patch-2.4.13 linux/include/asm-arm/arch-sa1100/bitsy.h

• Lines: 82
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.4.12/linux/include/asm-arm/arch-sa1100/bitsy.h
• Orig date: Mon Aug 27 12:41:47 2001

diff -u --recursive --new-file v2.4.12/linux/include/asm-arm/arch-sa1100/bitsy.h linux/include/asm-arm/arch-sa1100/bitsy.h
@@ -1,81 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2000 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-#ifndef _INCLUDE_BITSY_H_
-#define _INCLUDE_BITSY_H_
-
-#define GPIO_BITSY_NPOWER_BUTTON	GPIO_GPIO (0)
-#define GPIO_BITSY_ACTION_BUTTON	GPIO_GPIO (18)
-
-#define GPIO_BITSY_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_BITSY_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_BITSY_PCMCIA_IRQ0		GPIO_GPIO (21)
-#define GPIO_BITSY_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* audio sample rate clock generator */
-#define GPIO_BITSY_CLK_SET0		GPIO_GPIO (12)
-#define GPIO_BITSY_CLK_SET1		GPIO_GPIO (13)
-
-/* UDA1341 L3 Interface */
-#define GPIO_BITSY_L3_DATA		GPIO_GPIO (14)
-#define GPIO_BITSY_L3_CLOCK		GPIO_GPIO (16)
-#define GPIO_BITSY_L3_MODE		GPIO_GPIO (15)
-
-#define GPIO_BITSY_OPT_LOCK		GPIO_GPIO (22)
-#define GPIO_BITSY_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_BITSY_OPT_DET		GPIO_GPIO (27)
-
-#define GPIO_BITSY_COM_DCD		GPIO_GPIO (23)
-#define GPIO_BITSY_COM_CTS		GPIO_GPIO (25)
-#define GPIO_BITSY_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_BITSY_NPOWER_BUTTON    IRQ_GPIO0
-#define IRQ_GPIO_BITSY_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_BITSY_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_BITSY_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_BITSY_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_BITSY_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_BITSY_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_BITSY_OPT_DET		IRQ_GPIO27
-#define IRQ_GPIO_BITSY_COM_DCD          IRQ_GPIO23
-#define IRQ_GPIO_BITSY_COM_CTS          IRQ_GPIO25
-
-#define EGPIO_BITSY_VPP_ON		(1 << 0)
-#define EGPIO_BITSY_CARD_RESET		(1 << 1)  /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_BITSY_OPT_RESET		(1 << 2)  /* reset the attached option pack.  active high. */
-#define EGPIO_BITSY_CODEC_NRESET	(1 << 3)  /* reset the onboard UDA1341.  active low. */
-#define EGPIO_BITSY_OPT_NVRAM_ON	(1 << 4)  /* apply power to optionpack nvram, active high. */
-#define EGPIO_BITSY_OPT_ON		(1 << 5)  /* full power to option pack.  active high. */
-#define EGPIO_BITSY_LCD_ON       	(1 << 6)  /* enable 3.3V to LCD.  active high. */
-#define EGPIO_BITSY_RS232_ON		(1 << 7)  /* UART3 transceiver force on.  Active high. */
-#define EGPIO_BITSY_LCD_PCI		(1 << 8)  /* LCD control IC enable.  active high. */
-#define EGPIO_BITSY_IR_ON		(1 << 9)  /* apply power to IR module.  active high. */
-#define EGPIO_BITSY_AUD_AMP_ON		(1 << 10) /* apply power to audio power amp.  active high. */
-#define EGPIO_BITSY_AUD_PWR_ON		(1 << 11) /* apply poewr to reset of audio circuit.  active high. */
-#define EGPIO_BITSY_QMUTE		(1 << 12) /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_BITSY_IR_FSEL		(1 << 13) /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_BITSY_LCD_5V_ON		(1 << 14) /* enable 5V to LCD. active high. */
-#define EGPIO_BITSY_LVDD_ON		(1 << 15) /* enable 9V and -6.5V to LCD. */
-
-#ifndef __ASSEMBLY__
-#define BITSY_EGPIO	(*(volatile int *)0xf0000000)
-extern void clr_bitsy_egpio(unsigned long x);
-extern void set_bitsy_egpio(unsigned long x);
-#endif
-
-#endif