patch-2.4.6 linux/include/asm-sh/pci-sh7751.h
Next file: linux/include/asm-sh/pci.h
Previous file: linux/include/asm-sh/mc146818rtc.h
Back to the patch index
Back to the overall index
- Lines: 282
- Date:
Wed Jun 27 13:55:29 2001
- Orig file:
v2.4.5/linux/include/asm-sh/pci-sh7751.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.4.5/linux/include/asm-sh/pci-sh7751.h linux/include/asm-sh/pci-sh7751.h
@@ -0,0 +1,281 @@
+/*
+ * Low-Level PCI Support for SH7751 targets
+ *
+ * Dustin McIntire (dustin@sensoria.com) (c) 2001
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ */
+
+#ifndef _PCI_SH7751_H_
+#define _PCI_SH7751_H_
+
+#include <linux/pci.h>
+
+/* set debug level 4=verbose...1=terse */
+//#define DEBUG_PCI 3
+#undef DEBUG_PCI
+
+#ifdef DEBUG_PCI
+#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
+#else
+#define PCIDBG(n, x...)
+#endif
+
+/* startup values */
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_SORT 0x100
+#define PCI_BIOS_SORT 0x200
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+/* Platform Specific Values */
+#define SH7751_VENDOR_ID 0x1054
+#define SH7751_DEVICE_ID 0x3505
+
+/* SH7751 Specific Values */
+#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
+#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */
+#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
+#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
+#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */
+#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
+
+#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
+#define PCI_REG(n) (SH7751_PCIREG_BASE+ n)
+
+#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
+ #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
+ #define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */
+#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */
+ #define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */
+ #define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */
+ #define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */
+ #define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */
+ #define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */
+ #define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */
+ #define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */
+ #define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */
+ #define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */
+ #define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */
+ #define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */
+ #define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */
+ #define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */
+ #define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */
+ #define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */
+ #define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */
+ #define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */
+ #define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */
+ #define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */
+ #define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */
+ #define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */
+#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */
+ #define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */
+ #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
+ #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
+ #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
+#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
+ #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
+ #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
+ #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
+ #define SH7751_PCICONF3_HD7 0x00800000 /* Single Funtion device */
+ #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */
+ #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */
+ #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */
+#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */
+ #define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */
+ #define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */
+#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */
+ #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
+ #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
+ #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
+ #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
+#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
+ #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
+ #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
+ #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
+ #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
+/* PCICONF7 - PCICONF10 are undefined */
+#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
+ #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
+ #define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */
+/* PCICONF12 is undefined */
+#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */
+ #define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */
+/* PCICONF14 is undefined */
+#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */
+ #define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */
+#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */
+ #define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */
+ #define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */
+ #define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */
+ #define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */
+ #define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */
+ #define SH7751_PCICONF16_VER 0x00070000 /* PM Version */
+ #define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */
+ #define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */
+#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */
+ #define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */
+ #define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */
+ #define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */
+ #define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */
+ #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */
+ #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */
+/* SH7715 Internal PCI Registers */
+#define SH7751_PCICR 0x100 /* PCI Control Register */
+ #define SH7751_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
+ #define SH7751_PCICR_TRSB 0x00000200 /* Target Read Single */
+ #define SH7751_PCICR_BSWP 0x00000100 /* Target Byte Swap */
+ #define SH7751_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
+ #define SH7751_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
+ #define SH7751_PCICR_MD 0x00000030 /* MD9 and MD10 status */
+ #define SH7751_PCICR_SERR 0x00000008 /* SERR output assert */
+ #define SH7751_PCICR_INTA 0x00000004 /* INTA output assert */
+ #define SH7751_PCICR_PRST 0x00000002 /* PCI Reset Assert */
+ #define SH7751_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
+#define SH7751_PCILSR0 0x104 /* PCI Local Space Register0 */
+#define SH7751_PCILSR1 0x108 /* PCI Local Space Register1 */
+#define SH7751_PCILAR0 0x10C /* PCI Local Address Register1 */
+#define SH7751_PCILAR1 0x110 /* PCI Local Address Register1 */
+#define SH7751_PCIINT 0x114 /* PCI Interrupt Register */
+ #define SH7751_PCIINT_MLCK 0x00008000 /* Master Lock Error */
+ #define SH7751_PCIINT_TABT 0x00004000 /* Target Abort Error */
+ #define SH7751_PCIINT_TRET 0x00000200 /* Target Retry Error */
+ #define SH7751_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
+ #define SH7751_PCIINT_PRTY 0x00000080 /* Address Parity Error */
+ #define SH7751_PCIINT_SERR 0x00000040 /* SERR Detection Error */
+ #define SH7751_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
+ #define SH7751_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Error Det. */
+ #define SH7751_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
+ #define SH7751_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
+ #define SH7751_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
+ #define SH7751_PCIINT_MRPD 0x00000002 /* Master Read PERR Detect */
+#define SH7751_PCIINTM 0x118 /* PCI Interrupt Mask Register */
+#define SH7751_PCIALR 0x11C /* Error Address Register */
+#define SH7751_PCICLR 0x120 /* Error Command/Data Register */
+ #define SH7751_PCICLR_MPIO 0x80000000 /* Error Command/Data Register */
+ #define SH7751_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
+ #define SH7751_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
+ #define SH7751_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
+ #define SH7751_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
+ #define SH7751_PCICLR_TGT 0x04000000 /* Target Transfer Error */
+ #define SH7751_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
+#define SH7751_PCIAINT 0x130 /* Arbiter Interrupt Register */
+ #define SH7751_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
+ #define SH7751_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
+ #define SH7751_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
+ #define SH7751_PCIAINT_TABT 0x00000008 /* Target Abort */
+ #define SH7751_PCIAINT_MABT 0x00000004 /* Master Abort */
+ #define SH7751_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
+ #define SH7751_PCIAINT_WDPE 0x00000002 /* Write Data Parity Error */
+#define SH7751_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
+#define SH7751_PCIBMLR 0x138 /* Error Bus Master Register */
+ #define SH7751_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
+ #define SH7751_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
+ #define SH7751_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
+ #define SH7751_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
+ #define SH7751_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
+#define SH7751_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
+ #define SH7751_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
+#define SH7751_PCIDPA0 0x180 /* DMA0 Transfer Addr. Register */
+#define SH7751_PCIDLA0 0x184 /* DMA0 Local Addr. Register */
+#define SH7751_PCIDTC0 0x188 /* DMA0 Transfer Cnt. Register */
+#define SH7751_PCIDCR0 0x18C /* DMA0 Control Register */
+ #define SH7751_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
+ #define SH7751_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
+ #define SH7751_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
+ #define SH7751_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
+ #define SH7751_PCIDCR_LHLD 0x00000020 /* Local Address Control */
+ #define SH7751_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
+ #define SH7751_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
+ #define SH7751_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
+ #define SH7751_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
+ #define SH7751_PCIDCR_STRT 0x00000001 /* DMA Start */
+#define SH7751_PCIDPA1 0x190 /* DMA1 Transfer Addr. Register */
+#define SH7751_PCIDLA1 0x194 /* DMA1 Local Addr. Register */
+#define SH7751_PCIDTC1 0x198 /* DMA1 Transfer Cnt. Register */
+#define SH7751_PCIDCR1 0x19C /* DMA1 Control Register */
+#define SH7751_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. Register */
+#define SH7751_PCIDLA2 0x1A4 /* DMA2 Local Addr. Register */
+#define SH7751_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. Register */
+#define SH7751_PCIDCR2 0x1AC /* DMA2 Control Register */
+#define SH7751_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. Register */
+#define SH7751_PCIDLA3 0x1B4 /* DMA3 Local Addr. Register */
+#define SH7751_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. Register */
+#define SH7751_PCIDCR3 0x1BC /* DMA3 Control Register */
+#define SH7751_PCIPAR 0x1C0 /* PIO Address Register */
+ #define SH7751_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
+ #define SH7751_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
+ #define SH7751_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
+ #define SH7751_PCIPAR_REGAD 0x000000FC /* Register Address Number */
+#define SH7751_PCIMBR 0x1C4 /* Memory Base Address Register */
+ #define SH7751_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
+ #define SH7751_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
+#define SH7751_PCIIOBR 0x1C8 /* I/O Base Address Register */
+ #define SH7751_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
+ #define SH7751_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
+#define SH7751_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
+ #define SH7751_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
+ #define SH7751_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
+#define SH7751_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
+#define SH7751_PCICLKR 0x1D4 /* Clock Ctrl. Register */
+ #define SH7751_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
+ #define SH7751_PCICLKR_BCSTP 0x00000002 /* BCLK Clock Stop */
+/* For definitions of BCR, MCR see ... */
+#define SH7751_PCIBCR1 0x1E0 /* Memory BCR1 Register */
+#define SH7751_PCIBCR2 0x1E4 /* Memory BCR2 Register */
+#define SH7751_PCIWCR1 0x1E8 /* Wait Control 1 Register */
+#define SH7751_PCIWCR2 0x1EC /* Wait Control 2 Register */
+#define SH7751_PCIWCR3 0x1F0 /* Wait Control 3 Register */
+#define SH7751_PCIMCR 0x1F4 /* Memory Control Register */
+#define SH7751_PCIPCTR 0x200 /* Port Control Register */
+ #define SH7751_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
+ #define SH7751_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
+ #define SH7751_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
+ #define SH7751_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
+ #define SH7751_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
+ #define SH7751_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
+ #define SH7751_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
+ #define SH7751_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
+ #define SH7751_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
+#define SH7751_PCIPDTR 0x204 /* Port Data Register */
+ #define SH7751_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
+ #define SH7751_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
+ #define SH7751_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
+ #define SH7751_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
+ #define SH7751_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
+ #define SH7751_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
+#define SH7751_PCIPDR 0x220 /* Port IO Data Register */
+
+/* Memory Control Registers */
+#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */
+#define SH7751_BCR2 0xFF800004 /* Memory BCR2 Register */
+#define SH7751_WCR1 0xFF800008 /* Wait Control 1 Register */
+#define SH7751_WCR2 0xFF80000C /* Wait Control 2 Register */
+#define SH7751_WCR3 0xFF800010 /* Wait Control 3 Register */
+#define SH7751_MCR 0xFF800014 /* Memory Control Register */
+
+/* General Memory Config Addresses */
+#define SH7751_CS0_BASE_ADDR 0x0
+#define SH7751_MEM_REGION_SIZE 0x04000000
+#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
+
+/* General PCI values */
+#define SH7751_PCI_HOST_BRIDGE 0x6
+
+/* External functions defined per platform i.e. Big Sur, SE... (these could be routed
+ * through the machine vectors... */
+extern int pcibios_init_platform(void);
+extern int pcibios_map_platform_irq(u8 slot, u8 pin);
+
+#endif /* _PCI_SH7751_H_ */
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)