Return-Path: robot-board@oberon.com
Received: by media.mit.edu (5.57/DA1.0.4.amt)
	id AA23187; Tue, 26 Oct 93 14:44:38 -0400
Received: from  ([127.0.0.1]) by oberon.com (4.1/SMI-4.1_Armado.MX)
	id AA16213; Tue, 26 Oct 93 14:39:25 EDT
Date: Tue, 26 Oct 93 14:39:25 EDT
Message-Id: <199310261833.AA23850@vision1.cc.gatech.edu>
Errors-To: gkulosa@oberon.com
Reply-To: gboone@cc.gatech.edu
Originator: robot-board@oberon.com
Sender: gkulosa@oberon.com
Precedence: bulk
From: Gary Noel Boone <gboone@cc.gatech.edu>
To: Multiple recipients of list <robot-board@oberon.com>
Subject: Re: 6.270 assembly
X-Listprocessor-Version: 6.0b -- ListProcessor by Anastasios Kotsikonas
Status: O


6.270 board building tip:

Think about how you want to arrange the lone LED (is it the
IR indicator?) before building! If you follow the directions,
you will bury it under the expansion board and the TIP22 
transistor! My solution was to bend the TIP down to the 
left and at an angle. However, the pins are only just long enough
to do this. A better solution might be found with some planning
ahead.

Good luck,
Gary