -1183,422 +1385,427 @@
/*****************************************************************************
******************************************************************************
- ThunderLAN Driver Interrupt Vectors and Table
-
- Please see Chap. 4, "Interrupt Handling" of the
- "ThunderLAN Programmer's Guide" for more informations on handling
- interrupts generated by TLAN based adapters.
+ ThunderLAN Driver Timer Function
******************************************************************************
*****************************************************************************/
- static u32 TLan_HandleInvalid( struct device *, u16 );
- static u32 TLan_HandleTxEOF( struct device *, u16 );
- static u32 TLan_HandleStatOverflow( struct device *, u16 );
- static u32 TLan_HandleRxEOF( struct device *, u16 );
- static u32 TLan_HandleDummy( struct device *, u16 );
- static u32 TLan_HandleTxEOC( struct device *, u16 );
- static u32 TLan_HandleStatusCheck( struct device *, u16 );
- static u32 TLan_HandleRxEOC( struct device *, u16 );
-
-
-
-
- typedef u32 (TLanIntVectorFunc)( struct device *, u16 );
-
-
-
-
- /*************************************************************************
- * TLan_HandleInvalid
- *
- * Returns: 0
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This function handles invalid interrupts. This should never happen
- * unless some other adapter is trying to use the IRQ line assigned to
- * the device.
- *
- ************************************************************************/
-
- u32 TLan_HandleInvalid( struct device *dev, u16 host_int )
- {
- host_int = 0;
- // printk( "TLAN: Invalid interrupt on %s.\n", dev->name );
- return 0;
- } /* TLan_HandleInvalid */
-
-
- /*************************************************************************
- * TLan_HandleTxEOF
+ /***************************************************************
+ * TLan_Timer
*
- * Returns: 1
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This function handles Tx EOF interrupts which are raised by the
- * adapter when it has completed sending the contents of a buffer. If
- * detemines which list/buffer was completed and resets it. If the
- * buffer was the last in the channel (EOC), then the function checks
- * to see if another buffer is ready to send, and if so, sends a Tx Go
- * command. Finally, the driver activates/continues the activity LED.
- *
- ************************************************************************/
-
- u32 TLan_HandleTxEOF( struct device *dev, u16 host_int )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- int eoc = 0;
- TLanList *head_list;
- u32 ack = 1;
-
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
- host_int = 0;
- head_list = priv->txList + priv->txHead;
- if ( head_list->cStat & TLAN_CSTAT_EOC )
- eoc = 1;
- if ( ! head_list->cStat & TLAN_CSTAT_FRM_CMP ) {
- printk( "TLAN: Received interrupt for uncompleted TX frame.\n" );
- }
- // printk( "Ack %d CSTAT=%hx\n", priv->txHead, head_list->cStat );
-
-#if LINUX_KERNEL_VERSION > 0x20100
- priv->stats->tx_bytes += head_list->frameSize;
-#endif
-
- head_list->cStat = TLAN_CSTAT_UNUSED;
- dev->tbusy = 0;
- priv->txHead++;
- if ( priv->txHead >= TLAN_NUM_TX_LISTS )
- priv->txHead = 0;
- if ( eoc ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
- head_list = priv->txList + priv->txHead;
- if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
- outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
- ack |= TLAN_HC_GO;
- } else {
- priv->txInProgress = 0;
- }
+ * Returns:
+ * Nothing
+ * Parms:
+ * data A value given to add timer when
+ * add_timer was called.
+ *
+ * This function handles timed functionality for the
+ * TLAN driver. The two current timer uses are for
+ * delaying for autonegotionation and driving the ACT LED.
+ * - Autonegotiation requires being allowed about
+ * 2 1/2 seconds before attempting to transmit a
+ * packet. It would be a very bad thing to hang
+ * the kernel this long, so the driver doesn't
+ * allow transmission 'til after this time, for
+ * certain PHYs. It would be much nicer if all
+ * PHYs were interrupt-capable like the internal
+ * PHY.
+ * - The ACT LED, which shows adapter activity, is
+ * driven by the driver, and so must be left on
+ * for a short period to power up the LED so it
+ * can be seen. This delay can be changed by
+ * changing the TLAN_TIMER_ACT_DELAY in tlan.h,
+ * if desired. 10 jiffies produces a slightly
+ * sluggish response.
+ *
+ **************************************************************/
+
+void TLan_Timer( unsigned long data )
+{
+ struct device *dev = (struct device *) data;
+ u16 gen_sts;
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+
+ // printk( "TLAN: %s Entered Timer, type = %d\n", dev->name, priv->timerType )
+;
+
+ switch ( priv->timerType ) {
+ case TLAN_TIMER_LINK:
+ TLan_MiiReadReg( dev->base_addr, priv->phyAddr, MII_GEN_STS, &gen_sts );
+ if ( gen_sts & MII_GS_LINK ) {
+ priv->phyOnline = 1;
+ outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
+ outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
+ priv->timerSetAt = 0;
+ priv->timerType = 0;
+ } else {
+ priv->timer.expires = jiffies + ( TLAN_TIMER_LINK_DELAY * 2 );
+ add_timer( &priv->timer );
}
- TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
- if ( priv->phyFlags & TLAN_PHY_ACTIVITY ) {
- if ( priv->timerSetAt == 0 ) {
- // printk("TxEOF Starting timer...\n");
- priv->timerSetAt = jiffies;
- priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
- priv->timerType = TLAN_TIMER_ACT;
- add_timer( &priv->timer );
- } else if ( priv->timerType == TLAN_TIMER_ACT ) {
- priv->timerSetAt = jiffies;
- // printk("TxEOF continuing timer...\n");
- }
+ break;
+ case TLAN_TIMER_ACT:
+ if ( jiffies - priv->timerSetAt >= TLAN_TIMER_ACT_DELAY ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+ priv->timerSetAt = 0;
+ priv->timerType = 0;
+ } else {
+ priv->timer.expires = priv->timerSetAt + TLAN_TIMER_ACT_DELAY;
+ add_timer( &priv->timer );
}
+ break;
+ default:
+ break;
+ }
- return ack;
+} /* TLan_Timer */
- } /* TLan_HandleTxEOF */
+/*****************************************************************************
+******************************************************************************
- /*************************************************************************
- * TLan_HandleStatOverflow
- *
- * Returns: 1
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This function handles the Statistics Overflow interrupt which means
- * that one or more of the TLAN statistics registers has reached 1/2
- * capacity and needs to be read.
- *
- ************************************************************************/
+ ThunderLAN Driver Adapter Related Routines
+
+******************************************************************************
+*****************************************************************************/
- u32 TLan_HandleStatOverflow( struct device *dev, u16 host_int )
- {
- host_int = 0;
- TLan_ReadAndClearStats( dev, TLAN_RECORD );
- return 1;
+ /***************************************************************
+ * TLan_ResetLists
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev The device structure with the list
+ * stuctures to be reset.
+ *
+ * This routine sets the variables associated with managing
+ * the TLAN lists to their initial values.
+ *
+ **************************************************************/
+
+void TLan_ResetLists( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ int i;
+ TLanList *list;
+
+ priv->txHead = 0;
+ priv->txTail = 0;
+ for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
+ list = priv->txList + i;
+ list->cStat = TLAN_CSTAT_UNUSED;
+ list->buffer[0].address = virt_to_bus( priv->txBuffer + ( i * TLAN_MAX_FRAME_S
+IZE ) );
+ list->buffer[2].count = 0;
+ list->buffer[2].address = 0;
+ }
+
+ priv->rxHead = 0;
+ priv->rxTail = TLAN_NUM_RX_LISTS - 1;
+ for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
+ list = priv->rxList + i;
+ list->cStat = TLAN_CSTAT_READY;
+ list->frameSize = TLAN_MAX_FRAME_SIZE;
+ list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
+ list->buffer[0].address = virt_to_bus( priv->rxBuffer + ( i * TLAN_MAX_FRAME_S
+IZE ) );
+ list->buffer[1].count = 0;
+ list->buffer[1].address = 0;
+ if ( i < TLAN_NUM_RX_LISTS - 1 )
+ list->forward = virt_to_bus( list + 1 );
+ else
+ list->forward = 0;
+ }
- } /* TLan_HandleStatOverflow */
+} /* TLan_ResetLists */
- /*************************************************************************
- * TLan_HandleRxEOF
+ /***************************************************************
+ * TLan_PrintDio
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base Base IO port of the device of
+ * which to print DIO registers.
*
- * Returns: 1
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This function handles the Rx EOF interrupt which indicates a frame
- * has been received by the adapter from the net and the frame has been
- * transferred to memory. The function determines the bounce buffer
- * the frame has been loaded into, creates a new sk_buff big enough to
- * hold the frame, and sends it to protocol stack. It then resets the
- * used buffer and appends it to the end of the list. If the frame was
- * the last in the Rx channel (EOC), the function restarts the receive
- * channel by sending an Rx Go command to the adapter. Then it activates/
- * continues the the activity LED.
- *
- ************************************************************************/
-
- u32 TLan_HandleRxEOF( struct device *dev, u16 host_int )
- {
- u32 ack = 1;
- int eoc = 0;
- u8 *head_buffer;
- TLanList *head_list;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- struct sk_buff *skb;
- TLanList *tail_list;
- void *t;
-
- TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
- host_int = 0;
- head_list = priv->rxList + priv->rxHead;
- tail_list = priv->rxList + priv->rxTail;
- if ( head_list->cStat & TLAN_CSTAT_EOC )
- eoc = 1;
- if ( ! head_list->cStat & TLAN_CSTAT_FRM_CMP ) {
- printk( "TLAN: Received interrupt for uncompleted RX frame.\n" );
- } else {
- skb = dev_alloc_skb( head_list->frameSize + 7 );
- if ( skb == NULL ) {
- printk( "TLAN: Couldn't allocate memory for received data.\n" );
- } else {
- head_buffer = priv->rxBuffer + ( priv->rxHead * TLAN_MAX_FRAME_SIZE );
- skb->dev = dev;
- skb_reserve( skb, 2 );
- t = (void *) skb_put( skb, head_list->frameSize );
- // printk( " %hd %p %p\n", head_list->frameSize, skb->data, t );
-
-#if LINUX_KERNEL_VERSION > 0x20100
- priv->stats->rx_bytes += head_list->frameSize;
-#endif
+ * This function prints out all the the internal (DIO)
+ * registers of a TLAN chip.
+ *
+ **************************************************************/
- memcpy( t, head_buffer, head_list->frameSize );
- skb->protocol = eth_type_trans( skb, dev );
- netif_rx( skb );
- }
- }
- head_list->forward = 0;
- head_list->frameSize = TLAN_MAX_FRAME_SIZE;
- head_list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
- tail_list->forward = virt_to_bus( head_list );
- priv->rxHead++;
- if ( priv->rxHead >= TLAN_NUM_RX_LISTS )
- priv->rxHead = 0;
- priv->rxTail++;
- if ( priv->rxTail >= TLAN_NUM_RX_LISTS )
- priv->rxTail = 0;
- if ( eoc ) {
- TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
- head_list = priv->rxList + priv->rxHead;
- outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
- ack |= TLAN_HC_GO | TLAN_HC_RT;
- priv->rxEocCount++;
- }
- TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
- if ( priv->phyFlags & TLAN_PHY_ACTIVITY ) {
- if ( priv->timerSetAt == 0 ) {
- // printk("RxEOF Starting timer...\n");
- priv->timerSetAt = jiffies;
- priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
- priv->timerType = TLAN_TIMER_ACT;
- add_timer( &priv->timer );
- } else if ( priv->timerType == TLAN_TIMER_ACT ) {
- // printk("RxEOF tarting continuing timer...\n");
- priv->timerSetAt = jiffies;
- }
- }
- dev->last_rx = jiffies;
+void TLan_PrintDio( u16 io_base )
+{
+ u32 data0, data1;
+ int i;
- return ack;
+ printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n", io_bas
+e );
+ printk( "TLAN: Off. +0 +4\n" );
+ for ( i = 0; i < 0x4C; i+= 8 ) {
+ data0 = TLan_DioRead32( io_base, i );
+ data1 = TLan_DioRead32( io_base, i + 0x4 );
+ printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 );
+ }
- } /* TLan_HandleRxEOF */
+} /* TLan_PrintDio */
- /*************************************************************************
- * TLan_HandleDummy
- *
- * Returns: 1
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
+ /***************************************************************
+ * TLan_PrintList
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * list A pointer to the TLanList structure to
+ * be printed.
+ * type A string to designate type of list,
+ * "Rx" or "Tx".
+ * num The index of the list.
*
- * This function handles the Dummy interrupt, which is raised whenever
- * a test interrupt is generated by setting the Req_Int bit of HOST_CMD
- * to 1.
+ * This function prints out the contents of the list
+ * pointed to by the list parameter.
*
- ************************************************************************/
+ **************************************************************/
- u32 TLan_HandleDummy( struct device *dev, u16 host_int )
- {
- host_int = 0;
- printk( "TLAN: Dummy interrupt on %s.\n", dev->name );
- return 1;
+void TLan_PrintList( TLanList *list, char *type, int num)
+{
+ int i;
- } /* TLan_HandleDummy */
+ printk( "TLAN: %s List %d at 0x%08x\n", type, num, (u32) list );
+ printk( "TLAN: Forward = 0x%08x\n", list->forward );
+ printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
+ printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
+ // for ( i = 0; i < 10; i++ ) {
+ for ( i = 0; i < 2; i++ ) {
+ printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n", i, list->buffe
+r[i].count, list->buffer[i].address );
+ }
+} /* TLan_PrintList */
- /*************************************************************************
- * TLan_HandleTxEOC
- *
- * Returns: 1
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This driver is structured to determine EOC occurances by reading the
- * CSTAT member of the list structure. Tx EOC interrupts are disabled
- * via the DIO INTDIS register. However, TLAN chips before revision 3.0
- * didn't have this functionality, so process EOC events if this is the
- * case.
- *
- ************************************************************************/
- u32 TLan_HandleTxEOC( struct device *dev, u16 host_int )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- TLanList *head_list;
- u32 ack = 1;
-
- host_int = 0;
- if ( priv->tlanRev < 0x30 ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n", priv->txHead, priv->txTail );
- head_list = priv->txList + priv->txHead;
- if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
- outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
- ack |= TLAN_HC_GO;
- } else {
- priv->txInProgress = 0;
- }
- }
- return ack;
-
- } /* TLan_HandleTxEOC */
+ /***************************************************************
+ * TLan_ReadAndClearStats
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * to which to read stats.
+ * record Flag indicating whether to add
+ *
+ * This functions reads all the internal status registers
+ * of the TLAN chip, which clears them as a side effect.
+ * It then either adds the values to the device's status
+ * struct, or discards them, depending on whether record
+ * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
+ *
+ **************************************************************/
+
+void TLan_ReadAndClearStats( struct device *dev, int record )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ u32 tx_good, tx_under;
+ u32 rx_good, rx_over;
+ u32 def_tx, crc, code;
+ u32 multi_col, single_col;
+ u32 excess_col, late_col, loss;
+
+ outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ tx_good = inb( dev->base_addr + TLAN_DIO_DATA );
+ tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
+ tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+
+ outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ rx_good = inb( dev->base_addr + TLAN_DIO_DATA );
+ rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
+ rx_over = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+
+ outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
+ def_tx = inb( dev->base_addr + TLAN_DIO_DATA );
+ def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ crc = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+ code = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
+
+ outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ multi_col = inb( dev->base_addr + TLAN_DIO_DATA );
+ multi_col += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
+ single_col = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+ single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
+
+ outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
+ excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
+ late_col = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
+ loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
+
+ if ( record ) {
+ priv->stats.rx_packets += rx_good;
+ priv->stats.rx_errors += rx_over + crc + code;
+ priv->stats.tx_packets += tx_good;
+ priv->stats.tx_errors += tx_under + loss;
+ priv->stats.collisions += multi_col + single_col + excess_col + late_col;
+
+ priv->stats.rx_over_errors += rx_over;
+ priv->stats.rx_crc_errors += crc;
+ priv->stats.rx_frame_errors += code;
+
+ priv->stats.tx_aborted_errors += tx_under;
+ priv->stats.tx_carrier_errors += loss;
+ }
+
+} /* TLan_ReadAndClearStats */
- /*************************************************************************
- * TLan_HandleStatusCheck
- *
- * Returns: 0 if Adapter check, 1 if Network Status check.
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This function handles Adapter Check/Network Status interrupts
- * generated by the adapter. It checks the vector in the HOST_INT
- * register to determine if it is an Adapter Check interrupt. If so,
- * it resets the adapter. Otherwise it clears the status registers
- * and services the PHY.
+ /***************************************************************
+ * TLan_Reset
*
- ************************************************************************/
+ * Returns:
+ * 0
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * to be reset.
+ *
+ * This function resets the adapter and it's physical
+ * device. See Chap. 3, pp. 9-10 of the "ThunderLAN
+ * Programmer's Guide" for details. The routine tries to
+ * implement what is detailed there, though adjustments
+ * have been made.
+ *
+ **************************************************************/
+
+int TLan_Reset( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ int i;
+ u32 addr;
+ u32 data;
+ u8 data8;
+
+// 1. Assert reset bit.
+
+ data = inl(dev->base_addr + TLAN_HOST_CMD);
+ data |= TLAN_HC_AD_RST;
+ outl(data, dev->base_addr + TLAN_HOST_CMD);
+
+// 2. Turn off interrupts. ( Probably isn't necessary )
+
+ data = inl(dev->base_addr + TLAN_HOST_CMD);
+ data |= TLAN_HC_INT_OFF;
+ outl(data, dev->base_addr + TLAN_HOST_CMD);
+
+// 3. Clear AREGs and HASHs.
+
+ for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
+ TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
+ }
+
+// 4. Setup NetConfig register.
+
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
+ TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
+
+// 5. Load Ld_Tmr and Ld_Thr in HOST_CMD.
+
+ outl( TLAN_HC_LD_TMR | 0x0, dev->base_addr + TLAN_HOST_CMD );
+ outl( TLAN_HC_LD_THR | 0x1, dev->base_addr + TLAN_HOST_CMD );
+
+// 6. Unreset the MII by setting NMRST (in NetSio) to 1.
+
+ outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
+ addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
+ TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
+
+// 7. Setup the remaining registers.
+
+ if ( priv->tlanRev >= 0x30 ) {
+ data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
+ TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
+ }
+ TLan_PhySelect( dev );
+ data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
+ if ( priv->phyFlags & TLAN_PHY_BIT_RATE ) {
+ data |= TLAN_NET_CFG_BIT;
+ if ( aui == 1 ) {
+ TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
+ } else {
+ TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
+ }
+ }
+ if ( priv->phyFlags & TLAN_PHY_INTERNAL ) {
+ data |= TLAN_NET_CFG_PHY_EN;
+ }
+ TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
+ (*priv->phyCheck)( dev );
+ data8 = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data8 );
+ data8 = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
+ if ( priv->phyFlags & TLAN_PHY_INTS ) {
+ data8 |= TLAN_NET_MASK_MASK7;
+ }
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data8 );
+ TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, TLAN_MAX_FRAME_SIZE );
+
+ if ( priv->phyFlags & TLAN_PHY_UNMANAGED ) {
+ priv->phyOnline = 1;
+ }
- u32 TLan_HandleStatusCheck( struct device *dev, u16 host_int )
- {
- u32 ack;
- u32 error;
- u8 net_sts;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
-
- ack = 1;
- if ( host_int & TLAN_HI_IV_MASK ) {
- error = inl( dev->base_addr + TLAN_CH_PARM );
- printk( "TLAN: Adaptor Check on device %s err = 0x%x\n", dev->name, error );
- TLan_ReadAndClearStats( dev, TLAN_RECORD );
- outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
- TLan_ResetLists( dev );
- TLan_Reset( dev );
- dev->tbusy = 0;
- TLan_SetMac( dev, 0, dev->dev_addr );
- if ( priv->timerType == 0 ) {
- if ( priv->phyFlags & TLAN_PHY_AUTONEG ) {
- priv->timer.expires = jiffies + TLAN_TIMER_LINK_DELAY;
- priv->timerSetAt = jiffies;
- priv->timerType = TLAN_TIMER_LINK;
- add_timer( &priv->timer );
- } else {
- //printk( " RX GO---->\n" );
- outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
- outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
- }
- }
- ack = 0;
- } else {
- net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
- if ( net_sts )
- TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
- if ( net_sts & TLAN_NET_STS_MIRQ ) {
- (*priv->phyService)( dev );
- if (debug) {
- TLan_PhyPrint( dev );
- }
- }
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Status Check! %s Net_Sts=%x\n", dev->name, (unsigned) net_sts );
- }
+ return 0;
- return ack;
+} /* TLan_Reset */
- } /* TLan_HandleStatusCheck */
-
- /*************************************************************************
- * TLan_HandleRxEOC
+ /***************************************************************
+ * TLan_SetMac
*
- * Returns: 1
- * Parms: dev Device assigned the IRQ that was raised.
- * host_int The contents of the HOST_INT port.
- *
- * This driver is structured to determine EOC occurances by reading the
- * CSTAT member of the list structure. Rx EOC interrupts are disabled
- * via the DIO INTDIS register. However, TLAN chips before revision 3.0
- * didn't have this CSTAT member or a INTDIS register, so if this chip
- * is pre-3.0, process EOC interrupts normally.
- *
- ************************************************************************/
-
- u32 TLan_HandleRxEOC( struct device *dev, u16 host_int )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- TLanList *head_list;
- u32 ack = 1;
-
- host_int = 0;
- if ( priv->tlanRev < 0x30 ) {
- TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n", priv->rxHead, priv->rxTail );
- head_list = priv->rxList + priv->rxHead;
- outl( virt_to_bus( head_list ), dev->base_addr + TLAN_CH_PARM );
- ack |= TLAN_HC_GO | TLAN_HC_RT;
- priv->rxEocCount++;
- }
- return ack;
-
- } /* TLan_HandleRxEOC */
-
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev Pointer to device structure of adapter
+ * on which to change the AREG.
+ * areg The AREG to set the address in (0 - 3).
+ * mac A pointer to an array of chars. Each
+ * element stores one byte of the address.
+ * IE, it isn't in ascii.
+ *
+ * This function transfers a MAC address to one of the
+ * TLAN AREGs (address registers). The TLAN chip locks
+ * the register on writing to offset 0 and unlocks the
+ * register after writing to offset 5. If NULL is passed
+ * in mac, then the AREG is filled with 0's.
+ *
+ **************************************************************/
+
+void TLan_SetMac( struct device *dev, int areg, char *mac )
+{
+ int i;
+
+ areg *= 6;
+ if ( mac != NULL ) {
+ for ( i = 0; i < 6; i++ )
+ TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, mac[i] );
+ } else {
+ for ( i = 0; i < 6; i++ )
+ TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, 0 );
+ }
- static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
- TLan_HandleInvalid,
- TLan_HandleTxEOF,
- TLan_HandleStatOverflow,
- TLan_HandleRxEOF,
- TLan_HandleDummy,
- TLan_HandleTxEOC,
- TLan_HandleStatusCheck,
- TLan_HandleRxEOC
- };
+} /* TLan_SetMac */
@@ -1606,774 +1813,923 @@
/*****************************************************************************
******************************************************************************
- ThunderLAN Driver Timer Function
+ ThunderLAN Driver PHY Layer Routines
+ The TLAN chip can drive any number of PHYs (physical devices). Rather
+ than having lots of 'if' or '#ifdef' statements, I have created a
+ second driver layer for the PHYs. Each PHY can be identified from its
+ id in registers 2 and 3, and can be given a Check and Service routine
+ that will be called when the adapter is reset and when the adapter
+ receives a Network Status interrupt, respectively.
+
******************************************************************************
*****************************************************************************/
- static void TLan_Timer( unsigned long );
-
+static TLanPhyIdEntry TLanPhyIdTable[] = {
+ { 0x4000,
+ 0x5014,
+ &TLan_PhyInternalCheck,
+ &TLan_PhyInternalService,
+ TLAN_PHY_ACTIVITY | TLAN_PHY_INTS | TLAN_PHY_INTERNAL },
+ { 0x4000,
+ 0x5015,
+ &TLan_PhyInternalCheck,
+ &TLan_PhyInternalService,
+ TLAN_PHY_ACTIVITY | TLAN_PHY_INTS | TLAN_PHY_INTERNAL },
+ { 0x4000,
+ 0x5016,
+ &TLan_PhyInternalCheck,
+ &TLan_PhyInternalService,
+ TLAN_PHY_ACTIVITY | TLAN_PHY_INTS | TLAN_PHY_INTERNAL },
+ { 0x2000,
+ 0x5C00,
+ &TLan_PhyDp83840aCheck,
+ &TLan_PhyNop,
+ TLAN_PHY_ACTIVITY | TLAN_PHY_AUTONEG },
+ { 0x2000,
+ 0x5C01,
+ &TLan_PhyDp83840aCheck,
+ &TLan_PhyNop,
+ TLAN_PHY_ACTIVITY | TLAN_PHY_AUTONEG },
+ { 0x7810,
+ 0x0000,
+ &TLan_PhyDp83840aCheck,
+ &TLan_PhyNop,
+ TLAN_PHY_AUTONEG },
+ { 0x0000,
+ 0x0000,
+ NULL,
+ NULL,
+ 0
+ }
+ };
- /*************************************************************************
- * TLan_Timer
+ /*********************************************************************
+ * TLan_PhyPrint
*
- * Returns: Nothing
- * Parms: data A value given to add timer when add_timer was
- * called.
- *
- * This function handles timed functionality for the TLAN driver. The
- * two current timer uses are for delaying for autonegotionation and
- * driving the ACT LED.
- * - Autonegotiation requires being allowed about 2 1/2 seconds before
- * attempting to transmit a packet. It would be a very bad thing
- * to hang the kernel this long, so the driver doesn't allow
- * transmission 'til after this time, for certain PHYs. It would
- * be much nicer if all PHYs were interrupt-capable like the
- * internal PHY.
- * - The ACT LED, which shows adapter activity, is driven by the driver,
- * and so must be left on for a short period to power up the LED so
- * it can be seen. This delay can be changed by changing the
- * TLAN_TIMER_ACT_DELAY in tlan.h, if desired. 10 jiffies produces a
- * slightly sluggish response.
- *
- ************************************************************************/
-
- void TLan_Timer( unsigned long data )
- {
- struct device *dev = (struct device *) data;
- u16 gen_sts;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
-
- // printk( "TLAN: %s Entered Timer, type = %d\n", dev->name, priv->timerType );
-
- switch ( priv->timerType ) {
- case TLAN_TIMER_LINK:
- TLan_MiiReadReg( dev->base_addr, priv->phyAddr, MII_GEN_STS, &gen_sts );
- if ( gen_sts & MII_GS_LINK ) {
- priv->phyOnline = 1;
- outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
- outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
- priv->timerSetAt = 0;
- priv->timerType = 0;
- } else {
- priv->timer.expires = jiffies + ( TLAN_TIMER_LINK_DELAY * 2 );
- add_timer( &priv->timer );
- }
- break;
- case TLAN_TIMER_ACT:
- if ( jiffies - priv->timerSetAt >= TLAN_TIMER_ACT_DELAY ) {
- TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
- priv->timerSetAt = 0;
- priv->timerType = 0;
- } else {
- priv->timer.expires = priv->timerSetAt + TLAN_TIMER_ACT_DELAY;
- add_timer( &priv->timer );
- }
- break;
- default:
- break;
- }
-
- } /* TLan_Timer */
-
-
-
-
-/*****************************************************************************
-******************************************************************************
-
- ThunderLAN Driver Primary Functions
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to the device structure of the adapter
+ * which the desired PHY is located.
+ *
+ * This function prints the registers a PHY.
+ *
+ ********************************************************************/
- These functions are more or less common to all Linux network drivers.
+void TLan_PhyPrint( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ u16 i, data0, data1, data2, data3, phy;
+ u32 io;
+
+ phy = priv->phyAddr;
+ io = dev->base_addr;
+
+ if ( ( phy > 0 ) && ( phy <= TLAN_PHY_MAX_ADDR ) ) {
+ printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
+ printk( "TLAN: Off. +0 +1 +2 +3 \n" );
+ for ( i = 0; i < 0x20; i+= 4 ) {
+ printk( "TLAN: 0x%02x", i );
+ TLan_MiiReadReg( io, phy, i, &data0 );
+ printk( " 0x%04hx", data0 );
+ TLan_MiiReadReg( io, phy, i + 1, &data1 );
+ printk( " 0x%04hx", data1 );
+ TLan_MiiReadReg( io, phy, i + 2, &data2 );
+ printk( " 0x%04hx", data2 );
+ TLan_MiiReadReg( io, phy, i + 3, &data3 );
+ printk( " 0x%04hx\n", data3 );
+ }
+ } else {
+ printk( "TLAN: Device %s, PHY 0x%02x (Unmanaged/Unknown).\n",
+ dev->name,
+ phy
+ );
+ }
+
+} /* TLan_PhyPrint */
-******************************************************************************
-*****************************************************************************/
- static int TLan_PciProbe( u8 *, u8 *, u8 *, u8 *, u32 *, u32 * );
- static int TLan_Init( struct device * );
- static int TLan_Open(struct device *dev);
- static int TLan_StartTx(struct sk_buff *, struct device *);
- static void TLan_HandleInterrupt(int, void *, struct pt_regs *);
- static int TLan_Close(struct device *);
- static struct net_device_stats *TLan_GetStats( struct device * );
- static void TLan_SetMulticastList( struct device * );
-#ifdef MODULE
+ /*********************************************************************
+ * TLan_PhySelect
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to the device structure of the adapter
+ * for which the PHY needs determined.
+ *
+ * This function decides which PHY amoung those attached to the
+ * TLAN chip is to be used. The TLAN chip can be attached to
+ * multiple PHYs, and the driver needs to decide which one to
+ * talk to. Currently this routine picks the PHY with the lowest
+ * address as the internal PHY address is 0x1F, the highest
+ * possible. This strategy assumes that there can be only one
+ * other PHY, and, if it exists, it is the one to be used. If
+ * token ring PHYs are ever supported, this routine will become
+ * a little more interesting...
+ *
+ ********************************************************************/
+
+void TLan_PhySelect( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ int phy;
+ int entry;
+ u16 id_hi[TLAN_PHY_MAX_ADDR + 1];
+ u16 id_lo[TLAN_PHY_MAX_ADDR + 1];
+ u16 hi;
+ u16 lo;
+ u16 vendor;
+ u16 device;
- /*************************************************************************
- * init_module
- *
- * Returns: 0 if module installed ok, non-zero if not.
- * Parms: None
- *
- * This function begins the setup of the driver creating a pad buffer,
- * finding all TLAN devices (matching TLanDeviceList entries), and
- * creating and initializing a device structure for each adapter.
- *
- ************************************************************************/
-
- extern int init_module(void)
- {
- int failed, found;
- size_t dev_size;
- struct device *dev;
- TLanPrivateInfo *priv;
- u8 bus, dfn, irq, rev;
- u32 io_base, dl_ix;
-
- printk("TLAN driver, v%d.%d, (C) 1997 Caldera, Inc.\n",
- TLanVersionMajor,
- TLanVersionMinor
- );
+ priv->phyCheck = &TLan_PhyNop; // Make sure these aren't ever NULL
+ priv->phyService = &TLan_PhyNop;
+
+ vendor = TLanDeviceList[priv->pciEntry].vendorId;
+ device = TLanDeviceList[priv->pciEntry].deviceId;
- TLanPadBuffer = (u8 *) kmalloc( TLAN_MIN_FRAME_SIZE, GFP_KERNEL | GFP_DMA );
- if ( TLanPadBuffer == NULL ) {
- printk( "TLAN: Could not allocate memory for pad buffer.\n" );
- return -ENOMEM;
+ // This is a bit uglier than I'd like, but the 0xF130 device must
+ // NOT be assigned a valid PHY as it uses an unmanaged, bit-rate
+ // PHY. It is simplest just to use another goto, rather than
+ // nesting the two for loops in the if statement.
+
+ if ( ( vendor == PCI_VENDOR_ID_COMPAQ ) &&
+ ( device == PCI_DEVICE_ID_NETFLEX_3P ) ) {
+ entry = 0;
+ phy = 0;
+ goto FINISH;
+ }
+
+ for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
+ hi = lo = 0;
+ TLan_MiiReadReg( dev->base_addr, phy, MII_GEN_ID_HI, &hi );
+ TLan_MiiReadReg( dev->base_addr, phy, MII_GEN_ID_LO, &lo );
+ id_hi[phy] = hi;
+ id_lo[phy] = lo;
+ TLAN_DBG( TLAN_DEBUG_GNRL,
+ "TLAN: Phy %2x, hi = %hx, lo = %hx\n",
+ phy,
+ hi,
+ lo
+ );
+ }
+
+ for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
+ if ( ( aui == 1 ) && ( phy != TLAN_PHY_MAX_ADDR ) ) {
+ if ( id_hi[phy] != 0xFFFF ) {
+ TLan_MiiSync(dev->base_addr);
+ TLan_MiiWriteReg(dev->base_addr,
+ phy,
+ MII_GEN_CTL,
+ MII_GC_PDOWN |
+ MII_GC_LOOPBK |
+ MII_GC_ISOLATE );
+
+ }
+ continue;
+ }
+ for ( entry = 0; TLanPhyIdTable[entry].check; entry++) {
+ if ( ( id_hi[phy] == TLanPhyIdTable[entry].idHi ) &&
+ ( id_lo[phy] == TLanPhyIdTable[entry].idLo ) ) {
+ TLAN_DBG( TLAN_DEBUG_GNRL,
+ "TLAN: Selected Phy %hx\n",
+ phy
+ );
+ goto FINISH;
}
- memset( TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE );
+ }
+ }
- dev_size = sizeof(struct device) + sizeof(TLanPrivateInfo);
- while ( ( found = TLan_PciProbe( &bus, &dfn, &irq, &rev, &io_base, &dl_ix ) ) ) {
- dev = (struct device *) kmalloc( dev_size, GFP_KERNEL );
- if ( dev == NULL ) {
- printk( "TLAN: Could not allocate memory for device.\n" );
- continue;
- }
- memset( dev, 0, dev_size );
+ entry = 0;
+ phy = 0;
- dev->priv = priv = ( (void *) dev ) + sizeof(struct device);
- dev->name = priv->devName;
- strcpy( priv->devName, " " );
- dev->base_addr = io_base;
- dev->irq = irq;
- dev->init = TLan_Init;
-
- priv->pciBus = bus;
- priv->pciDeviceFn = dfn;
- priv->pciRevision = rev;
- priv->pciEntry = dl_ix;
-
- ether_setup( dev );
-
- failed = register_netdev( dev );
-
- if ( failed ) {
- printk( "TLAN: Could not register network device. Freeing struct.\n" );
- kfree( dev );
- } else {
- priv->nextDevice = TLanDevices;
- TLanDevices = dev;
- TLanDevicesInstalled++;
- printk("TLAN: %s irq=%2d io=%04x, %s\n", dev->name, (int) irq, io_base, TLanDeviceList[dl_ix].deviceName );
- }
- }
+FINISH:
+
+ if ( ( entry == 0 ) && ( phy == 0 ) ) {
+ priv->phyAddr = phy;
+ priv->phyEntry = entry;
+ priv->phyCheck = TLan_PhyNop;
+ priv->phyService = TLan_PhyNop;
+ priv->phyFlags = TLAN_PHY_BIT_RATE |
+ TLAN_PHY_UNMANAGED |
+ TLAN_PHY_ACTIVITY;
+ } else {
+ priv->phyAddr = phy;
+ priv->phyEntry = entry;
+ priv->phyCheck = TLanPhyIdTable[entry].check;
+ priv->phyService = TLanPhyIdTable[entry].service;
+ priv->phyFlags = TLanPhyIdTable[entry].flags;
+ }
+
+} /* TLan_PhySelect */
+
+
+
+
+ /***************************************************************
+ * TLan_PhyNop
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to a device structure.
+ *
+ * This function does nothing and is meant as a stand-in
+ * for when a Check or Service function would be
+ * meaningless.
+ *
+ **************************************************************/
+
+int TLan_PhyNop( struct device *dev )
+{
+ dev = NULL;
+ return 0;
+
+} /* TLan_PhyNop */
+
+
+
+
+ /***************************************************************
+ * TLan_PhyInternalCheck
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to a device structure of the
+ * adapter holding the PHY to be checked.
+ *
+ * This function resets the internal PHY on a TLAN chip.
+ * See Chap. 7, "Physical Interface (PHY)" of "ThunderLAN
+ * Programmer's Guide"
+ *
+ **************************************************************/
+
+int TLan_PhyInternalCheck( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ u16 gen_ctl;
+ u32 io;
+ u16 phy;
+ u16 value;
+ u8 sio;
+
+ io = dev->base_addr;
+ phy = priv->phyAddr;
+
+ TLan_MiiReadReg( io, phy, MII_GEN_CTL, &gen_ctl );
+ if ( gen_ctl & MII_GC_PDOWN ) {
+ TLan_MiiSync( io );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_
+ISOLATE );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK );
+ udelay(50000);
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_RESET | MII_GC_LOOPBK );
+ TLan_MiiSync( io );
+ }
+
+ TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
+ while ( value & MII_GC_RESET )
+ TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
+
+ // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK | MII_GC_DUPLEX );
+ // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_DUPLEX );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0 );
+
+ udelay(500000);
+
+ TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value );
+ if ( aui )
+ value |= TLAN_TC_AUISEL;
+ else
+ value &= ~TLAN_TC_AUISEL;
+ TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value );
+
+ // Read Possible Latched Link Status
+ TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
+ // Read Real Link Status
+ TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
+ if ( ( value & MII_GS_LINK ) || aui ) {
+ priv->phyOnline = 1;
+ TLan_DioWrite8( io, TLAN_LED_REG, TLAN_LED_LINK );
+ } else {
+ priv->phyOnline = 0;
+ TLan_DioWrite8( io, TLAN_LED_REG, 0 );
+ }
+
+ // Enable Interrupts
+ TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value );
+ value |= TLAN_TC_INTEN;
+ TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value );
+
+ sio = TLan_DioRead8( io, TLAN_NET_SIO );
+ sio |= TLAN_NET_SIO_MINTEN;
+ TLan_DioWrite8( io, TLAN_NET_SIO, sio );
- // printk( "TLAN: Found %d device(s).\n", TLanDevicesInstalled );
-
- return ( ( TLanDevicesInstalled >= 0 ) ? 0 : -ENODEV );
+ return 0;
- } /* init_module */
+} /* TLanPhyInternalCheck */
- /*************************************************************************
- * cleanup_module
- *
- * Returns: Nothing
- * Parms: None
- *
- * Goes through the TLanDevices list and frees the device structs and
- * memory associated with each device (lists and buffers). It also
- * ureserves the IO port regions associated with this device.
- *
- ************************************************************************/
-
- extern void cleanup_module(void)
- {
- struct device *dev;
- TLanPrivateInfo *priv;
-
- while (TLanDevicesInstalled) {
- dev = TLanDevices;
- priv = (TLanPrivateInfo *) dev->priv;
- if ( priv->dmaStorage )
- kfree( priv->dmaStorage );
- release_region( dev->base_addr, 0x10 );
- unregister_netdev( dev );
- TLanDevices = priv->nextDevice;
- kfree( dev );
- TLanDevicesInstalled--;
- }
- kfree( TLanPadBuffer );
-
- } /* cleanup_module */
+ /***************************************************************
+ * TLan_PhyInternalService
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to a device structure of the
+ * adapter holding the PHY to be serviced.
+ *
+ * This function services an interrupt generated by the
+ * internal PHY. It can turn on/off the link LED. See
+ * Chap. 7, "Physical Interface (PHY)" of "ThunderLAN
+ * Programmer's Guide".
+ *
+ **************************************************************/
+
+int TLan_PhyInternalService( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ u16 tlphy_sts;
+ u16 gen_sts;
+ u16 an_exp;
+ u32 io;
+ u16 phy;
+
+ io = dev->base_addr;
+ phy = priv->phyAddr;
+
+ TLan_MiiReadReg( io, phy, TLAN_TLPHY_STS, &tlphy_sts );
+ TLan_MiiReadReg( io, phy, MII_GEN_STS, &gen_sts );
+ TLan_MiiReadReg( io, phy, MII_AN_EXP, &an_exp );
+ if ( ( gen_sts & MII_GS_LINK ) || aui ) {
+ priv->phyOnline = 1;
+ TLan_DioWrite8( io, TLAN_LED_REG, TLAN_LED_LINK );
+ } else {
+ priv->phyOnline = 0;
+ TLan_DioWrite8( io, TLAN_LED_REG, 0 );
+ }
+
+ if ( ( tlphy_sts & TLAN_TS_POLOK ) == 0) {
+ u16 value;
+ TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value);
+ value |= TLAN_TC_SWAPOL;
+ TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value);
+ }
+
+ return 0;
+
+} /* TLan_PhyInternalService */
+
+
+
+
+ /***************************************************************
+ * TLan_PhyDp83840aCheck
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * dev A pointer to a device structure of the
+ * adapter holding the PHY to be reset.
+ *
+ * This function resets a National Semiconductor DP83840A
+ * 10/100 Mb/s PHY device. See National Semiconductor's
+ * data sheet for more info. This PHY is used on Compaq
+ * Netelligent 10/100 cards.
+ *
+ **************************************************************/
+
+static int TLan_PhyDp83840aCheck( struct device *dev )
+{
+ TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
+ u16 gen_ctl;
+ int i;
+ u32 io;
+ u16 phy;
+ u16 value;
+ u8 sio;
+
+ io = dev->base_addr;
+ phy = priv->phyAddr;
+
+ TLan_MiiReadReg( io, phy, MII_GEN_CTL, &gen_ctl );
+ if ( gen_ctl & MII_GC_PDOWN ) {
+ TLan_MiiSync( io );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_
+ISOLATE );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK );
+ for ( i = 0; i < 500000; i++ )
+ SLOW_DOWN_IO;
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_RESET | MII_GC_LOOPBK );
+ TLan_MiiSync( io );
+ }
+
+ TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
+ while ( value & MII_GC_RESET )
+ TLan_MiiReadReg( io, phy, MII_GEN_CTL, &value );
+
+ // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_LOOPBK | MII_GC_DUPLEX );
+ // TLan_MiiWriteReg( io, phy, MII_GEN_CTL, MII_GC_DUPLEX );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0 );
+ TLan_MiiReadReg( io, phy, MII_AN_ADV, &value );
+ value &= ~0x0140;
+ TLan_MiiWriteReg( io, phy, MII_AN_ADV, value );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0x1000 );
+ TLan_MiiWriteReg( io, phy, MII_GEN_CTL, 0x1200 );
+ for ( i = 0; i < 50000; i++ )
+ SLOW_DOWN_IO;
-#else /* MODULE */
+/*
+ // Read Possible Latched Link Status
+ TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
+ // Read Real Link Status
+ TLan_MiiReadReg( io, phy, MII_GEN_STS, &value );
+ if ( value & MII_GS_LINK ) {
+ priv->phyOnline = 1;
+ TLan_DioWrite8( io, TLAN_LED_REG, TLAN_LED_LINK );
+ } else {
+ priv->phyOnline = 0;
+ TLan_DioWrite8( io, TLAN_LED_REG, 0 );
+ }
+
+ // Enable Interrupts
+ TLan_MiiReadReg( io, phy, TLAN_TLPHY_CTL, &value );
+ value |= TLAN_TC_INTEN;
+ TLan_MiiWriteReg( io, phy, TLAN_TLPHY_CTL, value );
+*/
+ sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
+ sio &= ~TLAN_NET_SIO_MINTEN;
+ TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
+// priv->phyOnline = 1;
+
+ return 0;
+} /* TLan_PhyDp83840aCheck */
- /*************************************************************************
- * tlan_probe
- *
- * Returns: 0 on success, error code on error
- * Parms: dev device struct to use if adapter is found.
- *
- * The name is lower case to fit in with all the rest of the
- * netcard_probe names. This function looks for a/another TLan based
- * adapter, setting it up with the provided device struct if one is
- * found.
- *
- ************************************************************************/
-
- extern int tlan_probe( struct device *dev )
- {
- static int pad_allocated = 0;
- int found;
- TLanPrivateInfo *priv;
- u8 bus, dfn, irq, rev;
- u32 io_base, dl_ix;
-
- found = TLan_PciProbe( &bus, &dfn, &irq, &rev, &io_base, &dl_ix );
- if ( found ) {
- dev->priv = kmalloc( sizeof(TLanPrivateInfo), GFP_KERNEL );
- if ( dev->priv == NULL ) {
- printk( "TLAN: Could not allocate memory for device.\n" );
- }
- memset( dev->priv, 0, sizeof(TLanPrivateInfo) );
- priv = (TLanPrivateInfo *) dev->priv;
- dev->name = priv->devName;
- strcpy( priv->devName, " " );
+/*****************************************************************************
+******************************************************************************
- dev = init_etherdev( dev, sizeof(TLanPrivateInfo) );
+ ThunderLAN Driver MII Routines
- dev->base_addr = io_base;
- dev->irq = irq;
-
- priv->pciBus = bus;
- priv->pciDeviceFn = dfn;
- priv->pciRevision = rev;
- priv->pciEntry = dl_ix;
-
- if ( ! pad_allocated ) {
- TLanPadBuffer = (u8 *) kmalloc( TLAN_MIN_FRAME_SIZE, GFP_KERNEL | GFP_DMA );
- if ( TLanPadBuffer == NULL ) {
- printk( "TLAN: Could not allocate memory for pad buffer.\n" );
- } else {
- pad_allocated = 1;
- memset( TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE );
- }
- }
- printk("TLAN %d.%d: %s irq=%2d io=%04x, %s\n", TLanVersionMajor,
- TLanVersionMinor,
- dev->name,
- (int) irq,
- io_base,
- TLanDeviceList[dl_ix].deviceName );
- TLan_Init( dev );
- }
-
- return ( ( found ) ? 0 : -ENODEV );
+ These routines are based on the information in Chap. 2 of the
+ "ThunderLAN Programmer's Guide", pp. 15-24.
- } /* tlan_probe */
+******************************************************************************
+*****************************************************************************/
-#endif /* MODULE */
+ /***************************************************************
+ * TLan_MiiReadReg
+ *
+ * Returns:
+ * 0 if ack received ok
+ * 1 otherwise.
+ *
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ * dev The address of the PHY to be queried.
+ * reg The register whose contents are to be
+ * retreived.
+ * val A pointer to a variable to store the
+ * retrieved value.
+ *
+ * This function uses the TLAN's MII bus to retreive the contents
+ * of a given register on a PHY. It sends the appropriate info
+ * and then reads the 16-bit register value from the MII bus via
+ * the TLAN SIO register.
+ *
+ **************************************************************/
+
+int TLan_MiiReadReg(u16 base_port, u16 dev, u16 reg, u16 *val)
+{
+ u8 nack;
+ u16 sio, tmp;
+ u32 i;
+ int err;
+ int minten;
+
+ err = FALSE;
+ outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ cli();
+
+ TLan_MiiSync(base_port);
+
+ minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
+ if ( minten )
+ TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
+
+ TLan_MiiSendData( base_port, 0x1, 2 ); /* Start ( 01b ) */
+ TLan_MiiSendData( base_port, 0x2, 2 ); /* Read ( 10b ) */
+ TLan_MiiSendData( base_port, dev, 5 ); /* Device # */
+ TLan_MiiSendData( base_port, reg, 5 ); /* Register # */
+
+
+ TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio); /* Change direction */
+
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Clock Idle bit */
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Wait 300ns */
+
+ nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio); /* Check for ACK */
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio); /* Finish ACK */
+ if (nack) { /* No ACK, so fake it */
+ for (i = 0; i < 16; i++) {
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ }
+ tmp = 0xffff;
+ err = TRUE;
+ } else { /* ACK, so read data */
+ for (tmp = 0, i = 0x8000; i; i >>= 1) {
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
+ if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
+ tmp |= i;
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ }
+ }
+ TLan_ClearBit(TLAN_NET_SIO_MCLK, sio); /* Idle cycle */
+ TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
+ if ( minten )
+ TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
- /*************************************************************************
- * TLan_PciProbe
- *
- * Returns: 1 if another TLAN card was found, 0 if not.
- * Parms: pci_bus The PCI bus the card was found on.
- * pci_dfn The PCI whatever the card was found at.
- * pci_irq The IRQ of the found adapter.
- * pci_rev The revision of the adapter.
- * pci_io_base The first IO port used by the adapter.
- * dl_ix The index in the device list of the adapter.
- *
- * This function searches for an adapter with PCI vendor and device
- * IDs matching those in the TLanDeviceList. The function 'remembers'
- * the last device it found, and so finds a new device (if anymore are
- * to be found) each time the function is called. It then looks up
- * pertinent PCI info and returns it to the caller.
- *
- ************************************************************************/
+ *val = tmp;
- int TLan_PciProbe( u8 *pci_bus, u8 *pci_dfn, u8 *pci_irq, u8 *pci_rev, u32 *pci_io_base, u32 *dl_ix )
- {
- static int dl_index = 0;
- static int pci_index = 0;
+ sti();
- int not_found;
- u8 pci_latency;
- u16 pci_command;
+ return err;
+} /* TLan_MiiReadReg */
- if ( ! pcibios_present() ) {
- printk( "TLAN: PCI Bios not present.\n" );
- return 0;
- }
- for (; TLanDeviceList[dl_index].vendorId != 0; dl_index++) {
- not_found = pcibios_find_device( TLanDeviceList[dl_index].vendorId,
- TLanDeviceList[dl_index].deviceId,
- pci_index,
- pci_bus,
- pci_dfn
- );
- if ( ! not_found ) {
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: found: Vendor Id = 0x%hx, Device Id = 0x%hx\n",
- TLanDeviceList[dl_index].vendorId,
- TLanDeviceList[dl_index].deviceId
- );
-
- pcibios_read_config_byte ( *pci_bus, *pci_dfn, PCI_REVISION_ID, pci_rev);
- pcibios_read_config_byte ( *pci_bus, *pci_dfn, PCI_INTERRUPT_LINE, pci_irq);
- pcibios_read_config_word ( *pci_bus, *pci_dfn, PCI_COMMAND, &pci_command);
- pcibios_read_config_dword( *pci_bus, *pci_dfn, PCI_BASE_ADDRESS_0, pci_io_base);
- pcibios_read_config_byte ( *pci_bus, *pci_dfn, PCI_LATENCY_TIMER, &pci_latency);
-
- if (pci_latency < 0x10) {
- pcibios_write_config_byte( *pci_bus, *pci_dfn, PCI_LATENCY_TIMER, 0xff);
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Setting latency timer to max.\n");
- }
-
- if ((pci_command & PCI_COMMAND_IO) && (*pci_io_base & 0x3)) {
- *pci_io_base &= PCI_BASE_ADDRESS_IO_MASK;
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: IO mapping is available at %x.\n", *pci_io_base);
- } else {
- *pci_io_base = 0;
- printk("TLAN: IO mapping not available, ignoring device.\n");
- }
-
- if (pci_command & PCI_COMMAND_MASTER) {
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Bus mastering is active.\n");
- }
-
- pci_index++;
-
- if ( *pci_io_base ) {
- *dl_ix = dl_index;
- return 1;
- }
- } else {
- pci_index = 0;
- }
- }
- return 0;
+ /***************************************************************
+ * TLan_MiiSendData
+ *
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ * dev The address of the PHY to be queried.
+ * data The value to be placed on the MII bus.
+ * num_bits The number of bits in data that are to
+ * be placed on the MII bus.
+ *
+ * This function sends on sequence of bits on the MII
+ * configuration bus.
+ *
+ **************************************************************/
+
+void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
+{
+ u16 sio;
+ u32 i;
+
+ if ( num_bits == 0 )
+ return;
+
+ outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
+ TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
+
+ for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
+ TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
+ TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+ if ( data & i )
+ TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
+ else
+ TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
+ TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+ TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
+ }
- } /* TLan_PciProbe */
+} /* TLan_MiiSendData */
- /*************************************************************************
- * TLan_Init
+ /***************************************************************
+ * TLan_MiiSync
*
- * Returns: 0 on success, error code otherwise.
- * Parms: dev The structure of the device to be init'ed.
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
*
- * This function completes the initialization of the device structure
- * and driver. It reserves the IO addresses, allocates memory for the
- * lists and bounce buffers, retrieves the MAC address from the eeprom
- * and assignes the device's methods.
- *
- ************************************************************************/
-
- int TLan_Init( struct device *dev )
- {
- int dma_size;
- int err;
- int i;
- TLanPrivateInfo *priv;
-
- priv = (TLanPrivateInfo *) dev->priv;
-
- err = check_region( dev->base_addr, 0x10 );
- if ( err ) {
- printk( "TLAN: %s: Io port region 0x%lx size 0x%x in use.\n", dev->name, dev->base_addr, 0x10 );
- return -EIO;
- }
- request_region( dev->base_addr, 0x10, TLanSignature );
-
- dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS ) * ( sizeof(TLanList) + TLAN_MAX_FRAME_SIZE );
- priv->dmaStorage = kmalloc( dma_size, GFP_KERNEL | GFP_DMA );
- if ( priv->dmaStorage == NULL ) {
- printk( "TLAN: Could not allocate lists and buffers for %s.\n", dev->name );
- return -ENOMEM;
- }
- memset( priv->dmaStorage, 0, dma_size );
- priv->rxList = (TLanList *) ( ( ( (u32) priv->dmaStorage ) + 7 ) & 0xFFFFFFF8 );
- priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
- priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
- priv->txBuffer = priv->rxBuffer + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+ * This functions syncs all PHYs in terms of the MII configuration
+ * bus.
+ *
+ **************************************************************/
- err = 0;
- for ( i = 0; i < 6 ; i++ )
- err |= TLan_EeReadByte( dev->base_addr, (u8) 0x83 + i, (u8 *) &dev->dev_addr[i] );
- if ( err )
- printk( "TLAN: %s: Error reading MAC Address from eeprom: %d\n", dev->name, err );
- dev->addr_len = 6;
+void TLan_MiiSync( u16 base_port )
+{
+ int i;
+ u16 sio;
- dev->open = &TLan_Open;
- dev->hard_start_xmit = &TLan_StartTx;
- dev->stop = &TLan_Close;
- dev->get_stats = &TLan_GetStats;
- dev->set_multicast_list = &TLan_SetMulticastList;
+ outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
- return 0;
+ TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
+ for ( i = 0; i < 32; i++ ) {
+ TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
+ TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
+ }
- } /* TLan_Init */
+} /* TLan_MiiSync */
- /*************************************************************************
- * TLan_Open
+ /***************************************************************
+ * TLan_MiiWriteReg
*
- * Returns: 0 on success, error code otherwise.
- * Parms: dev Structure of device to be opened.
+ * Returns:
+ * Nothing
+ * Parms:
+ * base_port The base IO port of the adapter in
+ * question.
+ * dev The address of the PHY to be written to.
+ * reg The register whose contents are to be
+ * written.
+ * val The value to be written to the register.
*
- * This routine puts the driver and TLAN adapter in a state where it is
- * ready to send and receive packets. It allocates the IRQ, resets and
- * brings the adapter out of reset, and allows interrupts. It also
- * delays the startup for autonegotiation or sends a Rx GO command to
- * the adapter, as appropriate.
- *
- ************************************************************************/
-
- int TLan_Open( struct device *dev )
- {
- int err;
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
-
- priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
- err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev );
- if ( err ) {
- printk( "TLAN: Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
- return -EAGAIN;
- }
+ * This function uses the TLAN's MII bus to write the contents of a
+ * given register on a PHY. It sends the appropriate info and then
+ * writes the 16-bit register value from the MII configuration bus
+ * via the TLAN SIO register.
+ *
+ **************************************************************/
- MOD_INC_USE_COUNT;
+void TLan_MiiWriteReg(u16 base_port, u16 dev, u16 reg, u16 val)
+{
+ u16 sio;
+ int minten;
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-
- /* NOTE: It might not be necessary to read the stats before a
- reset if you don't care what the values are.
- */
- TLan_ResetLists( dev );
- TLan_ReadAndClearStats( dev, TLAN_IGNORE );
- TLan_Reset( dev );
- TLan_Reset( dev );
- TLan_SetMac( dev, 0, dev->dev_addr );
- outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
- if ( debug >= 1 )
- outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
-
- init_timer( &priv->timer );
- priv->timer.data = (unsigned long) dev;
- priv->timer.function = &TLan_Timer;
- if ( priv->phyFlags & TLAN_PHY_AUTONEG ) {
- priv->timer.expires = jiffies + TLAN_TIMER_LINK_DELAY;
- priv->timerSetAt = jiffies;
- priv->timerType = TLAN_TIMER_LINK;
- add_timer( &priv->timer );
- } else {
- outl( virt_to_bus( priv->rxList ), dev->base_addr + TLAN_CH_PARM );
- outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
- }
+ outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
+ sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Device %s opened. Revision = %x\n", dev->name, priv->tlanRev );
+ cli();
- return 0;
+ TLan_MiiSync( base_port );
- } /* TLan_Open */
+ minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
+ if ( minten )
+ TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
+ TLan_MiiSendData( base_port, 0x1, 2 ); /* Start ( 01b ) */
+ TLan_MiiSendData( base_port, 0x1, 2 ); /* Write ( 01b ) */
+ TLan_MiiSendData( base_port, dev, 5 ); /* Device # */
+ TLan_MiiSendData( base_port, reg, 5 ); /* Register # */
+ TLan_MiiSendData( base_port, 0x2, 2 ); /* Send ACK */
+ TLan_MiiSendData( base_port, val, 16 ); /* Send Data */
+ TLan_ClearBit( TLAN_NET_SIO_MCLK, sio ); /* Idle cycle */
+ TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
- /*************************************************************************
- * TLan_StartTx
- *
- * Returns: 0 on success, non-zero on failure.
- * Parms: skb A pointer to the sk_buff containing the frame to
- * be sent.
- * dev The device to send the data on.
- *
- * This function adds a frame to the Tx list to be sent ASAP. First it
- * verifies that the adapter is ready and there is room in the queue.
- * Then it sets up the next available list, copies the frame to the
- * corresponding buffer. If the adapter Tx channel is idle, it gives
- * adapter a Tx Go command on the list, otherwise it sets the forward
- * address of the previous list to point to this one. Then it frees
- * the sk_buff.
- *
- ************************************************************************/
-
- int TLan_StartTx( struct sk_buff *skb, struct device *dev )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- TLanList *tail_list;
- u8 *tail_buffer;
- int pad;
-
- if ( ! priv->phyOnline ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: %s PHY is not ready\n", dev->name );
- dev_kfree_skb( skb, FREE_WRITE );
- return 0;
- }
+ if ( minten )
+ TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
- tail_list = priv->txList + priv->txTail;
- if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: %s is busy (Head=%d Tail=%d)\n", dev->name, priv->txHead, priv->txTail );
- dev->tbusy = 1;
- priv->txBusyCount++;
- return 1;
- }
- tail_list->forward = 0;
- tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
- memcpy( tail_buffer, skb->data, skb->len );
- pad = TLAN_MIN_FRAME_SIZE - skb->len;
- if ( pad > 0 ) {
- tail_list->frameSize = (u16) skb->len + pad;
- tail_list->buffer[0].count = (u32) skb->len;
- tail_list->buffer[1].count = TLAN_LAST_BUFFER | (u32) pad;
- tail_list->buffer[1].address = virt_to_bus( TLanPadBuffer );
- } else {
- tail_list->frameSize = (u16) skb->len;
- tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
- tail_list->buffer[1].count = 0;
- tail_list->buffer[1].address = 0;
- }
- // are we transferring?
- cli();
- tail_list->cStat = TLAN_CSTAT_READY;
- if ( ! priv->txInProgress ) {
- priv->txInProgress = 1;
- outw( 0x4, dev->base_addr + TLAN_HOST_INT );
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Starting TX on buffer %d\n", priv->txTail );
- outl( virt_to_bus( tail_list ), dev->base_addr + TLAN_CH_PARM );
- outl( TLAN_HC_GO | TLAN_HC_ACK, dev->base_addr + TLAN_HOST_CMD );
- } else {
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: Adding buffer %d to TX channel\n", priv->txTail );
- if ( priv->txTail == 0 )
- ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward = virt_to_bus( tail_list );
- else
- ( priv->txList + ( priv->txTail - 1 ) )->forward = virt_to_bus( tail_list );
- }
- sti();
- priv->txTail++;
- if ( priv->txTail >= TLAN_NUM_TX_LISTS )
- priv->txTail = 0;
+ sti();
- dev_kfree_skb( skb, FREE_WRITE );
-
- dev->trans_start = jiffies;
- return 0;
+} /* TLan_MiiWriteReg */
- } /* TLan_StartTx */
+/*****************************************************************************
+******************************************************************************
+ ThunderLAN Driver Eeprom routines
+ The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
+ EEPROM. These functions are based on information in Microchip's
+ data sheet. I don't know how well this functions will work with
+ other EEPROMs.
+******************************************************************************
+*****************************************************************************/
- /*************************************************************************
- * TLan_HandleInterrupt
- *
- * Returns: Nothing
- * Parms: irq The line on which the interrupt occurred.
- * dev_id A pointer to the device assigned to this irq line.
- * regs ???
+
+ /***************************************************************
+ * TLan_EeSendStart
*
- * This function handles an interrupt generated by its assigned TLAN
- * adapter. The function deactivates interrupts on its adapter, records
- * the type of interrupt, executes the appropriate subhandler, and
- * acknowdges the interrupt to the adapter (thus re-enabling adapter
- * interrupts.
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
*
- ************************************************************************/
+ * This function sends a start cycle to an EEPROM attached
+ * to a TLAN chip.
+ *
+ **************************************************************/
- void TLan_HandleInterrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
- u32 ack;
- struct device *dev;
- u32 host_cmd;
- u16 host_int;
- int type;
+void TLan_EeSendStart( u16 io_base )
+{
+ u16 sio;
- dev = (struct device *) dev_id;
+ outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
- if ( dev->interrupt )
- printk( "TLAN: Re-entering interrupt handler for %s: %d.\n" , dev->name, dev->interrupt );
- dev->interrupt++;
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- cli();
+} /* TLan_EeSendStart */
- host_int = inw( dev->base_addr + TLAN_HOST_INT );
- outw( host_int, dev->base_addr + TLAN_HOST_INT ); // Deactivate Ints
- type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
- ack = TLanIntVector[type]( dev, host_int );
- sti();
+ /***************************************************************
+ * TLan_EeSendByte
+ *
+ * Returns:
+ * If the correct ack was received, 0, otherwise 1
+ * Parms: io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * data The 8 bits of information to
+ * send to the EEPROM.
+ * stop If TLAN_EEPROM_STOP is passed, a
+ * stop cycle is sent after the
+ * byte is sent after the ack is
+ * read.
+ *
+ * This function sends a byte on the serial EEPROM line,
+ * driving the clock to send each bit. The function then
+ * reverses transmission direction and reads an acknowledge
+ * bit.
+ *
+ **************************************************************/
+
+int TLan_EeSendByte( u16 io_base, u8 data, int stop )
+{
+ int err;
+ u8 place;
+ u16 sio;
+
+ outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+
+ // Assume clock is low, tx is enabled;
+ for ( place = 0x80; place != 0; place >>= 1 ) {
+ if ( place & data )
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ else
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ }
+ TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
- if ( ack ) {
- host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
- outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
- }
+ if ( ( ! err ) && stop ) {
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); // STOP, raise data while clock is h
+igh
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ }
- dev->interrupt--;
+ return ( err );
- } /* TLan_HandleInterrupts */
+} /* TLan_EeSendByte */
- /*************************************************************************
- * TLan_Close
- *
- * Returns: An error code.
- * Parms: dev The device structure of the device to close.
- *
- * This function shuts down the adapter. It records any stats, puts
- * the adapter into reset state, deactivates its time as needed, and
- * frees the irq it is using.
+ /***************************************************************
+ * TLan_EeReceiveByte
*
- ************************************************************************/
-
- int TLan_Close(struct device *dev)
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
-
- dev->start = 0;
- dev->tbusy = 1;
-
- TLan_ReadAndClearStats( dev, TLAN_RECORD );
- outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
- if ( priv->timerSetAt != 0 )
- del_timer( &priv->timer );
- free_irq( dev->irq, dev );
- TLAN_DBG( TLAN_DEBUG_GNRL, "TLAN: Device %s closed.\n", dev->name );
-
- MOD_DEC_USE_COUNT;
-
- return 0;
+ * Returns:
+ * Nothing
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * data An address to a char to hold the
+ * data sent from the EEPROM.
+ * stop If TLAN_EEPROM_STOP is passed, a
+ * stop cycle is sent after the
+ * byte is received, and no ack is
+ * sent.
+ *
+ * This function receives 8 bits of data from the EEPROM
+ * over the serial link. It then sends and ack bit, or no
+ * ack and a stop bit. This function is used to retrieve
+ * data after the address of a byte in the EEPROM has been
+ * sent.
+ *
+ **************************************************************/
+
+void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
+{
+ u8 place;
+ u16 sio;
+
+ outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
+ sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
+ *data = 0;
+
+ // Assume clock is low, tx is enabled;
+ TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
+ for ( place = 0x80; place; place >>= 1 ) {
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
+ *data |= place;
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ }
+
+ TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
+ if ( ! stop ) {
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); // Ack = 0
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ } else {
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); // No ack = 1 (?)
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); // STOP, raise data while clock is h
+igh
+ TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
+ TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
+ }
- } /* TLan_Close */
+} /* TLan_EeReceiveByte */
- /*************************************************************************
- * TLan_GetStats
- *
- * Returns: A pointer to the device's statistics structure.
- * Parms: dev The device structure to return the stats for.
+ /***************************************************************
+ * TLan_EeReadByte
*
- * This function updates the devices statistics by reading the TLAN
- * chip's onboard registers. Then it returns the address of the
- * statistics structure.
- *
- ************************************************************************/
-
- struct net_device_stats *TLan_GetStats( struct device *dev )
- {
- TLanPrivateInfo *priv = (TLanPrivateInfo *) dev->priv;
- int i;
-
- /* Should only read stats if open ? */
- TLan_ReadAndClearStats( dev, TLAN_RECORD );
-
- TLAN_DBG( TLAN_DEBUG_RX, "TLAN RECEIVE: %s EOC count = %d\n", dev->name, priv->rxEocCount );
- TLAN_DBG( TLAN_DEBUG_TX, "TLAN TRANSMIT: %s Busy count = %d\n", dev->name, priv->txBusyCount );
- if ( debug & TLAN_DEBUG_GNRL ) {
- TLan_PrintDio( dev->base_addr );
- TLan_PhyPrint( dev );
- }
- if ( debug & TLAN_DEBUG_LIST ) {
- for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
- TLan_PrintList( priv->rxList + i, "RX", i );
- for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
- TLan_PrintList( priv->txList + i, "TX", i );
- }
-
- return ( &( (TLanPrivateInfo *) dev->priv )->stats );
-
- } /* TLan_GetStats */
+ * Returns:
+ * No error = 0, else, the stage at which the error
+ * occured.
+ * Parms:
+ * io_base The IO port base address for the
+ * TLAN device with the EEPROM to
+ * use.
+ * ee_addr The address of the byte in the
+ * EEPROM whose contents are to be
+ * retrieved.
+ * data An address to a char to hold the
+ * data obtained from the EEPROM.
+ *
+ * This function reads a byte of information from an byte
+ * cell in the EEPROM.
+ *
+ **************************************************************/
+
+int TLan_EeReadByte( u16 io_base, u8 ee_addr, u8 *data )
+{
+ int err;
+
+ cli();
+
+ TLan_EeSendStart( io_base );
+ err = TLan_EeSendByte( io_base, 0xA0, TLAN_EEPROM_ACK );
+ if (err)
+ return 1;
+ err = TLan_EeSendByte( io_base, ee_addr, TLAN_EEPROM_ACK );
+ if (err)
+ return 2;
+ TLan_EeSendStart( io_base );
+ err = TLan_EeSendByte( io_base, 0xA1, TLAN_EEPROM_ACK );
+ if (err)
+ return 3;
+ TLan_EeReceiveByte( io_base, data, TLAN_EEPROM_STOP );
+ sti();
+ return 0;
+} /* TLan_EeReadByte */
- /*************************************************************************
- * TLan_SetMulticastList
- *
- * Returns: Nothing
- * Parms: dev The device structure to set the multicast list for.
- *
- * This function sets the TLAN adaptor to various receive modes. If the
- * IFF_PROMISC flag is set, promiscuous mode is acitviated. Otherwise,
- * promiscuous mode is turned off. If the IFF_ALLMULTI flag is set, then
- * the hash table is set to receive all group addresses. Otherwise, the
- * first three multicast addresses are stored in AREG_1-3, and the rest
- * are selected via the hash table, as necessary.
- *
- ************************************************************************/
-
- void TLan_SetMulticastList( struct device *dev )
- {
- struct dev_mc_list *dmi = dev->mc_list;
- u32 hash1 = 0;
- u32 hash2 = 0;
- int i;
- u32 offset;
- u8 tmp;
-
- if ( dev->flags & IFF_PROMISC ) {
- tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
- TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
- } else {
- tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
- TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
- if ( dev->flags & IFF_ALLMULTI ) {
- for ( i = 0; i < 3; i++ )
- TLan_SetMac( dev, i + 1, NULL );
- TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
- TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
- } else {
- for ( i = 0; i < dev->mc_count; i++ ) {
- if ( i < 3 ) {
- TLan_SetMac( dev, i + 1, (char *) &dmi->dmi_addr );
- } else {
- offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
- if ( offset < 32 )
- hash1 |= ( 1 << offset );
- else
- hash2 |= ( 1 << ( offset - 32 ) );
- }
- dmi = dmi->next;
- }
- for ( ; i < 3; i++ )
- TLan_SetMac( dev, i + 1, NULL );
- TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
- TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
- }
- }
- } /* TLan_SetRxMode */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov