patch-2.1.44 linux/include/asm-mips/termbits.h

• Lines: 216
• Date: Thu Jun 26 12:33:40 1997
• Orig file: v2.1.43/linux/include/asm-mips/termbits.h
• Orig date: Thu Apr 11 23:49:44 1996

diff -u --recursive --new-file v2.1.43/linux/include/asm-mips/termbits.h linux/include/asm-mips/termbits.h
@@ -1,25 +1,26 @@
+/*
+ * termbits stuff for Linux/MIPS.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996 by Ralf Baechle
+ */
 #ifndef __ASM_MIPS_TERMBITS_H
 #define __ASM_MIPS_TERMBITS_H
 
-#include <asm/ioctl.h>
-#include <asm/ioctls.h>
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned long speed_t;
+typedef unsigned long tcflag_t;
 
 /*
  * The ABI says nothing about NCC but seems to use NCCS as
  * replacement for it in struct termio
  */
-#define NCC	8
 #define NCCS	23
-
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	char c_line;			/* line discipline */
-	unsigned char c_cc[NCCS];	/* control characters */
-};
-
 struct termios {
 	tcflag_t c_iflag;		/* input mode flags */
 	tcflag_t c_oflag;		/* output mode flags */
@@ -31,5 +32,175 @@
 	cc_t c_line;			/* line discipline */
 	cc_t c_cc[NCCS];		/* control characters */
 };
+
+/* c_cc characters */
+#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VQUIT		 1		/* Quit character [ISIG].  */
+#define VERASE		 2		/* Erase character [ICANON].  */
+#define VKILL		 3		/* Kill-line character [ICANON].  */
+#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON].  */
+#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON].  */
+#define VEOL2		 6		/* Second EOL character [ICANON].  */
+#define VSWTC		 7		/* ??? */
+#define VSWTCH		VSWTC
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
+#define VSUSP		10		/* Suspend character [ISIG].  */
+#if 0
+/*
+ * VDSUSP is not supported
+ */
+#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#endif
+#define VREPRINT	12		/* Reprint-line character [ICANON].  */
+#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VWERASE		14		/* Word-erase character [ICANON].  */
+#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
+#define VEOF		16		/* End-of-file character [ICANON].  */
+#define VEOL		17		/* End-of-line character [ICANON].  */
+
+/* c_iflag bits */
+#define IGNBRK	0000001		/* Ignore break condition.  */
+#define BRKINT	0000002		/* Signal interrupt on break.  */
+#define IGNPAR	0000004		/* Ignore characters with parity errors.  */
+#define PARMRK	0000010		/* Mark parity and framing errors.  */
+#define INPCK	0000020		/* Enable input parity check.  */
+#define ISTRIP	0000040		/* Strip 8th bit off characters.  */
+#define INLCR	0000100		/* Map NL to CR on input.  */
+#define IGNCR	0000200		/* Ignore CR.  */
+#define ICRNL	0000400		/* Map CR to NL on input.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define IUCLC	0001000		/* Map upper case to lower case on input.  */
+#endif
+#define IXON	0002000		/* Enable start/stop output control.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define IXANY	0004000		/* Any character will restart after stop.  */
+#endif
+#define IXOFF	0010000		/* Enable start/stop input control.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#endif
+
+/* c_oflag bits */
+#define OPOST	0000001		/* Perform output processing.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define OLCUC	0000002		/* Map lower case to upper case on output.  */
+#define ONLCR	0000004		/* Map NL to CR-NL on output.  */
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+/*
+#define PAGEOUT ???
+#define WRAP    ???
+ */
+#endif
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060		/* Number of bits per byte (mask).  */
+#define   CS5	0000000		/* 5 bits per byte.  */
+#define   CS6	0000020		/* 6 bits per byte.  */
+#define   CS7	0000040		/* 7 bits per byte.  */
+#define   CS8	0000060		/* 8 bits per byte.  */
+#define CSTOPB	0000100		/* Two stop bits instead of one.  */
+#define CREAD	0000200		/* Enable receiver.  */
+#define PARENB	0000400		/* Parity enable.  */
+#define PARODD	0001000		/* Odd parity instead of even.  */
+#define HUPCL	0002000		/* Hang up on last close.  */
+#define CLOCAL	0004000		/* Ignore modem status lines.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define CBAUDEX 0010000
+#define  B57600  0010001
+#define  B115200 0010002
+#define  B230400 0010003
+#define  B460800 0010004
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CISPAR    010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+#endif
+
+/* c_lflag bits */
+#define ISIG	0000001		/* Enable signals.  */
+#define ICANON	0000002		/* Do erase and kill processing.  */
+#define XCASE	0000004
+#define ECHO	0000010		/* Enable echo.  */
+#define ECHOE	0000020		/* Visual erase for ERASE.  */
+#define ECHOK	0000040		/* Echo NL after KILL.  */
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define NOFLSH	0000200		/* Disable flush after interrupt.  */
+#define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOKE	0004000		/* Visual erase for KILL.  */
+#endif
+#define FLUSHO	0020000
+#if defined (__USE_BSD) || defined (__KERNEL__)
+#define PENDIN	0040000		/* Retype pending input (state).  */
+#endif
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
+#define ITOSTOP	TOSTOP
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0	/* Suspend output.  */
+#define	TCOON		1	/* Restart suspended output.  */
+#define	TCIOFF		2	/* Send a STOP character.  */
+#define	TCION		3	/* Send a START character.  */
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define	TCIOFLUSH	2	/* Discard all pending data.  */
+
+/* tcsetattr uses these */
+#define	TCSANOW		TCSETS	/* Change immediately.  */
+#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
+#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
 
 #endif /* __ASM_MIPS_TERMBITS_H */