# Video for Linux Two API Specification

## Revision 0.24

### Michael H Schimek

`<mschimek@gmx.at>`

### Bill Dirks

### Hans Verkuil

### Martin Rubli

Copyright © 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli

This document is copyrighted © 1999-2008 by Bill Dirks, Michael H. Schimek, Hans Verkuil and Martin Rubli.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the appendix entitled "GNU Free Documentation License".

Programming examples can be used and distributed without restrictions.

List of Figures
1-1. Image Cropping, Insertion and Scaling
3-1. Field Order, Top Field First Transmitted
3-2. Field Order, Bottom Field First Transmitted
4-1. Line synchronization
4-2. ITU-R 525 line numbering (M/NTSC and M/PAL)
4-3. ITU-R 625 line numbering

List of Examples
1-1. Information about the current video input
1-2. Switching to the first video input
1-3. Information about the current audio input
1-4. Switching to the first audio input
1-5. Information about the current video standard
1-6. Listing the video standards supported by the current input
1-7. Selecting a new video standard
1-8. Enumerating all controls
1-9. Changing controls
1-10. Resetting the cropping parameters
1-11. Simple downscaling
1-12. Selecting an output area
1-13. Current scaling factor and pixel aspect
2-1. ITU-R Rec. BT.601 color conversion
2-1. `V4L2_PIX_FMT_BGR24` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_SBGGR8` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_SBGGR16` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_GREY` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_Y16` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_YUYV` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_UYVY` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_Y41P` 8 × 4 pixel image
2-1. `V4L2_PIX_FMT_YVU420` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_YVU410` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_YUV422P` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_YUV411P` 4 × 4 pixel image
2-1. `V4L2_PIX_FMT_NV12` 4 × 4 pixel image
3-1. Mapping buffers
3-2. Initiating streaming I/O with user pointers
4-1. Finding a framebuffer device for OSD

# Introduction

Video For Linux Two is the second version of the Video For Linux API, a kernel interface for analog radio and video capture and output drivers.

Early drivers used ad-hoc interfaces. These were replaced in Linux 2.2 by Alan Cox' V4L API, based on the interface of the bttv driver. In 1999 Bill Dirks started the development of V4L2 to fix some shortcomings of V4L and to support a wider range of devices. The API was revised again in 2002 prior to its inclusion in Linux 2.5/2.6, and work continues on improvements and additions while maintaining compatibility with existing drivers and applications. In 2006/2007 efforts began on FreeBSD drivers with a V4L2 interface.

This book documents the V4L2 API. Intended audience are driver and application writers.

If you have questions or ideas regarding the API, please write to the Video4Linux mailing list: https://listman.redhat.com/mailman/listinfo/video4linux-list. For inquiries about the V4L2 specification contact the maintainer mschimek@gmx.at.

The latest version of this document and the DocBook SGML sources are hosted at http://v4l2spec.bytesex.org, and http://linuxtv.org/downloads/video4linux/API/V4L2_API.

# Chapter 1. Common API Elements

Programming a V4L2 device consists of these steps:

- Opening the device

- Changing device properties, selecting a video and audio input, video standard, picture brightness a. o.

- Negotiating a data format

- Negotiating an input/output method

- The actual input/output loop

- Closing the device

In practice most steps are optional and can be executed out of order. It depends on the V4L2 device type, you can read about the details in Chapter 4. In this chapter we will discuss the basic concepts applicable to all devices.

## 1.1. Opening and Closing Devices

### 1.1.1. Device Naming

V4L2 drivers are implemented as kernel modules, loaded manually by the system administrator or automatically when a device is first opened. The driver modules plug into the "videodev" kernel module. It provides helper functions and a common application interface specified in this document.

Each driver thus loaded registers one or more device nodes with major number 81 and a minor number between 0 and 255. Assigning minor numbers to V4L2 devices is entirely up to the system administrator, this is primarily intended to solve conflicts between devices.[1] The module options to select minor numbers are named after the device special file with a "_nr" suffix. For example "video_nr" for `/dev/video` video capture devices. The number is an offset to the base minor number associated with the device type. [2] When the driver supports multiple devices of the same type more than one minor number can be assigned, separated by commas:

    > insmod mydriver.o video_nr=0,1 radio_nr=0,1

In `/etc/modules.conf` this may be written as:

    alias char-major-81-0 mydriver
    alias char-major-81-1 mydriver
    alias char-major-81-64 mydriver
    options mydriver video_nr=0,1 radio_nr=0,1

  When an application attempts to open a device special file with major number 81 and minor number 0, 1, or 64, load "mydriver" (and the "videodev" module it depends upon).
  Register the first two video capture devices with minor number 0 and 1 (base number is 0), the first two radio device with minor number 64 and 65 (base 64).

When no minor number is given as module option the driver supplies a default. Chapter 4 recommends the base minor numbers to be used for the various device types. Obviously minor numbers must be unique. When the number is already in use the offending device will not be registered.

By convention system administrators create various character device special files with these major and minor numbers in the `/dev` directory. The names recomended for the different V4L2 device types are listed in Chapter 4.

The creation of character special files (with mknod) is a privileged operation and devices cannot be opened by major and minor number. That means applications cannot reliable scan for loaded or installed drivers. The user must enter a device name, or the application can try the conventional device names.

Under the device filesystem (devfs) the minor number options are ignored. V4L2 drivers (or by proxy the "videodev" module) automatically create the required device files in the `/dev/v4l` directory using the conventional device names above.

### 1.1.2. Related Devices

Devices can support several related functions. For example video capturing, video overlay and VBI capturing are related because these functions share, amongst other, the same video input and tuner frequency. V4L and earlier versions of V4L2 used the same device name and minor number for video capturing and overlay, but different ones for VBI. Experience showed this approach has several problems[3], and to make things worse the V4L videodev module used to prohibit multiple opens of a device.

As a remedy the present version of the V4L2 API relaxed the concept of device types with specific names and minor numbers. For compatibility with old applications drivers must still register different minor numbers to assign a default function to the device. But if related functions are supported by the driver they must be available under all registered minor numbers. The desired function can be selected after opening the device as described in Chapter 4.

Imagine a driver supporting video capturing, video overlay, raw VBI capturing, and FM radio reception. It registers three devices with minor number 0, 64 and 224 (this numbering scheme is inherited from the V4L API). Regardless if `/dev/video` (81, 0) or `/dev/vbi` (81, 224) is opened the application can select any one of the video capturing, overlay or VBI capturing functions. Without programming (e. g. reading from the device with dd or cat) `/dev/video` captures video images, while `/dev/vbi` captures raw VBI data. `/dev/radio` (81, 64) is invariable a radio device, unrelated to the video functions. Being unrelated does not imply the devices can be used at the same time, however. The `open()` function may very well return an EBUSY error code.

Besides video input or output the hardware may also support audio sampling or playback. If so, these functions are implemented as OSS or ALSA PCM devices and eventually OSS or ALSA audio mixer. The V4L2 API makes no provisions yet to find these related devices. If you have an idea please write to the Video4Linux mailing list: https://listman.redhat.com/mailman/listinfo/video4linux-list.

### 1.1.3. Multiple Opens

In general, V4L2 devices can be opened more than once. When this is supported by the driver, users can for example start a "panel" application to change controls like brightness or audio volume, while another application captures video and audio. In other words, panel applications are comparable to an OSS or ALSA audio mixer application. When a device supports multiple functions like capturing and overlay simultaneously, multiple opens allow concurrent use of the device by forked processes or specialized applications.

Multiple opens are optional, although drivers should permit at least concurrent accesses without data exchange, i. e. panel applications. This implies `open()` can return an EBUSY error code when the device is already in use, as well as `ioctl()` functions initiating data exchange (namely the `VIDIOC_S_FMT` ioctl), and the `read()` and `write()` functions.

Mere opening a V4L2 device does not grant exclusive access.[4] Initiating data exchange however assigns the right to read or write the requested type of data, and to change related properties, to this file descriptor. Applications can request additional access privileges using the priority mechanism described in Section 1.3.

### 1.1.4. Shared Data Streams

V4L2 drivers should not support multiple applications reading or writing the same data stream on a device by copying buffers, time multiplexing or similar means. This is better handled by a proxy application in user space. When the driver supports stream sharing anyway it must be implemented transparently. The V4L2 API does not specify how conflicts are solved.

### 1.1.5. Functions

To open and close V4L2 devices applications use the `open()` and `close()` function, respectively. Devices are programmed using the `ioctl()` function as explained in the following sections.

## 1.2. Querying Capabilities

Because V4L2 covers a wide variety of devices not all aspects of the API are equally applicable to all types of devices. Furthermore devices of the same type have different capabilities and this specification permits the omission of a few complicated and less important parts of the API.

The `VIDIOC_QUERYCAP` ioctl is available to check if the kernel device is compatible with this specification, and to query the functions and I/O methods supported by the device. Other features can be queried by calling the respective ioctl, for example `VIDIOC_ENUMINPUT` to learn about the number, types and names of video connectors on the device. Although abstraction is a major objective of this API, the ioctl also allows driver specific applications to reliable identify the driver.

All V4L2 drivers must support `VIDIOC_QUERYCAP`. Applications should always call this ioctl after opening the device.

## 1.3. Application Priority

When multiple applications share a device it may be desirable to assign them different priorities. Contrary to the traditional "rm -rf /" school of thought a video recording application could for example block other applications from changing video controls or switching the current TV channel. Another objective is to permit low priority applications working in background, which can be preempted by user controlled applications and automatically regain control of the device at a later time.

Since these features cannot be implemented entirely in user space V4L2 defines the `VIDIOC_G_PRIORITY` and `VIDIOC_S_PRIORITY` ioctls to request and query the access priority associate with a file descriptor. Opening a device assigns a medium priority, compatible with earlier versions of V4L2 and drivers not supporting these ioctls. Applications requiring a different priority will usually call `VIDIOC_S_PRIORITY` after verifying the device with the `VIDIOC_QUERYCAP` ioctl.

Ioctls changing driver properties, such as `VIDIOC_S_INPUT`, return an EBUSY error code after another application obtained higher priority. An event mechanism to notify applications about asynchronous property changes has been proposed but not added yet.

## 1.4. Video Inputs and Outputs

Video inputs and outputs are physical connectors of a device. These can be for example RF connectors (antenna/cable), CVBS a.k.a. Composite Video, S-Video or RGB connectors. Only video and VBI capture devices have inputs, output devices have outputs, at least one each. Radio devices have no video inputs or outputs.

To learn about the number and attributes of the available inputs and outputs applications can enumerate them with the `VIDIOC_ENUMINPUT` and `VIDIOC_ENUMOUTPUT` ioctl, respectively. The struct v4l2_input returned by the `VIDIOC_ENUMINPUT` ioctl also contains signal status information applicable when the current video input is queried.

The `VIDIOC_G_INPUT` and `VIDIOC_G_OUTPUT` ioctl return the index of the current video input or output. To select a different input or output applications call the `VIDIOC_S_INPUT` and `VIDIOC_S_OUTPUT` ioctl. Drivers must implement all the input ioctls when the device has one or more inputs, all the output ioctls when the device has one or more outputs.

Example 1-1. Information about the current video input

    struct v4l2_input input;
    int index;

    if (-1 == ioctl (fd, VIDIOC_G_INPUT, &index)) {
            perror ("VIDIOC_G_INPUT");
            exit (EXIT_FAILURE);
    }

    memset (&input, 0, sizeof (input));
    input.index = index;

    if (-1 == ioctl (fd, VIDIOC_ENUMINPUT, &input)) {
            perror ("VIDIOC_ENUMINPUT");
            exit (EXIT_FAILURE);
    }

    printf ("Current input: %s\n", input.name);

Example 1-2. Switching to the first video input

    int index;

    index = 0;

    if (-1 == ioctl (fd, VIDIOC_S_INPUT, &index)) {
            perror ("VIDIOC_S_INPUT");
            exit (EXIT_FAILURE);
    }

## 1.5. Audio Inputs and Outputs

Audio inputs and outputs are physical connectors of a device. Video capture devices have inputs, output devices have outputs, zero or more each. Radio devices have no audio inputs or outputs. They have exactly one tuner which in fact is an audio source, but this API associates tuners with video inputs or outputs only, and radio devices have none of these.[5] A connector on a TV card to loop back the received audio signal to a sound card is not considered an audio output.

Audio and video inputs and outputs are associated. Selecting a video source also selects an audio source. This is most evident when the video and audio source is a tuner. Further audio connectors can combine with more than one video input or output. Assumed two composite video inputs and two audio inputs exist, there may be up to four valid combinations. The relation of video and audio connectors is defined in the `audioset` field of the respective struct v4l2_input or struct v4l2_output, where each bit represents the index number, starting at zero, of one audio input or output.

To learn about the number and attributes of the available inputs and outputs applications can enumerate them with the `VIDIOC_ENUMAUDIO` and `VIDIOC_ENUMAUDOUT` ioctl, respectively. The struct v4l2_audio returned by the `VIDIOC_ENUMAUDIO` ioctl also contains signal status information applicable when the current audio input is queried.

The `VIDIOC_G_AUDIO` and `VIDIOC_G_AUDOUT` ioctl report the current audio input and output, respectively. Note that, unlike `VIDIOC_G_INPUT` and `VIDIOC_G_OUTPUT` these ioctls return a structure as `VIDIOC_ENUMAUDIO` and `VIDIOC_ENUMAUDOUT` do, not just an index.

To select an audio input and change its properties applications call the `VIDIOC_S_AUDIO` ioctl. To select an audio output (which presently has no changeable properties) applications call the `VIDIOC_S_AUDOUT` ioctl.

Drivers must implement all input ioctls when the device has one or more inputs, all output ioctls when the device has one or more outputs. When the device has any audio inputs or outputs the driver must set the `V4L2_CAP_AUDIO` flag in the struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl.

Example 1-3. Information about the current audio input

    struct v4l2_audio audio;

    memset (&audio, 0, sizeof (audio));

    if (-1 == ioctl (fd, VIDIOC_G_AUDIO, &audio)) {
            perror ("VIDIOC_G_AUDIO");
            exit (EXIT_FAILURE);
    }

    printf ("Current input: %s\n", audio.name);

Example 1-4. Switching to the first audio input

    struct v4l2_audio audio;

    memset (&audio, 0, sizeof (audio)); /* clear audio.mode, audio.reserved */

    audio.index = 0;

    if (-1 == ioctl (fd, VIDIOC_S_AUDIO, &audio)) {
            perror ("VIDIOC_S_AUDIO");
            exit (EXIT_FAILURE);
    }

## 1.6. Tuners and Modulators

### 1.6.1. Tuners

Video input devices can have one or more tuners demodulating a RF signal. Each tuner is associated with one or more video inputs, depending on the number of RF connectors on the tuner. The `type` field of the respective struct v4l2_input returned by the `VIDIOC_ENUMINPUT` ioctl is set to `V4L2_INPUT_TYPE_TUNER` and its `tuner` field contains the index number of the tuner.

Radio devices have exactly one tuner with index zero, no video inputs.

To query and change tuner properties applications use the `VIDIOC_G_TUNER` and `VIDIOC_S_TUNER` ioctl, respectively. The struct v4l2_tuner returned by `VIDIOC_G_TUNER` also contains signal status information applicable when the tuner of the current video input, or a radio tuner is queried. Note that `VIDIOC_S_TUNER` does not switch the current tuner, when there is more than one at all. The tuner is solely determined by the current video input. Drivers must support both ioctls and set the `V4L2_CAP_TUNER` flag in the struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl when the device has one or more tuners.

### 1.6.2. Modulators

Video output devices can have one or more modulators, uh, modulating a video signal for radiation or connection to the antenna input of a TV set or video recorder. Each modulator is associated with one or more video outputs, depending on the number of RF connectors on the modulator. The `type` field of the respective struct v4l2_output returned by the `VIDIOC_ENUMOUTPUT` ioctl is set to `V4L2_OUTPUT_TYPE_MODULATOR` and its `modulator` field contains the index number of the modulator. This specification does not define radio output devices.

To query and change modulator properties applications use the `VIDIOC_G_MODULATOR` and `VIDIOC_S_MODULATOR` ioctl. Note that `VIDIOC_S_MODULATOR` does not switch the current modulator, when there is more than one at all. The modulator is solely determined by the current video output. Drivers must support both ioctls and set the `V4L2_CAP_TUNER` (sic) flag in the struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl when the device has one or more modulators.

### 1.6.3. Radio Frequency

To get and set the tuner or modulator radio frequency applications use the `VIDIOC_G_FREQUENCY` and `VIDIOC_S_FREQUENCY` ioctl which both take a pointer to a struct v4l2_frequency. These ioctls are used for TV and radio devices alike. Drivers must support both ioctls when the tuner or modulator ioctls are supported, or when the device is a radio device.

### 1.6.4. Satellite Receivers

To be discussed. See also proposals by Peter Schlaf, video4linux-list@redhat.com on 23 Oct 2002, subject: "Re: [V4L] Re: v4l2 api".

## 1.7. Video Standards

Video devices typically support one or more different video standards or variations of standards. Each video input and output may support another set of standards. This set is reported by the `std` field of struct v4l2_input and struct v4l2_output returned by the `VIDIOC_ENUMINPUT` and `VIDIOC_ENUMOUTPUT` ioctl, respectively.

V4L2 defines one bit for each analog video standard currently in use worldwide, and sets aside bits for driver defined standards, e. g. hybrid standards to watch NTSC video tapes on PAL TVs and vice versa. Applications can use the predefined bits to select a particular standard, although presenting the user a menu of supported standards is preferred. To enumerate and query the attributes of the supported standards applications use the `VIDIOC_ENUMSTD` ioctl.

Many of the defined standards are actually just variations of a few major standards. The hardware may in fact not distinguish between them, or do so internal and switch automatically. Therefore enumerated standards also contain sets of one or more standard bits.

Assume a hypothetic tuner capable of demodulating B/PAL, G/PAL and I/PAL signals. The first enumerated standard is a set of B and G/PAL, switched automatically depending on the selected radio frequency in UHF or VHF band. Enumeration gives a "PAL-B/G" or "PAL-I" choice. Similar a Composite input may collapse standards, enumerating "PAL-B/G/H/I", "NTSC-M" and "SECAM-D/K".[6]

To query and select the standard used by the current video input or output applications call the `VIDIOC_G_STD` and `VIDIOC_S_STD` ioctl, respectively. The received standard can be sensed with the `VIDIOC_QUERYSTD` ioctl. Note parameter of all these ioctls is a pointer to a v4l2_std_id type (a standard set), not an index into the standard enumeration.[7] Drivers must implement all video standard ioctls when the device has one or more video inputs or outputs.

Special rules apply to USB cameras where the notion of video standards makes little sense. More generally any capture device, output devices accordingly, which is

- incapable of capturing fields or frames at the nominal rate of the video standard, or

- where timestamps refer to the instant the field or frame was received by the driver, not the capture time, or

- where sequence numbers refer to the frames received by the driver, not the captured frames.

Here the driver shall set the `std` field of struct v4l2_input and struct v4l2_output to zero, the `VIDIOC_G_STD`, `VIDIOC_S_STD`, `VIDIOC_QUERYSTD` and `VIDIOC_ENUMSTD` ioctls shall return the EINVAL error code.[8]

Example 1-5. Information about the current video standard

    v4l2_std_id std_id;
    struct v4l2_standard standard;

    if (-1 == ioctl (fd, VIDIOC_G_STD, &std_id)) {
            /* Note when VIDIOC_ENUMSTD always returns EINVAL this
               is no video device or it falls under the USB exception,
               and VIDIOC_G_STD returning EINVAL is no error. */

            perror ("VIDIOC_G_STD");
            exit (EXIT_FAILURE);
    }

    memset (&standard, 0, sizeof (standard));
    standard.index = 0;

    while (0 == ioctl (fd, VIDIOC_ENUMSTD, &standard)) {
            if (standard.id & std_id) {
                   printf ("Current video standard: %s\n", standard.name);
                   exit (EXIT_SUCCESS);
            }

            standard.index++;
    }

    /* EINVAL indicates the end of the enumeration, which cannot be
       empty unless this device falls under the USB exception. */

    if (errno == EINVAL || standard.index == 0) {
            perror ("VIDIOC_ENUMSTD");
            exit (EXIT_FAILURE);
    }

Example 1-6. Listing the video standards supported by the current input

    struct v4l2_input input;
    struct v4l2_standard standard;

    memset (&input, 0, sizeof (input));

    if (-1 == ioctl (fd, VIDIOC_G_INPUT, &input.index)) {
            perror ("VIDIOC_G_INPUT");
            exit (EXIT_FAILURE);
    }

    if (-1 == ioctl (fd, VIDIOC_ENUMINPUT, &input)) {
            perror ("VIDIOC_ENUM_INPUT");
            exit (EXIT_FAILURE);
    }

    printf ("Current input %s supports:\n", input.name);

    memset (&standard, 0, sizeof (standard));
    standard.index = 0;

    while (0 == ioctl (fd, VIDIOC_ENUMSTD, &standard)) {
            if (standard.id & input.std)
                    printf ("%s\n", standard.name);

            standard.index++;
    }

    /* EINVAL indicates the end of the enumeration, which cannot be
       empty unless this device falls under the USB exception. */

    if (errno != EINVAL || standard.index == 0) {
            perror ("VIDIOC_ENUMSTD");
            exit (EXIT_FAILURE);
    }

Example 1-7. Selecting a new video standard

    struct v4l2_input input;
    v4l2_std_id std_id;

    memset (&input, 0, sizeof (input));

    if (-1 == ioctl (fd, VIDIOC_G_INPUT, &input.index)) {
            perror ("VIDIOC_G_INPUT");
            exit (EXIT_FAILURE);
    }

    if (-1 == ioctl (fd, VIDIOC_ENUMINPUT, &input)) {
            perror ("VIDIOC_ENUM_INPUT");
            exit (EXIT_FAILURE);
    }

    if (0 == (input.std & V4L2_STD_PAL_BG)) {
            fprintf (stderr, "Oops. B/G PAL is not supported.\n");
            exit (EXIT_FAILURE);
    }

    /* Note this is also supposed to work when only B
       or G/PAL is supported. */

    std_id = V4L2_STD_PAL_BG;

    if (-1 == ioctl (fd, VIDIOC_S_STD, &std_id)) {
            perror ("VIDIOC_S_STD");
            exit (EXIT_FAILURE);
    }

## 1.8. User Controls

Devices typically have a number of user-settable controls such as brightness, saturation and so on, which would be presented to the user on a graphical user interface. But, different devices will have different controls available, and furthermore, the range of possible values, and the default value will vary from device to device. The control ioctls provide the information and a mechanism to create a nice user interface for these controls that will work correctly with any device.

All controls are accessed using an ID value. V4L2 defines several IDs for specific purposes. Drivers can also implement their own custom controls using `V4L2_CID_PRIVATE_BASE` and higher values. The pre-defined control IDs have the prefix `V4L2_CID_`, and are listed in Table 1-1. The ID is used when querying the attributes of a control, and when getting or setting the current value.

Generally applications should present controls to the user without assumptions about their purpose. Each control comes with a name string the user is supposed to understand. When the purpose is non-intuitive the driver writer should provide a user manual, a user interface plug-in or a driver specific panel application. Predefined IDs were introduced to change a few controls programmatically, for example to mute a device during a channel switch.

Drivers may enumerate different controls after switching the current video input or output, tuner or modulator, or audio input or output. Different in the sense of other bounds, another default and current value, step size or other menu items. A control with a certain custom ID can also change name and type.[9] Control values are stored globally, they do not change when switching except to stay within the reported bounds. They also do not change e. g. when the device is opened or closed, when the tuner radio frequency is changed or generally never without application request. Since V4L2 specifies no event mechanism, panel applications intended to cooperate with other panel applications (be they built into a larger application, as a TV viewer) may need to regularly poll control values to update their user interface.[10]

Table 1-1. Control IDs

ID | Type | Description
--- | --- | ---
`V4L2_CID_BASE` |  | First predefined ID, equal to `V4L2_CID_BRIGHTNESS`.
`V4L2_CID_USER_BASE` |  | Synonym of `V4L2_CID_BASE`.
`V4L2_CID_BRIGHTNESS` | integer | Picture brightness, or more precisely, the black level.
`V4L2_CID_CONTRAST` | integer | Picture contrast or luma gain.
`V4L2_CID_SATURATION` | integer | Picture color saturation or chroma gain.
`V4L2_CID_HUE` | integer | Hue or color balance.
`V4L2_CID_AUDIO_VOLUME` | integer | Overall audio volume. Note some drivers also provide an OSS or ALSA mixer interface.
`V4L2_CID_AUDIO_BALANCE` | integer | Audio stereo balance. Minimum corresponds to all the way left, maximum to right.
`V4L2_CID_AUDIO_BASS` | integer | Audio bass adjustment.
`V4L2_CID_AUDIO_TREBLE` | integer | Audio treble adjustment.
`V4L2_CID_AUDIO_MUTE` | boolean | Mute audio, i. e. set the volume to zero, however without affecting `V4L2_CID_AUDIO_VOLUME`. Like ALSA drivers, V4L2 drivers must mute at load time to avoid excessive noise. Actually the entire device should be reset to a low power consumption state.
`V4L2_CID_AUDIO_LOUDNESS` | boolean | Loudness mode (bass boost).
`V4L2_CID_BLACK_LEVEL` | integer | Another name for brightness (not a synonym of `V4L2_CID_BRIGHTNESS`). This control is deprecated and should not be used in new drivers and applications.
`V4L2_CID_AUTO_WHITE_BALANCE` | boolean | Automatic white balance (cameras).
`V4L2_CID_DO_WHITE_BALANCE` | button | This is an action control. When set (the value is ignored), the device will do a white balance and then hold the current setting. Contrast this with the boolean `V4L2_CID_AUTO_WHITE_BALANCE`, which, when activated, keeps adjusting the white balance.
`V4L2_CID_RED_BALANCE` | integer | Red chroma balance.
`V4L2_CID_BLUE_BALANCE` | integer | Blue chroma balance.
`V4L2_CID_GAMMA` | integer | Gamma adjust.
`V4L2_CID_WHITENESS` | integer | Whiteness for grey-scale devices. This is a synonym for `V4L2_CID_GAMMA`. This control is deprecated and should not be used in new drivers and applications.
`V4L2_CID_EXPOSURE` | integer | Exposure (cameras). [Unit?]
`V4L2_CID_AUTOGAIN` | boolean | Automatic gain/exposure control.
`V4L2_CID_GAIN` | integer | Gain control.
`V4L2_CID_HFLIP` | boolean | Mirror the picture horizontally.
`V4L2_CID_VFLIP` | boolean | Mirror the picture vertically.
`V4L2_CID_HCENTER_DEPRECATED` (formerly `V4L2_CID_HCENTER`) | integer | Horizontal image centering. This control is deprecated. New drivers and applications should use the Camera class controls `V4L2_CID_PAN_ABSOLUTE`, `V4L2_CID_PAN_RELATIVE` and `V4L2_CID_PAN_RESET` instead.
`V4L2_CID_VCENTER_DEPRECATED` (formerly `V4L2_CID_VCENTER`) | integer | Vertical image centering. Centering is intended to physically adjust cameras. For image cropping see Section 1.11, for clipping Section 4.2. This control is deprecated. New drivers and applications should use the Camera class controls `V4L2_CID_TILT_ABSOLUTE`, `V4L2_CID_TILT_RELATIVE` and `V4L2_CID_TILT_RESET` instead.
`V4L2_CID_POWER_LINE_FREQUENCY` | integer | Enables a power line frequency filter to avoid flicker. Possible values are: `V4L2_CID_POWER_LINE_FREQUENCY_DISABLED` (0), `V4L2_CID_POWER_LINE_FREQUENCY_50HZ` (1) and `V4L2_CID_POWER_LINE_FREQUENCY_60HZ` (2).
`V4L2_CID_HUE_AUTO` | boolean | Enables automatic hue control by the device. The effect of setting `V4L2_CID_HUE` while automatic hue control is enabled is undefined, drivers should ignore such request.
`V4L2_CID_WHITE_BALANCE_TEMPERATURE` | integer | This control specifies the white balance settings as a color temperature in Kelvin. A driver should have a minimum of 2800 (incandescent) to 6500 (daylight). For more information about color temperature see Wikipedia.
`V4L2_CID_SHARPNESS` | integer | Adjusts the sharpness filters in a camera. The minimum value disables the filters, higher values give a sharper picture.
`V4L2_CID_BACKLIGHT_COMPENSATION` | integer | Adjusts the backlight compensation in a camera. The minimum value disables backlight compensation.
`V4L2_CID_LASTP1` |  | End of the predefined control IDs (currently `V4L2_CID_BACKLIGHT_COMPENSATION` + 1).
`V4L2_CID_PRIVATE_BASE` |  | ID of the first custom (driver specific) control. Applications depending on particular custom controls should check the driver name and version, see Section 1.2.

Applications can enumerate the available controls with the `VIDIOC_QUERYCTRL` and `VIDIOC_QUERYMENU` ioctls, get and set a control value with the `VIDIOC_G_CTRL` and `VIDIOC_S_CTRL` ioctls. Drivers must implement `VIDIOC_QUERYCTRL`, `VIDIOC_G_CTRL` and `VIDIOC_S_CTRL` when the device has one or more controls, `VIDIOC_QUERYMENU` when it has one or more menu type controls.

Example 1-8. Enumerating all controls

    struct v4l2_queryctrl queryctrl;
    struct v4l2_querymenu querymenu;

    static void
    enumerate_menu (void)
    {
            printf ("  Menu items:\n");

            memset (&querymenu, 0, sizeof (querymenu));
            querymenu.id = queryctrl.id;

            for (querymenu.index = queryctrl.minimum;
                 querymenu.index <= queryctrl.maximum;
                  querymenu.index++) {
                    if (0 == ioctl (fd, VIDIOC_QUERYMENU, &querymenu)) {
                            printf ("  %s\n", querymenu.name);
                    } else {
                            perror ("VIDIOC_QUERYMENU");
                            exit (EXIT_FAILURE);
                    }
            }
    }

    memset (&queryctrl, 0, sizeof (queryctrl));

    for (queryctrl.id = V4L2_CID_BASE;
         queryctrl.id < V4L2_CID_LASTP1;
         queryctrl.id++) {
            if (0 == ioctl (fd, VIDIOC_QUERYCTRL, &queryctrl)) {
                    if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
                            continue;

                    printf ("Control %s\n", queryctrl.name);

                    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
                            enumerate_menu ();
            } else {
                    if (errno == EINVAL)
                            continue;

                    perror ("VIDIOC_QUERYCTRL");
                    exit (EXIT_FAILURE);
            }
    }

    for (queryctrl.id = V4L2_CID_PRIVATE_BASE;;
         queryctrl.id++) {
            if (0 == ioctl (fd, VIDIOC_QUERYCTRL, &queryctrl)) {
                    if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)
                            continue;

                    printf ("Control %s\n", queryctrl.name);

                    if (queryctrl.type == V4L2_CTRL_TYPE_MENU)
                            enumerate_menu ();
            } else {
                    if (errno == EINVAL)
                            break;

                    perror ("VIDIOC_QUERYCTRL");
                    exit (EXIT_FAILURE);
            }
    }

Example 1-9. Changing controls

    struct v4l2_queryctrl queryctrl;
    struct v4l2_control control;

    memset (&queryctrl, 0, sizeof (queryctrl));
    queryctrl.id = V4L2_CID_BRIGHTNESS;

    if (-1 == ioctl (fd, VIDIOC_QUERYCTRL, &queryctrl)) {
            if (errno != EINVAL) {
                    perror ("VIDIOC_QUERYCTRL");
                    exit (EXIT_FAILURE);
            } else {
                    printf ("V4L2_CID_BRIGHTNESS is not supported\n");
            }
    } else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) {
            printf ("V4L2_CID_BRIGHTNESS is not supported\n");
    } else {
            memset (&control, 0, sizeof (control));
            control.id = V4L2_CID_BRIGHTNESS;
            control.value = queryctrl.default_value;

            if (-1 == ioctl (fd, VIDIOC_S_CTRL, &control)) {
                    perror ("VIDIOC_S_CTRL");
                    exit (EXIT_FAILURE);
            }
    }

    memset (&control, 0, sizeof (control));
    control.id = V4L2_CID_CONTRAST;

    if (0 == ioctl (fd, VIDIOC_G_CTRL, &control)) {
            control.value += 1;

            /* The driver may clamp the value or return ERANGE, ignored here */

            if (-1 == ioctl (fd, VIDIOC_S_CTRL, &control)
                && errno != ERANGE) {
                    perror ("VIDIOC_S_CTRL");
                    exit (EXIT_FAILURE);
            }
    /* Ignore if V4L2_CID_CONTRAST is unsupported */
    } else if (errno != EINVAL) {
            perror ("VIDIOC_G_CTRL");
            exit (EXIT_FAILURE);
    }

    control.id = V4L2_CID_AUDIO_MUTE;
    control.value = TRUE; /* silence */

    /* Errors ignored */
    ioctl (fd, VIDIOC_S_CTRL, &control);

## 1.9. Extended Controls

### 1.9.1. Introduction

The control mechanism as originally designed was meant to be used for user settings (brightness, saturation, etc). However, it turned out to be a very useful model for implementing more complicated driver APIs where each driver implements only a subset of a larger API.

The MPEG encoding API was the driving force behind designing and implementing this extended control mechanism: the MPEG standard is quite large and the currently supported hardware MPEG encoders each only implement a subset of this standard. Further more, many parameters relating to how the video is encoded into an MPEG stream are specific to the MPEG encoding chip since the MPEG standard only defines the format of the resulting MPEG stream, not how the video is actually encoded into that format.

Unfortunately, the original control API lacked some features needed for these new uses and so it was extended into the (not terribly originally named) extended control API.

### 1.9.2. The Extended Control API

Three new ioctls are available: `VIDIOC_G_EXT_CTRLS`, `VIDIOC_S_EXT_CTRLS` and `VIDIOC_TRY_EXT_CTRLS`. These ioctls act on arrays of controls (as opposed to the `VIDIOC_G_CTRL` and `VIDIOC_S_CTRL` ioctls that act on a single control). This is needed since it is often required to atomically change several controls at once.

Each of the new ioctls expects a pointer to a struct v4l2_ext_controls. This structure contains a pointer to the control array, a count of the number of controls in that array and a control class. Control classes are used to group similar controls into a single class. For example, control class `V4L2_CTRL_CLASS_USER` contains all user controls (i. e. all controls that can also be set using the old `VIDIOC_S_CTRL` ioctl). Control class `V4L2_CTRL_CLASS_MPEG` contains all controls relating to MPEG encoding, etc.

All controls in the control array must belong to the specified control class. An error is returned if this is not the case.

It is also possible to use an empty control array (count == 0) to check whether the specified control class is supported.

The control array is a struct v4l2_ext_control array. The `v4l2_ext_control` structure is very similar to struct v4l2_control, except for the fact that it also allows for 64-bit values and pointers to be passed (although the latter is not yet used anywhere).

It is important to realize that due to the flexibility of controls it is necessary to check whether the control you want to set actually is supported in the driver and what the valid range of values is. So use the `VIDIOC_QUERYCTRL` and `VIDIOC_QUERYMENU` ioctls to check this. Also note that it is possible that some of the menu indices in a control of type `V4L2_CTRL_TYPE_MENU` may not be supported (`VIDIOC_QUERYMENU` will return an error). A good example is the list of supported MPEG audio bitrates. Some drivers only support one or two bitrates, others support a wider range.

### 1.9.3. Enumerating Extended Controls

The recommended way to enumerate over the extended controls is by using `VIDIOC_QUERYCTRL` in combination with the `V4L2_CTRL_FLAG_NEXT_CTRL` flag:

    struct v4l2_queryctrl qctrl;

    qctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL;
    while (0 == ioctl (fd, VIDIOC_QUERYCTRL, &qctrl)) {
            /* ... */
            qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
    }

The initial control ID is set to 0 ORed with the `V4L2_CTRL_FLAG_NEXT_CTRL` flag. The `VIDIOC_QUERYCTRL` ioctl will return the first control with a higher ID than the specified one. When no such controls are found an error is returned.

If you want to get all controls within a specific control class, then you can set the initial `qctrl.id` value to the control class and add an extra check to break out of the loop when a control of another control class is found:

    qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL;
    while (0 == ioctl (fd, VIDIOC_QUERYCTRL, &qctrl)) {
            if (V4L2_CTRL_ID2CLASS (qctrl.id) != V4L2_CTRL_CLASS_MPEG)
                    break;
                    /* ... */
                    qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
            }

The 32-bit `qctrl.id` value is subdivided into three bit ranges: the top 4 bits are reserved for flags (e. g. `V4L2_CTRL_FLAG_NEXT_CTRL`) and are not actually part of the ID. The remaining 28 bits form the control ID, of which the most significant 12 bits define the control class and the least significant 16 bits identify the control within the control class. It is guaranteed that these last 16 bits are always non-zero for controls. The range of 0x1000 and up are reserved for driver-specific controls. The macro `V4L2_CTRL_ID2CLASS(id)` returns the control class ID based on a control ID.

If the driver does not support extended controls, then `VIDIOC_QUERYCTRL` will fail when used in combination with `V4L2_CTRL_FLAG_NEXT_CTRL`. In that case the old method of enumerating control should be used (see 1.8). But if it is supported, then it is guaranteed to enumerate over all controls, including driver-private controls.

### 1.9.4. Creating Control Panels

It is possible to create control panels for a graphical user interface where the user can select the various controls. Basically you will have to iterate over all controls using the method described above. Each control class starts with a control of type `V4L2_CTRL_TYPE_CTRL_CLASS`. `VIDIOC_QUERYCTRL` will return the name of this control class which can be used as the title of a tab page within a control panel.

The flags field of struct v4l2_queryctrl also contains hints on the behavior of the control. See the `VIDIOC_QUERYCTRL` documentation for more details.

### 1.9.5. MPEG Control Reference

Below all controls within the MPEG control class are described. First the generic controls, then controls specific for certain hardware.

#### 1.9.5.1. Generic MPEG Controls

Table 1-2. MPEG Control IDs

ID | Type |
| Description
--- | ---
`V4L2_CID_MPEG_CLASS` | class |
| The MPEG class descriptor. Calling `VIDIOC_QUERYCTRL` for this control will return a description of this control class. This description can be used as the caption of a Tab page in a GUI, for example.
`V4L2_CID_MPEG_STREAM_TYPE` | enum |
| The MPEG-1, -2 or -4 output stream type. One cannot assume anything here. Each hardware MPEG encoder tends to support different subsets of the available MPEG stream types. The currently defined stream types are:
`V4L2_MPEG_STREAM_TYPE_MPEG2_PS` | MPEG-2 program stream
`V4L2_MPEG_STREAM_TYPE_MPEG2_TS` | MPEG-2 transport stream
`V4L2_MPEG_STREAM_TYPE_MPEG1_SS` | MPEG-1 system stream
`V4L2_MPEG_STREAM_TYPE_MPEG2_DVD` | MPEG-2 DVD-compatible stream
`V4L2_MPEG_STREAM_TYPE_MPEG1_VCD` | MPEG-1 VCD-compatible stream
`V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD` | MPEG-2 SVCD-compatible stream
`V4L2_CID_MPEG_STREAM_PID_PMT` | integer |
| Program Map Table Packet ID for the MPEG transport stream (default 16)
`V4L2_CID_MPEG_STREAM_PID_AUDIO` | integer |
| Audio Packet ID for the MPEG transport stream (default 256)
`V4L2_CID_MPEG_STREAM_PID_VIDEO` | integer |
| Video Packet ID for the MPEG transport stream (default 260)
`V4L2_CID_MPEG_STREAM_PID_PCR` | integer |
| Packet ID for the MPEG transport stream carrying PCR fields (default 259)
`V4L2_CID_MPEG_STREAM_PES_ID_AUDIO` | integer |
| Audio ID for MPEG PES
`V4L2_CID_MPEG_STREAM_PES_ID_VIDEO` | integer |
| Video ID for MPEG PES
`V4L2_CID_MPEG_STREAM_VBI_FMT` | enum |
| Some cards can embed VBI data (e. g. Closed Caption, Teletext) into the MPEG stream. This control selects whether VBI data should be embedded, and if so, what embedding method should be used. The list of possible VBI formats depends on the driver. The currently defined VBI format types are:
`V4L2_MPEG_STREAM_VBI_FMT_NONE` | No VBI in the MPEG stream
`V4L2_MPEG_STREAM_VBI_FMT_IVTV` | VBI in private packets, IVTV format (documented in the kernel sources in the file `Documentation/video4linux/cx2341x/README.vbi`)
`V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ` | enum |
| MPEG Audio sampling frequency. Possible values are:
`V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100` | 44.1 kHz
`V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000` | 48 kHz
`V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000` | 32 kHz
`V4L2_CID_MPEG_AUDIO_ENCODING` | enum |
| MPEG Audio encoding. Possible values are:
`V4L2_MPEG_AUDIO_ENCODING_LAYER_1` | MPEG Layer I encoding
`V4L2_MPEG_AUDIO_ENCODING_LAYER_2` | MPEG Layer II encoding
`V4L2_MPEG_AUDIO_ENCODING_LAYER_3` | MPEG Layer III encoding
`V4L2_CID_MPEG_AUDIO_L1_BITRATE` | enum |
| Layer I bitrate. Possible values are:
`V4L2_MPEG_AUDIO_L1_BITRATE_32K` | 32 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_64K` | 64 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_96K` | 96 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_128K` | 128 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_160K` | 160 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_192K` | 192 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_224K` | 224 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_256K` | 256 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_288K` | 288 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_320K` | 320 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_352K` | 352 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_384K` | 384 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_416K` | 416 kbit/s
`V4L2_MPEG_AUDIO_L1_BITRATE_448K` | 448 kbit/s
`V4L2_CID_MPEG_AUDIO_L2_BITRATE` | enum |
| Layer II bitrate. Possible values are:
`V4L2_MPEG_AUDIO_L2_BITRATE_32K` | 32 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_48K` | 48 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_56K` | 56 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_64K` | 64 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_80K` | 80 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_96K` | 96 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_112K` | 112 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_128K` | 128 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_160K` | 160 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_192K` | 192 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_224K` | 224 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_256K` | 256 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_320K` | 320 kbit/s
`V4L2_MPEG_AUDIO_L2_BITRATE_384K` | 384 kbit/s
`V4L2_CID_MPEG_AUDIO_L3_BITRATE` | enum |
| Layer III bitrate. Possible values are:
`V4L2_MPEG_AUDIO_L3_BITRATE_32K` | 32 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_40K` | 40 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_48K` | 48 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_56K` | 56 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_64K` | 64 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_80K` | 80 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_96K` | 96 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_112K` | 112 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_128K` | 128 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_160K` | 160 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_192K` | 192 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_224K` | 224 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_256K` | 256 kbit/s
`V4L2_MPEG_AUDIO_L3_BITRATE_320K` | 320 kbit/s
`V4L2_CID_MPEG_AUDIO_MODE` | enum |
| MPEG Audio mode. Possible values are:
`V4L2_MPEG_AUDIO_MODE_STEREO` | Stereo
`V4L2_MPEG_AUDIO_MODE_JOINT_STEREO` | Joint Stereo
`V4L2_MPEG_AUDIO_MODE_DUAL` | Bilingual
`V4L2_MPEG_AUDIO_MODE_MONO` | Mono
`V4L2_CID_MPEG_AUDIO_MODE_EXTENSION` | enum |
| Joint Stereo audio mode extension. In Layer I and II they indicate which subbands are in intensity stereo. All other subbands are coded in stereo. Layer III is not (yet) supported. Possible values are:
`V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4` | Subbands 4-31 in intensity stereo
`V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8` | Subbands 8-31 in intensity stereo
`V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12` | Subbands 12-31 in intensity stereo
`V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16` | Subbands 16-31 in intensity stereo
`V4L2_CID_MPEG_AUDIO_EMPHASIS` | enum |
| Audio Emphasis. Possible values are:
`V4L2_MPEG_AUDIO_EMPHASIS_NONE` | None
`V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS` | 50/15 microsecond emphasis
`V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17` | CCITT J.17
`V4L2_CID_MPEG_AUDIO_CRC` | enum |
| CRC method. Possible values are:
`V4L2_MPEG_AUDIO_CRC_NONE` | None
`V4L2_MPEG_AUDIO_CRC_CRC16` | 16 bit parity check
`V4L2_CID_MPEG_AUDIO_MUTE` | bool |
| Mutes the audio when capturing. This is not done by muting audio hardware, which can still produce a slight hiss, but in the encoder itself, guaranteeing a fixed and reproducable audio bitstream. 0 = unmuted, 1 = muted.
`V4L2_CID_MPEG_VIDEO_ENCODING` | enum |
| MPEG Video encoding method. Possible values are:
`V4L2_MPEG_VIDEO_ENCODING_MPEG_1` | MPEG-1 Video encoding
`V4L2_MPEG_VIDEO_ENCODING_MPEG_2` | MPEG-2 Video encoding
`V4L2_CID_MPEG_VIDEO_ASPECT` | enum |
| Video aspect. Possible values are:
`V4L2_MPEG_VIDEO_ASPECT_1x1` |
`V4L2_MPEG_VIDEO_ASPECT_4x3` |
`V4L2_MPEG_VIDEO_ASPECT_16x9` |
`V4L2_MPEG_VIDEO_ASPECT_221x100` |
`V4L2_CID_MPEG_VIDEO_B_FRAMES` | integer |
| Number of B-Frames (default 2)
`V4L2_CID_MPEG_VIDEO_GOP_SIZE` | integer |
| GOP size (default 12)
`V4L2_CID_MPEG_VIDEO_GOP_CLOSURE` | bool |
| GOP closure (default 1)
`V4L2_CID_MPEG_VIDEO_PULLDOWN` | bool |
| Enable 3:2 pulldown (default 0)
`V4L2_CID_MPEG_VIDEO_BITRATE_MODE` | enum |
| Video bitrate mode. Possible values are:
`V4L2_MPEG_VIDEO_BITRATE_MODE_VBR` | Variable bitrate
`V4L2_MPEG_VIDEO_BITRATE_MODE_CBR` | Constant bitrate
`V4L2_CID_MPEG_VIDEO_BITRATE` | integer |
| Video bitrate in bits per second.
`V4L2_CID_MPEG_VIDEO_BITRATE_PEAK` | integer |
| Peak video bitrate in bits per second. Must be larger or equal to the average video bitrate. It is ignored if the video bitrate mode is set to constant bitrate.
`V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION` | integer |
| For every captured frame, skip this many subsequent frames (default 0).
`V4L2_CID_MPEG_VIDEO_MUTE` | bool |
| "Mutes" the video to a fixed color when capturing. This is useful for testing, to produce a fixed video bitstream. 0 = unmuted, 1 = muted.
`V4L2_CID_MPEG_VIDEO_MUTE_YUV` | integer |
| Sets the "mute" color of the video. The supplied 32-bit integer is interpreted as follows (bit 0 = least significant bit):
Bit 0:7 | V chrominance information
Bit 8:15 | U chrominance information
Bit 16:23 | Y luminance information
Bit 24:31 | Must be zero.

#### 1.9.5.2. CX2341x MPEG Controls

The following MPEG class controls deal with MPEG encoding settings that are specific to the Conexant CX23415 and CX23416 MPEG encoding chips.

Table 1-3. CX2341x Control IDs

ID | Type |
| Description
--- | ---
`V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE` | enum |
| Sets the Spatial Filter mode (default `MANUAL`). Possible values are:
`V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL` | Choose the filter manually
`V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO` | Choose the filter automatically
`V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER` | integer (0-15) |
| The setting for the Spatial Filter. 0 = off, 15 = maximum. (Default is 0.)
`V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE` | enum |
| Select the algorithm to use for the Luma Spatial Filter (default `1D_HOR`). Possible values:
`V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF` | No filter
`V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR` | One-dimensional horizontal
`V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT` | One-dimensional vertical
`V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE` | Two-dimensional separable
`V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE` | Two-dimensional symmetrical non-separable
`V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE` | enum |
| Select the algorithm for the Chroma Spatial Filter (default `1D_HOR`). Possible values are:
`V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF` | No filter
`V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR` | One-dimensional horizontal
`V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE` | enum |
| Sets the Temporal Filter mode (default `MANUAL`). Possible values are:
`V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL` | Choose the filter manually
`V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO` | Choose the filter automatically
`V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER` | integer (0-31) |
| The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default is 8 for full-scale capturing and 0 for scaled capturing.)
`V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE` | enum |
| Median Filter Type (default `OFF`). Possible values are:
`V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF` | No filter
`V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR` | Horizontal filter
`V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT` | Vertical filter
`V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT` | Horizontal and vertical filter
`V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG` | Diagonal filter
`V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM` | integer (0-255) |
| Threshold above which the luminance median filter is enabled (default 0)
`V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP` | integer (0-255) |
| Threshold below which the luminance median filter is enabled (default 255)
`V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM` | integer (0-255) |
| Threshold above which the chroma median filter is enabled (default 0)
`V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP` | integer (0-255) |
| Threshold below which the chroma median filter is enabled (default 255)
`V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS` | bool |
| The CX2341X MPEG encoder can insert one empty MPEG-2 PES packet into the stream between every four video frames. The packet size is 2048 bytes, including the packet_start_code_prefix and stream_id fields. The stream_id is 0xBF (private stream 2). The payload consists of 0x00 bytes, to be filled in by the application. 0 = do not insert, 1 = insert packets.

### 1.9.6. Camera Control Reference

The Camera class includes controls for mechanical (or equivalent digital) features of a device such as controllable lenses or sensors.

Table 1-4. Camera Control IDs

ID | Type |
| Description
--- | ---
`V4L2_CID_CAMERA_CLASS` | class |
| The Camera class descriptor. Calling `VIDIOC_QUERYCTRL` for this control will return a description of this control class.
`V4L2_CID_EXPOSURE_AUTO` | integer |
| Enables automatic adjustments of the exposure time and/or iris aperture. The effect of manual changes of the exposure time or iris aperture while these features are enabled is undefined, drivers should ignore such requests. Possible values are:
`V4L2_EXPOSURE_AUTO` | Automatic exposure time, automatic iris aperture.
`V4L2_EXPOSURE_MANUAL` | Manual exposure time, manual iris.
`V4L2_EXPOSURE_SHUTTER_PRIORITY` | Manual exposure time, auto iris.
`V4L2_EXPOSURE_APERTURE_PRIORITY` | Auto exposure time, manual iris.
`V4L2_CID_EXPOSURE_ABSOLUTE` | integer |
| Determines the exposure time of the camera sensor. The exposure time is limited by the frame interval. Drivers should interpret the values as 100 µs units, where the value 1 stands for 1/10000th of a second, 10000 for 1 second and 100000 for 10 seconds.
`V4L2_CID_EXPOSURE_AUTO_PRIORITY` | boolean |
| When `V4L2_CID_EXPOSURE_AUTO` is set to `AUTO` or `SHUTTER_PRIORITY`, this control determines if the device may dynamically vary the frame rate. By default this feature is disabled (0) and the frame rate must remain constant.
`V4L2_CID_PAN_RELATIVE` | integer |
| This control turns the camera horizontally by the specified amount. The unit is undefined. A positive value moves the camera to the right (clockwise when viewed from above), a negative value to the left. A value of zero does not cause motion.
`V4L2_CID_TILT_RELATIVE` | integer |
| This control turns the camera vertically by the specified amount. The unit is undefined. A positive value moves the camera up, a negative value down. A value of zero does not cause motion.
`V4L2_CID_PAN_RESET` | boolean |
| When this control is set to `TRUE` (1), the camera moves horizontally to the default position.
`V4L2_CID_TILT_RESET` | boolean |
| When this control is set to `TRUE` (1), the camera moves vertically to the default position.
`V4L2_CID_PAN_ABSOLUTE` | integer |
| This control turns the camera horizontally to the specified position. Positive values move the camera to the right (clockwise when viewed from above), negative values to the left. Drivers should interpret the values as arc seconds, with valid values between -180 * 3600 and +180 * 3600 inclusive.
`V4L2_CID_TILT_ABSOLUTE` | integer |
| This control turns the camera vertically to the specified position. Positive values move the camera up, negative values down. Drivers should interpret the values as arc seconds, with valid values between -180 * 3600 and +180 * 3600 inclusive.
`V4L2_CID_FOCUS_ABSOLUTE` | integer |
| This control sets the focal point of the camera to the specified position. The unit is undefined. Positive values set the focus closer to the camera, negative values towards infinity.
`V4L2_CID_FOCUS_RELATIVE` | integer |
| This control moves the focal point of the camera by the specified amount. The unit is undefined. Positive values move the focus closer to the camera, negative values towards infinity.
`V4L2_CID_FOCUS_AUTO` | boolean |
| Enables automatic focus adjustments. The effect of manual focus adjustments while this feature is enabled is undefined, drivers should ignore such requests.

## 1.10. Data Formats

### 1.10.1. Data Format Negotiation

Different devices exchange different kinds of data with applications, for example video images, raw or sliced VBI data, RDS datagrams. Even within one kind many different formats are possible, in particular an abundance of image formats. Although drivers must provide a default and the selection persists across closing and reopening a device, applications should always negotiate a data format before engaging in data exchange. Negotiation means the application asks for a particular format and the driver selects and reports the best the hardware can do to satisfy the request. Of course applications can also just query the current selection.

A single mechanism exists to negotiate all data formats using the aggregate struct v4l2_format and the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctls. Additionally the `VIDIOC_TRY_FMT` ioctl can be used to examine what the hardware could do, without actually selecting a new data format. The data formats supported by the V4L2 API are covered in the respective device section in Chapter 4. For a closer look at image formats see Chapter 2.

The `VIDIOC_S_FMT` ioctl is a major turning-point in the initialization sequence. Prior to this point multiple panel applications can access the same device concurrently to select the current input, change controls or modify other properties. The first `VIDIOC_S_FMT` assigns a logical stream (video data, VBI data etc.) exclusively to one file descriptor.

Exclusive means no other application, more precisely no other file descriptor, can grab this stream or change device properties inconsistent with the negotiated parameters. A video standard change for example, when the new standard uses a different number of scan lines, can invalidate the selected image format. Therefore only the file descriptor owning the stream can make invalidating changes. Accordingly multiple file descriptors which grabbed different logical streams prevent each other from interfering with their settings. When for example video overlay is about to start or already in progress, simultaneous video capturing may be restricted to the same cropping and image size.

When applications omit the `VIDIOC_S_FMT` ioctl its locking side effects are implied by the next step, the selection of an I/O method with the `VIDIOC_REQBUFS` ioctl or implicit with the first `read()` or `write()` call.

Generally only one logical stream can be assigned to a file descriptor, the exception being drivers permitting simultaneous video capturing and overlay using the same file descriptor for compatibility with V4L and earlier versions of V4L2. Switching the logical stream or returning into "panel mode" is possible by closing and reopening the device. Drivers may support a switch using `VIDIOC_S_FMT`.

All drivers exchanging data with applications must support the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctl. Implementation of the `VIDIOC_TRY_FMT` is highly recommended but optional.

### 1.10.2. Image Format Enumeration

Apart of the generic format negotiation functions a special ioctl to enumerate all image formats supported by video capture, overlay or output devices is available.[11]

The `VIDIOC_ENUM_FMT` ioctl must be supported by all drivers exchanging image data with applications.

> Important: Drivers are not supposed to convert image formats in kernel space. They must enumerate only formats directly supported by the hardware. If necessary driver writers should publish an example conversion routine or library for integration into applications.

## 1.11. Image Cropping, Insertion and Scaling

Some video capture devices can sample a subsection of the picture and shrink or enlarge it to an image of arbitrary size. We call these abilities cropping and scaling. Some video output devices can scale an image up or down and insert it at an arbitrary scan line and horizontal offset into a video signal.

Applications can use the following API to select an area in the video signal, query the default area and the hardware limits. Despite their name, the `VIDIOC_CROPCAP`, `VIDIOC_G_CROP` and `VIDIOC_S_CROP` ioctls apply to input as well as output devices.

Scaling requires a source and a target. On a video capture or overlay device the source is the video signal, and the cropping ioctls determine the area actually sampled. The target are images read by the application or overlaid onto the graphics screen. Their size (and position for an overlay) is negotiated with the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctls.

On a video output device the source are the images passed in by the application, and their size is again negotiated with the `VIDIOC_G/S_FMT` ioctls, or may be encoded in a compressed video stream. The target is the video signal, and the cropping ioctls determine the area where the images are inserted.

Source and target rectangles are defined even if the device does not support scaling or the `VIDIOC_G/S_CROP` ioctls. Their size (and position where applicable) will be fixed in this case. All capture and output device must support the `VIDIOC_CROPCAP` ioctl such that applications can determine if scaling takes place.

### 1.11.1. Cropping Structures

Figure 1-1. Image Cropping, Insertion and Scaling

For capture devices the coordinates of the top left corner, width and height of the area which can be sampled is given by the `bounds` substructure of the struct v4l2_cropcap returned by the `VIDIOC_CROPCAP` ioctl. To support a wide range of hardware this specification does not define an origin or units. However by convention drivers should horizontally count unscaled samples relative to 0H (the leading edge of the horizontal sync pulse, see Figure 4-1). Vertically ITU-R line numbers of the first field (Figure 4-2, Figure 4-3), multiplied by two if the driver can capture both fields.

The top left corner, width and height of the source rectangle, that is the area actually sampled, is given by struct v4l2_crop using the same coordinate system as struct v4l2_cropcap. Applications can use the `VIDIOC_G_CROP` and `VIDIOC_S_CROP` ioctls to get and set this rectangle. It must lie completely within the capture boundaries and the driver may further adjust the requested size and/or position according to hardware limitations.

Each capture device has a default source rectangle, given by the `defrect` substructure of struct v4l2_cropcap. The center of this rectangle shall align with the center of the active picture area of the video signal, and cover what the driver writer considers the complete picture. Drivers shall reset the source rectangle to the default when the driver is first loaded, but not later.

For output devices these structures and ioctls are used accordingly, defining the target rectangle where the images will be inserted into the video signal.

### 1.11.2. Scaling Adjustments

Video hardware can have various cropping, insertion and scaling limitations. It may only scale up or down, support only discrete scaling factors, or have different scaling abilities in horizontal and vertical direction. Also it may not support scaling at all. At the same time the struct v4l2_crop rectangle may have to be aligned, and both the source and target rectangles may have arbitrary upper and lower size limits. In particular the maximum `width` and `height` in struct v4l2_crop may be smaller than the struct v4l2_cropcap.`bounds` area. Therefore, as usual, drivers are expected to adjust the requested parameters and return the actual values selected.

Applications can change the source or the target rectangle first, as they may prefer a particular image size or a certain area in the video signal. If the driver has to adjust both to satisfy hardware limitations, the last requested rectangle shall take priority, and the driver should preferably adjust the opposite one. The `VIDIOC_TRY_FMT` ioctl however shall not change the driver state and therefore only adjust the requested rectangle.

Suppose scaling on a video capture device is restricted to a factor 1:1 or 2:1 in either direction and the target image size must be a multiple of 16 × 16 pixels. The source cropping rectangle is set to defaults, which are also the upper limit in this example, of 640 × 400 pixels at offset 0, 0. An application requests an image size of 300 × 225 pixels, assuming video will be scaled down from the "full picture" accordingly. The driver sets the image size to the closest possible values 304 × 224, then chooses the cropping rectangle closest to the requested size, that is 608 × 224 (224 × 2:1 would exceed the limit 400). The offset 0, 0 is still valid, thus unmodified. Given the default cropping rectangle reported by `VIDIOC_CROPCAP` the application can easily propose another offset to center the cropping rectangle.

Now the application may insist on covering an area using a picture aspect ratio closer to the original request, so it asks for a cropping rectangle of 608 × 456 pixels. The present scaling factors limit cropping to 640 × 384, so the driver returns the cropping size 608 × 384 and adjusts the image size to closest possible 304 × 192.

### 1.11.3. Examples

Source and target rectangles shall remain unchanged across closing and reopening a device, such that piping data into or out of a device will work without special preparations. More advanced applications should ensure the parameters are suitable before starting I/O.

Example 1-10. Resetting the cropping parameters

(A video capture device is assumed; change `V4L2_BUF_TYPE_VIDEO_CAPTURE` for other devices.)

    struct v4l2_cropcap cropcap;
    struct v4l2_crop crop;

    memset (&cropcap, 0, sizeof (cropcap));
    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
            perror ("VIDIOC_CROPCAP");
            exit (EXIT_FAILURE);
    }

    memset (&crop, 0, sizeof (crop));
    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
    crop.c = cropcap.defrect;

    /* Ignore if cropping is not supported (EINVAL). */

    if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
        && errno != EINVAL) {
            perror ("VIDIOC_S_CROP");
            exit (EXIT_FAILURE);
    }

Example 1-11. Simple downscaling

(A video capture device is assumed.)

    struct v4l2_cropcap cropcap;
    struct v4l2_format format;

    reset_cropping_parameters ();

    /* Scale down to 1/4 size of full picture. */

    memset (&format, 0, sizeof (format)); /* defaults */

    format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

    format.fmt.pix.width = cropcap.defrect.width >> 1;
    format.fmt.pix.height = cropcap.defrect.height >> 1;
    format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;

    if (-1 == ioctl (fd, VIDIOC_S_FMT, &format)) {
            perror ("VIDIOC_S_FORMAT");
            exit (EXIT_FAILURE);
    }

    /* We could check the actual image size now, the actual scaling factor
       or if the driver can scale at all. */

Example 1-12. Selecting an output area

    struct v4l2_cropcap cropcap;
    struct v4l2_crop crop;

    memset (&cropcap, 0, sizeof (cropcap));
    cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;

    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
            perror ("VIDIOC_CROPCAP");
            exit (EXIT_FAILURE);
    }

    memset (&crop, 0, sizeof (crop));

    crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
    crop.c = cropcap.defrect;

    /* Scale the width and height to 50 % of their original size
       and center the output. */

    crop.c.width /= 2;
    crop.c.height /= 2;
    crop.c.left += crop.c.width / 2;
    crop.c.top += crop.c.height / 2;

    /* Ignore if cropping is not supported (EINVAL). */

    if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
        && errno != EINVAL) {
            perror ("VIDIOC_S_CROP");
            exit (EXIT_FAILURE);
    }

Example 1-13. Current scaling factor and pixel aspect

(A video capture device is assumed.)

    struct v4l2_cropcap cropcap;
    struct v4l2_crop crop;
    struct v4l2_format format;
    double hscale, vscale;
    double aspect;
    int dwidth, dheight;

    memset (&cropcap, 0, sizeof (cropcap));
    cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

    if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
            perror ("VIDIOC_CROPCAP");
            exit (EXIT_FAILURE);
    }

    memset (&crop, 0, sizeof (crop));
    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

    if (-1 == ioctl (fd, VIDIOC_G_CROP, &crop)) {
            if (errno != EINVAL) {
                    perror ("VIDIOC_G_CROP");
                    exit (EXIT_FAILURE);
            }

            /* Cropping not supported. */
            crop.c = cropcap.defrect;
    }

    memset (&format, 0, sizeof (format));
    format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

    if (-1 == ioctl (fd, VIDIOC_G_FMT, &format)) {
            perror ("VIDIOC_G_FMT");
            exit (EXIT_FAILURE);
    }

    /* The scaling applied by the driver. */

    hscale = format.fmt.pix.width / (double) crop.c.width;
    vscale = format.fmt.pix.height / (double) crop.c.height;

    aspect = cropcap.pixelaspect.numerator /
             (double) cropcap.pixelaspect.denominator;
    aspect = aspect * hscale / vscale;

    /* Devices following ITU-R BT.601 do not capture
       square pixels. For playback on a computer monitor
       we should scale the images to this size. */

    dwidth = format.fmt.pix.width / aspect;
    dheight = format.fmt.pix.height;

## 1.12. Streaming Parameters

Streaming parameters are intended to optimize the video capture process as well as I/O. Presently applications can request a high quality capture mode with the `VIDIOC_S_PARM` ioctl.

The current video standard determines a nominal number of frames per second. If less than this number of frames is to be captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the `read()` or `write()`, which are not augmented by timestamps or sequence counters, and to avoid unneccessary data copying.

Finally these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For implications see the section discussing the `read()` function.

To get and set the streaming parameters applications call the `VIDIOC_G_PARM` and `VIDIOC_S_PARM` ioctl, respectively. They take a pointer to a struct v4l2_streamparm, which contains a union holding separate parameters for input and output devices.

These ioctls are optional, drivers need not implement them. If so, they return the EINVAL error code.

# Chapter 2. Image Formats

The V4L2 API was primarily designed for devices exchanging image data with applications. The `v4l2_pix_format` structure defines the format and layout of an image in memory. Image formats are negotiated with the `VIDIOC_S_FMT` ioctl. (The explanations here focus on video capturing and output, for overlay frame buffer formats see also `VIDIOC_G_FBUF`.)

Table 2-1. struct `v4l2_pix_format`

__u32 | `width` | Image width in pixels.
__u32 | `height` | Image height in pixels.
Applications set these fields to request an image size, drivers return the closest possible values. In case of planar formats the `width` and `height` applies to the largest plane. To avoid ambiguities drivers must return values rounded up to a multiple of the scale factor of any smaller planes. For example when the image format is YUV 4:2:0, `width` and `height` must be multiples of two.
__u32 | `pixelformat` | The pixel format or type of compression, set by the application. This is a little endian four character code. V4L2 defines standard RGB formats in Table 2-1, YUV formats in Section 2.5, and reserved codes in Table 2-8
enum v4l2_field | `field` | Video images are typically interlaced. Applications can request to capture or output only the top or bottom field, or both fields interlaced or sequentially stored in one buffer or alternating in separate buffers. Drivers return the actual field order selected. For details see Section 3.6.
__u32 | `bytesperline` | Distance in bytes between the leftmost pixels in two adjacent lines.
Both applications and drivers can set this field to request padding bytes at the end of each line. Drivers however may ignore the value requested by the application, returning `width` times bytes per pixel or a larger value required by the hardware. That implies applications can just set this field to zero to get a reasonable default. Video hardware may access padding bytes, therefore they must reside in accessible memory. Consider cases where padding bytes after the last line of an image cross a system page boundary. Input devices may write padding bytes, the value is undefined. Output devices ignore the contents of padding bytes. When the image format is planar the `bytesperline` value applies to the largest plane and is divided by the same factor as the `width` field for any smaller planes. For example the Cb and Cr planes of a YUV 4:2:0 image have half as many padding bytes following each line as the Y plane. To avoid ambiguities drivers must return a `bytesperline` value rounded up to a multiple of the scale factor.
__u32 | `sizeimage` | Size in bytes of the buffer to hold a complete image, set by the driver. Usually this is `bytesperline` times `height`. When the image consists of variable length compressed data this is the maximum number of bytes required to hold an image.
enum v4l2_colorspace | `colorspace` | This information supplements the `pixelformat` and must be set by the driver, see Section 2.2.
__u32 | `priv` | Reserved for custom (driver defined) additional information about formats. When not used drivers and applications must set this field to zero.

## 2.1. Standard Image Formats

In order to exchange images between drivers and applications, it is necessary to have standard image data formats which both sides will interpret the same way. V4L2 includes several such formats, and this section is intended to be an unambiguous specification of the standard image data formats in V4L2.

V4L2 drivers are not limited to these formats, however. Driver-specific formats are possible. In that case the application may depend on a codec to convert images to one of the standard formats when needed. But the data can still be stored and retrieved in the proprietary format. For example, a device may support a proprietary compressed format. Applications can still capture and save the data in the compressed format, saving much disk space, and later use a codec to convert the images to the X Windows screen format when the video is to be displayed.

Even so, ultimately, some standard formats are needed, so the V4L2 specification would not be complete without well-defined standard formats.

The V4L2 standard formats are mainly uncompressed formats. The pixels are always arranged in memory from left to right, and from top to bottom. The first byte of data in the image buffer is always for the leftmost pixel of the topmost row. Following that is the pixel immediately to its right, and so on until the end of the top row of pixels. Following the rightmost pixel of the row there may be zero or more bytes of padding to guarantee that each row of pixel data has a certain alignment. Following the pad bytes, if any, is data for the leftmost pixel of the second row from the top, and so on. The last row has just as many pad bytes after it as the other rows.

In V4L2 each format has an identifier which looks like `PIX_FMT_XXX`, defined in the videodev.h header file. These identifiers represent four character codes which are also listed below, however they are not the same as those used in the Windows world.

## 2.2. Colorspaces

[intro]

Gamma Correction

  [to do]

  E'R = f(R)

  E'G = f(G)

  E'B = f(B)

Construction of luminance and color-difference signals

  [to do]

  E'Y = CoeffR E'R + CoeffG E'G + CoeffB E'B

  (E'R - E'Y) = E'R - CoeffR E'R - CoeffG E'G - CoeffB E'B

  (E'B - E'Y) = E'B - CoeffR E'R - CoeffG E'G - CoeffB E'B

Re-normalized color-difference signals

  The color-difference signals are scaled back to unity range [-0.5;+0.5]:

  KB = 0.5 / (1 - CoeffB)

  KR = 0.5 / (1 - CoeffR)

  PB = KB (E'B - E'Y) = 0.5 (CoeffR / CoeffB) E'R + 0.5 (CoeffG / CoeffB) E'G + 0.5 E'B

  PR = KR (E'R - E'Y) = 0.5 E'R + 0.5 (CoeffG / CoeffR) E'G + 0.5 (CoeffB / CoeffR) E'B

Quantization

  [to do]

  Y' = (Lum. Levels - 1) · E'Y + Lum. Offset

  CB = (Chrom. Levels - 1) · PB + Chrom. Offset

  CR = (Chrom. Levels - 1) · PR + Chrom. Offset

  Rounding to the nearest integer and clamping to the range [0;255] finally yields the digital color components Y'CbCr stored in YUV images.

Example 2-1. ITU-R Rec. BT.601 color conversion

Forward Transformation

    int ER, EG, EB;         /* gamma corrected RGB input [0;255] */
    int Y1, Cb, Cr;         /* output [0;255] */

    double r, g, b;         /* temporaries */
    double y1, pb, pr;

    int
    clamp (double x)
    {
            int r = x;      /* round to nearest */

            if (r < 0)         return 0;
            else if (r > 255)  return 255;
            else               return r;
    }

    r = ER / 255.0;
    g = EG / 255.0;
    b = EB / 255.0;

    y1  =  0.299  * r + 0.587 * g + 0.114  * b;
    pb  = -0.169  * r - 0.331 * g + 0.5    * b;
    pr  =  0.5    * r - 0.419 * g - 0.081  * b;

    Y1 = clamp (219 * y1 + 16);
    Cb = clamp (224 * pb + 128);
    Cr = clamp (224 * pr + 128);

    /* or shorter */

    y1 = 0.299 * ER + 0.587 * EG + 0.114 * EB;

    Y1 = clamp ( (219 / 255.0)                    *       y1  + 16);
    Cb = clamp (((224 / 255.0) / (2 - 2 * 0.114)) * (EB - y1) + 128);
    Cr = clamp (((224 / 255.0) / (2 - 2 * 0.299)) * (ER - y1) + 128);

Inverse Transformation

    int Y1, Cb, Cr;         /* gamma pre-corrected input [0;255] */
    int ER, EG, EB;         /* output [0;255] */

    double r, g, b;         /* temporaries */
    double y1, pb, pr;

    int
    clamp (double x)
    {
            int r = x;      /* round to nearest */

            if (r < 0)         return 0;
            else if (r > 255)  return 255;
            else               return r;
    }

    y1 = (255 / 219.0) * (Y1 - 16);
    pb = (255 / 224.0) * (Cb - 128);
    pr = (255 / 224.0) * (Cr - 128);

    r = 1.0 * y1 + 0     * pb + 1.402 * pr;
    g = 1.0 * y1 - 0.344 * pb - 0.714 * pr;
    b = 1.0 * y1 + 1.772 * pb + 0     * pr;

    ER = clamp (r * 255); /* [ok? one should prob. limit y1,pb,pr] */
    EG = clamp (g * 255);
    EB = clamp (b * 255);

Table 2-2. enum v4l2_colorspace

Identifier | Value | Description | Chromaticities[a] | White Point | Gamma Correction | Luminance E'Y | Quantization
--- | --- | --- | --- | --- | --- | --- | ---
Red | Green | Blue | Y' | Cb, Cr
`V4L2_COLORSPACE_SMPTE170M` | 1 | NTSC/PAL according to SMPTE 170M, ITU BT.601 | x = 0.630, y = 0.340 | x = 0.310, y = 0.595 | x = 0.155, y = 0.070 | x = 0.3127, y = 0.3290, Illuminant D65 | E' = 4.5 I for I ≤0.018, 1.099 I0.45 - 0.099 for 0.018 < I | 0.299 E'R + 0.587 E'G + 0.114 E'B | 219 E'Y + 16 | 224 PB,R + 128
`V4L2_COLORSPACE_SMPTE240M` | 2 | 1125-Line (US) HDTV, see SMPTE 240M | x = 0.630, y = 0.340 | x = 0.310, y = 0.595 | x = 0.155, y = 0.070 | x = 0.3127, y = 0.3290, Illuminant D65 | E' = 4 I for I ≤0.0228, 1.1115 I0.45 - 0.1115 for 0.0228 < I | 0.212 E'R + 0.701 E'G + 0.087 E'B | 219 E'Y + 16 | 224 PB,R + 128
`V4L2_COLORSPACE_REC709` | 3 | HDTV and modern devices, see ITU BT.709 | x = 0.640, y = 0.330 | x = 0.300, y = 0.600 | x = 0.150, y = 0.060 | x = 0.3127, y = 0.3290, Illuminant D65 | E' = 4.5 I for I ≤0.018, 1.099 I0.45 - 0.099 for 0.018 < I | 0.2125 E'R + 0.7154 E'G + 0.0721 E'B | 219 E'Y + 16 | 224 PB,R + 128
`V4L2_COLORSPACE_BT878` | 4 | Broken Bt878 extents[b], ITU BT.601 | ? | ? | ? | ? | ? | 0.299 E'R + 0.587 E'G + 0.114 E'B | 237 E'Y + 16 | 224 PB,R + 128 (probably)
`V4L2_COLORSPACE_470_SYSTEM_M` | 5 | M/NTSC[c] according to ITU BT.470, ITU BT.601 | x = 0.67, y = 0.33 | x = 0.21, y = 0.71 | x = 0.14, y = 0.08 | x = 0.310, y = 0.316, Illuminant C | ? | 0.299 E'R + 0.587 E'G + 0.114 E'B | 219 E'Y + 16 | 224 PB,R + 128
`V4L2_COLORSPACE_470_SYSTEM_BG` | 6 | 625-line PAL and SECAM systems according to ITU BT.470, ITU BT.601 | x = 0.64, y = 0.33 | x = 0.29, y = 0.60 | x = 0.15, y = 0.06 | x = 0.313, y = 0.329, Illuminant D65 | ? | 0.299 E'R + 0.587 E'G + 0.114 E'B | 219 E'Y + 16 | 224 PB,R + 128
`V4L2_COLORSPACE_JPEG` | 7 | JPEG Y'CbCr, see JFIF, ITU BT.601 | ? | ? | ? | ? | ? | 0.299 E'R + 0.587 E'G + 0.114 E'B | 256 E'Y + 16[d] | 256 PB,R + 128
`V4L2_COLORSPACE_SRGB` | 8 | [?] | x = 0.640, y = 0.330 | x = 0.300, y = 0.600 | x = 0.150, y = 0.060 | x = 0.3127, y = 0.3290, Illuminant D65 | E' = 4.5 I for I ≤0.018, 1.099 I0.45 - 0.099 for 0.018 < I | n/a
Notes: a. The coordinates of the color primaries are given in the CIE system (1931) b. The ubiquitous Bt878 video capture chip quantizes E'Y to 238 levels, yielding a range of Y' = 16 … 253, unlike Rec. 601 Y' = 16 … 235. This is not a typo in the Bt878 documentation, it has been implemented in silicon. The chroma extents are unclear. c. No identifier exists for M/PAL which uses the chromaticities of M/NTSC, the remaining parameters are equal to B and G/PAL. d. Note JFIF quantizes Y'PBPR in range [0;+1] and [-0.5;+0.5] to 257 levels, however Y'CbCr signals are still clamped to [0;255].

## 2.3. Indexed Format

In this format each pixel is represented by an 8 bit index into a 256 entry ARGB palette. It is intended for Video Output Overlays only. There are no ioctls to access the palette, this must be done with ioctls of the Linux framebuffer API.

Table 2-3. Indexed Image Format

Identifier | Code |  | Byte 0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
|  | Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_PAL8` | 'PAL8' |  | i7 | i6 | i5 | i4 | i3 | i2 | i1 | i0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |

## 2.4. RGB Formats

# Packed RGB formats

## Name

Packed RGB formats -- Packed RGB formats

## Description

These formats are designed to match the pixel formats of typical PC graphics frame buffers. They occupy 8, 16, 24 or 32 bits per pixel. These are all packed-pixel formats, meaning all the data for a pixel lie next to each other in memory.

When one of these formats is used, drivers shall report the colorspace `V4L2_COLORSPACE_SRGB`.

Table 2-1. Packed RGB Image Formats

Identifier | Code |  | Byte 0 in memory |  | Byte 1 |  | Byte 2 |  | Byte 3
--- | --- | --- | --- | --- | --- | --- | --- | --- | ---
|  | Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
`V4L2_PIX_FMT_RGB332` | 'RGB1' |  | b1 | b0 | g2 | g1 | g0 | r2 | r1 | r0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB444` | 'R444' |  | g3 | g2 | g1 | g0 | b3 | b2 | b1 | b0 |  | a3 | a2 | a1 | a0 | r3 | r2 | r1 | r0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB555` | 'RGBO' |  | g2 | g1 | g0 | r4 | r3 | r2 | r1 | r0 |  | a | b4 | b3 | b2 | b1 | b0 | g4 | g3 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB565` | 'RGBP' |  | g2 | g1 | g0 | r4 | r3 | r2 | r1 | r0 |  | b4 | b3 | b2 | b1 | b0 | g5 | g4 | g3 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB555X` | 'RGBQ' |  | a | b4 | b3 | b2 | b1 | b0 | g4 | g3 |  | g2 | g1 | g0 | r4 | r3 | r2 | r1 | r0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB565X` | 'RGBR' |  | b4 | b3 | b2 | b1 | b0 | g5 | g4 | g3 |  | g2 | g1 | g0 | r4 | r3 | r2 | r1 | r0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_BGR24` | 'BGR3' |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB24` | 'RGB3' |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_BGR32` | 'BGR4' |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  | a7 | a6 | a5 | a4 | a3 | a2 | a1 | a0
`V4L2_PIX_FMT_RGB32` | 'RGB4' |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  | a7 | a6 | a5 | a4 | a3 | a2 | a1 | a0

Bit 7 is the most significant bit. The value of a = alpha bits is undefined when reading from the driver, ignored when writing to the driver, except when alpha blending has been negotiated for a Video Overlay or Video Output Overlay.

Example 2-1. `V4L2_PIX_FMT_BGR24` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | B00 | G00 | R00 | B01 | G01 | R01 | B02 | G02 | R02 | B03 | G03 | R03
start + 12: | B10 | G10 | R10 | B11 | G11 | R11 | B12 | G12 | R12 | B13 | G13 | R13
start + 24: | B20 | G20 | R20 | B21 | G21 | R21 | B22 | G22 | R22 | B23 | G23 | R23
start + 36: | B30 | G30 | R30 | B31 | G31 | R31 | B32 | G32 | R32 | B33 | G33 | R33

> Important: Drivers may interpret these formats differently.

Some RGB formats above are uncommon and were probably defined in error. Drivers may interpret them as in Table 2-2.

Table 2-2. Packed RGB Image Formats (corrected)

Identifier | Code |  | Byte 0 in memory |  | Byte 1 |  | Byte 2 |  | Byte 3
--- | --- | --- | --- | --- | --- | --- | --- | --- | ---
|  | Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
`V4L2_PIX_FMT_RGB332` | 'RGB1' |  | r2 | r1 | r0 | g2 | g1 | g0 | b1 | b0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB444` | 'R444' |  | g3 | g2 | g1 | g0 | b3 | b2 | b1 | b0 |  | a3 | a2 | a1 | a0 | r3 | r2 | r1 | r0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB555` | 'RGBO' |  | g2 | g1 | g0 | b4 | b3 | b2 | b1 | b0 |  | a | r4 | r3 | r2 | r1 | r0 | g4 | g3 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB565` | 'RGBP' |  | g2 | g1 | g0 | b4 | b3 | b2 | b1 | b0 |  | r4 | r3 | r2 | r1 | r0 | g5 | g4 | g3 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB555X` | 'RGBQ' |  | a | r4 | r3 | r2 | r1 | r0 | g4 | g3 |  | g2 | g1 | g0 | b4 | b3 | b2 | b1 | b0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB565X` | 'RGBR' |  | r4 | r3 | r2 | r1 | r0 | g5 | g4 | g3 |  | g2 | g1 | g0 | b4 | b3 | b2 | b1 | b0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_BGR24` | 'BGR3' |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_RGB24` | 'RGB3' |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_BGR32` | 'BGR4' |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  | a7 | a6 | a5 | a4 | a3 | a2 | a1 | a0
`V4L2_PIX_FMT_RGB32` | 'RGB4' |  | a7 | a6 | a5 | a4 | a3 | a2 | a1 | a0 |  | r7 | r6 | r5 | r4 | r3 | r2 | r1 | r0 |  | g7 | g6 | g5 | g4 | g3 | g2 | g1 | g0 |  | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0

A test utility to determine which RGB formats a driver actually supports is available from the LinuxTV v4l-dvb repository. See http://linuxtv.org/repo/ for access instructions.

# V4L2_PIX_FMT_SBGGR8 ('BA81')

## Name

`V4L2_PIX_FMT_SBGGR8` -- Bayer RGB format

## Description

This is commonly the native format of digital cameras, reflecting the arrangement of sensors on the CCD device. Only one red, green or blue value is given for each pixel. Missing components must be interpolated from neighbouring pixels. From left to right the first row consists of a blue and green value, the second row of a green and red value. This scheme repeats to the right and down for every two columns and rows.

Example 2-1. `V4L2_PIX_FMT_SBGGR8` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | B00 | G01 | B02 | G03
start + 4: | G10 | R11 | G12 | R13
start + 8: | B20 | G21 | B22 | G23
start + 12: | G30 | R31 | G32 | R33

# V4L2_PIX_FMT_SBGGR16 ('BA82')

## Name

`V4L2_PIX_FMT_SBGGR16` -- Bayer RGB format

## Description

This format is similar to `V4L2_PIX_FMT_SBGGR8`, except each pixel has a depth of 16 bits. The least significant byte is stored at lower memory addresses (little-endian). Note the actual sampling precision may be lower than 16 bits, for example 10 bits per pixel with values in range 0 to 1023.

Example 2-1. `V4L2_PIX_FMT_SBGGR16` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | B00low | B00high | G01low | G01high | B02low | B02high | G03low | G03high
start + 8: | G10low | G10high | R11low | R11high | G12low | G12high | R13low | R13high
start + 16: | B20low | B20high | G21low | G21high | B22low | B22high | G23low | G23high
start + 24: | G30low | G30high | R31low | R31high | G32low | G32high | R33low | R33high

## 2.5. YUV Formats

YUV is the format native to TV broadcast and composite video signals. It separates the brightness information (Y) from the color information (U and V or Cb and Cr). The color information consists of red and blue color difference signals, this way the green component can be reconstructed by subtracting from the brightness component. See Section 2.2 for conversion examples. YUV was chosen because early television would only transmit brightness information. To add color in a way compatible with existing receivers a new signal carrier was added to transmit the color difference signals. Secondary in the YUV format the U and V components usually have lower resolution than the Y component. This is an analog video compression technique taking advantage of a property of the human visual system, being more sensitive to brightness information.

# Packed YUV formats

## Name

Packed YUV formats -- Packed YUV formats

## Description

Similar to the packed RGB formats these formats store the Y, Cb and Cr component of each pixel in one 16 or 32 bit word.

Table 2-1. Packed YUV Image Formats

Identifier | Code |  | Byte 0 in memory |  | Byte 1 |  | Byte 2 |  | Byte 3
--- | --- | --- | --- | --- | --- | --- | --- | --- | ---
|  | Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |  | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
`V4L2_PIX_FMT_YUV444` | 'Y444' |  | Cb3 | Cb2 | Cb1 | Cb0 | Cr3 | Cr2 | Cr1 | Cr0 |  | a3 | a2 | a1 | a0 | Y'3 | Y'2 | Y'1 | Y'0 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_YUV555` | 'YUVO' |  | Cb2 | Cb1 | Cb0 | Cr4 | Cr3 | Cr2 | Cr1 | Cr0 |  | a | Y'4 | Y'3 | Y'2 | Y'1 | Y'0 | Cb4 | Cb3 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_YUV565` | 'YUVP' |  | Cb2 | Cb1 | Cb0 | Cr4 | Cr3 | Cr2 | Cr1 | Cr0 |  | Y'4 | Y'3 | Y'2 | Y'1 | Y'0 | Cb5 | Cb4 | Cb3 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
`V4L2_PIX_FMT_YUV32` | 'YUV4' |  | a7 | a6 | a5 | a4 | a3 | a2 | a1 | a0 |  | Y'7 | Y'6 | Y'5 | Y'4 | Y'3 | Y'2 | Y'1 | Y'0 |  | Cb7 | Cb6 | Cb5 | Cb4 | Cb3 | Cb2 | Cb1 | Cb0 |  | Cr7 | Cr6 | Cr5 | Cr4 | Cr3 | Cr2 | Cr1 | Cr0

Bit 7 is the most significant bit. The value of a = alpha bits is undefined when reading from the driver, ignored when writing to the driver, except when alpha blending has been negotiated for a Video Overlay or Video Output Overlay.

# V4L2_PIX_FMT_GREY ('GREY')

## Name

`V4L2_PIX_FMT_GREY` -- Grey-scale image

## Description

This is a grey-scale image. It is really a degenerate Y'CbCr format which simply contains no Cb or Cr data.

Example 2-1. `V4L2_PIX_FMT_GREY` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Y'01 | Y'02 | Y'03
start + 4: | Y'10 | Y'11 | Y'12 | Y'13
start + 8: | Y'20 | Y'21 | Y'22 | Y'23
start + 12: | Y'30 | Y'31 | Y'32 | Y'33

# V4L2_PIX_FMT_Y16 ('Y16 ')

## Name

`V4L2_PIX_FMT_Y16` -- Grey-scale image

## Description

This is a grey-scale image with a depth of 16 bits per pixel. The least significant byte is stored at lower memory addresses (little-endian). Note the actual sampling precision may be lower than 16 bits, for example 10 bits per pixel with values in range 0 to 1023.

Example 2-1. `V4L2_PIX_FMT_Y16` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00low | Y'00high | Y'01low | Y'01high | Y'02low | Y'02high | Y'03low | Y'03high
start + 8: | Y'10low | Y'10high | Y'11low | Y'11high | Y'12low | Y'12high | Y'13low | Y'13high
start + 16: | Y'20low | Y'20high | Y'21low | Y'21high | Y'22low | Y'22high | Y'23low | Y'23high
start + 24: | Y'30low | Y'30high | Y'31low | Y'31high | Y'32low | Y'32high | Y'33low | Y'33high

# V4L2_PIX_FMT_YUYV ('YUYV')

## Name

`V4L2_PIX_FMT_YUYV` -- Packed format with ½ horizontal chroma resolution, also known as YUV 4:2:2

## Description

In this format each four bytes is two pixels. Each four bytes is two Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr belong to both pixels. As you can see, the Cr and Cb components have half the horizontal resolution of the Y component. `V4L2_PIX_FMT_YUYV` is known in the Windows environment as YUY2.

Example 2-1. `V4L2_PIX_FMT_YUYV` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Cb00 | Y'01 | Cr00 | Y'02 | Cb01 | Y'03 | Cr01
start + 8: | Y'10 | Cb10 | Y'11 | Cr10 | Y'12 | Cb11 | Y'13 | Cr11
start + 16: | Y'20 | Cb20 | Y'21 | Cr20 | Y'22 | Cb21 | Y'23 | Cr21
start + 24: | Y'30 | Cb30 | Y'31 | Cr30 | Y'32 | Cb31 | Y'33 | Cr31

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y | C | Y |  | Y | C | Y
1 | Y | C | Y |  | Y | C | Y
2 | Y | C | Y |  | Y | C | Y
3 | Y | C | Y |  | Y | C | Y

# V4L2_PIX_FMT_UYVY ('UYVY')

## Name

`V4L2_PIX_FMT_UYVY` -- Variation of `V4L2_PIX_FMT_YUYV` with different order of samples in memory

## Description

In this format each four bytes is two pixels. Each four bytes is two Y's, a Cb and a Cr. Each Y goes to one of the pixels, and the Cb and Cr belong to both pixels. As you can see, the Cr and Cb components have half the horizontal resolution of the Y component.

Example 2-1. `V4L2_PIX_FMT_UYVY` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Cb00 | Y'00 | Cr00 | Y'01 | Cb01 | Y'02 | Cr01 | Y'03
start + 8: | Cb10 | Y'10 | Cr10 | Y'11 | Cb11 | Y'12 | Cr11 | Y'13
start + 16: | Cb20 | Y'20 | Cr20 | Y'21 | Cb21 | Y'22 | Cr21 | Y'23
start + 24: | Cb30 | Y'30 | Cr30 | Y'31 | Cb31 | Y'32 | Cr31 | Y'33

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y | C | Y |  | Y | C | Y
1 | Y | C | Y |  | Y | C | Y
2 | Y | C | Y |  | Y | C | Y
3 | Y | C | Y |  | Y | C | Y

# V4L2_PIX_FMT_Y41P ('Y41P')

## Name

`V4L2_PIX_FMT_Y41P` -- Format with ¼ horizontal chroma resolution, also known as YUV 4:1:1

## Description

In this format each 12 bytes is eight pixels. In the twelve bytes are two CbCr pairs and eight Y's. The first CbCr pair goes with the first four Y's, and the second CbCr pair goes with the other four Y's. The Cb and Cr components have one fourth the horizontal resolution of the Y component.

Do not confuse this format with `V4L2_PIX_FMT_YUV411P`. Y41P is derived from "YUV 4:1:1 packed", while YUV411P stands for "YUV 4:1:1 planar".

Example 2-1. `V4L2_PIX_FMT_Y41P` 8 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Cb00 | Y'00 | Cr00 | Y'01 | Cb01 | Y'02 | Cr01 | Y'03 | Y'04 | Y'05 | Y'06 | Y'07
start + 12: | Cb10 | Y'10 | Cr10 | Y'11 | Cb11 | Y'12 | Cr11 | Y'13 | Y'14 | Y'15 | Y'16 | Y'17
start + 24: | Cb20 | Y'20 | Cr20 | Y'21 | Cb21 | Y'22 | Cr21 | Y'23 | Y'24 | Y'25 | Y'26 | Y'27
start + 36: | Cb30 | Y'30 | Cr30 | Y'31 | Cb31 | Y'32 | Cr31 | Y'33 | Y'34 | Y'35 | Y'36 | Y'37

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3 |  | 4 |  | 5 |  | 6 |  | 7
0 | Y |  | Y | C | Y |  | Y |  | Y |  | Y | C | Y |  | Y
1 | Y |  | Y | C | Y |  | Y |  | Y |  | Y | C | Y |  | Y
2 | Y |  | Y | C | Y |  | Y |  | Y |  | Y | C | Y |  | Y
3 | Y |  | Y | C | Y |  | Y |  | Y |  | Y | C | Y |  | Y

# V4L2_PIX_FMT_YVU420 ('YV12'), V4L2_PIX_FMT_YUV420 ('YU12')

## Name

`V4L2_PIX_FMT_YVU420`, `V4L2_PIX_FMT_YUV420` -- Planar formats with ½ horizontal and vertical chroma resolution, also known as YUV 4:2:0

## Description

These are planar formats, as opposed to a packed format. The three components are separated into three sub- images or planes. The Y plane is first. The Y plane has one byte per pixel. For `V4L2_PIX_FMT_YVU420`, the Cr plane immediately follows the Y plane in memory. The Cr plane is half the width and half the height of the Y plane (and of the image). Each Cr belongs to four pixels, a two-by-two square of the image. For example, Cr0 belongs to Y'00, Y'01, Y'10, and Y'11. Following the Cr plane is the Cb plane, just like the Cr plane. `V4L2_PIX_FMT_YUV420` is the same except the Cb plane comes first, then the Cr plane.

If the Y plane has pad bytes after each row, then the Cr and Cb planes have half as many pad bytes after their rows. In other words, two Cx rows (including padding) is exactly as long as one Y row (including padding).

Example 2-1. `V4L2_PIX_FMT_YVU420` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Y'01 | Y'02 | Y'03
start + 4: | Y'10 | Y'11 | Y'12 | Y'13
start + 8: | Y'20 | Y'21 | Y'22 | Y'23
start + 12: | Y'30 | Y'31 | Y'32 | Y'33
start + 16: | Cr00 | Cr01 |  |
start + 18: | Cr10 | Cr11 |  |
start + 20: | Cb00 | Cb01 |  |
start + 22: | Cb10 | Cb11 |  |

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y |  | Y |  | Y |  | Y
|  | C |  |  |  | C |
1 | Y |  | Y |  | Y |  | Y
2 | Y |  | Y |  | Y |  | Y
|  | C |  |  |  | C |
3 | Y |  | Y |  | Y |  | Y

# V4L2_PIX_FMT_YVU410 ('YVU9'), V4L2_PIX_FMT_YUV410 ('YUV9')

## Name

`V4L2_PIX_FMT_YVU410`, `V4L2_PIX_FMT_YUV410` -- Planar formats with ¼ horizontal and vertical chroma resolution, also known as YUV 4:1:0

## Description

These are planar formats, as opposed to a packed format. The three components are separated into three sub-images or planes. The Y plane is first. The Y plane has one byte per pixel. For `V4L2_PIX_FMT_YVU410`, the Cr plane immediately follows the Y plane in memory. The Cr plane is ¼ the width and ¼ the height of the Y plane (and of the image). Each Cr belongs to 16 pixels, a four-by-four square of the image. Following the Cr plane is the Cb plane, just like the Cr plane. `V4L2_PIX_FMT_YUV410` is the same, except the Cb plane comes first, then the Cr plane.

If the Y plane has pad bytes after each row, then the Cr and Cb planes have ¼ as many pad bytes after their rows. In other words, four Cx rows (including padding) are exactly as long as one Y row (including padding).

Example 2-1. `V4L2_PIX_FMT_YVU410` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Y'01 | Y'02 | Y'03
start + 4: | Y'10 | Y'11 | Y'12 | Y'13
start + 8: | Y'20 | Y'21 | Y'22 | Y'23
start + 12: | Y'30 | Y'31 | Y'32 | Y'33
start + 16: | Cr00 |  |  |
start + 17: | Cb00 |  |  |

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y |  | Y |  | Y |  | Y
1 | Y |  | Y |  | Y |  | Y
|  |  |  | C |  |  |
2 | Y |  | Y |  | Y |  | Y
3 | Y |  | Y |  | Y |  | Y

# V4L2_PIX_FMT_YUV422P ('422P')

## Name

`V4L2_PIX_FMT_YUV422P` -- Format with ½ horizontal chroma resolution, also known as YUV 4:2:2. Planar layout as opposed to `V4L2_PIX_FMT_YUYV`

## Description

This format is not commonly used. This is a planar version of the YUYV format. The three components are separated into three sub-images or planes. The Y plane is first. The Y plane has one byte per pixel. The Cb plane immediately follows the Y plane in memory. The Cb plane is half the width of the Y plane (and of the image). Each Cb belongs to two pixels. For example, Cb0 belongs to Y'00, Y'01. Following the Cb plane is the Cr plane, just like the Cb plane.

If the Y plane has pad bytes after each row, then the Cr and Cb planes have half as many pad bytes after their rows. In other words, two Cx rows (including padding) is exactly as long as one Y row (including padding).

Example 2-1. `V4L2_PIX_FMT_YUV422P` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Y'01 | Y'02 | Y'03
start + 4: | Y'10 | Y'11 | Y'12 | Y'13
start + 8: | Y'20 | Y'21 | Y'22 | Y'23
start + 12: | Y'30 | Y'31 | Y'32 | Y'33
start + 16: | Cb00 | Cb01 |  |
start + 18: | Cb10 | Cb11 |  |
start + 20: | Cb20 | Cb21 |  |
start + 22: | Cb30 | Cb31 |  |
start + 24: | Cr00 | Cr01 |  |
start + 26: | Cr10 | Cr11 |  |
start + 28: | Cr20 | Cr21 |  |
start + 30: | Cr30 | Cr31 |  |

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y | C | Y |  | Y | C | Y
1 | Y | C | Y |  | Y | C | Y
2 | Y | C | Y |  | Y | C | Y
3 | Y | C | Y |  | Y | C | Y

# V4L2_PIX_FMT_YUV411P ('411P')

## Name

`V4L2_PIX_FMT_YUV411P` -- Format with ¼ horizontal chroma resolution, also known as YUV 4:1:1. Planar layout as opposed to `V4L2_PIX_FMT_Y41P`

## Description

This format is not commonly used. This is a planar format similar to the 4:2:2 planar format except with half as many chroma. The three components are separated into three sub-images or planes. The Y plane is first. The Y plane has one byte per pixel. The Cb plane immediately follows the Y plane in memory. The Cb plane is ¼ the width of the Y plane (and of the image). Each Cb belongs to 4 pixels all on the same row. For example, Cb0 belongs to Y'00, Y'01, Y'02 and Y'03. Following the Cb plane is the Cr plane, just like the Cb plane.

If the Y plane has pad bytes after each row, then the Cr and Cb planes have ¼ as many pad bytes after their rows. In other words, four C x rows (including padding) is exactly as long as one Y row (including padding).

Example 2-1. `V4L2_PIX_FMT_YUV411P` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Y'01 | Y'02 | Y'03
start + 4: | Y'10 | Y'11 | Y'12 | Y'13
start + 8: | Y'20 | Y'21 | Y'22 | Y'23
start + 12: | Y'30 | Y'31 | Y'32 | Y'33
start + 16: | Cb00 |  |  |
start + 17: | Cb10 |  |  |
start + 18: | Cb20 |  |  |
start + 19: | Cb30 |  |  |
start + 20: | Cr00 |  |  |
start + 21: | Cr10 |  |  |
start + 22: | Cr20 |  |  |
start + 23: | Cr30 |  |  |

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y |  | Y | C | Y |  | Y
1 | Y |  | Y | C | Y |  | Y
2 | Y |  | Y | C | Y |  | Y
3 | Y |  | Y | C | Y |  | Y

# V4L2_PIX_FMT_NV12 ('NV12'), V4L2_PIX_FMT_NV21 ('NV21')

## Name

`V4L2_PIX_FMT_NV12`, `V4L2_PIX_FMT_NV21` -- Formats with ½ horizontal and vertical chroma resolution, also known as YUV 4:2:0. One luminance and one chrominance plane with alternating chroma samples as opposed to `V4L2_PIX_FMT_YVU420`

## Description

These are two-plane versions of the YUV 4:2:0 format. The three components are separated into two sub-images or planes. The Y plane is first. The Y plane has one byte per pixel. For `V4L2_PIX_FMT_NV12`, a combined CbCr plane immediately follows the Y plane in memory. The CbCr plane is the same width, in bytes, as the Y plane (and of the image), but is half as tall in pixels. Each CbCr pair belongs to four pixels. For example, Cb0/Cr0 belongs to Y'00, Y'01, Y'10, Y'11. `V4L2_PIX_FMT_NV21` is the same except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte.

If the Y plane has pad bytes after each row, then the CbCr plane has as many pad bytes after its rows.

Example 2-1. `V4L2_PIX_FMT_NV12` 4 × 4 pixel image

Byte Order. Each cell is one byte.

start + 0: | Y'00 | Y'01 | Y'02 | Y'03
start + 4: | Y'10 | Y'11 | Y'12 | Y'13
start + 8: | Y'20 | Y'21 | Y'22 | Y'23
start + 12: | Y'30 | Y'31 | Y'32 | Y'33
start + 16: | Cb00 | Cr00 | Cb01 | Cr01
start + 20: | Cb10 | Cr10 | Cb11 | Cr11

Color Sample Location.

| 0 |  | 1 |  | 2 |  | 3
0 | Y |  | Y |  | Y |  | Y
|  | C |  |  |  | C |
1 | Y |  | Y |  | Y |  | Y
2 | Y |  | Y |  | Y |  | Y
|  | C |  |  |  | C |
3 | Y |  | Y |  | Y |  | Y

## 2.6. Compressed Formats

Table 2-7. Compressed Image Formats

Identifier | Code | Details
--- | --- | ---
`V4L2_PIX_FMT_JPEG` | 'JPEG' | TBD. See also `VIDIOC_G_JPEGCOMP`, `VIDIOC_S_JPEGCOMP`.
`V4L2_PIX_FMT_MPEG` | 'MPEG' | MPEG stream. The actual format is determined by extended control `V4L2_CID_MPEG_STREAM_TYPE`, see Table 1-2.

## 2.7. Reserved Format Identifiers

These formats are not defined by this specification, they are just listed for reference and to avoid naming conflicts. If you want to register your own format, send an e-mail to the V4L mailing list https://listman.redhat.com/mailman/listinfo/video4linux-list for inclusion in the `videodev.h` file. If you want to share your format with other developers add a link to your documentation and send a copy to the maintainer of this document, Michael Schimek `<mschimek@gmx.at>`, for inclusion in this section. If you think your format should be listed in a standard format section please make a proposal on the V4L mailing list.

Table 2-8. Reserved Image Formats

Identifier | Code | Details
--- | --- | ---
`V4L2_PIX_FMT_DV` | 'dvsd' | unknown
`V4L2_PIX_FMT_ET61X251` | 'E625' | Compressed format of the ET61X251 driver.
`V4L2_PIX_FMT_HI240` | 'HI24' | 8 bit RGB format used by the BTTV driver, http://bytesex.org/bttv/
`V4L2_PIX_FMT_HM12` | 'HM12' | YUV 4:2:0 format used by the IVTV driver, http://www.ivtvdriver.org/ The format is documented in the kernel sources in the file `Documentation/video4linux/cx2341x/README.hm12`
`V4L2_PIX_FMT_MJPEG` | 'MJPG' | Compressed format used by the Zoran driver
`V4L2_PIX_FMT_PWC1` | 'PWC1' | Compressed format of the PWC driver.
`V4L2_PIX_FMT_PWC2` | 'PWC2' | Compressed format of the PWC driver.
`V4L2_PIX_FMT_SN9C10X` | 'S910' | Compressed format of the SN9C102 driver.
`V4L2_PIX_FMT_WNVA` | 'WNVA' | Used by the Winnov Videum driver, http://www.thedirks.org/winnov/
`V4L2_PIX_FMT_YYUV` | 'YYUV' | unknown

# Chapter 3. Input/Output

The V4L2 API defines several different methods to read from or write to a device. All drivers exchanging data with applications must support at least one of them.

The classic I/O method using the `read()` and `write()` function is automatically selected after opening a V4L2 device. When the driver does not support this method attempts to read or write will fail at any time.

Other methods must be negotiated. To select the streaming I/O method with memory mapped or user buffers applications call the `VIDIOC_REQBUFS` ioctl. The asynchronous I/O method is not defined yet.

Video overlay can be considered another I/O method, although the application does not directly receive the image data. It is selected by initiating video overlay with the `VIDIOC_S_FMT` ioctl. For more information see Section 4.2.

Generally exactly one I/O method, including overlay, is associated with each file descriptor. The only exceptions are applications not exchanging data with a driver ("panel applications", see Section 1.1) and drivers permitting simultaneous video capturing and overlay using the same file descriptor, for compatibility with V4L and earlier versions of V4L2.

`VIDIOC_S_FMT` and `VIDIOC_REQBUFS` would permit this to some degree, but for simplicity drivers need not support switching the I/O method (after first switching away from read/write) other than by closing and reopening the device.

The following sections describe the various I/O methods in more detail.

## 3.1. Read/Write

Input and output devices support the `read()` and `write()` function, respectively, when the `V4L2_CAP_READWRITE` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl is set.

Drivers may need the CPU to copy the data, but they may also support DMA to or from user memory, so this I/O method is not necessarily less efficient than other methods merely exchanging buffer pointers. It is considered inferior though because no meta-information like frame counters or timestamps are passed. This information is necessary to recognize frame dropping and to synchronize with other data streams. However this is also the simplest I/O method, requiring little or no setup to exchange data. It permits command line stunts like this (the vidctrl tool is fictitious):

    > vidctrl /dev/video --input=0 --format=YUYV --size=352x288
    > dd if=/dev/video of=myimage.422 bs=202752 count=1

To read from the device applications use the `read()` function, to write the `write()` function. Drivers must implement one I/O method if they exchange data with applications, but it need not be this.[12] When reading or writing is supported, the driver must also support the `select()` and `poll()` function.[13]

## 3.2. Streaming I/O (Memory Mapping)

Input and output devices support this I/O method when the `V4L2_CAP_STREAMING` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl is set. There are two streaming methods, to determine if the memory mapping flavor is supported applications must call the `VIDIOC_REQBUFS` ioctl.

Streaming is an I/O method where only pointers to buffers are exchanged between application and driver, the data itself is not copied. Memory mapping is primarily intended to map buffers in device memory into the application's address space. Device memory can be for example the video memory on a graphics card with a video capture add-on. However, being the most efficient I/O method available for a long time, many other drivers support streaming as well, allocating buffers in DMA-able main memory.

A driver can support many sets of buffers. Each set is identified by a unique buffer type value. The sets are independent and each set can hold a different type of data. To access different sets at the same time different file descriptors must be used.[14]

To allocate device buffers applications call the `VIDIOC_REQBUFS` ioctl with the desired number of buffers and buffer type, for example `V4L2_BUF_TYPE_VIDEO_CAPTURE`. This ioctl can also be used to change the number of buffers or to free the allocated memory, provided none of the buffers are still mapped.

Before applications can access the buffers they must map them into their address space with the `mmap()` function. The location of the buffers in device memory can be determined with the `VIDIOC_QUERYBUF` ioctl. The `m.offset` and `length` returned in a struct v4l2_buffer are passed as sixth and second parameter to the `mmap()` function. The offset and length values must not be modified. Remember the buffers are allocated in physical memory, as opposed to virtual memory which can be swapped out to disk. Applications should free the buffers as soon as possible with the `munmap()` function.

Example 3-1. Mapping buffers

    struct v4l2_requestbuffers reqbuf;
    struct {
            void *start;
            size_t length;
    } *buffers;
    unsigned int i;

    memset (&reqbuf, 0, sizeof (reqbuf));
    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
    reqbuf.memory = V4L2_MEMORY_MMAP;
    reqbuf.count = 20;

    if (-1 == ioctl (fd, VIDIOC_REQBUFS, &reqbuf)) {
            if (errno == EINVAL)
                    printf ("Video capturing or mmap-streaming is not supported\n");
            else
                    perror ("VIDIOC_REQBUFS");

            exit (EXIT_FAILURE);
    }

    /* We want at least five buffers. */

    if (reqbuf.count < 5) {
            /* You may need to free the buffers here. */
            printf ("Not enough buffer memory\n");
            exit (EXIT_FAILURE);
    }

    buffers = calloc (reqbuf.count, sizeof (*buffers));
    assert (buffers != NULL);

    for (i = 0; i < reqbuf.count; i++) {
            struct v4l2_buffer buffer;

            memset (&buffer, 0, sizeof (buffer));
            buffer.type = reqbuf.type;
    	buffer.memory = V4L2_MEMORY_MMAP;
            buffer.index = i;

            if (-1 == ioctl (fd, VIDIOC_QUERYBUF, &buffer)) {
                    perror ("VIDIOC_QUERYBUF");
                    exit (EXIT_FAILURE);
            }

            buffers[i].length = buffer.length; /* remember for munmap() */

            buffers[i].start = mmap (NULL, buffer.length,
                                     PROT_READ | PROT_WRITE, /* recommended */
                                     MAP_SHARED,             /* recommended */
                                     fd, buffer.m.offset);

            if (MAP_FAILED == buffers[i].start) {
                    /* If you do not exit here you should unmap() and free()
                       the buffers mapped so far. */
                    perror ("mmap");
                    exit (EXIT_FAILURE);
            }
    }

    /* Cleanup. */

    for (i = 0; i < reqbuf.count; i++)
            munmap (buffers[i].start, buffers[i].length);

Conceptually streaming drivers maintain two buffer queues, an incoming and an outgoing queue. They separate the synchronous capture or output operation locked to a video clock from the application which is subject to random disk or network delays and preemption by other processes, thereby reducing the probability of data loss. The queues are organized as FIFOs, buffers will be output in the order enqueued in the incoming FIFO, and were captured in the order dequeued from the outgoing FIFO.

The driver may require a minimum number of buffers enqueued at all times to function, apart of this no limit exists on the number of buffers applications can enqueue in advance, or dequeue and process. They can also enqueue in a different order than buffers have been dequeued, and the driver can fill enqueued empty buffers in any order. [15] The index number of a buffer (struct v4l2_buffer `index`) plays no role here, it only identifies the buffer.

Initially all mapped buffers are in dequeued state, inaccessible by the driver. For capturing applications it is customary to first enqueue all mapped buffers, then to start capturing and enter the read loop. Here the application waits until a filled buffer can be dequeued, and re-enqueues the buffer when the data is no longer needed. Output applications fill and enqueue buffers, when enough buffers are stacked up the output is started with `VIDIOC_STREAMON`. In the write loop, when the application runs out of free buffers, it must wait until an empty buffer can be dequeued and reused.

To enqueue and dequeue a buffer applications use the `VIDIOC_QBUF` and `VIDIOC_DQBUF` ioctl. The status of a buffer being mapped, enqueued, full or empty can be determined at any time using the `VIDIOC_QUERYBUF` ioctl. Two methods exist to suspend execution of the application until one or more buffers can be dequeued. By default `VIDIOC_DQBUF` blocks when no buffer is in the outgoing queue. When the `O_NONBLOCK` flag was given to the `open()` function, `VIDIOC_DQBUF` returns immediately with an EAGAIN error code when no buffer is available. The `select()` or `poll()` function are always available.

To start and stop capturing or output applications call the `VIDIOC_STREAMON` and `VIDIOC_STREAMOFF` ioctl. Note `VIDIOC_STREAMOFF` removes all buffers from both queues as a side effect. Since there is no notion of doing anything "now" on a multitasking system, if an application needs to synchronize with another event it should examine the struct v4l2_buffer `timestamp` of captured buffers, or set the field before enqueuing buffers for output.

Drivers implementing memory mapping I/O must support the `VIDIOC_REQBUFS`, `VIDIOC_QUERYBUF`, `VIDIOC_QBUF`, `VIDIOC_DQBUF`, `VIDIOC_STREAMON` and `VIDIOC_STREAMOFF` ioctl, the `mmap()`, `munmap()`, `select()` and `poll()` function.[16]

[capture example]

## 3.3. Streaming I/O (User Pointers)

Input and output devices support this I/O method when the `V4L2_CAP_STREAMING` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl is set. If the particular user pointer method (not only memory mapping) is supported must be determined by calling the `VIDIOC_REQBUFS` ioctl.

This I/O method combines advantages of the read/write and memory mapping methods. Buffers are allocated by the application itself, and can reside for example in virtual or shared memory. Only pointers to data are exchanged, these pointers and meta-information are passed in struct v4l2_buffer. The driver must be switched into user pointer I/O mode by calling the `VIDIOC_REQBUFS` with the desired buffer type. No buffers are allocated beforehands, consequently they are not indexed and cannot be queried like mapped buffers with the `VIDIOC_QUERYBUF` ioctl.

Example 3-2. Initiating streaming I/O with user pointers

    struct v4l2_requestbuffers reqbuf;

    memset (&reqbuf, 0, sizeof (reqbuf));
    reqbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
    reqbuf.memory = V4L2_MEMORY_USERPTR;

    if (ioctl (fd, VIDIOC_REQBUFS, &reqbuf) == -1) {
            if (errno == EINVAL)
                    printf ("Video capturing or user pointer streaming is not supported\n");
            else
                    perror ("VIDIOC_REQBUFS");

            exit (EXIT_FAILURE);
    }

Buffer addresses and sizes are passed on the fly with the `VIDIOC_QBUF` ioctl. Although buffers are commonly cycled, applications can pass different addresses and sizes at each `VIDIOC_QBUF` call. If required by the hardware the driver swaps memory pages within physical memory to create a continuous area of memory. This happens transparently to the application in the virtual memory subsystem of the kernel. When buffer pages have been swapped out to disk they are brought back and finally locked in physical memory for DMA.[17]

Filled or displayed buffers are dequeued with the `VIDIOC_DQBUF` ioctl. The driver can unlock the memory pages at any time between the completion of the DMA and this ioctl. The memory is also unlocked when `VIDIOC_STREAMOFF` is called, `VIDIOC_REQBUFS`, or when the device is closed. Applications must take care not to free buffers without dequeuing. For once, the buffers remain locked until further, wasting physical memory. Second the driver will not be notified when the memory is returned to the application's free list and subsequently reused for other purposes, possibly completing the requested DMA and overwriting valuable data.

For capturing applications it is customary to enqueue a number of empty buffers, to start capturing and enter the read loop. Here the application waits until a filled buffer can be dequeued, and re-enqueues the buffer when the data is no longer needed. Output applications fill and enqueue buffers, when enough buffers are stacked up output is started. In the write loop, when the application runs out of free buffers it must wait until an empty buffer can be dequeued and reused. Two methods exist to suspend execution of the application until one or more buffers can be dequeued. By default `VIDIOC_DQBUF` blocks when no buffer is in the outgoing queue. When the `O_NONBLOCK` flag was given to the `open()` function, `VIDIOC_DQBUF` returns immediately with an EAGAIN error code when no buffer is available. The `select()` or `poll()` function are always available.

To start and stop capturing or output applications call the `VIDIOC_STREAMON` and `VIDIOC_STREAMOFF` ioctl. Note `VIDIOC_STREAMOFF` removes all buffers from both queues and unlocks all buffers as a side effect. Since there is no notion of doing anything "now" on a multitasking system, if an application needs to synchronize with another event it should examine the struct v4l2_buffer `timestamp` of captured buffers, or set the field before enqueuing buffers for output.

Drivers implementing user pointer I/O must support the `VIDIOC_REQBUFS`, `VIDIOC_QBUF`, `VIDIOC_DQBUF`, `VIDIOC_STREAMON` and `VIDIOC_STREAMOFF` ioctl, the `select()` and `poll()` function.[18]

## 3.4. Asynchronous I/O

This method is not defined yet.

## 3.5. Buffers

A buffer contains data exchanged by application and driver using one of the Streaming I/O methods. Only pointers to buffers are exchanged, the data itself is not copied. These pointers, together with meta-information like timestamps or field parity, are stored in a struct `v4l2_buffer`, argument to the `VIDIOC_QUERYBUF`, `VIDIOC_QBUF` and `VIDIOC_DQBUF` ioctl.

Nominally timestamps refer to the first data byte transmitted. In practice however the wide range of hardware covered by the V4L2 API limits timestamp accuracy. Often an interrupt routine will sample the system clock shortly after the field or frame was stored completely in memory. So applications must expect a constant difference up to one field or frame period plus a small (few scan lines) random error. The delay and error can be much larger due to compression or transmission over an external bus when the frames are not properly stamped by the sender. This is frequently the case with USB cameras. Here timestamps refer to the instant the field or frame was received by the driver, not the capture time. These devices identify by not enumerating any video standards, see Section 1.7.

Similar limitations apply to output timestamps. Typically the video hardware locks to a clock controlling the video timing, the horizontal and vertical synchronization pulses. At some point in the line sequence, possibly the vertical blanking, an interrupt routine samples the system clock, compares against the timestamp and programs the hardware to repeat the previous field or frame, or to display the buffer contents.

Apart of limitations of the video device and natural inaccuracies of all clocks, it should be noted system time itself is not perfectly stable. It can be affected by power saving cycles, warped to insert leap seconds, or even turned back or forth by the system administrator affecting long term measurements. [19]

Table 3-1. struct `v4l2_buffer`

__u32 | `index` |  | Number of the buffer, set by the application. This field is only used for memory mapping I/O and can range from zero to the number of buffers allocated with the `VIDIOC_REQBUFS` ioctl (struct v4l2_requestbuffers `count`) minus one.
enum v4l2_buf_type | `type` |  | Type of the buffer, same as struct v4l2_format `type` or struct v4l2_requestbuffers `type`, set by the application.
__u32 | `bytesused` |  | The number of bytes occupied by the data in the buffer. It depends on the negotiated data format and may change with each buffer for compressed variable size data like JPEG images. Drivers must set this field when `type` refers to an input stream, applications when an output stream.
__u32 | `flags` |  | Flags set by the application or driver, see Table 3-3.
enum v4l2_field | `field` |  | Indicates the field order of the image in the buffer, see Table 3-8. This field is not used when the buffer contains VBI data. Drivers must set it when `type` refers to an input stream, applications when an output stream.
struct timeval | `timestamp` |  | For input streams this is the system time (as returned by the `gettimeofday()` function) when the first data byte was captured. For output streams the data will not be displayed before this time, secondary to the nominal frame rate determined by the current video standard in enqueued order. Applications can for example zero this field to display frames as soon as possible. The driver stores the time at which the first data byte was actually sent out in the `timestamp` field. This permits applications to monitor the drift between the video and system clock.
struct v4l2_timecode | `timecode` |  | When `type` is `V4L2_BUF_TYPE_VIDEO_CAPTURE` and the `V4L2_BUF_FLAG_TIMECODE` flag is set in `flags`, this structure contains a frame timecode. In V4L2_FIELD_ALTERNATE mode the top and bottom field contain the same timecode. Timecodes are intended to help video editing and are typically recorded on video tapes, but also embedded in compressed formats like MPEG. This field is independent of the `timestamp` and `sequence` fields.
__u32 | `sequence` |  | Set by the driver, counting the frames in the sequence.
In V4L2_FIELD_ALTERNATE mode the top and bottom field have the same sequence number. The count starts at zero and includes dropped or repeated frames. A dropped frame was received by an input device but could not be stored due to lack of free buffer space. A repeated frame was displayed again by an output device because the application did not pass new data in time. Note this may count the frames received e.g. over USB, without taking into account the frames dropped by the remote hardware due to limited compression throughput or bus bandwidth. These devices identify by not enumerating any video standards, see Section 1.7.
enum v4l2_memory | `memory` |  | This field must be set by applications and/or drivers in accordance with the selected I/O method.
union | `m` |  |
| __u32 | `offset` | When `memory` is `V4L2_MEMORY_MMAP` this is the offset of the buffer from the start of the device memory. The value is returned by the driver and apart of serving as parameter to the `mmap()` function not useful for applications. See Section 3.2 for details.
| unsigned long | `userptr` | When `memory` is `V4L2_MEMORY_USERPTR` this is a pointer to the buffer (casted to unsigned long type) in virtual memory, set by the application. See Section 3.3 for details.
__u32 | `length` |  | Size of the buffer (not the payload) in bytes.
__u32 | `input` |  | Some video capture drivers support rapid and synchronous video input changes, a function useful for example in video surveillance applications. For this purpose applications set the `V4L2_BUF_FLAG_INPUT` flag, and this field to the number of a video input as in struct v4l2_input field `index`.
__u32 | `reserved` |  | A place holder for future extensions and custom (driver defined) buffer types `V4L2_BUF_TYPE_PRIVATE` and higher.

Table 3-2. enum v4l2_buf_type

`V4L2_BUF_TYPE_VIDEO_CAPTURE` | 1 | Buffer of a video capture stream, see Section 4.1.
`V4L2_BUF_TYPE_VIDEO_OUTPUT` | 2 | Buffer of a video output stream, see Section 4.3.
`V4L2_BUF_TYPE_VIDEO_OVERLAY` | 3 | Buffer for video overlay, see Section 4.2.
`V4L2_BUF_TYPE_VBI_CAPTURE` | 4 | Buffer of a raw VBI capture stream, see Section 4.7.
`V4L2_BUF_TYPE_VBI_OUTPUT` | 5 | Buffer of a raw VBI output stream, see Section 4.7.
`V4L2_BUF_TYPE_SLICED_VBI_CAPTURE` | 6 | Buffer of a sliced VBI capture stream, see Section 4.8.
`V4L2_BUF_TYPE_SLICED_VBI_OUTPUT` | 7 | Buffer of a sliced VBI output stream, see Section 4.8.
`V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY` | 8 | Buffer for video output overlay (OSD), see Section 4.4. Status: Experimental.
`V4L2_BUF_TYPE_PRIVATE` | 0x80 | This and higher values are reserved for custom (driver defined) buffer types.

Table 3-3. Buffer Flags

`V4L2_BUF_FLAG_MAPPED` | 0x0001 | The buffer resides in device memory and has been mapped into the application's address space, see Section 3.2 for details. Drivers set or clear this flag when the VIDIOC_QUERYBUF, VIDIOC_QBUF or VIDIOC_DQBUF ioctl is called. Set by the driver.
`V4L2_BUF_FLAG_QUEUED` | 0x0002 | Internally drivers maintain two buffer queues, an incoming and outgoing queue. When this flag is set, the buffer is currently on the incoming queue. It automatically moves to the outgoing queue after the buffer has been filled (capture devices) or displayed (output devices). Drivers set or clear this flag when the `VIDIOC_QUERYBUF` ioctl is called. After (successful) calling the `VIDIOC_QBUF` ioctl it is always set and after `VIDIOC_DQBUF` always cleared.
`V4L2_BUF_FLAG_DONE` | 0x0004 | When this flag is set, the buffer is currently on the outgoing queue, ready to be dequeued from the driver. Drivers set or clear this flag when the `VIDIOC_QUERYBUF` ioctl is called. After calling the `VIDIOC_QBUF` or `VIDIOC_DQBUF` it is always cleared. Of course a buffer cannot be on both queues at the same time, the `V4L2_BUF_FLAG_QUEUED` and `V4L2_BUF_FLAG_DONE` flag are mutually exclusive. They can be both cleared however, then the buffer is in "dequeued" state, in the application domain to say so.
`V4L2_BUF_FLAG_KEYFRAME` | 0x0008 | Drivers set or clear this flag when calling the `VIDIOC_DQBUF` ioctl. It may be set by video capture devices when the buffer contains a compressed image which is a key frame (or field), i. e. can be decompressed on its own.
`V4L2_BUF_FLAG_PFRAME` | 0x0010 | Similar to `V4L2_BUF_FLAG_KEYFRAME` this flags predicted frames or fields which contain only differences to a previous key frame.
`V4L2_BUF_FLAG_BFRAME` | 0x0020 | Similar to `V4L2_BUF_FLAG_PFRAME` this is a bidirectional predicted frame or field. [ooc tbd]
`V4L2_BUF_FLAG_TIMECODE` | 0x0100 | The `timecode` field is valid. Drivers set or clear this flag when the `VIDIOC_DQBUF` ioctl is called.
`V4L2_BUF_FLAG_INPUT` | 0x0200 | The `input` field is valid. Applications set or clear this flag before calling the `VIDIOC_QBUF` ioctl.

Table 3-4. enum v4l2_memory

`V4L2_MEMORY_MMAP` | 1 | The buffer is used for memory mapping I/O.
`V4L2_MEMORY_USERPTR` | 2 | The buffer is used for user pointer I/O.
`V4L2_MEMORY_OVERLAY` | 3 | [to do]

### 3.5.1. Timecodes

The `v4l2_timecode` structure is designed to hold a SMPTE 12M or similar timecode. (struct `timeval` timestamps are stored in struct v4l2_buffer field `timestamp`.)

Table 3-5. struct `v4l2_timecode`

__u32 | `type` | Frame rate the timecodes are based on, see Table 3-6.
__u32 | `flags` | Timecode flags, see Table 3-7.
__u8 | `frames` | Frame count, 0 ... 23/24/29/49/59, depending on the type of timecode.
__u8 | `seconds` | Seconds count, 0 ... 59. This is a binary, not BCD number.
__u8 | `minutes` | Minutes count, 0 ... 59. This is a binary, not BCD number.
__u8 | `hours` | Hours count, 0 ... 29. This is a binary, not BCD number.
__u8 | `userbits`[4] | The "user group" bits from the timecode.

Table 3-6. Timecode Types

`V4L2_TC_TYPE_24FPS` | 1 | 24 frames per second, i. e. film.
`V4L2_TC_TYPE_25FPS` | 2 | 25 frames per second, i. e. PAL or SECAM video.
`V4L2_TC_TYPE_30FPS` | 3 | 30 frames per second, i. e. NTSC video.
`V4L2_TC_TYPE_50FPS` | 4 |
`V4L2_TC_TYPE_60FPS` | 5 |

Table 3-7. Timecode Flags

`V4L2_TC_FLAG_DROPFRAME` | 0x0001 | Indicates "drop frame" semantics for counting frames in 29.97 fps material. When set, frame numbers 0 and 1 at the start of each minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the count.
`V4L2_TC_FLAG_COLORFRAME` | 0x0002 | The "color frame" flag.
`V4L2_TC_USERBITS_field` | 0x000C | Field mask for the "binary group flags".
`V4L2_TC_USERBITS_USERDEFINED` | 0x0000 | Unspecified format.
`V4L2_TC_USERBITS_8BITCHARS` | 0x0008 | 8-bit ISO characters.

## 3.6. Field Order

We have to distinguish between progressive and interlaced video. Progressive video transmits all lines of a video image sequentially. Interlaced video divides an image into two fields, containing only the odd and even lines of the image, respectively. Alternating the so called odd and even field are transmitted, and due to a small delay between fields a cathode ray TV displays the lines interleaved, yielding the original frame. This curious technique was invented because at refresh rates similar to film the image would fade out too quickly. Transmitting fields reduces the flicker without the necessity of doubling the frame rate and with it the bandwidth required for each channel.

It is important to understand a video camera does not expose one frame at a time, merely transmitting the frames separated into fields. The fields are in fact captured at two different instances in time. An object on screen may well move between one field and the next. For applications analysing motion it is of paramount importance to recognize which field of a frame is older, the temporal order.

When the driver provides or accepts images field by field rather than interleaved, it is also important applications understand how the fields combine to frames. We distinguish between top and bottom fields, the spatial order: The first line of the top field is the first line of an interlaced frame, the first line of the bottom field is the second line of that frame.

However because fields were captured one after the other, arguing whether a frame commences with the top or bottom field is pointless. Any two successive top and bottom, or bottom and top fields yield a valid frame. Only when the source was progressive to begin with, e. g. when transferring film to video, two fields may come from the same frame, creating a natural order.

Counter to intuition the top field is not necessarily the older field. Whether the older field contains the top or bottom lines is a convention determined by the video standard. Hence the distinction between temporal and spatial order of fields. The diagrams below should make this clearer.

All video capture and output devices must report the current field order. Some drivers may permit the selection of a different order, to this end applications initialize the `field` field of struct v4l2_pix_format before calling the `VIDIOC_S_FMT` ioctl. If this is not desired it should have the value `V4L2_FIELD_ANY` (0).

Table 3-8. enum v4l2_field

`V4L2_FIELD_ANY` | 0 | Applications request this field order when any one of the `V4L2_FIELD_NONE`, `V4L2_FIELD_TOP`, `V4L2_FIELD_BOTTOM`, or `V4L2_FIELD_INTERLACED` formats is acceptable. Drivers choose depending on hardware capabilities or e. g. the requested image size, and return the actual field order. struct v4l2_buffer `field` can never be `V4L2_FIELD_ANY`.
`V4L2_FIELD_NONE` | 1 | Images are in progressive format, not interlaced. The driver may also indicate this order when it cannot distinguish between `V4L2_FIELD_TOP` and `V4L2_FIELD_BOTTOM`.
`V4L2_FIELD_TOP` | 2 | Images consist of the top field only.
`V4L2_FIELD_BOTTOM` | 3 | Images consist of the bottom field only. Applications may wish to prevent a device from capturing interlaced images because they will have "comb" or "feathering" artefacts around moving objects.
`V4L2_FIELD_INTERLACED` | 4 | Images contain both fields, interleaved line by line. The temporal order of the fields (whether the top or bottom field is first transmitted) depends on the current video standard. M/NTSC transmits the bottom field first, all other standards the top field first.
`V4L2_FIELD_SEQ_TB` | 5 | Images contain both fields, the top field lines are stored first in memory, immediately followed by the bottom field lines. Fields are always stored in temporal order, the older one first in memory. Image sizes refer to the frame, not fields.
`V4L2_FIELD_SEQ_BT` | 6 | Images contain both fields, the bottom field lines are stored first in memory, immediately followed by the top field lines. Fields are always stored in temporal order, the older one first in memory. Image sizes refer to the frame, not fields.
`V4L2_FIELD_ALTERNATE` | 7 | The two fields of a frame are passed in separate buffers, in temporal order, i. e. the older one first. To indicate the field parity (whether the current field is a top or bottom field) the driver or application, depending on data direction, must set struct v4l2_buffer `field` to `V4L2_FIELD_TOP` or `V4L2_FIELD_BOTTOM`. Any two successive fields pair to build a frame. If fields are successive, without any dropped fields between them (fields can drop individually), can be determined from the struct v4l2_buffer `sequence` field. Image sizes refer to the frame, not fields. This format cannot be selected when using the read/write I/O method.
`V4L2_FIELD_INTERLACED_TB` | 8 | Images contain both fields, interleaved line by line, top field first. The top field is transmitted first.
`V4L2_FIELD_INTERLACED_BT` | 9 | Images contain both fields, interleaved line by line, top field first. The bottom field is transmitted first.

Figure 3-1. Field Order, Top Field First Transmitted

Figure 3-2. Field Order, Bottom Field First Transmitted

# Chapter 4. Interfaces

## 4.1. Video Capture Interface

Video capture devices sample an analog video signal and store the digitized images in memory. Today nearly all devices can capture at full 25 or 30 frames/second. With this interface applications can control the capture process and move images from the driver into user space.

Conventionally V4L2 video capture devices are accessed through character device special files named `/dev/video` and `/dev/video0` to `/dev/video63` with major number 81 and minor numbers 0 to 63. `/dev/video` is typically a symbolic link to the preferred video device. Note the same device files are used for video output devices.

### 4.1.1. Querying Capabilities

Devices supporting the video capture interface set the `V4L2_CAP_VIDEO_CAPTURE` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl. As secondary device functions they may also support the video overlay (`V4L2_CAP_VIDEO_OVERLAY`) and the raw VBI capture (`V4L2_CAP_VBI_CAPTURE`) interface. At least one of the read/write or streaming I/O methods must be supported. Tuners and audio inputs are optional.

### 4.1.2. Supplemental Functions

Video capture devices shall support audio input, tuner, controls, cropping and scaling and streaming parameter ioctls as needed. The video input and video standard ioctls must be supported by all video capture devices.

### 4.1.3. Image Format Negotiation

The result of a capture operation is determined by cropping and image format parameters. The former select an area of the video picture to capture, the latter how images are stored in memory, i. e. in RGB or YUV format, the number of bits per pixel or width and height. Together they also define how images are scaled in the process.

As usual these parameters are not reset at `open()` time to permit Unix tool chains, programming a device and then reading from it as if it was a plain file. Well written V4L2 applications ensure they really get what they want, including cropping and scaling.

Cropping initialization at minimum requires to reset the parameters to defaults. An example is given in Section 1.11.

To query the current image format applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VIDEO_CAPTURE` and call the `VIDIOC_G_FMT` ioctl with a pointer to this structure. Drivers fill the struct v4l2_pix_format `pix` member of the `fmt` union.

To request different parameters applications set the `type` field of a struct v4l2_format as above and initialize all fields of the struct v4l2_pix_format `vbi` member of the `fmt` union, or better just modify the results of `VIDIOC_G_FMT`, and call the `VIDIOC_S_FMT` ioctl with a pointer to this structure. Drivers may adjust the parameters and finally return the actual parameters as `VIDIOC_G_FMT` does.

Like `VIDIOC_S_FMT` the `VIDIOC_TRY_FMT` ioctl can be used to learn about hardware limitations without disabling I/O or possibly time consuming hardware preparations.

The contents of struct v4l2_pix_format are discussed in Chapter 2. See also the specification of the `VIDIOC_G_FMT`, `VIDIOC_S_FMT` and `VIDIOC_TRY_FMT` ioctls for details. Video capture devices must implement both the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctl, even if `VIDIOC_S_FMT` ignores all requests and always returns default parameters as `VIDIOC_G_FMT` does. `VIDIOC_TRY_FMT` is optional.

### 4.1.4. Reading Images

A video capture device may support the read() function and/or streaming (memory mapping or user pointer) I/O. See Chapter 3 for details.

## 4.2. Video Overlay Interface

Also known as Framebuffer Overlay or Previewing

Video overlay devices have the ability to genlock (TV-)video into the (VGA-)video signal of a graphics card, or to store captured images directly in video memory of a graphics card, typically with clipping. This can be considerable more efficient than capturing images and displaying them by other means. In the old days when only nuclear power plants needed cooling towers this used to be the only way to put live video into a window.

Video overlay devices are accessed through the same character special files as video capture devices. Note the default function of a `/dev/video` device is video capturing. The overlay function is only available after calling the `VIDIOC_S_FMT` ioctl.

The driver may support simultaneous overlay and capturing using the read/write and streaming I/O methods. If so, operation at the nominal frame rate of the video standard is not guaranteed. Frames may be directed away from overlay to capture, or one field may be used for overlay and the other for capture if the capture parameters permit this.

Applications should use different file descriptors for capturing and overlay. This must be supported by all drivers capable of simultaneous capturing and overlay. Optionally these drivers may also permit capturing and overlay with a single file descriptor for compatibility with V4L and earlier versions of V4L2.[20]

### 4.2.1. Querying Capabilities

Devices supporting the video overlay interface set the `V4L2_CAP_VIDEO_OVERLAY` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl. The overlay I/O method specified below must be supported. Tuners and audio inputs are optional.

### 4.2.2. Supplemental Functions

Video overlay devices shall support audio input, tuner, controls, cropping and scaling and streaming parameter ioctls as needed. The video input and video standard ioctls must be supported by all video overlay devices.

### 4.2.3. Setup

Before overlay can commence applications must program the driver with frame buffer parameters, namely the address and size of the frame buffer and the image format, for example RGB 5:6:5. The `VIDIOC_G_FBUF` and `VIDIOC_S_FBUF` ioctls are available to get and set these parameters, respectively. The `VIDIOC_S_FBUF` ioctl is privileged because it allows to set up DMA into physical memory, bypassing the memory protection mechanisms of the kernel. Only the superuser can change the frame buffer address and size. Users are not supposed to run TV applications as root or with SUID bit set. A small helper application with suitable privileges should query the graphics system and program the V4L2 driver at the appropriate time.

Some devices add the video overlay to the output signal of the graphics card. In this case the frame buffer is not modified by the video device, and the frame buffer address and pixel format are not needed by the driver. The `VIDIOC_S_FBUF` ioctl is not privileged. An application can check for this type of device by calling the `VIDIOC_G_FBUF` ioctl.

A driver may support any (or none) of five clipping/blending methods:

1. Chroma-keying displays the overlaid image only where pixels in the primary graphics surface assume a certain color.

2. A bitmap can be specified where each bit corresponds to a pixel in the overlaid image. When the bit is set, the corresponding video pixel is displayed, otherwise a pixel of the graphics surface.

3. A list of clipping rectangles can be specified. In these regions no video is displayed, so the graphics surface can be seen here.

4. The framebuffer has an alpha channel that can be used to clip or blend the framebuffer with the video.

5. A global alpha value can be specified to blend the framebuffer contents with video images.

When simultaneous capturing and overlay is supported and the hardware prohibits different image and frame buffer formats, the format requested first takes precedence. The attempt to capture (`VIDIOC_S_FMT`) or overlay (`VIDIOC_S_FBUF`) may fail with an EBUSY error code or return accordingly modified parameters..

### 4.2.4. Overlay Window

The overlaid image is determined by cropping and overlay window parameters. The former select an area of the video picture to capture, the latter how images are overlaid and clipped. Cropping initialization at minimum requires to reset the parameters to defaults. An example is given in Section 1.11.

The overlay window is described by a struct v4l2_window. It defines the size of the image, its position over the graphics surface and the clipping to be applied. To get the current parameters applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VIDEO_OVERLAY` and call the `VIDIOC_G_FMT` ioctl. The driver fills the `v4l2_window` substructure named `win`. It is not possible to retrieve a previously programmed clipping list or bitmap.

To program the overlay window applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VIDEO_OVERLAY`, initialize the `win` substructure and call the `VIDIOC_S_FMT` ioctl. The driver adjusts the parameters against hardware limits and returns the actual parameters as `VIDIOC_G_FMT` does. Like `VIDIOC_S_FMT`, the `VIDIOC_TRY_FMT` ioctl can be used to learn about driver capabilities without actually changing driver state. Unlike `VIDIOC_S_FMT` this also works after the overlay has been enabled.

The scaling factor of the overlaid image is implied by the width and height given in struct v4l2_window and the size of the cropping rectangle. For more information see Section 1.11.

When simultaneous capturing and overlay is supported and the hardware prohibits different image and window sizes, the size requested first takes precedence. The attempt to capture or overlay as well (`VIDIOC_S_FMT`) may fail with an EBUSY error code or return accordingly modified parameters.

Table 4-1. struct `v4l2_window`

struct v4l2_rect | `w` | Size and position of the window relative to the top, left corner of the frame buffer defined with `VIDIOC_S_FBUF`. The window can extend the frame buffer width and height, the `x` and `y` coordinates can be negative, and it can lie completely outside the frame buffer. The driver clips the window accordingly, or if that is not possible, modifies its size and/or position.
enum v4l2_field | `field` | Applications set this field to determine which video field shall be overlaid, typically one of `V4L2_FIELD_ANY` (0), `V4L2_FIELD_TOP`, `V4L2_FIELD_BOTTOM` or `V4L2_FIELD_INTERLACED`. Drivers may have to choose a different field order and return the actual setting here.
__u32 | `chromakey` | When chroma-keying has been negotiated with `VIDIOC_S_FBUF` applications set this field to the desired pixel value for the chroma key. The format is the same as the pixel format of the framebuffer (struct v4l2_framebuffer `fmt.pixelformat` field), with bytes in host order. E. g. for `V4L2_PIX_FMT_BGR24` the value should be 0xRRGGBB on a little endian, 0xBBGGRR on a big endian host.
struct v4l2_clip * | `clips` | When chroma-keying has not been negotiated and `VIDIOC_G_FBUF` indicated this capability, applications can set this field to point to an array of clipping rectangles.
Like the window coordinates `w`, clipping rectangles are defined relative to the top, left corner of the frame buffer. However clipping rectangles must not extend the frame buffer width and height, and they must not overlap. If possible applications should merge adjacent rectangles. Whether this must create x-y or y-x bands, or the order of rectangles, is not defined. When clip lists are not supported the driver ignores this field. Its contents after calling `VIDIOC_S_FMT` are undefined.
__u32 | `clipcount` | When the application set the `clips` field, this field must contain the number of clipping rectangles in the list. When clip lists are not supported the driver ignores this field, its contents after calling `VIDIOC_S_FMT` are undefined. When clip lists are supported but no clipping is desired this field must be set to zero.
void * | `bitmap` | When chroma-keying has not been negotiated and `VIDIOC_G_FBUF` indicated this capability, applications can set this field to point to a clipping bit mask.
It must be of the same size as the window, `w.width` and `w.height`. Each bit corresponds to a pixel in the overlaid image, which is displayed only when the bit is set. Pixel coordinates translate to bits like:
    ((__u8 *) bitmap)[w.width * y + x / 8] & (1 << (x & 7))
where `0` ≤ x < `w.width` and `0` ≤ y <`w.height`.a When a clipping bit mask is not supported the driver ignores this field, its contents after calling `VIDIOC_S_FMT` are undefined. When a bit mask is supported but no clipping is desired this field must be set to `NULL`. Applications need not create a clip list or bit mask. When they pass both, or despite negotiating chroma-keying, the results are undefined. Regardless of the chosen method, the clipping abilities of the hardware may be limited in quantity or quality. The results when these limits are exceeded are undefined.b
__u8 | `global_alpha` | The global alpha value used to blend the framebuffer with video images, if global alpha blending has been negotiated (`V4L2_FBUF_FLAG_GLOBAL_ALPHA`, see `VIDIOC_S_FBUF`, Table 3). Note this field was added in Linux 2.6.23, extending the structure. However the VIDIOC_G/S/TRY_FMT ioctls, which take a pointer to a v4l2_format parent structure with padding bytes at the end, are not affected.
Notes: a. Should we require `w.width` to be a multiple of eight? b. When the image is written into frame buffer memory it will be undesirable if the driver clips out less pixels than expected, because the application and graphics system are not aware these regions need to be refreshed. The driver should clip out more pixels or not write the image at all.

Table 4-2. struct `v4l2_clip`[21]

struct v4l2_rect | `c` | Coordinates of the clipping rectangle, relative to the top, left corner of the frame buffer. Only window pixels outside all clipping rectangles are displayed.
struct v4l2_clip * | `next` | Pointer to the next clipping rectangle, NULL when this is the last rectangle. Drivers ignore this field, it cannot be used to pass a linked list of clipping rectangles.

Table 4-3. struct `v4l2_rect`

__s32 | `left` | Horizontal offset of the top, left corner of the rectangle, in pixels.
__s32 | `top` | Vertical offset of the top, left corner of the rectangle, in pixels. Offsets increase to the right and down.
__s32 | `width` | Width of the rectangle, in pixels.
__s32 | `height` | Height of the rectangle, in pixels. Width and height cannot be negative, the fields are signed for hysterical reasons.

### 4.2.5. Enabling Overlay

To start or stop the frame buffer overlay applications call the `VIDIOC_OVERLAY` ioctl.

## 4.3. Video Output Interface

Video output devices encode stills or image sequences as analog video signal. With this interface applications can control the encoding process and move images from user space to the driver.

Conventionally V4L2 video output devices are accessed through character device special files named `/dev/video` and `/dev/video0` to `/dev/video63` with major number 81 and minor numbers 0 to 63. `/dev/video` is typically a symbolic link to the preferred video device. Note the same device files are used for video capture devices.

### 4.3.1. Querying Capabilities

Devices supporting the video output interface set the `V4L2_CAP_VIDEO_OUTPUT` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl. As secondary device functions they may also support the raw VBI output (`V4L2_CAP_VBI_OUTPUT`) interface. At least one of the read/write or streaming I/O methods must be supported. Modulators and audio outputs are optional.

### 4.3.2. Supplemental Functions

Video output devices shall support audio output, modulator, controls, cropping and scaling and streaming parameter ioctls as needed. The video output and video standard ioctls must be supported by all video output devices.

### 4.3.3. Image Format Negotiation

The output is determined by cropping and image format parameters. The former select an area of the video picture where the image will appear, the latter how images are stored in memory, i. e. in RGB or YUV format, the number of bits per pixel or width and height. Together they also define how images are scaled in the process.

As usual these parameters are not reset at `open()` time to permit Unix tool chains, programming a device and then writing to it as if it was a plain file. Well written V4L2 applications ensure they really get what they want, including cropping and scaling.

Cropping initialization at minimum requires to reset the parameters to defaults. An example is given in Section 1.11.

To query the current image format applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VIDEO_OUTPUT` and call the `VIDIOC_G_FMT` ioctl with a pointer to this structure. Drivers fill the struct v4l2_pix_format `pix` member of the `fmt` union.

To request different parameters applications set the `type` field of a struct v4l2_format as above and initialize all fields of the struct v4l2_pix_format `vbi` member of the `fmt` union, or better just modify the results of `VIDIOC_G_FMT`, and call the `VIDIOC_S_FMT` ioctl with a pointer to this structure. Drivers may adjust the parameters and finally return the actual parameters as `VIDIOC_G_FMT` does.

Like `VIDIOC_S_FMT` the `VIDIOC_TRY_FMT` ioctl can be used to learn about hardware limitations without disabling I/O or possibly time consuming hardware preparations.

The contents of struct v4l2_pix_format are discussed in Chapter 2. See also the specification of the `VIDIOC_G_FMT`, `VIDIOC_S_FMT` and `VIDIOC_TRY_FMT` ioctls for details. Video output devices must implement both the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctl, even if `VIDIOC_S_FMT` ignores all requests and always returns default parameters as `VIDIOC_G_FMT` does. `VIDIOC_TRY_FMT` is optional.

### 4.3.4. Writing Images

A video output device may support the write() function and/or streaming (memory mapping or user pointer) I/O. See Chapter 3 for details.

## 4.4. Video Output Overlay Interface

Also known as On-Screen Display (OSD)

> Experimental: This is an experimental interface and may change in the future.

Some video output devices can overlay a framebuffer image onto the outgoing video signal. Applications can set up such an overlay using this interface, which borrows structures and ioctls of the Video Overlay interface.

The OSD function is accessible through the same character special file as the Video Output function. Note the default function of such a `/dev/video` device is video capturing or output. The OSD function is only available after calling the `VIDIOC_S_FMT` ioctl.

### 4.4.1. Querying Capabilities

Devices supporting the Video Output Overlay interface set the `V4L2_CAP_VIDEO_OUTPUT_OVERLAY` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl.

### 4.4.2. Framebuffer

Contrary to the Video Overlay interface the framebuffer is normally implemented on the TV card and not the graphics card. On Linux it is accessible as a framebuffer device (`/dev/fbN`). Given a V4L2 device, applications can find the corresponding framebuffer device by calling the `VIDIOC_G_FBUF` ioctl. It returns, amongst other information, the physical address of the framebuffer in the `base` field of struct v4l2_framebuffer. The framebuffer device ioctl `FBIOGET_FSCREENINFO` returns the same address in the `smem_start` field of struct `fb_fix_screeninfo`. The `FBIOGET_FSCREENINFO` ioctl and struct `fb_fix_screeninfo` are defined in the `linux/fb.h` header file.

The width and height of the framebuffer depends on the current video standard. A V4L2 driver may reject attempts to change the video standard (or any other ioctl which would imply a framebuffer size change) with an EBUSY error code until all applications closed the framebuffer device.

Example 4-1. Finding a framebuffer device for OSD

    #include <linux/fb.h>

    struct v4l2_framebuffer fbuf;
    unsigned int i;
    int fb_fd;

    if (-1 == ioctl (fd, VIDIOC_G_FBUF, &fbuf)) {
            perror ("VIDIOC_G_FBUF");
            exit (EXIT_FAILURE);
    }

    for (i = 0; i < 30; ++i) {
            char dev_name[16];
            struct fb_fix_screeninfo si;

            snprintf (dev_name, sizeof (dev_name), "/dev/fb%u", i);

            fb_fd = open (dev_name, O_RDWR);
            if (-1 == fb_fd) {
                    switch (errno) {
                    case ENOENT: /* no such file */
                    case ENXIO:  /* no driver */
                            continue;

                    default:
                            perror ("open");
                            exit (EXIT_FAILURE);
                    }
            }

            if (0 == ioctl (fb_fd, FBIOGET_FSCREENINFO, &si)) {
                    if (si.smem_start == (unsigned long) fbuf.base)
                            break;
            } else {
                    /* Apparently not a framebuffer device. */
            }

            close (fb_fd);
            fb_fd = -1;
    }

    /* fb_fd is the file descriptor of the framebuffer device
       for the video output overlay, or -1 if no device was found. */

### 4.4.3. Overlay Window and Scaling

The overlay is controlled by source and target rectangles. The source rectangle selects a subsection of the framebuffer image to be overlaid, the target rectangle an area in the outgoing video signal where the image will appear. Drivers may or may not support scaling, and arbitrary sizes and positions of these rectangles. Further drivers may support any (or none) of the clipping/blending methods defined for the Video Overlay interface.

A struct v4l2_window defines the size of the source rectangle, its position in the framebuffer and the clipping/blending method to be used for the overlay. To get the current parameters applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY` and call the `VIDIOC_G_FMT` ioctl. The driver fills the `v4l2_window` substructure named `win`. It is not possible to retrieve a previously programmed clipping list or bitmap.

To program the source rectangle applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY`, initialize the `win` substructure and call the `VIDIOC_S_FMT` ioctl. The driver adjusts the parameters against hardware limits and returns the actual parameters as `VIDIOC_G_FMT` does. Like `VIDIOC_S_FMT`, the `VIDIOC_TRY_FMT` ioctl can be used to learn about driver capabilities without actually changing driver state. Unlike `VIDIOC_S_FMT` this also works after the overlay has been enabled.

A struct v4l2_crop defines the size and position of the target rectangle. The scaling factor of the overlay is implied by the width and height given in struct v4l2_window and struct v4l2_crop. The cropping API applies to Video Output and Video Output Overlay devices in the same way as to Video Capture and Video Overlay devices, merely reversing the direction of the data flow. For more information see Section 1.11.

### 4.4.4. Enabling Overlay

There is no V4L2 ioctl to enable or disable the overlay, however the framebuffer interface of the driver may support the `FBIOBLANK` ioctl.

## 4.5. Codec Interface

> Suspended: This interface has been be suspended from the V4L2 API implemented in Linux 2.6 until we have more experience with codec device interfaces.

A V4L2 codec can compress, decompress, transform, or otherwise convert video data from one format into another format, in memory. Applications send data to be converted to the driver through a `write()` call, and receive the converted data through a `read()` call. For efficiency a driver may also support streaming I/O.

[to do]

## 4.6. Effect Devices Interface

> Suspended: This interface has been be suspended from the V4L2 API implemented in Linux 2.6 until we have more experience with effect device interfaces.

A V4L2 video effect device can do image effects, filtering, or combine two or more images or image streams. For example video transitions or wipes. Applications send data to be processed and receive the result data either with `read()` and `write()` functions, or through the streaming I/O mechanism.

[to do]

## 4.7. Raw VBI Data Interface

VBI is an abbreviation of Vertical Blanking Interval, a gap in the sequence of lines of an analog video signal. During VBI no picture information is transmitted, allowing some time while the electron beam of a cathode ray tube TV returns to the top of the screen. Using an oscilloscope you will find here the vertical synchronization pulses and short data packages ASK modulated[22] onto the video signal. These are transmissions of services such as Teletext or Closed Caption.

Subject of this interface type is raw VBI data, as sampled off a video signal, or to be added to a signal for output. The data format is similar to uncompressed video images, a number of lines times a number of samples per line, we call this a VBI image.

Conventionally V4L2 VBI devices are accessed through character device special files named `/dev/vbi` and `/dev/vbi0` to `/dev/vbi31` with major number 81 and minor numbers 224 to 255. `/dev/vbi` is typically a symbolic link to the preferred VBI device. This convention applies to both input and output devices.

To address the problems of finding related video and VBI devices VBI capturing and output is also available as device function under `/dev/video`. To capture or output raw VBI data with these devices applications must call the `VIDIOC_S_FMT` ioctl. Accessed as `/dev/vbi`, raw VBI capturing or output is the default device function.

### 4.7.1. Querying Capabilities

Devices supporting the raw VBI capturing or output API set the `V4L2_CAP_VBI_CAPTURE` or `V4L2_CAP_VBI_OUTPUT` flags, respectively, in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl. At least one of the read/write, streaming or asynchronous I/O methods must be supported. VBI devices may or may not have a tuner or modulator.

### 4.7.2. Supplemental Functions

VBI devices shall support video input or output, tuner or modulator, and controls ioctls as needed. The video standard ioctls provide information vital to program a VBI device, therefore must be supported.

### 4.7.3. Raw VBI Format Negotiation

Raw VBI sampling abilities can vary, in particular the sampling frequency. To properly interpret the data V4L2 specifies an ioctl to query the sampling parameters. Moreover, to allow for some flexibility applications can also suggest different parameters.

As usual these parameters are not reset at `open()` time to permit Unix tool chains, programming a device and then reading from it as if it was a plain file. Well written V4L2 applications should always ensure they really get what they want, requesting reasonable parameters and then checking if the actual parameters are suitable.

To query the current raw VBI capture parameters applications set the `type` field of a struct v4l2_format to `V4L2_BUF_TYPE_VBI_CAPTURE` or `V4L2_BUF_TYPE_VBI_OUTPUT`, and call the `VIDIOC_G_FMT` ioctl with a pointer to this structure. Drivers fill the struct v4l2_vbi_format `vbi` member of the `fmt` union.

To request different parameters applications set the `type` field of a struct v4l2_format as above and initialize all fields of the struct v4l2_vbi_format `vbi` member of the `fmt` union, or better just modify the results of `VIDIOC_G_FMT`, and call the `VIDIOC_S_FMT` ioctl with a pointer to this structure. Drivers return an EINVAL error code only when the given parameters are ambiguous, otherwise they modify the parameters according to the hardware capabilites and return the actual parameters. When the driver allocates resources at this point, it may return an EBUSY error code to indicate the returned parameters are valid but the required resources are currently not available. That may happen for instance when the video and VBI areas to capture would overlap, or when the driver supports multiple opens and another process already requested VBI capturing or output. Anyway, applications must expect other resource allocation points which may return EBUSY, at the `VIDIOC_STREAMON` ioctl and the first read(), write() and select() call.

VBI devices must implement both the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctl, even if `VIDIOC_S_FMT` ignores all requests and always returns default parameters as `VIDIOC_G_FMT` does. `VIDIOC_TRY_FMT` is optional.

Table 4-4. struct `v4l2_vbi_format`

__u32 | `sampling_rate` | Samples per second, i. e. unit 1 Hz.
__u32 | `offset` | Horizontal offset of the VBI image, relative to the leading edge of the line synchronization pulse and counted in samples: The first sample in the VBI image will be located `offset` / `sampling_rate` seconds following the leading edge. See also Figure 4-1.
__u32 | `samples_per_line` |
__u32 | `sample_format` | Defines the sample format as in Chapter 2, a four-character-code.a Usually this is `V4L2_PIX_FMT_GREY`, i. e. each sample consists of 8 bits with lower values oriented towards the black level. Do not assume any other correlation of values with the signal level. For example, the MSB does not necessarily indicate if the signal is 'high' or 'low' because 128 may not be the mean value of the signal. Drivers shall not convert the sample format by software.
__u32 | `start`[2] | This is the scanning system line number associated with the first line of the VBI image, of the first and the second field respectively. See Figure 4-2 and Figure 4-3 for valid values. VBI input drivers can return start values 0 if the hardware cannot reliable identify scanning lines, VBI acquisition may not require this information.
__u32 | `count`[2] | The number of lines in the first and second field image, respectively.
Drivers should be as flexibility as possible. For example, it may be possible to extend or move the VBI capture window down to the picture area, implementing a 'full field mode' to capture data service transmissions embedded in the picture. An application can set the first or second `count` value to zero if no data is required from the respective field; `count`[1] if the scanning system is progressive, i. e. not interlaced. The corresponding start value shall be ignored by the application and driver. Anyway, drivers may not support single field capturing and return both count values non-zero. Both `count` values set to zero, or line numbers outside the bounds depicted in Figure 4-2 and Figure 4-3, or a field image covering lines of two fields, are invalid and shall not be returned by the driver. To initialize the `start` and `count` fields, applications must first determine the current video standard selection. The v4l2_std_id or the `framelines` field of struct v4l2_standard can be evaluated for this purpose.
__u32 | `flags` | See Table 4-5 below. Currently only drivers set flags, applications must set this field to zero.
__u32 | `reserved`[2] | This array is reserved for future extensions. Drivers and applications must set it to zero.
Notes: a. A few devices may be unable to sample VBI data at all but can extend the video capture window to the VBI region.

Table 4-5. Raw VBI Format Flags

`V4L2_VBI_UNSYNC` | 0x0001 | This flag indicates hardware which does not properly distinguish between fields. Normally the VBI image stores the first field (lower scanning line numbers) first in memory. This may be a top or bottom field depending on the video standard. When this flag is set the first or second field may be stored first, however the fields are still in correct temporal order with the older field first in memory.a
`V4L2_VBI_INTERLACED` | 0x0002 | By default the two field images will be passed sequentially; all lines of the first field followed by all lines of the second field (compare Section 3.6 `V4L2_FIELD_SEQ_TB` and `V4L2_FIELD_SEQ_BT`, whether the top or bottom field is first in memory depends on the video standard). When this flag is set, the two fields are interlaced (cf. `V4L2_FIELD_INTERLACED`). The first line of the first field followed by the first line of the second field, then the two second lines, and so on. Such a layout may be necessary when the hardware has been programmed to capture or output interlaced video images and is unable to separate the fields for VBI capturing at the same time. For simplicity setting this flag implies that both `count` values are equal and non-zero.
Notes: a. Most VBI services transmit on both fields, but some have different semantics depending on the field number. These cannot be reliable decoded or encoded when `V4L2_VBI_UNSYNC` is set.

Figure 4-1. Line synchronization

Figure 4-2. ITU-R 525 line numbering (M/NTSC and M/PAL)

(1) For the purpose of this specification field 2 starts in line 264 and not 263.5 because half line capturing is not supported.

Figure 4-3. ITU-R 625 line numbering

(1) For the purpose of this specification field 2 starts in line 314 and not 313.5 because half line capturing is not supported.

Remember the VBI image format depends on the selected video standard, therefore the application must choose a new standard or query the current standard first. Attempts to read or write data ahead of format negotiation, or after switching the video standard which may invalidate the negotiated VBI parameters, should be refused by the driver. A format change during active I/O is not permitted.

### 4.7.4. Reading and writing VBI images

To assure synchronization with the field number and easier implementation, the smallest unit of data passed at a time is one frame, consisting of two fields of VBI images immediately following in memory.

The total size of a frame computes as follows:

    (count[0] + count[1]) *
    samples_per_line * sample size in bytes

The sample size is most likely always one byte, applications must check the `sample_format` field though, to function properly with other drivers.

A VBI device may support read/write and/or streaming (memory mapping or user pointer) I/O. The latter bears the possibility of synchronizing video and VBI data by using buffer timestamps.

Remember the `VIDIOC_STREAMON` ioctl and the first read(), write() and select() call can be resource allocation points returning an EBUSY error code if the required hardware resources are temporarily unavailable, for example the device is already in use by another process.

## 4.8. Sliced VBI Data Interface

VBI stands for Vertical Blanking Interval, a gap in the sequence of lines of an analog video signal. During VBI no picture information is transmitted, allowing some time while the electron beam of a cathode ray tube TV returns to the top of the screen.

Sliced VBI devices use hardware to demodulate data transmitted in the VBI. V4L2 drivers shall not do this by software, see also the raw VBI interface. The data is passed as short packets of fixed size, covering one scan line each. The number of packets per video frame is variable.

Sliced VBI capture and output devices are accessed through the same character special files as raw VBI devices. When a driver supports both interfaces, the default function of a `/dev/vbi` device is raw VBI capturing or output, and the sliced VBI function is only available after calling the `VIDIOC_S_FMT` ioctl as defined below. Likewise a `/dev/video` device may support the sliced VBI API, however the default function here is video capturing or output. Different file descriptors must be used to pass raw and sliced VBI data simultaneously, if this is supported by the driver.

### 4.8.1. Querying Capabilities

Devices supporting the sliced VBI capturing or output API set the `V4L2_CAP_SLICED_VBI_CAPTURE` or `V4L2_CAP_SLICED_VBI_OUTPUT` flag respectively, in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl. At least one of the read/write, streaming or asynchronous I/O methods must be supported. Sliced VBI devices may have a tuner or modulator.

### 4.8.2. Supplemental Functions

Sliced VBI devices shall support video input or output and tuner or modulator ioctls if they have these capabilities, and they may support control ioctls. The video standard ioctls provide information vital to program a sliced VBI device, therefore must be supported.

### 4.8.3. Sliced VBI Format Negotiation

To find out which data services are supported by the hardware applications can call the `VIDIOC_G_SLICED_VBI_CAP` ioctl. All drivers implementing the sliced VBI interface must support this ioctl. The results may differ from those of the `VIDIOC_S_FMT` ioctl when the number of VBI lines the hardware can capture or output per frame, or the number of services it can identify on a given line are limited. For example on PAL line 16 the hardware may be able to look for a VPS or Teletext signal, but not both at the same time.

To determine the currently selected services applications set the `type` field of struct v4l2_format to `V4L2_BUF_TYPE_SLICED_VBI_CAPTURE` or `V4L2_BUF_TYPE_SLICED_VBI_OUTPUT`, and the `VIDIOC_G_FMT` ioctl fills the `fmt.sliced` member, a struct v4l2_sliced_vbi_format.

Applications can request different parameters by initializing or modifying the `fmt.sliced` member and calling the `VIDIOC_S_FMT` ioctl with a pointer to the `v4l2_format` structure.

The sliced VBI API is more complicated than the raw VBI API because the hardware must be told which VBI service to expect on each scan line. Not all services may be supported by the hardware on all lines (this is especially true for VBI output where Teletext is often unsupported and other services can only be inserted in one specific line). In many cases, however, it is sufficient to just set the `service_set` field to the required services and let the driver fill the `service_lines` array according to hardware capabilities. Only if more precise control is needed should the programmer set the `service_lines` array explicitly.

The `VIDIOC_S_FMT` ioctl returns an EINVAL error code only when the given parameters are ambiguous, otherwise it modifies the parameters according to hardware capabilities. When the driver allocates resources at this point, it may return an EBUSY error code if the required resources are temporarily unavailable. Other resource allocation points which may return EBUSY can be the `VIDIOC_STREAMON` ioctl and the first `read()`, `write()` and `select()` call.

Table 4-6. struct `v4l2_sliced_vbi_format`

__u32 | `service_set` | If `service_set` is non-zero when passed with `VIDIOC_S_FMT` or `VIDIOC_TRY_FMT`, the `service_lines` array will be filled by the driver according to the services specified in this field. For example, if `service_set` is initialized with `V4L2_SLICED_TELETEXT_B | V4L2_SLICED_WSS_625`, a driver for the cx25840 video decoder sets lines 7-22 of both fieldsa to `V4L2_SLICED_TELETEXT_B` and line 23 of the first field to `V4L2_SLICED_WSS_625`. If `service_set` is set to zero, then the values of `service_lines` will be used instead. On return the driver sets this field to the union of all elements of the returned `service_lines` array. It may contain less services than requested, perhaps just one, if the hardware cannot handle more services simultaneously. It may be empty (zero) if none of the requested services are supported by the hardware.
__u16 | `service_lines`[2][24] | Applications initialize this array with sets of data services the driver shall look for or insert on the respective scan line. Subject to hardware capabilities drivers return the requested set, a subset, which may be just a single service, or an empty set. When the hardware cannot handle multiple services on the same line the driver shall choose one. No assumptions can be made on which service the driver chooses. Data services are defined in Table 4-7. Array indices map to ITU-R line numbers (see also Figure 4-2 and Figure 4-3) as follows:
|  | Element | 525 line systems | 625 line systems
|  | `service_lines`[0][1] | 1 | 1
|  | `service_lines`[0][23] | 23 | 23
|  | `service_lines`[1][1] | 264 | 314
|  | `service_lines`[1][23] | 286 | 336
|  | Drivers must set `service_lines`[0][0] and `service_lines`[1][0] to zero.
__u32 | `io_size` | Maximum number of bytes passed by one `read()` or `write()` call, and the buffer size in bytes for the `VIDIOC_QBUF` and `VIDIOC_DQBUF` ioctl. Drivers set this field to the size of struct v4l2_sliced_vbi_data times the number of non-zero elements in the returned `service_lines` array (that is the number of lines potentially carrying data).
__u32 | `reserved`[2] | This array is reserved for future extensions. Applications and drivers must set it to zero.
Notes: a. According to ETS 300 706 lines 6-22 of the first field and lines 5-22 of the second field may carry Teletext data.

Table 4-7. Sliced VBI services

Symbol | Value | Reference | Lines, usually | Payload
--- | --- | --- | --- | ---
`V4L2_SLICED_TELETEXT_B` (Teletext System B) | 0x0001 | ETS 300 706, ITU BT.653 | PAL/SECAM line 7-22, 320-335 (second field 7-22) | Last 42 of the 45 byte Teletext packet, that is without clock run-in and framing code, lsb first transmitted.
`V4L2_SLICED_VPS` | 0x0400 | ETS 300 231 | PAL line 16 | Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb first transmitted.
`V4L2_SLICED_CAPTION_525` | 0x1000 | EIA 608-B | NTSC line 21, 284 (second field 21) | Two bytes in transmission order, including parity bit, lsb first transmitted.
`V4L2_SLICED_WSS_625` | 0x4000 | ITU BT.1119, EN 300 294 | PAL/SECAM line 23 |
    Byte         0                 1
          msb         lsb  msb           lsb
     Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
`V4L2_SLICED_VBI_525` | 0x1000 | Set of services applicable to 525 line systems.
`V4L2_SLICED_VBI_625` | 0x4401 | Set of services applicable to 625 line systems.

Drivers may return an EINVAL error code when applications attempt to read or write data without prior format negotiation, after switching the video standard (which may invalidate the negotiated VBI parameters) and after switching the video input (which may change the video standard as a side effect). The `VIDIOC_S_FMT` ioctl may return an EBUSY error code when applications attempt to change the format while i/o is in progress (between a `VIDIOC_STREAMON` and `VIDIOC_STREAMOFF` call, and after the first `read()` or `write()` call).

### 4.8.4. Reading and writing sliced VBI data

A single `read()` or `write()` call must pass all data belonging to one video frame. That is an array of `v4l2_sliced_vbi_data` structures with one or more elements and a total size not exceeding `io_size` bytes. Likewise in streaming I/O mode one buffer of `io_size` bytes must contain data of one video frame. The `id` of unused `v4l2_sliced_vbi_data` elements must be zero.

Table 4-8. struct `v4l2_sliced_vbi_data`

__u32 | `id` | A flag from Table 2 identifying the type of data in this packet. Only a single bit must be set. When the `id` of a captured packet is zero, the packet is empty and the contents of other fields are undefined. Applications shall ignore empty packets. When the `id` of a packet for output is zero the contents of the `data` field are undefined and the driver must no longer insert data on the requested `field` and `line`.
__u32 | `field` | The video field number this data has been captured from, or shall be inserted at. `0` for the first field, `1` for the second field.
__u32 | `line` | The field (as opposed to frame) line number this data has been captured from, or shall be inserted at. See Figure 4-2 and Figure 4-3 for valid values. Sliced VBI capture devices can set the line number of all packets to `0` if the hardware cannot reliably identify scan lines. The field number must always be valid.
__u32 | `reserved` | This field is reserved for future extensions. Applications and drivers must set it to zero.
__u8 | `data`[48] | The packet payload. See Table 2 for the contents and number of bytes passed for each data type. The contents of padding bytes at the end of this array are undefined, drivers and applications shall ignore them.

Packets are always passed in ascending line number order, without duplicate line numbers. The `write()` function and the `VIDIOC_QBUF` ioctl must return an EINVAL error code when applications violate this rule. They must also return an EINVAL error code when applications pass an incorrect field or line number, or a combination of `field`, `line` and `id` which has not been negotiated with the `VIDIOC_G_FMT` or `VIDIOC_S_FMT` ioctl. When the line numbers are unknown the driver must pass the packets in transmitted order. The driver can insert empty packets with `id` set to zero anywhere in the packet array.

To assure synchronization and to distinguish from frame dropping, when a captured frame does not carry any of the requested data services drivers must pass one or more empty packets. When an application fails to pass VBI data in time for output, the driver must output the last VPS and WSS packet again, and disable the output of Closed Caption and Teletext data, or output data which is ignored by Closed Caption and Teletext decoders.

A sliced VBI device may support read/write and/or streaming (memory mapping and/or user pointer) I/O. The latter bears the possibility of synchronizing video and VBI data by using buffer timestamps.

## 4.9. Teletext Interface

This interface aims at devices receiving and demodulating Teletext data [ETS 300 706, ITU BT.653], evaluating the Teletext packages and storing formatted pages in cache memory. Such devices are usually implemented as microcontrollers with serial interface (I2C) and can be found on older TV cards, dedicated Teletext decoding cards and home-brew devices connected to the PC parallel port.

The Teletext API was designed by Martin Buck. It is defined in the kernel header file `linux/videotext.h`, the specification is available from http://home.pages.de/~videotext/. (Videotext is the name of the German public television Teletext service.) Conventional character device file names are `/dev/vtx` and `/dev/vttuner`, with device number 83, 0 and 83, 16 respectively. A similar interface exists for the Philips SAA5249 Teletext decoder [specification?] with character device file names `/dev/tlkN`, device number 102, N.

Eventually the Teletext API was integrated into the V4L API with character device file names `/dev/vtx0` to `/dev/vtx31`, device major number 81, minor numbers 192 to 223. For reference the V4L Teletext API specification is reproduced here in full: "Teletext interfaces talk the existing VTX API." Teletext devices with major number 83 and 102 will be removed in Linux 2.6.

There are no plans to replace the Teletext API or to integrate it into V4L2. Please write to the Video4Linux mailing list: https://listman.redhat.com/mailman/listinfo/video4linux-list when the need arises.

## 4.10. Radio Interface

This interface is intended for AM and FM (analog) radio receivers.

Conventionally V4L2 radio devices are accessed through character device special files named `/dev/radio` and `/dev/radio0` to `/dev/radio63` with major number 81 and minor numbers 64 to 127.

### 4.10.1. Querying Capabilities

Devices supporting the radio interface set the `V4L2_CAP_RADIO` and `V4L2_CAP_TUNER` flag in the `capabilities` field of struct v4l2_capability returned by the `VIDIOC_QUERYCAP` ioctl. Other combinations of capability flags are reserved for future extensions.

### 4.10.2. Supplemental Functions

Radio devices can support controls, and must support the tuner ioctls.

They do not support the video input or output, audio input or output, video standard, cropping and scaling, compression and streaming parameter, or overlay ioctls. All other ioctls and I/O methods are reserved for future extensions.

### 4.10.3. Programming

Radio devices may have a couple audio controls (as discussed in Section 1.8) such as a volume control, possibly custom controls. Further all radio devices have one tuner (these are discussed in Section 1.6) with index number zero to select the radio frequency and to determine if a monaural or FM stereo program is received. Drivers switch automatically between AM and FM depending on the selected frequency. The `VIDIOC_G_TUNER` ioctl reports the supported frequency range.

## 4.11. RDS Interface

The Radio Data System transmits supplementary information in binary format, for example the station name or travel information, on a inaudible audio subcarrier of a radio program. This interface aims at devices capable of receiving and decoding RDS information.

The V4L API defines its RDS API as follows.

From radio devices supporting it, RDS data can be read with the `read()` function. The data is packed in groups of three, as follows:

1. First Octet Least Significant Byte of RDS Block

2. Second Octet Most Significant Byte of RDS Block

3. Third Octet Bit 7: Error bit. Indicates that an uncorrectable error occurred during reception of this block. Bit 6: Corrected bit. Indicates that an error was corrected for this data block. Bits 5-3: Received Offset. Indicates the offset received by the sync system. Bits 2-0: Offset Name. Indicates the offset applied to this data.

It was argued the RDS API should be extended before integration into V4L2, no new API has been devised yet. Please write to the Video4Linux mailing list for discussion: https://listman.redhat.com/mailman/listinfo/video4linux-list. Meanwhile no V4L2 driver should set the `V4L2_CAP_RDS_CAPTURE` capability flag.

# I. Function Reference

# V4L2 close()

## Name

v4l2-close -- Close a V4L2 device

## Synopsis

    #include <unistd.h>

``int close`(int fd);`

## Arguments

`fd`

  File descriptor returned by `open()`.

## Description

Closes the device. Any I/O in progress is terminated and resources associated with the file descriptor are freed. However data format parameters, current input or output, control values or other properties remain unchanged.

## Return Value

The function returns 0 on success, -1 on failure and the `errno` is set appropriately. Possible error codes:

EBADF

  `fd` is not a valid open file descriptor.

# V4L2 ioctl()

## Name

v4l2-ioctl -- Program a V4L2 device

## Synopsis

    #include <sys/ioctl.h>

``int ioctl`(int fd, int request, void *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  V4L2 ioctl request code as defined in the videodev.h header file, for example VIDIOC_QUERYCAP.

`argp`

  Pointer to a function parameter, usually a structure.

## Description

The `ioctl()` function is used to program V4L2 devices. The argument `fd` must be an open file descriptor. An ioctl `request` has encoded in it whether the argument is an input, output or read/write parameter, and the size of the argument `argp` in bytes. Macros and defines specifying V4L2 ioctl requests are located in the videodev.h header file. Applications should use their own copy, not include the version in the kernel sources on the system they compile on. All V4L2 ioctl requests, their respective function and parameters are specified in Reference I, Function Reference.

## Return Value

On success the `ioctl()` function returns 0 and does not reset the `errno` variable. On failure -1 is returned, when the ioctl takes an output or read/write parameter it remains unmodified, and the `errno` variable is set appropriately. See below for possible error codes. Generic errors like EBADF or EFAULT are not listed in the sections discussing individual ioctl requests.

Note ioctls may return undefined error codes. Since errors may have side effects such as a driver reset applications should abort on unexpected errors.

EBADF

  `fd` is not a valid open file descriptor.

EBUSY

  The property cannot be changed right now. Typically this error code is returned when I/O is in progress or the driver supports multiple opens and another process locked the property.

EFAULT

  `argp` references an inaccessible memory area.

ENOTTY

  `fd` is not associated with a character special device.

EINVAL

  The `request` or the data pointed to by `argp` is not valid. This is a very common error code, see the individual ioctl requests listed in Reference I, Function Reference for actual causes.

ENOMEM

  Not enough physical or virtual memory was available to complete the request.

ERANGE

  The application attempted to set a control with the `VIDIOC_S_CTRL` ioctl to a value which is out of bounds.

# ioctl VIDIOC_CROPCAP

## Name

VIDIOC_CROPCAP -- Information about the video cropping and scaling abilities

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_cropcap *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_CROPCAP

`argp`

## Description

Applications use this function to query the cropping limits, the pixel aspect of images and to calculate scale factors. They set the `type` field of a v4l2_cropcap structure to the respective buffer (stream) type and call the `VIDIOC_CROPCAP` ioctl with a pointer to this structure. Drivers fill the rest of the structure. The results are constant except when switching the video standard. Remember this switch can occur implicit when switching the video input or output.

Table 1. struct `v4l2_cropcap`

enum v4l2_buf_type | `type` | Type of the data stream, set by the application. Only these types are valid here: `V4L2_BUF_TYPE_VIDEO_CAPTURE`, `V4L2_BUF_TYPE_VIDEO_OUTPUT`, `V4L2_BUF_TYPE_VIDEO_OVERLAY`, and custom (driver defined) types with code `V4L2_BUF_TYPE_PRIVATE` and higher.
struct v4l2_rect | `bounds` | Defines the window within capturing or output is possible, this may exclude for example the horizontal and vertical blanking areas. The cropping rectangle cannot exceed these limits. Width and height are defined in pixels, the driver writer is free to choose origin and units of the coordinate system in the analog domain.
struct v4l2_rect | `defrect` | Default cropping rectangle, it shall cover the "whole picture". Assuming pixel aspect 1/1 this could be for example a 640 × 480 rectangle for NTSC, a 768 × 576 rectangle for PAL and SECAM centered over the active picture area. The same co-ordinate system as for `bounds` is used.
struct v4l2_fract | `pixelaspect` | This is the pixel aspect (y / x) when no scaling is applied, the ratio of the actual sampling frequency and the frequency required to get square pixels. When cropping coordinates refer to square pixels, the driver sets `pixelaspect` to 1/1. Other common values are 54/59 for PAL and SECAM, 11/10 for NTSC sampled according to [ITU BT.601].

Table 2. struct `v4l2_rect`

__s32 | `left` | Horizontal offset of the top, left corner of the rectangle, in pixels.
__s32 | `top` | Vertical offset of the top, left corner of the rectangle, in pixels.
__s32 | `width` | Width of the rectangle, in pixels.
__s32 | `height` | Height of the rectangle, in pixels. Width and height cannot be negative, the fields are signed for hysterical reasons.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_cropcap `type` is invalid or the ioctl is not supported. This is not permitted for video capture, output and overlay devices, which must support `VIDIOC_CROPCAP`.

# ioctl VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER

## Name

VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER -- Read or write hardware registers

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_register *argp);`

``int ioctl`(int fd, int request, const struct v4l2_register *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER

`argp`

## Description

> Experimental: This is an experimental interface and may change in the future.

For driver debugging purposes these ioctls allow test applications to access hardware registers directly. Regular applications should not use them.

Since writing or even reading registers can jeopardize the system security, its stability and damage the hardware, both ioctls require superuser privileges. Additionally the Linux kernel must be compiled with the `CONFIG_VIDEO_ADV_DEBUG` option to enable these ioctls.

To write a register applications must initialize all fields of a struct v4l2_register and call `VIDIOC_DBG_S_REGISTER` with a pointer to this structure. The `match_type` and `match_chip` fields select a chip on the TV card, the `reg` field specifies a register number and the `val` field the value to be written into the register.

To read a register applications must initialize the `match_type`, `match_chip` and `reg` fields, and call `VIDIOC_DBG_G_REGISTER` with a pointer to this structure. On success the driver stores the register value in the `val` field. On failure the structure remains unchanged.

When `match_type` is `V4L2_CHIP_MATCH_HOST`, `match_chip` selects the nth non-I2C chip on the TV card. Drivers may also interpret `match_chip` as a random ID, but we recommend against that. The number zero always selects the host chip, e. g. the chip connected to the PCI bus. You can find out which chips are present with the `VIDIOC_G_CHIP_IDENT` ioctl.

When `match_type` is `V4L2_CHIP_MATCH_I2C_DRIVER`, `match_chip` contains a driver ID as defined in the `linux/i2c-id.h` header file. For instance `I2C_DRIVERID_SAA7127` will match any chip supported by the saa7127 driver, regardless of its I2C bus address. When multiple chips supported by the same driver are present, the effect of these ioctls is undefined. Again with the `VIDIOC_G_CHIP_IDENT` ioctl you can find out which I2C chips are present.

When `match_type` is `V4L2_CHIP_MATCH_I2C_ADDR`, `match_chip` selects a chip by its 7 bit I2C bus address.

> Success not guaranteed: Due to a flaw in the Linux I2C bus driver these ioctls may return successfully without actually reading or writing a register. To catch the most likely failure we recommend a `VIDIOC_G_CHIP_IDENT` call confirming the presence of the selected I2C chip.

These ioctls are optional, not all drivers may support them. However when a driver supports these ioctls it must also support `VIDIOC_G_CHIP_IDENT`. Conversely it may support `VIDIOC_G_CHIP_IDENT` but not these ioctls.

`VIDIOC_DBG_G_REGISTER` and `VIDIOC_DBG_S_REGISTER` were introduced in Linux 2.6.21.

We recommended the v4l2-dbg utility over calling these ioctls directly. It is available from the LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for access instructions.

Table 1. struct `v4l2_register`

__u32 | `match_type` | See Table 2 for a list of possible types. |
__u32 | `match_chip` | Match a chip by this number, interpreted according to the `match_type` field. |
__u64 | `reg` | A register number. |
__u64 | `val` | The value read from, or to be written into the register. |

Table 2. Chip Match Types

`V4L2_CHIP_MATCH_HOST` | 0 | Match the nth chip on the card, zero for the host chip. Does not match I2C chips.
`V4L2_CHIP_MATCH_I2C_DRIVER` | 1 | Match an I2C chip by its driver ID from the `linux/i2c-id.h` header file.
`V4L2_CHIP_MATCH_I2C_ADDR` | 2 | Match a chip by its 7 bit I2C bus address.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The driver does not support this ioctl, or the kernel was not compiled with the `CONFIG_VIDEO_ADV_DEBUG` option, or the `match_type` is invalid, or the selected chip or register does not exist.

EPERM

  Insufficient permissions. Root privileges are required to execute these ioctls.

# ioctl VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD

## Name

VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD -- Execute an encoder command

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_encoder_cmd *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD

`argp`

## Description

> Experimental: This is an experimental interface and may change in the future.

These ioctls control an audio/video (usually MPEG-) encoder. `VIDIOC_ENCODER_CMD` sends a command to the encoder, `VIDIOC_TRY_ENCODER_CMD` can be used to try a command without actually executing it.

To send a command applications must initialize all fields of a struct v4l2_encoder_cmd and call `VIDIOC_ENCODER_CMD` or `VIDIOC_TRY_ENCODER_CMD` with a pointer to this structure.

The `cmd` field must contain the command code. The `flags` field is currently only used by the STOP command and contains one bit: If the `V4L2_ENC_CMD_STOP_AT_GOP_END` flag is set, encoding will continue until the end of the current Group Of Pictures, otherwise it will stop immediately.

A `read`() call sends a START command to the encoder if it has not been started yet. After a STOP command, `read`() calls will read the remaining data buffered by the driver. When the buffer is empty, `read`() will return zero and the next `read`() call will restart the encoder.

A `close`() call sends an immediate STOP to the encoder, and all buffered data is discarded.

These ioctls are optional, not all drivers may support them. They were introduced in Linux 2.6.21.

Table 1. struct `v4l2_encoder_cmd`

__u32 | `cmd` | The encoder command, see Table 2.
__u32 | `flags` | Flags to go with the command, see Table 3. If no flags are defined for this command, drivers and applications must set this field to zero.
__u32 | `data`[8] | Reserved for future extensions. Drivers and applications must set the array to zero.

Table 2. Encoder Commands

`V4L2_ENC_CMD_START` | 0 | Start the encoder. When the encoder is already running or paused, this command does nothing. No flags are defined for this command.
`V4L2_ENC_CMD_STOP` | 1 | Stop the encoder. When the `V4L2_ENC_CMD_STOP_AT_GOP_END` flag is set, encoding will continue until the end of the current Group Of Pictures, otherwise encoding will stop immediately. When the encoder is already stopped, this command does nothing.
`V4L2_ENC_CMD_PAUSE` | 2 | Pause the encoder. When the encoder has not been started yet, the driver will return an EPERM error code. When the encoder is already paused, this command does nothing. No flags are defined for this command.
`V4L2_ENC_CMD_RESUME` | 3 | Resume encoding after a PAUSE command. When the encoder has not been started yet, the driver will return an EPERM error code. When the encoder is already running, this command does nothing. No flags are defined for this command.

Table 3. Encoder Command Flags

`V4L2_ENC_CMD_STOP_AT_GOP_END` | 0x0001 | Stop encoding at the end of the current Group Of Pictures, rather than immediately.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The driver does not support this ioctl, or the `cmd` field is invalid.

EPERM

  The application sent a PAUSE or RESUME command when the encoder was not running.

# ioctl VIDIOC_ENUMAUDIO

## Name

VIDIOC_ENUMAUDIO -- Enumerate audio inputs

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_audio *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUMAUDIO

`argp`

## Description

To query the attributes of an audio input applications initialize the `index` field and zero out the `reserved` array of a struct v4l2_audio and call the `VIDIOC_ENUMAUDIO` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all audio inputs applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

See ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO(2) for a description of struct v4l2_audio.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The number of the audio input is out of bounds, or there are no audio inputs at all and this ioctl is not supported.

# ioctl VIDIOC_ENUMAUDOUT

## Name

VIDIOC_ENUMAUDOUT -- Enumerate audio outputs

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_audioout *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUMAUDOUT

`argp`

## Description

To query the attributes of an audio output applications initialize the `index` field and zero out the `reserved` array of a struct v4l2_audioout and call the `VIDIOC_G_AUDOUT` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all audio outputs applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

Note connectors on a TV card to loop back the received audio signal to a sound card are not audio outputs in this sense.

See ioctl VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT(2) for a description of struct v4l2_audioout.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The number of the audio output is out of bounds, or there are no audio outputs at all and this ioctl is not supported.

# ioctl VIDIOC_ENUM_FMT

## Name

VIDIOC_ENUM_FMT -- Enumerate image formats

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_fmtdesc *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUM_FMT

`argp`

## Description

To enumerate image formats applications initialize the `type` and `index` field of struct v4l2_fmtdesc and call the `VIDIOC_ENUM_FMT` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code. All formats are enumerable by beginning at index zero and incrementing by one until EINVAL is returned.

Table 1. struct `v4l2_fmtdesc`

__u32 | `index` | Number of the format in the enumeration, set by the application. This is in no way related to the `pixelformat` field.
enum v4l2_buf_type | `type` | Type of the data stream, set by the application. Only these types are valid here: `V4L2_BUF_TYPE_VIDEO_CAPTURE`, `V4L2_BUF_TYPE_VIDEO_OUTPUT`, `V4L2_BUF_TYPE_VIDEO_OVERLAY`, and custom (driver defined) types with code `V4L2_BUF_TYPE_PRIVATE` and higher.
__u32 | `flags` | See Table 2
__u8 | `description`[32] | Description of the format, a NUL-terminated ASCII string. This information is intended for the user, for example: "YUV 4:2:2".
__u32 | `pixelformat` | The image format identifier. This is a four character code as computed by the v4l2_fourcc() macro:
    #define v4l2_fourcc(a,b,c,d) (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
Several image formats are already defined by this specification in Chapter 2. Note these codes are not the same as those used in the Windows world.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers must set the array to zero.

Table 2. Image Format Description Flags

`V4L2_FMT_FLAG_COMPRESSED` | 0x0001 | This is a compressed format.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_fmtdesc `type` is not supported or the `index` is out of bounds.

# ioctl VIDIOC_ENUM_FRAMESIZES

## Name

VIDIOC_ENUM_FRAMESIZES -- Enumerate frame sizes

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_frmsizeenum *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUM_FRAMESIZES

`argp`

  Pointer to a struct v4l2_frmsizeenum that contains an index and pixel format and receives a frame width and height.

## Description

> Experimental: This is an experimental interface and may change in the future.

This ioctl allows applications to enumerate all frame sizes (i. e. width and height in pixels) that the device supports for the given pixel format.

The supported pixel formats can be obtained by using the `VIDIOC_ENUM_FMT` function.

The return value and the content of the `v4l2_frmsizeenum.type` field depend on the type of frame sizes the device supports. Here are the semantics of the function for the different cases:

- Discrete: The function returns success if the given index value (zero-based) is valid. The application should increase the index by one for each call until `EINVAL` is returned. The `v4l2_frmsizeenum.type` field is set to `V4L2_FRMSIZE_TYPE_DISCRETE` by the driver. Of the union only the `discrete` member is valid.

- Step-wise: The function returns success if the given index value is zero and `EINVAL` for any other index value. The `v4l2_frmsizeenum.type` field is set to `V4L2_FRMSIZE_TYPE_STEPWISE` by the driver. Of the union only the `stepwise` member is valid.

- Continuous: This is a special case of the step-wise type above. The function returns success if the given index value is zero and `EINVAL` for any other index value. The `v4l2_frmsizeenum.type` field is set to `V4L2_FRMSIZE_TYPE_CONTINUOUS` by the driver. Of the union only the `stepwise` member is valid and the `step_width` and `step_height` values are set to 1.

When the application calls the function with index zero, it must check the `type` field to determine the type of frame size enumeration the device supports. Only for the `V4L2_FRMSIZE_TYPE_DISCRETE` type does it make sense to increase the index value to receive more frame sizes.

Note that the order in which the frame sizes are returned has no special meaning. In particular does it not say anything about potential default format sizes.

Applications can assume that the enumeration data does not change without any interaction from the application itself. This means that the enumeration data is consistent if the application does not perform any other ioctl calls while it runs the frame size enumeration.

## Structs

In the structs below, IN denotes a value that has to be filled in by the application, OUT denotes values that the driver fills in. The application should zero out all members except for the IN fields.

Table 1. struct `v4l2_frmsize_discrete`

__u32 | `width` | Width of the frame [pixel].
__u32 | `height` | Height of the frame [pixel].

Table 2. struct `v4l2_frmsize_stepwise`

__u32 | `min_width` | Minimum frame width [pixel].
__u32 | `max_width` | Maximum frame width [pixel].
__u32 | `step_width` | Frame width step size [pixel].
__u32 | `min_height` | Minimum frame height [pixel].
__u32 | `max_height` | Maximum frame height [pixel].
__u32 | `step_height` | Frame height step size [pixel].

Table 3. struct `v4l2_frmsizeenum`

__u32 | `index` |  | IN: Index of the given frame size in the enumeration.
__u32 | `pixel_format` |  | IN: Pixel format for which the frame sizes are enumerated.
__u32 | `type` |  | OUT: Frame size type the device supports.
union |  |  | OUT: Frame size with the given index.
| struct v4l2_frmsize_discrete | `discrete` |
| struct v4l2_frmsize_stepwise | `stepwise` |
__u32 | `reserved[2]` |  | Reserved space for future use.

## Enums

Table 4. enum `v4l2_frmsizetypes`

`V4L2_FRMSIZE_TYPE_DISCRETE` | 1 | Discrete frame size.
`V4L2_FRMSIZE_TYPE_CONTINUOUS` | 2 | Continuous frame size.
`V4L2_FRMSIZE_TYPE_STEPWISE` | 3 | Step-wise defined frame size.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

See the description section above for a list of return values that `errno` can have.

# ioctl VIDIOC_ENUM_FRAMEINTERVALS

## Name

VIDIOC_ENUM_FRAMEINTERVALS -- Enumerate frame intervals

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_frmivalenum *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUM_FRAMEINTERVALS

`argp`

  Pointer to a struct v4l2_frmivalenum structure that contains a pixel format and size and receives a frame interval.

## Description

This ioctl allows applications to enumerate all frame intervals that the device supports for the given pixel format and frame size.

The supported pixel formats and frame sizes can be obtained by using the `VIDIOC_ENUM_FMT` and `VIDIOC_ENUM_FRAMESIZES` functions.

The return value and the content of the `v4l2_frmivalenum.type` field depend on the type of frame intervals the device supports. Here are the semantics of the function for the different cases:

- Discrete: The function returns success if the given index value (zero-based) is valid. The application should increase the index by one for each call until `EINVAL` is returned. The `v4l2_frmivalenum.type` field is set to `V4L2_FRMIVAL_TYPE_DISCRETE` by the driver. Of the union only the `discrete` member is valid.

- Step-wise: The function returns success if the given index value is zero and `EINVAL` for any other index value. The `v4l2_frmivalenum.type` field is set to `V4L2_FRMIVAL_TYPE_STEPWISE` by the driver. Of the union only the `stepwise` member is valid.

- Continuous: This is a special case of the step-wise type above. The function returns success if the given index value is zero and `EINVAL` for any other index value. The `v4l2_frmivalenum.type` field is set to `V4L2_FRMIVAL_TYPE_CONTINUOUS` by the driver. Of the union only the `stepwise` member is valid and the `step` value is set to 1.

When the application calls the function with index zero, it must check the `type` field to determine the type of frame interval enumeration the device supports. Only for the `V4L2_FRMIVAL_TYPE_DISCRETE` type does it make sense to increase the index value to receive more frame intervals.

Note that the order in which the frame intervals are returned has no special meaning. In particular does it not say anything about potential default frame intervals.

Applications can assume that the enumeration data does not change without any interaction from the application itself. This means that the enumeration data is consistent if the application does not perform any other ioctl calls while it runs the frame interval enumeration.

## Notes

- Frame intervals and frame rates: The V4L2 API uses frame intervals instead of frame rates. Given the frame interval the frame rate can be computed as follows:

      frame_rate = 1 / frame_interval

## Structs

In the structs below, IN denotes a value that has to be filled in by the application, OUT denotes values that the driver fills in. The application should zero out all members except for the IN fields.

Table 1. struct `v4l2_frmival_stepwise`

struct v4l2_fract | `min` | Minimum frame interval [s].
struct v4l2_fract | `max` | Maximum frame interval [s].
struct v4l2_fract | `step` | Frame interval step size [s].

Table 2. struct `v4l2_frmivalenum`

__u32 | `index` |  | IN: Index of the given frame interval in the enumeration.
__u32 | `pixel_format` |  | IN: Pixel format for which the frame intervals are enumerated.
__u32 | `width` |  | IN: Frame width for which the frame intervals are enumerated.
__u32 | `height` |  | IN: Frame height for which the frame intervals are enumerated.
__u32 | `type` |  | OUT: Frame interval type the device supports.
union |  |  | OUT: Frame interval with the given index.
| struct v4l2_fract | `discrete` | Frame interval [s].
| struct v4l2_frmival_stepwise | `stepwise` |
__u32 | `reserved[2]` |  | Reserved space for future use.

## Enums

Table 3. enum `v4l2_frmivaltypes`

`V4L2_FRMIVAL_TYPE_DISCRETE` | 1 | Discrete frame interval.
`V4L2_FRMIVAL_TYPE_CONTINUOUS` | 2 | Continuous frame interval.
`V4L2_FRMIVAL_TYPE_STEPWISE` | 3 | Step-wise defined frame interval.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

See the description section above for a list of return values that `errno` can have.

# ioctl VIDIOC_ENUMINPUT

## Name

VIDIOC_ENUMINPUT -- Enumerate video inputs

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_input *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUMINPUT

`argp`

## Description

To query the attributes of a video input applications initialize the `index` field of struct v4l2_input and call the `VIDIOC_ENUMINPUT` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all inputs applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

Table 1. struct `v4l2_input`

__u32 | `index` | Identifies the input, set by the application.
__u8 | `name`[32] | Name of the video input, a NUL-terminated ASCII string, for example: "Vin (Composite 2)". This information is intended for the user, preferably the connector label on the device itself.
__u32 | `type` | Type of the input, see Table 2.
__u32 | `audioset` | Drivers can enumerate up to 32 video and audio inputs. This field shows which audio inputs were selectable as audio source if this was the currently selected video input. It is a bit mask. The LSB corresponds to audio input 0, the MSB to input 31. Any number of bits can be set, or none. When the driver does not enumerate audio inputs no bits must be set. Applications shall not interpret this as lack of audio support. Some drivers automatically select audio sources and do not enumerate them since there is no choice anyway. For details on audio inputs and how to select the current input see Section 1.5.
__u32 | `tuner` | Capture devices can have zero or more tuners (RF demodulators). When the `type` is set to `V4L2_INPUT_TYPE_TUNER` this is an RF connector and this field identifies the tuner. It corresponds to struct v4l2_tuner field `index`. For details on tuners see Section 1.6.
v4l2_std_id | `std` | Every video input supports one or more different video standards. This field is a set of all supported standards. For details on video standards and how to switch see Section 1.7.
__u32 | `status` | This field provides status information about the input. See Table 3 for flags. `status` is only valid when this is the current input.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers must set the array to zero.

Table 2. Input Types

`V4L2_INPUT_TYPE_TUNER` | 1 | This input uses a tuner (RF demodulator).
`V4L2_INPUT_TYPE_CAMERA` | 2 | Analog baseband input, for example CVBS / Composite Video, S-Video, RGB.

Table 3. Input Status Flags

General
`V4L2_IN_ST_NO_POWER` | 0x00000001 | Attached device is off.
`V4L2_IN_ST_NO_SIGNAL` | 0x00000002 |
`V4L2_IN_ST_NO_COLOR` | 0x00000004 | The hardware supports color decoding, but does not detect color modulation in the signal.
Analog Video
`V4L2_IN_ST_NO_H_LOCK` | 0x00000100 | No horizontal sync lock.
`V4L2_IN_ST_COLOR_KILL` | 0x00000200 | A color killer circuit automatically disables color decoding when it detects no color modulation. When this flag is set the color killer is enabled and has shut off color decoding.
Digital Video
`V4L2_IN_ST_NO_SYNC` | 0x00010000 | No synchronization lock.
`V4L2_IN_ST_NO_EQU` | 0x00020000 | No equalizer lock.
`V4L2_IN_ST_NO_CARRIER` | 0x00040000 | Carrier recovery failed.
VCR and Set-Top Box
`V4L2_IN_ST_MACROVISION` | 0x01000000 | Macrovision is an analog copy prevention system mangling the video signal to confuse video recorders. When this flag is set Macrovision has been detected.
`V4L2_IN_ST_NO_ACCESS` | 0x02000000 | Conditional access denied.
`V4L2_IN_ST_VTR` | 0x04000000 | VTR time constant. [?]

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_input `index` is out of bounds.

# ioctl VIDIOC_ENUMOUTPUT

## Name

VIDIOC_ENUMOUTPUT -- Enumerate video outputs

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_output *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUMOUTPUT

`argp`

## Description

To query the attributes of a video outputs applications initialize the `index` field of struct v4l2_output and call the `VIDIOC_ENUMOUTPUT` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all outputs applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

Table 1. struct `v4l2_output`

__u32 | `index` | Identifies the output, set by the application.
__u8 | `name`[32] | Name of the video output, a NUL-terminated ASCII string, for example: "Vout". This information is intended for the user, preferably the connector label on the device itself.
__u32 | `type` | Type of the output, see Table 2.
__u32 | `audioset` | Drivers can enumerate up to 32 video and audio outputs. This field shows which audio outputs were selectable as the current output if this was the currently selected video output. It is a bit mask. The LSB corresponds to audio output 0, the MSB to output 31. Any number of bits can be set, or none. When the driver does not enumerate audio outputs no bits must be set. Applications shall not interpret this as lack of audio support. Drivers may automatically select audio outputs without enumerating them. For details on audio outputs and how to select the current output see Section 1.5.
__u32 | `modulator` | Output devices can have zero or more RF modulators. When the `type` is `V4L2_OUTPUT_TYPE_MODULATOR` this is an RF connector and this field identifies the modulator. It corresponds to struct v4l2_modulator field `index`. For details on modulators see Section 1.6.
v4l2_std_id | `std` | Every video output supports one or more different video standards. This field is a set of all supported standards. For details on video standards and how to switch see Section 1.7.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers must set the array to zero.

Table 2. Output Type

`V4L2_OUTPUT_TYPE_MODULATOR` | 1 | This output is an analog TV modulator.
`V4L2_OUTPUT_TYPE_ANALOG` | 2 | Analog baseband output, for example Composite / CVBS, S-Video, RGB.
`V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY` | 3 | [?]

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_output `index` is out of bounds.

# ioctl VIDIOC_ENUMSTD

## Name

VIDIOC_ENUMSTD -- Enumerate supported video standards

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_standard *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_ENUMSTD

`argp`

## Description

To query the attributes of a video standard, especially a custom (driver defined) one, applications initialize the `index` field of struct v4l2_standard and call the `VIDIOC_ENUMSTD` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all standards applications shall begin at index zero, incrementing by one until the driver returns EINVAL. Drivers may enumerate a different set of standards after switching the video input or output.[23]

Table 1. struct `v4l2_standard`

__u32 | `index` | Number of the video standard, set by the application.
v4l2_std_id | `id` | The bits in this field identify the standard as one of the common standards listed in Table 3, or if bits 32 to 63 are set as custom standards. Multiple bits can be set if the hardware does not distinguish between these standards, however separate indices do not indicate the opposite. The `id` must be unique. No other enumerated `v4l2_standard` structure, for this input or output anyway, can contain the same set of bits.
__u8 | `name`[24] | Name of the standard, a NUL-terminated ASCII string, for example: "PAL-B/G", "NTSC Japan". This information is intended for the user.
struct v4l2_fract | `frameperiod` | The frame period (not field period) is numerator / denominator. For example M/NTSC has a frame period of 1001 / 30000 seconds.
__u32 | `framelines` | Total lines per frame including blanking, e. g. 625 for B/PAL.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers must set the array to zero.

Table 2. struct `v4l2_fract`

__u32 | `numerator` |
__u32 | `denominator` |

Table 3. typedef `v4l2_std_id`

__u64 | `v4l2_std_id` | This type is a set, each bit representing another video standard as listed below and in Table 4. The 32 most significant bits are reserved for custom (driver defined) video standards.

    #define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
    #define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
    #define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
    #define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
    #define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
    #define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
    #define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
    #define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)

    #define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
    #define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
    #define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
    #define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)

`V4L2_STD_PAL_60` is a hybrid standard with 525 lines, 60 Hz refresh rate, and PAL color modulation with a 4.43 MHz color subcarrier. Some PAL video recorders can play back NTSC tapes in this mode for display on a 50/60 Hz agnostic PAL TV.

    #define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
    #define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
    #define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)

`V4L2_STD_NTSC_443` is a hybrid standard with 525 lines, 60 Hz refresh rate, and NTSC color modulation with a 4.43 MHz color subcarrier.

    #define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)

    #define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
    #define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
    #define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
    #define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
    #define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
    #define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
    #define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
    #define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)

    /* ATSC/HDTV */
    #define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
    #define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)

`V4L2_STD_ATSC_8_VSB` and `V4L2_STD_ATSC_16_VSB` are U.S. terrestrial digital TV standards. Presently the V4L2 API does not support digital TV. See also the Linux DVB API at http://linuxtv.org.

    #define V4L2_STD_PAL_BG         (V4L2_STD_PAL_B         |\
                                     V4L2_STD_PAL_B1        |\
                                     V4L2_STD_PAL_G)
    #define V4L2_STD_B              (V4L2_STD_PAL_B         |\
                                     V4L2_STD_PAL_B1        |\
                                     V4L2_STD_SECAM_B)
    #define V4L2_STD_GH             (V4L2_STD_PAL_G         |\
                                     V4L2_STD_PAL_H         |\
                                     V4L2_STD_SECAM_G       |\
                                     V4L2_STD_SECAM_H)
    #define V4L2_STD_PAL_DK         (V4L2_STD_PAL_D         |\
                                     V4L2_STD_PAL_D1        |\
                                     V4L2_STD_PAL_K)
    #define V4L2_STD_PAL            (V4L2_STD_PAL_BG        |\
                                     V4L2_STD_PAL_DK        |\
                                     V4L2_STD_PAL_H         |\
                                     V4L2_STD_PAL_I)
    #define V4L2_STD_NTSC           (V4L2_STD_NTSC_M        |\
                                     V4L2_STD_NTSC_M_JP     |\
                                     V4L2_STD_NTSC_M_KR)
    #define V4L2_STD_MN             (V4L2_STD_PAL_M         |\
                                     V4L2_STD_PAL_N         |\
                                     V4L2_STD_PAL_Nc        |\
                                     V4L2_STD_NTSC)
    #define V4L2_STD_SECAM_DK       (V4L2_STD_SECAM_D       |\
                                     V4L2_STD_SECAM_K       |\
                                     V4L2_STD_SECAM_K1)
    #define V4L2_STD_DK             (V4L2_STD_PAL_DK        |\
                                     V4L2_STD_SECAM_DK)

    #define V4L2_STD_SECAM          (V4L2_STD_SECAM_B       |\
                                     V4L2_STD_SECAM_G       |\
                                     V4L2_STD_SECAM_H       |\
                                     V4L2_STD_SECAM_DK      |\
                                     V4L2_STD_SECAM_L       |\
                                     V4L2_STD_SECAM_LC)

    #define V4L2_STD_525_60         (V4L2_STD_PAL_M         |\
                                     V4L2_STD_PAL_60        |\
                                     V4L2_STD_NTSC          |\
                                     V4L2_STD_NTSC_443)
    #define V4L2_STD_625_50         (V4L2_STD_PAL           |\
                                     V4L2_STD_PAL_N         |\
                                     V4L2_STD_PAL_Nc        |\
                                     V4L2_STD_SECAM)

    #define V4L2_STD_UNKNOWN        0
    #define V4L2_STD_ALL            (V4L2_STD_525_60        |\
                                     V4L2_STD_625_50)

Table 4. Video Standards (based on [ITU BT.470])

Characteristics | M/NTSCa | M/PAL | N/PALb | B, B1, G/PAL | D, D1, K/PAL | H/PAL | I/PAL | B, G/SECAM | D, K/SECAM | K1/SECAM | L/SECAM
--- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | ---
Frame lines | 525 | 625
Frame period (s) | 1001/30000 | 1/25
Chrominance sub-carrier frequency (Hz) | 3579545 ± 10 | 3579611.49 ± 10 | 4433618.75 ± 5 (3582056.25 ± 5) | 4433618.75 ± 5 | 4433618.75 ± 1 | fOR = 4406250 ± 2000, fOB = 4250000 ± 2000
Nominal radio-frequency channel bandwidth (MHz) | 6 | 6 | 6 | B: 7; B1, G: 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8
Sound carrier relative to vision carrier (MHz) | + 4.5 | + 4.5 | + 4.5 | + 5.5 ± 0.001 c d e f | + 6.5 ± 0.001 | + 5.5 | + 5.9996 ± 0.0005 | + 5.5 ± 0.001 | + 6.5 ± 0.001 | + 6.5 | + 6.5 g
Notes: a. Japan uses a standard similar to M/NTSC (V4L2_STD_NTSC_M_JP). b. The values in brackets apply to the combination N/PAL a.k.a. NC used in Argentina (V4L2_STD_PAL_Nc). c. In the Federal Republic of Germany, Austria, Italy, the Netherlands, Slovakia and Switzerland a system of two sound carriers is used, the frequency of the second carrier being 242.1875 kHz above the frequency of the first sound carrier. For stereophonic sound transmissions a similar system is used in Australia. d. New Zealand uses a sound carrier displaced 5.4996 ± 0.0005 MHz from the vision carrier. e. In Denmark, Finland, New Zealand, Sweden and Spain a system of two sound carriers is used. In Iceland, Norway and Poland the same system is being introduced. The second carrier is 5.85 MHz above the vision carrier and is DQPSK modulated with 728 kbit/s sound and data multiplex. (NICAM system) f. In the United Kingdom, a system of two sound carriers is used. The second sound carrier is 6.552 MHz above the vision carrier and is DQPSK modulated with a 728 kbit/s sound and data multiplex able to carry two sound channels. (NICAM system) g. In France, a digital carrier 5.85 MHz away from the vision carrier may be used in addition to the main sound carrier. It is modulated in differentially encoded QPSK with a 728 kbit/s sound and data multiplexer capable of carrying two sound channels. (NICAM system)

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_standard `index` is out of bounds.

# ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO

## Name

VIDIOC_G_AUDIO, VIDIOC_S_AUDIO -- Query or select the current audio input and its attributes

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_audio *argp);`

``int ioctl`(int fd, int request, const struct v4l2_audio *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_AUDIO, VIDIOC_S_AUDIO

`argp`

## Description

To query the current audio input applications zero out the `reserved` array of a struct v4l2_audio and call the `VIDIOC_G_AUDIO` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the device has no audio inputs, or none which combine with the current video input.

Audio inputs have one writable property, the audio mode. To select the current audio input and change the audio mode, applications initialize the `index` and `mode` fields, and the `reserved` array of a `v4l2_audio` structure and call the `VIDIOC_S_AUDIO` ioctl. Drivers may switch to a different audio mode if the request cannot be satisfied. However, this is a write-only ioctl, it does not return the actual new audio mode.

Table 1. struct `v4l2_audio`

__u32 | `index` | Identifies the audio input, set by the driver or application.
__u8 | `name`[32] | Name of the audio input, a NUL-terminated ASCII string, for example: "Line In". This information is intended for the user, preferably the connector label on the device itself.
__u32 | `capability` | Audio capability flags, see Table 2.
__u32 | `mode` | Audio mode flags set by drivers and applications (on `VIDIOC_S_AUDIO` ioctl), see Table 3.
__u32 | `reserved`[2] | Reserved for future extensions. Drivers and applications must set the array to zero.

Table 2. Audio Capability Flags

`V4L2_AUDCAP_STEREO` | 0x00001 | This is a stereo input. The flag is intended to automatically disable stereo recording etc. when the signal is always monaural. The API provides no means to detect if stereo is received, unless the audio input belongs to a tuner.
`V4L2_AUDCAP_AVL` | 0x00002 | Automatic Volume Level mode is supported.

Table 3. Audio Mode Flags

`V4L2_AUDMODE_AVL` | 0x00001 | AVL mode is on.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  No audio inputs combine with the current video input, or the number of the selected audio input is out of bounds or it does not combine, or there are no audio inputs at all and the ioctl is not supported.

EBUSY

  I/O is in progress, the input cannot be switched.

# ioctl VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT

## Name

VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT -- Query or select the current audio output

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_audioout *argp);`

``int ioctl`(int fd, int request, const struct v4l2_audioout *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT

`argp`

## Description

To query the current audio output applications zero out the `reserved` array of a struct v4l2_audioout and call the `VIDIOC_G_AUDOUT` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the device has no audio inputs, or none which combine with the current video output.

Audio outputs have no writable properties. Nevertheless, to select the current audio output applications can initialize the `index` field and `reserved` array (which in the future may contain writable properties) of a `v4l2_audioout` structure and call the `VIDIOC_S_AUDOUT` ioctl. Drivers switch to the requested output or return the EINVAL error code when the index is out of bounds. This is a write-only ioctl, it does not return the current audio output attributes as `VIDIOC_G_AUDOUT` does.

Note connectors on a TV card to loop back the received audio signal to a sound card are not audio outputs in this sense.

Table 1. struct `v4l2_audioout`

__u32 | `index` | Identifies the audio output, set by the driver or application.
__u8 | `name`[32] | Name of the audio output, a NUL-terminated ASCII string, for example: "Line Out". This information is intended for the user, preferably the connector label on the device itself.
__u32 | `capability` | Audio capability flags, none defined yet. Drivers must set this field to zero.
__u32 | `mode` | Audio mode, none defined yet. Drivers and applications (on `VIDIOC_S_AUDOUT`) must set this field to zero.
__u32 | `reserved`[2] | Reserved for future extensions. Drivers and applications must set the array to zero.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  No audio outputs combine with the current video output, or the number of the selected audio output is out of bounds or it does not combine, or there are no audio outputs at all and the ioctl is not supported.

EBUSY

  I/O is in progress, the output cannot be switched.

# ioctl VIDIOC_G_CHIP_IDENT

## Name

VIDIOC_G_CHIP_IDENT -- Identify the chips on a TV card

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_chip_ident *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_CHIP_IDENT

`argp`

## Description

> Experimental: This is an experimental interface and may change in the future.

For driver debugging purposes this ioctl allows test applications to query the driver about the chips present on the TV card. Regular applications should not use it. When you found a chip specific bug, please contact the Video4Linux mailing list (https://listman.redhat.com/mailman/listinfo/video4linux-list) so it can be fixed.

To query the driver applications must initialize the `match_type` and `match_chip` fields of a struct v4l2_chip_ident and call `VIDIOC_G_CHIP_IDENT` with a pointer to this structure. On success the driver stores information about the selected chip in the `ident` and `revision` fields. On failure the structure remains unchanged.

When `match_type` is `V4L2_CHIP_MATCH_HOST`, `match_chip` selects the nth non-I2C chip on the TV card. You can enumerate all chips by starting at zero and incrementing `match_chip` by one until `VIDIOC_G_CHIP_IDENT` fails with an EINVAL error code. Drivers may also interpret `match_chip` as a random ID, but we recommend against that. The number zero always selects the host chip, e. g. the chip connected to the PCI bus.

When `match_type` is `V4L2_CHIP_MATCH_I2C_DRIVER`, `match_chip` contains a driver ID as defined in the `linux/i2c-id.h` header file. For instance `I2C_DRIVERID_SAA7127` will match any chip supported by the saa7127 driver, regardless of its I2C bus address. When multiple chips supported by the same driver are present, the ioctl will return `V4L2_IDENT_AMBIGUOUS` in the `ident` field.

When `match_type` is `V4L2_CHIP_MATCH_I2C_ADDR`, `match_chip` selects a chip by its 7 bit I2C bus address.

On success, the `ident` field will contain a chip ID from the Linux `media/v4l2-chip-ident.h` header file, and the `revision` field will contain a driver specific value, or zero if no particular revision is associated with this chip.

When the driver could not identify the selected chip, `ident` will contain `V4L2_IDENT_UNKNOWN`. When no chip matched `match_type` and `match_chip`, the ioctl will succeed but the `ident` field will contain `V4L2_IDENT_NONE`. If multiple chips matched, `ident` will contain `V4L2_IDENT_AMBIGUOUS`. In all these cases the `revision` field remains unchanged.

This ioctl is optional, not all drivers may support it. It was introduced in Linux 2.6.21.

We recommended the v4l2-dbg utility over calling this ioctl directly. It is available from the LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for access instructions.

Table 1. struct `v4l2_chip_ident`

__u32 | `match_type` | See Table 2 for a list of possible types.
__u32 | `match_chip` | Match a chip by this number, interpreted according to the `match_type` field.
__u32 | `ident` | A chip identifier as defined in the Linux `media/v4l2-chip-ident.h` header file, or one of the values from Table 3.
__u32 | `revision` | A chip revision, chip and driver specific.

Table 2. Chip Match Types

`V4L2_CHIP_MATCH_HOST` | 0 | Match the nth chip on the card, zero for the host chip. Does not match I2C chips.
`V4L2_CHIP_MATCH_I2C_DRIVER` | 1 | Match an I2C chip by its driver ID from the `linux/i2c-id.h` header file.
`V4L2_CHIP_MATCH_I2C_ADDR` | 2 | Match a chip by its 7 bit I2C bus address.

Table 3. Chip Identifiers

`V4L2_IDENT_NONE` | 0 | No chip matched.
`V4L2_IDENT_AMBIGUOUS` | 1 | Multiple chips matched.
`V4L2_IDENT_UNKNOWN` | 2 | A chip is present at this address, but the driver could not identify it.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The driver does not support this ioctl, or the `match_type` is invalid.

# ioctl VIDIOC_G_CROP, VIDIOC_S_CROP

## Name

VIDIOC_G_CROP, VIDIOC_S_CROP -- Get or set the current cropping rectangle

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_crop *argp);`

``int ioctl`(int fd, int request, const struct v4l2_crop *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_CROP, VIDIOC_S_CROP

`argp`

## Description

To query the cropping rectangle size and position applications set the `type` field of a `v4l2_crop` structure to the respective buffer (stream) type and call the `VIDIOC_G_CROP` ioctl with a pointer to this structure. The driver fills the rest of the structure or returns the EINVAL error code if cropping is not supported.

To change the cropping rectangle applications initialize the `type` and struct v4l2_rect substructure named `c` of a v4l2_crop structure and call the `VIDIOC_S_CROP` ioctl with a pointer to this structure.

The driver first adjusts the requested dimensions against hardware limits, i. e. the bounds given by the capture/output window, and it rounds to the closest possible values of horizontal and vertical offset, width and height. In particular the driver must round the vertical offset of the cropping rectangle to frame lines modulo two, such that the field order cannot be confused.

Second the driver adjusts the image size (the opposite rectangle of the scaling process, source or target depending on the data direction) to the closest size possible while maintaining the current horizontal and vertical scaling factor.

Finally the driver programs the hardware with the actual cropping and image parameters. `VIDIOC_S_CROP` is a write-only ioctl, it does not return the actual parameters. To query them applications must call `VIDIOC_G_CROP` and `VIDIOC_G_FMT`. When the parameters are unsuitable the application may modify the cropping or image parameters and repeat the cycle until satisfactory parameters have been negotiated.

When cropping is not supported then no parameters are changed and `VIDIOC_S_CROP` returns the EINVAL error code.

Table 1. struct `v4l2_crop`

enum v4l2_buf_type | `type` | Type of the data stream, set by the application. Only these types are valid here: `V4L2_BUF_TYPE_VIDEO_CAPTURE`, `V4L2_BUF_TYPE_VIDEO_OUTPUT`, `V4L2_BUF_TYPE_VIDEO_OVERLAY`, and custom (driver defined) types with code `V4L2_BUF_TYPE_PRIVATE` and higher.
struct v4l2_rect | `c` | Cropping rectangle. The same co-ordinate system as for struct v4l2_cropcap `bounds` is used.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  Cropping is not supported.

# ioctl VIDIOC_G_CTRL, VIDIOC_S_CTRL

## Name

VIDIOC_G_CTRL, VIDIOC_S_CTRL -- Get or set the value of a control

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_control *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_CTRL, VIDIOC_S_CTRL

`argp`

## Description

To get the current value of a control applications initialize the `id` field of a struct `v4l2_control` and call the `VIDIOC_G_CTRL` ioctl with a pointer to this structure. To change the value of a control applications initialize the `id` and `value` fields of a struct `v4l2_control` and call the `VIDIOC_S_CTRL` ioctl.

When the `id` is invalid drivers return an EINVAL error code. When the `value` is out of bounds drivers can choose to take the closest valid value or return an ERANGE error code, whatever seems more appropriate. However, `VIDIOC_S_CTRL` is a write-only ioctl, it does not return the actual new value.

These ioctls work only with user controls. For other control classes the `VIDIOC_G_EXT_CTRLS`, `VIDIOC_S_EXT_CTRLS` or `VIDIOC_TRY_EXT_CTRLS` must be used.

Table 1. struct `v4l2_control`

__u32 | `id` | Identifies the control, set by the application.
__s32 | `value` | New value or current value.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_control `id` is invalid.

ERANGE

  The struct v4l2_control `value` is out of bounds.

EBUSY

  The control is temporarily not changeable, possibly because another applications took over control of the device function this control belongs to.

# ioctl VIDIOC_G_ENC_INDEX

## Name

VIDIOC_G_ENC_INDEX -- Get meta data about a compressed video stream

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_enc_idx *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_ENC_INDEX

`argp`

## Description

> Experimental: This is an experimental interface and may change in the future.

The `VIDIOC_G_ENC_INDEX` ioctl provides meta data about a compressed video stream the same or another application currently reads from the driver, which is useful for random access into the stream without decoding it.

To read the data applications must call `VIDIOC_G_ENC_INDEX` with a pointer to a struct v4l2_enc_idx. On success the driver fills the `entry` array, stores the number of elements written in the `entries` field, and initializes the `entries_cap` field.

Each element of the `entry` array contains meta data about one picture. A `VIDIOC_G_ENC_INDEX` call reads up to `V4L2_ENC_IDX_ENTRIES` entries from a driver buffer, which can hold up to `entries_cap` entries. This number can be lower or higher than `V4L2_ENC_IDX_ENTRIES`, but not zero. When the application fails to read the meta data in time the oldest entries will be lost. When the buffer is empty or no capturing/encoding is in progress, `entries` will be zero.

Currently this ioctl is only defined for MPEG-2 program streams and video elementary streams.

Table 1. struct `v4l2_enc_idx`

__u32 | `entries` | The number of entries the driver stored in the `entry` array.
__u32 | `entries_cap` | The number of entries the driver can buffer. Must be greater than zero.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers must set the array to zero.
struct v4l2_enc_idx_entry | `entry`[`V4L2_ENC_IDX_ENTRIES`] | Meta data about a compressed video stream. Each element of the array corresponds to one picture, sorted in ascending order by their `offset`.

Table 2. struct `v4l2_enc_idx_entry`

__u64 | `offset` | The offset in bytes from the beginning of the compressed video stream to the beginning of this picture, that is a PES packet header as defined in ISO 13818-1 or a picture header as defined in ISO 13818-2. When the encoder is stopped, the driver resets the offset to zero.
__u64 | `pts` | The 33 bit Presentation Time Stamp of this picture as defined in ISO 13818-1.
__u32 | `length` | The length of this picture in bytes.
__u32 | `flags` | Flags containing the coding type of this picture, see Table 3.
__u32 | `reserved`[2] | Reserved for future extensions. Drivers must set the array to zero.

Table 3. Index Entry Flags

`V4L2_ENC_IDX_FRAME_I` | 0x00 | This is an Intra-coded picture.
`V4L2_ENC_IDX_FRAME_P` | 0x01 | This is a Predictive-coded picture.
`V4L2_ENC_IDX_FRAME_B` | 0x02 | This is a Bidirectionally predictive-coded picture.
`V4L2_ENC_IDX_FRAME_MASK` | 0x0F | AND the flags field with this mask to obtain the picture coding type.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The driver does not support this ioctl.

# ioctl VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS

## Name

VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS -- Get or set the value of several controls, try control values

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_ext_controls *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS

`argp`

## Description

These ioctls allow the caller to get or set multiple controls atomically. Control IDs are grouped into control classes (see Table 3) and all controls in the control array must belong to the same control class.

Applications must always fill in the `count`, `ctrl_class`, `controls` and `reserved` fields of struct v4l2_ext_controls, and initialize the struct v4l2_ext_control array pointed to by the `controls` fields.

To get the current value of a set of controls applications initialize the `id` field of each struct v4l2_ext_control and call the `VIDIOC_G_EXT_CTRLS` ioctl.

To change the value of a set of controls applications initialize the `id` and `value` fields of a struct v4l2_ext_control and call the `VIDIOC_S_EXT_CTRLS` ioctl. The controls will only be set if all control values are valid.

To check if the a set of controls have correct values applications initialize the `id` and `value` fields of a struct v4l2_ext_control and call the `VIDIOC_TRY_EXT_CTRLS` ioctl. It is up to the driver whether wrong values are automatically adjusted to a valid value or if an error is returned.

When the `id` or `ctrl_class` is invalid drivers return an EINVAL error code. When the value is out of bounds drivers can choose to take the closest valid value or return an ERANGE error code, whatever seems more appropriate. In the first case the new value is set in struct v4l2_ext_control.

The driver will only set/get these controls if all control values are correct. This prevents the situation where only some of the controls were set/get. Only low-level errors (e. g. a failed i2c command) can still cause this situation.

Table 1. struct `v4l2_ext_control`

__u32 | `id` |  | Identifies the control, set by the application.
__u32 | `reserved2`[2] |  | Reserved for future extensions. Drivers and applications must set the array to zero.
union | (anonymous) |  |
| __s32 | `value` | New value or current value.
| __s64 | `value64` | New value or current value.
| void * | `reserved` | Reserved for future pointer-type controls. Currently unused.

Table 2. struct `v4l2_ext_controls`

__u32 | `ctrl_class` | The control class to which all controls belong, see Table 3.
__u32 | `count` | The number of controls in the controls array. May also be zero.
__u32 | `error_idx` | Set by the driver in case of an error. It is the index of the control causing the error or equal to 'count' when the error is not associated with a particular control. Undefined when the ioctl returns 0 (success).
__u32 | `reserved`[2] | Reserved for future extensions. Drivers and applications must set the array to zero.
struct v4l2_ext_control * | `controls` | Pointer to an array of `count` v4l2_ext_control structures. Ignored if `count` equals zero.

Table 3. Control classes

`V4L2_CTRL_CLASS_USER` | 0x980000 | The class containing user controls. These controls are described in Section 1.8. All controls that can be set using the `VIDIOC_S_CTRL` and `VIDIOC_G_CTRL` ioctl belong to this class.
`V4L2_CTRL_CLASS_MPEG` | 0x990000 | The class containing MPEG compression controls. These controls are described in section Section 1.9.5.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_ext_control `id` is invalid or the struct v4l2_ext_controls `ctrl_class` is invalid. This error code is also returned by the `VIDIOC_S_EXT_CTRLS` and `VIDIOC_TRY_EXT_CTRLS` ioctls if two or more control values are in conflict.

ERANGE

  The struct v4l2_ext_control `value` is out of bounds.

EBUSY

  The control is temporarily not changeable, possibly because another applications took over control of the device function this control belongs to.

# ioctl VIDIOC_G_FBUF, VIDIOC_S_FBUF

## Name

VIDIOC_G_FBUF, VIDIOC_S_FBUF -- Get or set frame buffer overlay parameters

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_framebuffer *argp);`

``int ioctl`(int fd, int request, const struct v4l2_framebuffer *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_FBUF, VIDIOC_S_FBUF

`argp`

## Description

Applications can use the `VIDIOC_G_FBUF` and `VIDIOC_S_FBUF` ioctl to get and set the framebuffer parameters for a Video Overlay or Video Output Overlay (OSD). The type of overlay is implied by the device type (capture or output device) and can be determined with the `VIDIOC_QUERYCAP` ioctl. One `/dev/videoN` device must not support both kinds of overlay.

The V4L2 API distinguishes destructive and non-destructive overlays. A destructive overlay copies captured video images into the video memory of a graphics card. A non-destructive overlay blends video images into a VGA signal or graphics into a video signal. Video Output Overlays are always non-destructive.

To get the current parameters applications call the `VIDIOC_G_FBUF` ioctl with a pointer to a `v4l2_framebuffer` structure. The driver fills all fields of the structure or returns an EINVAL error code when overlays are not supported.

To set the parameters for a Video Output Overlay, applications must initialize the `flags` field of a struct `v4l2_framebuffer`. Since the framebuffer is implemented on the TV card all other parameters are determined by the driver. When an application calls `VIDIOC_S_FBUF` with a pointer to this structure, the driver prepares for the overlay and returns the framebuffer parameters as `VIDIOC_G_FBUF` does, or it returns an error code.

To set the parameters for a non-destructive Video Overlay, applications must initialize the `flags` field, the `fmt` substructure, and call `VIDIOC_S_FBUF`. Again the driver prepares for the overlay and returns the framebuffer parameters as `VIDIOC_G_FBUF` does, or it returns an error code.

For a destructive Video Overlay applications must additionally provide a `base` address. Setting up a DMA to a random memory location can jeopardize the system security, its stability or even damage the hardware, therefore only the superuser can set the parameters for a destructive video overlay.

Table 1. struct `v4l2_framebuffer`

__u32 | `capability` |  | Overlay capability flags set by the driver, see Table 2.
__u32 | `flags` |  | Overlay control flags set by application and driver, see Table 3
void * | `base` |  | Physical base address of the framebuffer, that is the address of the pixel in the top left corner of the framebuffer.a This field is irrelevant to non-destructive Video Overlays. For destructive Video Overlays applications must provide a base address. The driver may accept only base addresses which are a multiple of two, four or eight bytes. For Video Output Overlays the driver must return a valid base address, so applications can find the corresponding Linux framebuffer device (see Section 4.4).
struct v4l2_pix_format | `fmt` |  | Layout of the frame buffer. The `v4l2_pix_format` structure is defined in Chapter 2, for clarification the fields and acceptable values are listed below:
| __u32 | `width` | Width of the frame buffer in pixels.
| __u32 | `height` | Height of the frame buffer in pixels.
| __u32 | `pixelformat` | The pixel format of the framebuffer. For non-destructive Video Overlays this field only defines a format for the struct v4l2_window `chromakey` field. For destructive Video Overlays applications must initialize this field. For Video Output Overlays the driver must return a valid format. Usually this is an RGB format (for example `V4L2_PIX_FMT_RGB565`) but YUV formats (only packed YUV formats when chroma keying is used, not including `V4L2_PIX_FMT_YUYV` and `V4L2_PIX_FMT_UYVY`) and the `V4L2_PIX_FMT_PAL8` format are also permitted. The behavior of the driver when an application requests a compressed format is undefined. See Chapter 2 for information on pixel formats.
| enum v4l2_field | `field` | Drivers and applications shall ignore this field. If applicable, the field order is selected with the `VIDIOC_S_FMT` ioctl, using the `field` field of struct v4l2_window.
| __u32 | `bytesperline` | Distance in bytes between the leftmost pixels in two adjacent lines.
This field is irrelevant to non-destructive Video Overlays. For destructive Video Overlays both applications and drivers can set this field to request padding bytes at the end of each line. Drivers however may ignore the requested value, returning `width` times bytes-per-pixel or a larger value required by the hardware. That implies applications can just set this field to zero to get a reasonable default. For Video Output Overlays the driver must return a valid value. Video hardware may access padding bytes, therefore they must reside in accessible memory. Consider for example the case where padding bytes after the last line of an image cross a system page boundary. Capture devices may write padding bytes, the value is undefined. Output devices ignore the contents of padding bytes. When the image format is planar the `bytesperline` value applies to the largest plane and is divided by the same factor as the `width` field for any smaller planes. For example the Cb and Cr planes of a YUV 4:2:0 image have half as many padding bytes following each line as the Y plane. To avoid ambiguities drivers must return a `bytesperline` value rounded up to a multiple of the scale factor.
| __u32 | `sizeimage` | This field is irrelevant to non-destructive Video Overlays. For destructive Video Overlays applications must initialize this field. For Video Output Overlays the driver must return a valid format. Together with `base` it defines the framebuffer memory accessible by the driver.
| enum v4l2_colorspace | `colorspace` | This information supplements the `pixelformat` and must be set by the driver, see Section 2.2.
| __u32 | `priv` | Reserved for additional information about custom (driver defined) formats. When not used drivers and applications must set this field to zero.
Notes: a. A physical base address may not suit all platforms. GK notes in theory we should pass something like PCI device + memory region + offset instead. If you encounter problems please discuss on the Video4Linux mailing list: https://listman.redhat.com/mailman/listinfo/video4linux-list.

Table 2. Frame Buffer Capability Flags

`V4L2_FBUF_CAP_EXTERNOVERLAY` | 0x0001 | The device is capable of non-destructive overlays. When the driver clears this flag, only destructive overlays are supported. There are no drivers yet which support both destructive and non-destructive overlays.
`V4L2_FBUF_CAP_CHROMAKEY` | 0x0002 | The device supports clipping by chroma-keying the images. That is, image pixels replace pixels in the VGA or video signal only where the latter assume a certain color. Chroma-keying makes no sense for destructive overlays.
`V4L2_FBUF_CAP_LIST_CLIPPING` | 0x0004 | The device supports clipping using a list of clip rectangles.
`V4L2_FBUF_CAP_BITMAP_CLIPPING` | 0x0008 | The device supports clipping using a bit mask.
`V4L2_FBUF_CAP_LOCAL_ALPHA` | 0x0010 | The device supports clipping/blending using the alpha channel of the framebuffer or VGA signal. Alpha blending makes no sense for destructive overlays.
`V4L2_FBUF_CAP_GLOBAL_ALPHA` | 0x0020 | The device supports alpha blending using a global alpha value. Alpha blending makes no sense for destructive overlays.
`V4L2_FBUF_CAP_LOCAL_INV_ALPHA` | 0x0040 | The device supports clipping/blending using the inverted alpha channel of the framebuffer or VGA signal. Alpha blending makes no sense for destructive overlays.

Table 3. Frame Buffer Flags

`V4L2_FBUF_FLAG_PRIMARY` | 0x0001 | The framebuffer is the primary graphics surface. In other words, the overlay is destructive. [?]
`V4L2_FBUF_FLAG_OVERLAY` | 0x0002 | The frame buffer is an overlay surface the same size as the capture. [?]
The purpose of `V4L2_FBUF_FLAG_PRIMARY` and `V4L2_FBUF_FLAG_OVERLAY` was never quite clear. Most drivers seem to ignore these flags. For compatibility with the bttv driver applications should set the `V4L2_FBUF_FLAG_OVERLAY` flag.
`V4L2_FBUF_FLAG_CHROMAKEY` | 0x0004 | Use chroma-keying. The chroma-key color is determined by the `chromakey` field of struct v4l2_window and negotiated with the `VIDIOC_S_FMT` ioctl, see Section 4.2 and Section 4.4.
There are no flags to enable clipping using a list of clip rectangles or a bitmap. These methods are negotiated with the `VIDIOC_S_FMT` ioctl, see Section 4.2 and Section 4.4.
`V4L2_FBUF_FLAG_LOCAL_ALPHA` | 0x0008 | Use the alpha channel of the framebuffer to clip or blend framebuffer pixels with video images. The blend function is: output = framebuffer pixel * alpha + video pixel * (1 - alpha). The actual alpha depth depends on the framebuffer pixel format.
`V4L2_FBUF_FLAG_GLOBAL_ALPHA` | 0x0010 | Use a global alpha value to blend the framebuffer with video images. The blend function is: output = (framebuffer pixel * alpha + video pixel * (255 - alpha)) / 255. The alpha value is determined by the `global_alpha` field of struct v4l2_window and negotiated with the `VIDIOC_S_FMT` ioctl, see Section 4.2 and Section 4.4.
`V4L2_FBUF_FLAG_LOCAL_INV_ALPHA` | 0x0020 | Like `V4L2_FBUF_FLAG_LOCAL_ALPHA`, use the alpha channel of the framebuffer to clip or blend framebuffer pixels with video images, but with an inverted alpha value. The blend function is: output = framebuffer pixel * (1 - alpha) + video pixel * alpha. The actual alpha depth depends on the framebuffer pixel format.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EPERM

  `VIDIOC_S_FBUF` can only be called by a privileged user to negotiate the parameters for a destructive overlay.

EBUSY

  The framebuffer parameters cannot be changed at this time because overlay is already enabled, or capturing is enabled and the hardware cannot capture and overlay simultaneously.

EINVAL

  The ioctl is not supported or the `VIDIOC_S_FBUF` parameters are unsuitable.

# ioctl VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT

## Name

VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT -- Get or set the data format, try a format

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_format *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT

`argp`

## Description

These ioctls are used to negotiate the format of data (typically image format) exchanged between driver and application.

To query the current parameters applications set the `type` field of a struct `v4l2_format` to the respective buffer (stream) type. For example video capture devices use `V4L2_BUF_TYPE_VIDEO_CAPTURE`. When the application calls the `VIDIOC_G_FMT` ioctl with a pointer to this structure the driver fills the respective member of the `fmt` union. In case of video capture devices that is the struct v4l2_pix_format `pix` member. When the requested buffer type is not supported drivers return an EINVAL error code.

To change the current format parameters applications initialize the `type` field and all fields of the respective `fmt` union member. For details see the documentation of the various devices types in Chapter 4. Good practice is to query the current parameters first, and to modify only those parameters not suitable for the application. When the application calls the `VIDIOC_S_FMT` ioctl with a pointer to a `v4l2_format` structure the driver checks and adjusts the parameters against hardware abilities. Drivers should not return an error code unless the input is ambiguous, this is a mechanism to fathom device capabilities and to approach parameters acceptable for both the application and driver. On success the driver may program the hardware, allocate resources and generally prepare for data exchange. Finally the `VIDIOC_S_FMT` ioctl returns the current format parameters as `VIDIOC_G_FMT` does. Very simple, inflexible devices may even ignore all input and always return the default parameters. However all V4L2 devices exchanging data with the application must implement the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctl. When the requested buffer type is not supported drivers return an EINVAL error code on a `VIDIOC_S_FMT` attempt. When I/O is already in progress or the resource is not available for other reasons drivers return the EBUSY error code.

The `VIDIOC_TRY_FMT` ioctl is equivalent to `VIDIOC_S_FMT` with one exception: it does not change driver state. It can also be called at any time, never returning EBUSY. This function is provided to negotiate parameters, to learn about hardware limitations, without disabling I/O or possibly time consuming hardware preparations. Although strongly recommended drivers are not required to implement this ioctl.

Table 1. struct `v4l2_format`

enum v4l2_buf_type | `type` |  | Type of the data stream, see Table 3-2.
union | `fmt` |  |
| struct v4l2_pix_format | `pix` | Definition of an image format, see Chapter 2, used by video capture and output devices.
| struct v4l2_window | `win` | Definition of an overlaid image, see Section 4.2, used by video overlay devices.
| struct v4l2_vbi_format | `vbi` | Raw VBI capture or output parameters. This is discussed in more detail in Section 4.7. Used by raw VBI capture and output devices.
| struct v4l2_sliced_vbi_format | `sliced` | Sliced VBI capture or output parameters. See Section 4.8 for details. Used by sliced VBI capture and output devices.
| __u8 | `raw_data`[200] | Place holder for future extensions and custom (driver defined) formats with `type` `V4L2_BUF_TYPE_PRIVATE` and higher.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EBUSY

  The data format cannot be changed at this time, for example because I/O is already in progress.

EINVAL

  The struct v4l2_format `type` field is invalid, the requested buffer type not supported, or `VIDIOC_TRY_FMT` was called and is not supported with this buffer type.

# ioctl VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY

## Name

VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY -- Get or set tuner or modulator radio frequency

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_frequency *argp);`

``int ioctl`(int fd, int request, const struct v4l2_frequency *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY

`argp`

## Description

To get the current tuner or modulator radio frequency applications set the `tuner` field of a struct v4l2_frequency to the respective tuner or modulator number (only input devices have tuners, only output devices have modulators), zero out the `reserved` array and call the `VIDIOC_G_FREQUENCY` ioctl with a pointer to this structure. The driver stores the current frequency in the `frequency` field.

To change the current tuner or modulator radio frequency applications initialize the `tuner`, `type` and `frequency` fields, and the `reserved` array of a struct v4l2_frequency and call the `VIDIOC_S_FREQUENCY` ioctl with a pointer to this structure. When the requested frequency is not possible the driver assumes the closest possible value. However `VIDIOC_S_FREQUENCY` is a write-only ioctl, it does not return the actual new frequency.

Table 1. struct `v4l2_frequency`

__u32 | `tuner` | The tuner or modulator index number. This is the same value as in the struct v4l2_input `tuner` field and the struct v4l2_tuner `index` field, or the struct v4l2_output `modulator` field and the struct v4l2_modulator `index` field.
enum v4l2_tuner_type | `type` | The tuner type. This is the same value as in the struct v4l2_tuner `type` field. The field is not applicable to modulators, i. e. ignored by drivers.
__u32 | `frequency` | Tuning frequency in units of 62.5 kHz, or if the struct v4l2_tuner or struct v4l2_modulator `capabilities` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz.
__u32 | `reserved`[8]; | Reserved for future extensions. Drivers and applications must set the array to zero.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The `tuner` index is out of bounds or the value in the `type` field is wrong.

# ioctl VIDIOC_G_INPUT, VIDIOC_S_INPUT

## Name

VIDIOC_G_INPUT, VIDIOC_S_INPUT -- Query or select the current video input

## Synopsis

``int ioctl`(int fd, int request, int *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_INPUT, VIDIOC_S_INPUT

`argp`

## Description

To query the current video input applications call the `VIDIOC_G_INPUT` ioctl with a pointer to an integer where the driver stores the number of the input, as in the struct v4l2_input `index` field. This ioctl will fail only when there are no video inputs, returning EINVAL.

To select a video input applications store the number of the desired input in an integer and call the `VIDIOC_S_INPUT` ioctl with a pointer to this integer. Side effects are possible. For example inputs may support different video standards, so the driver may implicitly switch the current standard. It is good practice to select an input before querying or negotiating any other parameters.

Information about video inputs is available using the `VIDIOC_ENUMINPUT` ioctl.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The number of the video input is out of bounds, or there are no video inputs at all and this ioctl is not supported.

EBUSY

  I/O is in progress, the input cannot be switched.

# ioctl VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP

## Name

VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP --

## Synopsis

``int ioctl`(int fd, int request, v4l2_jpegcompression *argp);`

``int ioctl`(int fd, int request, const v4l2_jpegcompression *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP

`argp`

## Description

[to do]

Ronald Bultje elaborates:

APP is some application-specific information. The application can set it itself, and it'll be stored in the JPEG-encoded fields (eg; interlacing information for in an AVI or so). COM is the same, but it's comments, like 'encoded by me' or so.

jpeg_markers describes whether the huffman tables, quantization tables and the restart interval information (all JPEG-specific stuff) should be stored in the JPEG-encoded fields. These define how the JPEG field is encoded. If you omit them, applications assume you've used standard encoding. You usually do want to add them.

Table 1. struct `v4l2_jpegcompression`

int | `quality` |
int | `APPn` |
int | `APP_len` |
char | `APP_data`[60] |
int | `COM_len` |
char | `COM_data`[60] |
__u32 | `jpeg_markers` | See Table 2.

Table 2. JPEG Markers Flags

`V4L2_JPEG_MARKER_DHT` | (1<<3) | Define Huffman Tables
`V4L2_JPEG_MARKER_DQT` | (1<<4) | Define Quantization Tables
`V4L2_JPEG_MARKER_DRI` | (1<<5) | Define Restart Interval
`V4L2_JPEG_MARKER_COM` | (1<<6) | Comment segment
`V4L2_JPEG_MARKER_APP` | (1<<7) | App segment, driver will always use APP0

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  This ioctl is not supported.

# ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR

## Name

VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR -- Get or set modulator attributes

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_modulator *argp);`

``int ioctl`(int fd, int request, const struct v4l2_modulator *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR

`argp`

## Description

To query the attributes of a modulator applications initialize the `index` field and zero out the `reserved` array of a struct v4l2_modulator and call the `VIDIOC_G_MODULATOR` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all modulators applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

Modulators have two writable properties, an audio modulation set and the radio frequency. To change the modulated audio subprograms, applications initialize the `index` and `txsubchans` fields and the `reserved` array and call the `VIDIOC_S_MODULATOR` ioctl. Drivers may choose a different audio modulation if the request cannot be satisfied. However this is a write-only ioctl, it does not return the actual audio modulation selected.

To change the radio frequency the `VIDIOC_S_FREQUENCY` ioctl is available.

Table 1. struct `v4l2_modulator`

__u32 | `index` | Identifies the modulator, set by the application.
__u8 | `name`[32] | Name of the modulator, a NUL-terminated ASCII string. This information is intended for the user.
__u32 | `capability` | Modulator capability flags. No flags are defined for this field, the tuner flags in struct v4l2_tuner are used accordingly. The audio flags indicate the ability to encode audio subprograms. They will not change for example with the current video standard.
__u32 | `rangelow` | The lowest tunable frequency in units of 62.5 KHz, or if the `capability` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz.
__u32 | `rangehigh` | The highest tunable frequency in units of 62.5 KHz, or if the `capability` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz.
__u32 | `txsubchans` | With this field applications can determine how audio sub-carriers shall be modulated. It contains a set of flags as defined in Table 2. Note the tuner `rxsubchans` flags are reused, but the semantics are different. Video output devices are assumed to have an analog or PCM audio input with 1-3 channels. The `txsubchans` flags select one or more channels for modulation, together with some audio subprogram indicator, for example a stereo pilot tone.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers and applications must set the array to zero.

Table 2. Modulator Audio Transmission Flags

`V4L2_TUNER_SUB_MONO` | 0x0001 | Modulate channel 1 as mono audio, when the input has more channels, a down-mix of channel 1 and 2. This flag does not combine with `V4L2_TUNER_SUB_STEREO` or `V4L2_TUNER_SUB_LANG1`.
`V4L2_TUNER_SUB_STEREO` | 0x0002 | Modulate channel 1 and 2 as left and right channel of a stereo audio signal. When the input has only one channel or two channels and `V4L2_TUNER_SUB_SAP` is also set, channel 1 is encoded as left and right channel. This flag does not combine with `V4L2_TUNER_SUB_MONO` or `V4L2_TUNER_SUB_LANG1`. When the driver does not support stereo audio it shall fall back to mono.
`V4L2_TUNER_SUB_LANG1` | 0x0008 | Modulate channel 1 and 2 as primary and secondary language of a bilingual audio signal. When the input has only one channel it is used for both languages. It is not possible to encode the primary or secondary language only. This flag does not combine with `V4L2_TUNER_SUB_MONO` or `V4L2_TUNER_SUB_STEREO`. If the hardware does not support the respective audio matrix, or the current video standard does not permit bilingual audio the `VIDIOC_S_MODULATOR` ioctl shall return an EINVAL error code and the driver shall fall back to mono or stereo mode.
`V4L2_TUNER_SUB_LANG2` | 0x0004 | Same effect as `V4L2_TUNER_SUB_LANG1`.
`V4L2_TUNER_SUB_SAP` | 0x0004 | When combined with `V4L2_TUNER_SUB_MONO` the first channel is encoded as mono audio, the last channel as Second Audio Program. When the input has only one channel it is used for both audio tracks. When the input has three channels the mono track is a down-mix of channel 1 and 2. When combined with `V4L2_TUNER_SUB_STEREO` channel 1 and 2 are encoded as left and right stereo audio, channel 3 as Second Audio Program. When the input has only two channels, the first is encoded as left and right channel and the second as SAP. When the input has only one channel it is used for all audio tracks. It is not possible to encode a Second Audio Program only. This flag must combine with `V4L2_TUNER_SUB_MONO` or `V4L2_TUNER_SUB_STEREO`. If the hardware does not support the respective audio matrix, or the current video standard does not permit SAP the `VIDIOC_S_MODULATOR` ioctl shall return an EINVAL error code and driver shall fall back to mono or stereo mode.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_modulator `index` is out of bounds.

# ioctl VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT

## Name

VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT -- Query or select the current video output

## Synopsis

``int ioctl`(int fd, int request, int *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT

`argp`

## Description

To query the current video output applications call the `VIDIOC_G_OUTPUT` ioctl with a pointer to an integer where the driver stores the number of the output, as in the struct v4l2_output `index` field. This ioctl will fail only when there are no video outputs, returning the EINVAL error code.

To select a video output applications store the number of the desired output in an integer and call the `VIDIOC_S_OUTPUT` ioctl with a pointer to this integer. Side effects are possible. For example outputs may support different video standards, so the driver may implicitly switch the current standard. It is good practice to select an output before querying or negotiating any other parameters.

Information about video outputs is available using the `VIDIOC_ENUMOUTPUT` ioctl.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The number of the video output is out of bounds, or there are no video outputs at all and this ioctl is not supported.

EBUSY

  I/O is in progress, the output cannot be switched.

# ioctl VIDIOC_G_PARM, VIDIOC_S_PARM

## Name

VIDIOC_G_PARM, VIDIOC_S_PARM -- Get or set streaming parameters

## Synopsis

``int ioctl`(int fd, int request, v4l2_streamparm *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_PARM, VIDIOC_S_PARM

`argp`

## Description

The current video standard determines a nominal number of frames per second. If less than this number of frames is to be captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the `read()` or `write()`, which are not augmented by timestamps or sequence counters, and to avoid unneccessary data copying.

Further these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For implications see the section discussing the `read()` function.

To get and set the streaming parameters applications call the `VIDIOC_G_PARM` and `VIDIOC_S_PARM` ioctl, respectively. They take a pointer to a struct `v4l2_streamparm` which contains a union holding separate parameters for input and output devices.

Table 1. struct `v4l2_streamparm`

enum v4l2_buf_type | `type` |  | The buffer (stream) type, same as struct v4l2_format `type`, set by the application.
union | `parm` |  |
| struct v4l2_captureparm | `capture` | Parameters for capture devices, used when `type` is `V4L2_BUF_TYPE_VIDEO_CAPTURE`.
| struct v4l2_outputparm | `output` | Parameters for output devices, used when `type` is `V4L2_BUF_TYPE_VIDEO_OUTPUT`.
| __u8 | `raw_data`[200] | A place holder for future extensions and custom (driver defined) buffer types `V4L2_BUF_TYPE_PRIVATE` and higher.

Table 2. struct `v4l2_captureparm`

__u32 | `capability` | See Table 4.
__u32 | `capturemode` | Set by drivers and applications, see Table 5.
struct v4l2_fract | `timeperframe` | This is is the desired period between successive frames captured by the driver, in seconds. The field is intended to skip frames on the driver side, saving I/O bandwidth. Applications store here the desired frame period, drivers return the actual frame period, which must be greater or equal to the nominal frame period determined by the current video standard (struct v4l2_standard `frameperiod` field). Changing the video standard (also implicitly by switching the video input) may reset this parameter to the nominal frame period. To reset manually applications can just set this field to zero. Drivers support this function only when they set the `V4L2_CAP_TIMEPERFRAME` flag in the `capability` field.
__u32 | `extendedmode` | Custom (driver specific) streaming parameters. When unused, applications and drivers must set this field to zero. Applications using this field should check the driver name and version, see Section 1.2.
__u32 | `readbuffers` | Applications set this field to the desired number of buffers used internally by the driver in `read()` mode. Drivers return the actual number of buffers. When an application requests zero buffers, drivers should just return the current setting rather than the minimum or an error code. For details see Section 3.1.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers and applications must set the array to zero.

Table 3. struct `v4l2_outputparm`

__u32 | `capability` | See Table 4.
__u32 | `outputmode` | Set by drivers and applications, see Table 5.
struct v4l2_fract | `timeperframe` | This is is the desired period between successive frames output by the driver, in seconds.
The field is intended to repeat frames on the driver side in `write()` mode (in streaming mode timestamps can be used to throttle the output), saving I/O bandwidth. Applications store here the desired frame period, drivers return the actual frame period, which must be greater or equal to the nominal frame period determined by the current video standard (struct v4l2_standard `frameperiod` field). Changing the video standard (also implicitly by switching the video output) may reset this parameter to the nominal frame period. To reset manually applications can just set this field to zero. Drivers support this function only when they set the `V4L2_CAP_TIMEPERFRAME` flag in the `capability` field.
__u32 | `extendedmode` | Custom (driver specific) streaming parameters. When unused, applications and drivers must set this field to zero. Applications using this field should check the driver name and version, see Section 1.2.
__u32 | `writebuffers` | Applications set this field to the desired number of buffers used internally by the driver in `write()` mode. Drivers return the actual number of buffers. When an application requests zero buffers, drivers should just return the current setting rather than the minimum or an error code. For details see Section 3.1.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers and applications must set the array to zero.

Table 4. Streaming Parameters Capabilites

`V4L2_CAP_TIMEPERFRAME` | 0x1000 | The frame skipping/repeating controlled by the `timeperframe` field is supported.

Table 5. Capture Parameters Flags

`V4L2_MODE_HIGHQUALITY` | 0x0001 | High quality imaging mode. High quality mode is intended for still imaging applications. The idea is to get the best possible image quality that the hardware can deliver. It is not defined how the driver writer may achieve that; it will depend on the hardware and the ingenuity of the driver writer. High quality mode is a different mode from the the regular motion video capture modes. In high quality mode: The driver may be able to capture higher resolutions than for motion capture. The driver may support fewer pixel formats than motion capture (eg; true color). The driver may capture and arithmetically combine multiple successive fields or frames to remove color edge artifacts and reduce the noise in the video data. The driver may capture images in slices like a scanner in order to handle larger format images than would otherwise be possible. An image capture operation may be significantly slower than motion capture. Moving objects in the image might have excessive motion blur. Capture might only work through the `read()` call.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  This ioctl is not supported.

# ioctl VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY

## Name

VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY -- Query or request the access priority associated with a file descriptor

## Synopsis

``int ioctl`(int fd, int request, enum v4l2_priority *argp);`

``int ioctl`(int fd, int request, const enum v4l2_priority *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY

`argp`

  Pointer to an enum v4l2_priority type.

## Description

To query the current access priority applications call the `VIDIOC_G_PRIORITY` ioctl with a pointer to an enum v4l2_priority variable where the driver stores the current priority.

To request an access priority applications store the desired priority in an enum v4l2_priority variable and call `VIDIOC_S_PRIORITY` ioctl with a pointer to this variable.

Table 1. enum v4l2_priority

`V4L2_PRIORITY_UNSET` | 0 |
`V4L2_PRIORITY_BACKGROUND` | 1 | Lowest priority, usually applications running in background, for example monitoring VBI transmissions. A proxy application running in user space will be necessary if multiple applications want to read from a device at this priority.
`V4L2_PRIORITY_INTERACTIVE` | 2 |
`V4L2_PRIORITY_DEFAULT` | 2 | Medium priority, usually applications started and interactively controlled by the user. For example TV viewers, Teletext browsers, or just "panel" applications to change the channel or video controls. This is the default priority unless an application requests another.
`V4L2_PRIORITY_RECORD` | 3 | Highest priority. Only one file descriptor can have this priority, it blocks any other fd from changing device properties. Usually applications which must not be interrupted, like video recording.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The requested priority value is invalid, or the driver does not support access priorities.

EBUSY

  Another application already requested higher priority.

# ioctl VIDIOC_G_SLICED_VBI_CAP

## Name

VIDIOC_G_SLICED_VBI_CAP -- Query sliced VBI capabilities

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_sliced_vbi_cap *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_SLICED_VBI_CAP

`argp`

## Description

To find out which data services are supported by a sliced VBI capture or output device, applications initialize the `type` field of a struct v4l2_sliced_vbi_cap, clear the `reserved` array and call the `VIDIOC_G_SLICED_VBI_CAP` ioctl. The driver fills in the remaining fields or returns an EINVAL error code if the sliced VBI API is unsupported or `type` is invalid.

Note the `type` field was added, and the ioctl changed from read-only to write-read, in Linux 2.6.19.

Table 1. struct `v4l2_sliced_vbi_cap`

__u16 | `service_set` | A set of all data services supported by the driver. Equal to the union of all elements of the `service_lines` array.
__u16 | `service_lines`[2][24] | Each element of this array contains a set of data services the hardware can look for or insert into a particular scan line. Data services are defined in Table 2. Array indices map to ITU-R line numbers (see also Figure 4-2 and Figure 4-3) as follows:
|  | Element | 525 line systems | 625 line systems
|  | `service_lines`[0][1] | 1 | 1
|  | `service_lines`[0][23] | 23 | 23
|  | `service_lines`[1][1] | 264 | 314
|  | `service_lines`[1][23] | 286 | 336
|  | The number of VBI lines the hardware can capture or output per frame, or the number of services it can identify on a given line may be limited. For example on PAL line 16 the hardware may be able to look for a VPS or Teletext signal, but not both at the same time. Applications can learn about these limits using the `VIDIOC_S_FMT` ioctl as described in Section 4.8.
|  | Drivers must set `service_lines`[0][0] and `service_lines`[1][0] to zero.
enum v4l2_buf_type | `type` | Type of the data stream, see Table 3-2. Should be `V4L2_BUF_TYPE_SLICED_VBI_CAPTURE` or `V4L2_BUF_TYPE_SLICED_VBI_OUTPUT`. |  |
__u32 | `reserved`[3] | This array is reserved for future extensions. Applications and drivers must set it to zero.

Table 2. Sliced VBI services

Symbol | Value | Reference | Lines, usually | Payload
--- | --- | --- | --- | ---
`V4L2_SLICED_TELETEXT_B` (Teletext System B) | 0x0001 | ETS 300 706, ITU BT.653 | PAL/SECAM line 7-22, 320-335 (second field 7-22) | Last 42 of the 45 byte Teletext packet, that is without clock run-in and framing code, lsb first transmitted.
`V4L2_SLICED_VPS` | 0x0400 | ETS 300 231 | PAL line 16 | Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb first transmitted.
`V4L2_SLICED_CAPTION_525` | 0x1000 | EIA 608-B | NTSC line 21, 284 (second field 21) | Two bytes in transmission order, including parity bit, lsb first transmitted.
`V4L2_SLICED_WSS_625` | 0x4000 | EN 300 294, ITU BT.1119 | PAL/SECAM line 23 |
    Byte        0                 1
         msb         lsb  msb           lsb
    Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
`V4L2_SLICED_VBI_525` | 0x1000 | Set of services applicable to 525 line systems.
`V4L2_SLICED_VBI_625` | 0x4401 | Set of services applicable to 625 line systems.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The device does not support sliced VBI capturing or output, or the value in the `type` field is wrong.

# ioctl VIDIOC_G_STD, VIDIOC_S_STD

## Name

VIDIOC_G_STD, VIDIOC_S_STD -- Query or select the video standard of the current input

## Synopsis

``int ioctl`(int fd, int request, v4l2_std_id *argp);`

``int ioctl`(int fd, int request, const v4l2_std_id *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_STD, VIDIOC_S_STD

`argp`

## Description

To query and select the current video standard applications use the `VIDIOC_G_STD` and `VIDIOC_S_STD` ioctls which take a pointer to a v4l2_std_id type as argument. `VIDIOC_G_STD` can return a single flag or a set of flags as in struct v4l2_standard field `id`. The flags must be unambiguous such that they appear in only one enumerated `v4l2_standard` structure.

`VIDIOC_S_STD` accepts one or more flags, being a write-only ioctl it does not return the actual new standard as `VIDIOC_G_STD` does. When no flags are given or the current input does not support the requested standard the driver returns an EINVAL error code. When the standard set is ambiguous drivers may return EINVAL or choose any of the requested standards.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  This ioctl is not supported, or the `VIDIOC_S_STD` parameter was unsuitable.

# ioctl VIDIOC_G_TUNER, VIDIOC_S_TUNER

## Name

VIDIOC_G_TUNER, VIDIOC_S_TUNER -- Get or set tuner attributes

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_tuner *argp);`

``int ioctl`(int fd, int request, const struct v4l2_tuner *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_G_TUNER, VIDIOC_S_TUNER

`argp`

## Description

To query the attributes of a tuner applications initialize the `index` field and zero out the `reserved` array of a struct v4l2_tuner and call the `VIDIOC_G_TUNER` ioctl with a pointer to this structure. Drivers fill the rest of the structure or return an EINVAL error code when the index is out of bounds. To enumerate all tuners applications shall begin at index zero, incrementing by one until the driver returns EINVAL.

Tuners have two writable properties, the audio mode and the radio frequency. To change the audio mode, applications initialize the `index`, `audmode` and `reserved` fields and call the `VIDIOC_S_TUNER` ioctl. This will not change the current tuner, which is determined by the current video input. Drivers may choose a different audio mode if the requested mode is invalid or unsupported. Since this is a write-only ioctl, it does not return the actually selected audio mode.

To change the radio frequency the `VIDIOC_S_FREQUENCY` ioctl is available.

Table 1. struct `v4l2_tuner`

__u32 | `index` | Identifies the tuner, set by the application.
__u8 | `name`[32] | Name of the tuner, a NUL-terminated ASCII string. This information is intended for the user.
enum v4l2_tuner_type | `type` | Type of the tuner, see Table 2.
__u32 | `capability` | Tuner capability flags, see Table 3. Audio flags indicate the ability to decode audio subprograms. They will not change, for example with the current video standard. When the structure refers to a radio tuner only the `V4L2_TUNER_CAP_LOW` and `V4L2_TUNER_CAP_STEREO` flags can be set.
__u32 | `rangelow` | The lowest tunable frequency in units of 62.5 kHz, or if the `capability` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz.
__u32 | `rangehigh` | The highest tunable frequency in units of 62.5 kHz, or if the `capability` flag `V4L2_TUNER_CAP_LOW` is set, in units of 62.5 Hz.
__u32 | `rxsubchans` | Some tuners or audio decoders can determine the received audio subprograms by analyzing audio carriers, pilot tones or other indicators. To pass this information drivers set flags defined in Table 4 in this field. For example:
|  | `V4L2_TUNER_SUB_MONO` | receiving mono audio
|  | `STEREO | SAP` | receiving stereo audio and a secondary audio program
|  | `MONO | STEREO` | receiving mono or stereo audio, the hardware cannot distinguish
|  | `LANG1 | LANG2` | receiving bilingual audio
|  | `MONO | STEREO | LANG1 | LANG2` | receiving mono, stereo or bilingual audio
|  | When the `V4L2_TUNER_CAP_STEREO`, `_LANG1`, `_LANG2` or `_SAP` flag is cleared in the `capability` field, the corresponding `V4L2_TUNER_SUB_` flag must not be set here. This field is valid only if this is the tuner of the current video input, or when the structure refers to a radio tuner.
__u32 | `audmode` | The selected audio mode, see Table 5 for valid values. The audio mode does not affect audio subprogram detection, and like a control it does not automatically change unless the requested mode is invalid or unsupported. See Table 6 for possible results when the selected and received audio programs do not match. Currently this is the only field of struct `v4l2_tuner` applications can change.
__u32 | `signal` | The signal strength if known, ranging from 0 to 65535. Higher values indicate a better signal.
__s32 | `afc` | Automatic frequency control: When the `afc` value is negative, the frequency is too low, when positive too high.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers and applications must set the array to zero.

Table 2. enum v4l2_tuner_type

`V4L2_TUNER_RADIO` | 1 |
`V4L2_TUNER_ANALOG_TV` | 2 |

Table 3. Tuner and Modulator Capability Flags

`V4L2_TUNER_CAP_LOW` | 0x0001 | When set, tuning frequencies are expressed in units of 62.5 Hz, otherwise in units of 62.5 kHz.
`V4L2_TUNER_CAP_NORM` | 0x0002 | This is a multi-standard tuner; the video standard can or must be switched. (B/G PAL tuners for example are typically not considered multi-standard because the video standard is automatically determined from the frequency band.) The set of supported video standards is available from the struct v4l2_input pointing to this tuner, see the description of ioctl `VIDIOC_ENUMINPUT` for details. Only `V4L2_TUNER_ANALOG_TV` tuners can have this capability.
`V4L2_TUNER_CAP_STEREO` | 0x0010 | Stereo audio reception is supported.
`V4L2_TUNER_CAP_LANG1` | 0x0040 | Reception of the primary language of a bilingual audio program is supported. Bilingual audio is a feature of two-channel systems, transmitting the primary language monaural on the main audio carrier and a secondary language monaural on a second carrier. Only `V4L2_TUNER_ANALOG_TV` tuners can have this capability.
`V4L2_TUNER_CAP_LANG2` | 0x0020 | Reception of the secondary language of a bilingual audio program is supported. Only `V4L2_TUNER_ANALOG_TV` tuners can have this capability.
`V4L2_TUNER_CAP_SAP` | 0x0020 | Reception of a secondary audio program is supported. This is a feature of the BTSC system which accompanies the NTSC video standard. Two audio carriers are available for mono or stereo transmissions of a primary language, and an independent third carrier for a monaural secondary language. Only `V4L2_TUNER_ANALOG_TV` tuners can have this capability. Note the `V4L2_TUNER_CAP_LANG2` and `V4L2_TUNER_CAP_SAP` flags are synonyms. `V4L2_TUNER_CAP_SAP` applies when the tuner supports the `V4L2_STD_NTSC_M` video standard.

Table 4. Tuner Audio Reception Flags

`V4L2_TUNER_SUB_MONO` | 0x0001 | The tuner receives a mono audio signal.
`V4L2_TUNER_SUB_STEREO` | 0x0002 | The tuner receives a stereo audio signal.
`V4L2_TUNER_SUB_LANG1` | 0x0008 | The tuner receives the primary language of a bilingual audio signal. Drivers must clear this flag when the current video standard is `V4L2_STD_NTSC_M`.
`V4L2_TUNER_SUB_LANG2` | 0x0004 | The tuner receives the secondary language of a bilingual audio signal (or a second audio program).
`V4L2_TUNER_SUB_SAP` | 0x0004 | The tuner receives a Second Audio Program. Note the `V4L2_TUNER_SUB_LANG2` and `V4L2_TUNER_SUB_SAP` flags are synonyms. The `V4L2_TUNER_SUB_SAP` flag applies when the current video standard is `V4L2_STD_NTSC_M`.

Table 5. Tuner Audio Modes

`V4L2_TUNER_MODE_MONO` | 0 | Play mono audio. When the tuner receives a stereo signal this a down-mix of the left and right channel. When the tuner receives a bilingual or SAP signal this mode selects the primary language.
`V4L2_TUNER_MODE_STEREO` | 1 | Play stereo audio. When the tuner receives bilingual audio it may play different languages on the left and right channel or the primary language on both channels. behave as in mono mode. Playing different languages in this mode is deprecated. New drivers should do this only in `MODE_LANG1_LANG2`. When the tuner receives no stereo signal or does not support stereo reception the driver shall fall back to `MODE_MONO`.
`V4L2_TUNER_MODE_LANG1` | 3 | Play the primary language, mono or stereo. Only `V4L2_TUNER_ANALOG_TV` tuners support this mode.
`V4L2_TUNER_MODE_LANG2` | 2 | Play the secondary language, mono. When the tuner receives no bilingual audio or SAP, or their reception is not supported the driver shall fall back to mono or stereo mode. Only `V4L2_TUNER_ANALOG_TV` tuners support this mode.
`V4L2_TUNER_MODE_SAP` | 2 | Play the Second Audio Program. When the tuner receives no bilingual audio or SAP, or their reception is not supported the driver shall fall back to mono or stereo mode. Only `V4L2_TUNER_ANALOG_TV` tuners support this mode. Note the `V4L2_TUNER_MODE_LANG2` and `V4L2_TUNER_MODE_SAP` are synonyms.
`V4L2_TUNER_MODE_LANG1_LANG2` | 4 | Play the primary language on the left channel, the secondary language on the right channel. When the tuner receives no bilingual audio or SAP, it shall fall back to `MODE_LANG1` or `MODE_MONO`. Only `V4L2_TUNER_ANALOG_TV` tuners support this mode.

Table 6. Tuner Audio Matrix

| Selected `V4L2_TUNER_MODE_`
--- | ---
Received `V4L2_TUNER_SUB_` | `MONO` | `STEREO` | `LANG1` | `LANG2 = SAP` | `LANG1_LANG2`[a]
`MONO` | Mono | Mono/Mono | Mono | Mono | Mono/Mono
`MONO | SAP` | Mono | Mono/Mono | Mono | SAP | Mono/SAP (preferred) or Mono/Mono
`STEREO` | L+R | L/R | Stereo L/R (preferred) or Mono L+R | Stereo L/R (preferred) or Mono L+R | L/R (preferred) or L+R/L+R
`STEREO | SAP` | L+R | L/R | Stereo L/R (preferred) or Mono L+R | SAP | L+R/SAP (preferred) or L/R or L+R/L+R
`LANG1 | LANG2` | Language 1 | Lang1/Lang2 (deprecated[b]) or Lang1/Lang1 | Language 1 | Language 2 | Lang1/Lang2 (preferred) or Lang1/Lang1
Notes: a. This mode has been added in Linux 2.6.17 and may not be supported by older drivers. b. Playback of both languages in `MODE_STEREO` is deprecated. In the future drivers should produce only the primary language in this mode. Applications should request `MODE_LANG1_LANG2` to record both languages or a stereo signal.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_tuner `index` is out of bounds.

# ioctl VIDIOC_LOG_STATUS

## Name

VIDIOC_LOG_STATUS -- Log driver status information

## Synopsis

``int ioctl`(int fd, int request);`

## Description

As the video/audio devices become more complicated it becomes harder to debug problems. When this ioctl is called the driver will output the current device status to the kernel log. This is particular useful when dealing with problems like no sound, no video and incorrectly tuned channels. Also many modern devices autodetect video and audio standards and this ioctl will report what the device thinks what the standard is. Mismatches may give an indication where the problem is.

This ioctl is optional and not all drivers support it. It was introduced in Linux 2.6.15.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The driver does not support this ioctl.

# ioctl VIDIOC_OVERLAY

## Name

VIDIOC_OVERLAY -- Start or stop video overlay

## Synopsis

``int ioctl`(int fd, int request, const int *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_OVERLAY

`argp`

## Description

This ioctl is part of the video overlay I/O method. Applications call `VIDIOC_OVERLAY` to start or stop the overlay. It takes a pointer to an integer which must be set to zero by the application to stop overlay, to one to start.

Drivers do not support `VIDIOC_STREAMON` or `VIDIOC_STREAMOFF` with `V4L2_BUF_TYPE_VIDEO_OVERLAY`.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  Video overlay is not supported, or the parameters have not been set up. See Section 4.2 for the necessary steps.

# ioctl VIDIOC_QBUF, VIDIOC_DQBUF

## Name

VIDIOC_QBUF, VIDIOC_DQBUF -- Exchange a buffer with the driver

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_buffer *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_QBUF, VIDIOC_DQBUF

`argp`

## Description

Applications call the `VIDIOC_QBUF` ioctl to enqueue an empty (capturing) or filled (output) buffer in the driver's incoming queue. The semantics depend on the selected I/O method.

To enqueue a memory mapped buffer applications set the `type` field of a struct v4l2_buffer to the same buffer type as previously struct v4l2_format `type` and struct v4l2_requestbuffers `type`, the `memory` field to `V4L2_MEMORY_MMAP` and the `index` field. Valid index numbers range from zero to the number of buffers allocated with `VIDIOC_REQBUFS` (struct v4l2_requestbuffers `count`) minus one. The contents of the struct `v4l2_buffer` returned by a `VIDIOC_QUERYBUF` ioctl will do as well. When the buffer is intended for output (`type` is `V4L2_BUF_TYPE_VIDEO_OUTPUT` or `V4L2_BUF_TYPE_VBI_OUTPUT`) applications must also initialize the `bytesused`, `field` and `timestamp` fields. See Section 3.5 for details. When `VIDIOC_QBUF` is called with a pointer to this structure the driver sets the `V4L2_BUF_FLAG_MAPPED` and `V4L2_BUF_FLAG_QUEUED` flags and clears the `V4L2_BUF_FLAG_DONE` flag in the `flags` field, or it returns an EINVAL error code.

To enqueue a user pointer buffer applications set the `type` field of a struct v4l2_buffer to the same buffer type as previously struct v4l2_format `type` and struct v4l2_requestbuffers `type`, the `memory` field to `V4L2_MEMORY_USERPTR` and the `m.userptr` field to the address of the buffer and `length` to its size. When the buffer is intended for output additional fields must be set as above. When `VIDIOC_QBUF` is called with a pointer to this structure the driver sets the `V4L2_BUF_FLAG_QUEUED` flag and clears the `V4L2_BUF_FLAG_MAPPED` and `V4L2_BUF_FLAG_DONE` flags in the `flags` field, or it returns an error code. This ioctl locks the memory pages of the buffer in physical memory, they cannot be swapped out to disk. Buffers remain locked until dequeued, until the `VIDIOC_STREAMOFF` or `VIDIOC_REQBUFS` ioctl are called, or until the device is closed.

Applications call the `VIDIOC_DQBUF` ioctl to dequeue a filled (capturing) or displayed (output) buffer from the driver's outgoing queue. They just set the `type` and `memory` fields of a struct v4l2_buffer as above, when `VIDIOC_DQBUF` is called with a pointer to this structure the driver fills the remaining fields or returns an error code.

By default `VIDIOC_DQBUF` blocks when no buffer is in the outgoing queue. When the `O_NONBLOCK` flag was given to the `open()` function, `VIDIOC_DQBUF` returns immediately with an EAGAIN error code when no buffer is available.

The `v4l2_buffer` structure is specified in Section 3.5.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EAGAIN

  Non-blocking I/O has been selected using `O_NONBLOCK` and no buffer was in the outgoing queue.

EINVAL

  The buffer `type` is not supported, or the `index` is out of bounds, or no buffers have been allocated yet, or the `userptr` or `length` are invalid.

ENOMEM

  Not enough physical or virtual memory was available to enqueue a user pointer buffer.

EIO

  `VIDIOC_DQBUF` failed due to an internal error. Can also indicate temporary problems like signal loss. Note the driver might dequeue an (empty) buffer despite returning an error, or even stop capturing.

# ioctl VIDIOC_QUERYBUF

## Name

VIDIOC_QUERYBUF -- Query the status of a buffer

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_buffer *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_QUERYBUF

`argp`

## Description

This ioctl is part of the memory mapping I/O method. It can be used to query the status of a buffer at any time after buffers have been allocated with the `VIDIOC_REQBUFS` ioctl.

Applications set the `type` field of a struct v4l2_buffer to the same buffer type as previously struct v4l2_format `type` and struct v4l2_requestbuffers `type`, and the `index` field. Valid index numbers range from zero to the number of buffers allocated with `VIDIOC_REQBUFS` (struct v4l2_requestbuffers `count`) minus one. After calling `VIDIOC_QUERYBUF` with a pointer to this structure drivers return an error code or fill the rest of the structure.

In the `flags` field the `V4L2_BUF_FLAG_MAPPED`, `V4L2_BUF_FLAG_QUEUED` and `V4L2_BUF_FLAG_DONE` flags will be valid. The `memory` field will be set to `V4L2_MEMORY_MMAP`, the `m.offset` contains the offset of the buffer from the start of the device memory, the `length` field its size. The driver may or may not set the remaining fields and flags, they are meaningless in this context.

The `v4l2_buffer` structure is specified in Section 3.5.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The buffer `type` is not supported, or the `index` is out of bounds.

# ioctl VIDIOC_QUERYCAP

## Name

VIDIOC_QUERYCAP -- Query device capabilities

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_capability *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_QUERYCAP

`argp`

## Description

All V4L2 devices support the `VIDIOC_QUERYCAP` ioctl. It is used to identify kernel devices compatible with this specification and to obtain information about driver and hardware capabilities. The ioctl takes a pointer to a struct v4l2_capability which is filled by the driver. When the driver is not compatible with this specification the ioctl returns an EINVAL error code.

Table 1. struct `v4l2_capability`

__u8 | `driver`[16] | Name of the driver, a unique NUL-terminated ASCII string. For example: "bttv". Driver specific applications can use this information to verify the driver identity. It is also useful to work around known bugs, or to identify drivers in error reports. The driver version is stored in the `version` field. Storing strings in fixed sized arrays is bad practice but unavoidable here. Drivers and applications should take precautions to never read or write beyond the end of the array and to make sure the strings are properly NUL-terminated.
__u8 | `card`[32] | Name of the device, a NUL-terminated ASCII string. For example: "Yoyodyne TV/FM". One driver may support different brands or models of video hardware. This information is intended for users, for example in a menu of available devices. Since multiple TV cards of the same brand may be installed which are supported by the same driver, this name should be combined with the character device file name (e. g. `/dev/video2`) or the `bus_info` string to avoid ambiguities.
__u8 | `bus_info`[32] | Location of the device in the system, a NUL-terminated ASCII string. For example: "PCI Slot 4". This information is intended for users, to distinguish multiple identical devices. If no such information is available the field may simply count the devices controlled by the driver, or contain the empty string (`bus_info`[0] = 0).
__u32 | `version` | Version number of the driver. Together with the `driver` field this identifies a particular driver. The version number is formatted using the `KERNEL_VERSION()` macro:
    #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))

    __u32 version = KERNEL_VERSION(0, 8, 1);

    printf ("Version: %u.%u.%u\n",
            (version >> 16) & 0xFF,
            (version >> 8) & 0xFF,
             version & 0xFF);
__u32 | `capabilities` | Device capabilities, see Table 2.
__u32 | `reserved`[4] | Reserved for future extensions. Drivers must set this array to zero.

Table 2. Device Capabilities Flags

`V4L2_CAP_VIDEO_CAPTURE` | 0x00000001 | The device supports the Video Capture interface.
`V4L2_CAP_VIDEO_OUTPUT` | 0x00000002 | The device supports the Video Output interface.
`V4L2_CAP_VIDEO_OVERLAY` | 0x00000004 | The device supports the Video Overlay interface. A video overlay device typically stores captured images directly in the video memory of a graphics card, with hardware clipping and scaling.
`V4L2_CAP_VBI_CAPTURE` | 0x00000010 | The device supports the Raw VBI Capture interface, providing Teletext and Closed Caption data.
`V4L2_CAP_VBI_OUTPUT` | 0x00000020 | The device supports the Raw VBI Output interface.
`V4L2_CAP_SLICED_VBI_CAPTURE` | 0x00000040 | The device supports the Sliced VBI Capture interface.
`V4L2_CAP_SLICED_VBI_OUTPUT` | 0x00000080 | The device supports the Sliced VBI Output interface.
`V4L2_CAP_RDS_CAPTURE` | 0x00000100 | [to be defined]
`V4L2_CAP_VIDEO_OUTPUT_OVERLAY` | 0x00000200 | The device supports the Video Output Overlay (OSD) interface. Unlike the Video Overlay interface, this is a secondary function of video output devices and overlays an image onto an outgoing video signal. When the driver sets this flag, it must clear the `V4L2_CAP_VIDEO_OVERLAY` flag and vice versa.[a]
`V4L2_CAP_TUNER` | 0x00010000 | The device has some sort of tuner or modulator to receive or emit RF-modulated video signals. For more information about tuner and modulator programming see Section 1.6.
`V4L2_CAP_AUDIO` | 0x00020000 | The device has audio inputs or outputs. It may or may not support audio recording or playback, in PCM or compressed formats. PCM audio support must be implemented as ALSA or OSS interface. For more information on audio inputs and outputs see Section 1.5.
`V4L2_CAP_RADIO` | 0x00040000 | This is a radio receiver.
`V4L2_CAP_READWRITE` | 0x01000000 | The device supports the read() and/or write() I/O methods.
`V4L2_CAP_ASYNCIO` | 0x02000000 | The device supports the asynchronous I/O methods.
`V4L2_CAP_STREAMING` | 0x04000000 | The device supports the streaming I/O method.
Notes: a. The struct v4l2_framebuffer lacks an enum v4l2_buf_type field, therefore the type of overlay is implied by the driver capabilities.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The device is not compatible with this specification.

# ioctl VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU

## Name

VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU -- Enumerate controls and menu control items

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_queryctrl *argp);`

``int ioctl`(int fd, int request, struct v4l2_querymenu *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU

`argp`

## Description

To query the attributes of a control applications set the `id` field of a struct v4l2_queryctrl and call the `VIDIOC_QUERYCTRL` ioctl with a pointer to this structure. The driver fills the rest of the structure or returns an EINVAL error code when the `id` is invalid.

It is possible to enumerate controls by calling `VIDIOC_QUERYCTRL` with successive `id` values starting from `V4L2_CID_BASE` up to and exclusive `V4L2_CID_BASE_LASTP1`. Drivers may return EINVAL if a control in this range is not supported. Further applications can enumerate private controls, which are not defined in this specification, by starting at `V4L2_CID_PRIVATE_BASE` and incrementing `id` until the driver returns EINVAL.

In both cases, when the driver sets the `V4L2_CTRL_FLAG_DISABLED` flag in the `flags` field this control is permanently disabled and should be ignored by the application.[24]

When the application ORs `id` with `V4L2_CTRL_FLAG_NEXT_CTRL` the driver returns the next supported control, or EINVAL if there is none. Drivers which do not support this flag yet always return EINVAL.

Additional information is required for menu controls, the name of menu items. To query them applications set the `id` and `index` fields of struct v4l2_querymenu and call the `VIDIOC_QUERYMENU` ioctl with a pointer to this structure. The driver fills the rest of the structure or returns an EINVAL error code when the `id` or `index` is invalid. Menu items are enumerated by calling `VIDIOC_QUERYMENU` with successive `index` values from struct v4l2_queryctrl `minimum` (0) to `maximum`, inclusive.

See also the examples in Section 1.8.

Table 1. struct `v4l2_queryctrl`

__u32 | `id` | Identifies the control, set by the application. See Table 1-1 for predefined IDs. When the ID is ORed with V4L2_CTRL_FLAG_NEXT_CTRL the driver clears the flag and returns the first control with a higher ID. Drivers which do not support this flag yet always return an EINVAL error code.
enum v4l2_ctrl_type | `type` | Type of control, see Table 3.
__u8 | `name`[32] | Name of the control, a NUL-terminated ASCII string. This information is intended for the user.
__s32 | `minimum` | Minimum value, inclusive. This field gives a lower bound for `V4L2_CTRL_TYPE_INTEGER` controls. It may not be valid for any other type of control, including `V4L2_CTRL_TYPE_INTEGER64` controls. Note this is a signed value.
__s32 | `maximum` | Maximum value, inclusive. This field gives an upper bound for `V4L2_CTRL_TYPE_INTEGER` controls and the highest valid index for `V4L2_CTRL_TYPE_MENU` controls. It may not be valid for any other type of control, including `V4L2_CTRL_TYPE_INTEGER64` controls. Note this is a signed value.
__s32 | `step` | This field gives a step size for `V4L2_CTRL_TYPE_INTEGER` controls. It may not be valid for any other type of control, including `V4L2_CTRL_TYPE_INTEGER64` controls. Generally drivers should not scale hardware control values. It may be necessary for example when the `name` or `id` imply a particular unit and the hardware actually accepts only multiples of said unit. If so, drivers must take care values are properly rounded when scaling, such that errors will not accumulate on repeated read-write cycles. This field gives the smallest change of an integer control actually affecting hardware. Often the information is needed when the user can change controls by keyboard or GUI buttons, rather than a slider. When for example a hardware register accepts values 0-511 and the driver reports 0-65535, step should be 128. Note although signed, the step value is supposed to be always positive.
__s32 | `default_value` | The default value of a `V4L2_CTRL_TYPE_INTEGER`, `_BOOLEAN` or `_MENU` control. Not valid for other types of controls. Drivers reset controls only when the driver is loaded, not later, in particular not when the func-open; is called.
__u32 | `flags` | Control flags, see Table 4.
__u32 | `reserved`[2] | Reserved for future extensions. Drivers must set the array to zero.

Table 2. struct `v4l2_querymenu`

__u32 | `id` | Identifies the control, set by the application from the respective struct v4l2_queryctrl `id`.
__u32 | `index` | Index of the menu item, starting at zero, set by the application.
__u8 | `name`[32] | Name of the menu item, a NUL-terminated ASCII string. This information is intended for the user.
__u32 | `reserved` | Reserved for future extensions. Drivers must set the array to zero.

Table 3. enum v4l2_ctrl_type

Type | `minimum` | `step` | `maximum` | Description
--- | --- | --- | --- | ---
`V4L2_CTRL_TYPE_INTEGER` | any | any | any | An integer-valued control ranging from minimum to maximum inclusive. The step value indicates the increment between values which are actually different on the hardware.
`V4L2_CTRL_TYPE_BOOLEAN` | 0 | 1 | 1 | A boolean-valued control. Zero corresponds to "disabled", and one means "enabled".
`V4L2_CTRL_TYPE_MENU` | 0 | 1 | N-1 | The control has a menu of N choices. The names of the menu items can be enumerated with the `VIDIOC_QUERYMENU` ioctl.
`V4L2_CTRL_TYPE_BUTTON` | 0 | 0 | 0 | A control which performs an action when set. Drivers must ignore the value passed with `VIDIOC_S_CTRL` and return an EINVAL error code on a `VIDIOC_G_CTRL` attempt.
`V4L2_CTRL_TYPE_INTEGER64` | n/a | n/a | n/a | A 64-bit integer valued control. Minimum, maximum and step size cannot be queried.
`V4L2_CTRL_TYPE_CTRL_CLASS` | n/a | n/a | n/a | This is not a control. When `VIDIOC_QUERYCTRL` is called with a control ID equal to a control class code (see Table 3), the ioctl returns the name of the control class and this control type. Older drivers which do not support this feature return an EINVAL error code.

Table 4. Control Flags

`V4L2_CTRL_FLAG_DISABLED` | 0x0001 | This control is permanently disabled and should be ignored by the application. Any attempt to change the control will result in an EINVAL error code.
`V4L2_CTRL_FLAG_GRABBED` | 0x0002 | This control is temporarily unchangeable, for example because another application took over control of the respective resource. Such controls may be displayed specially in a user interface. Attempts to change the control may result in an EBUSY error code.
`V4L2_CTRL_FLAG_READ_ONLY` | 0x0004 | This control is permanently readable only. Any attempt to change the control will result in an EINVAL error code.
`V4L2_CTRL_FLAG_UPDATE` | 0x0008 | A hint that changing this control may affect the value of other controls within the same control class. Applications should update their user interface accordingly.
`V4L2_CTRL_FLAG_INACTIVE` | 0x0010 | This control is not applicable to the current configuration and should be displayed accordingly in a user interface. For example the flag may be set on a MPEG audio level 2 bitrate control when MPEG audio encoding level 1 was selected with another control.
`V4L2_CTRL_FLAG_SLIDER` | 0x0020 | A hint that this control is best represented as a slider-like element in a user interface.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  The struct v4l2_queryctrl `id` is invalid. The struct v4l2_querymenu `id` or `index` is invalid.

# ioctl VIDIOC_QUERYSTD

## Name

VIDIOC_QUERYSTD -- Sense the video standard received by the current input

## Synopsis

``int ioctl`(int fd, int request, v4l2_std_id *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_QUERYSTD

`argp`

## Description

The hardware may be able to detect the current video standard automatically. To do so, applications call `VIDIOC_QUERYSTD` with a pointer to a v4l2_std_id type. The driver stores here a set of candidates, this can be a single flag or a set of supported standards if for example the hardware can only distinguish between 50 and 60 Hz systems. When detection is not possible or fails, the set must contain all standards supported by the current video input or output.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  This ioctl is not supported.

# ioctl VIDIOC_REQBUFS

## Name

VIDIOC_REQBUFS -- Initiate Memory Mapping or User Pointer I/O

## Synopsis

``int ioctl`(int fd, int request, struct v4l2_requestbuffers *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_REQBUFS

`argp`

## Description

This ioctl is used to initiate memory mapped or user pointer I/O. Memory mapped buffers are located in device memory and must be allocated with this ioctl before they can be mapped into the application's address space. User buffers are allocated by applications themselves, and this ioctl is merely used to switch the driver into user pointer I/O mode.

To allocate device buffers applications initialize three fields of a `v4l2_requestbuffers` structure. They set the `type` field to the respective stream or buffer type, the `count` field to the desired number of buffers, and `memory` must be set to `V4L2_MEMORY_MMAP`. When the ioctl is called with a pointer to this structure the driver attempts to allocate the requested number of buffers and stores the actual number allocated in the `count` field. It can be smaller than the number requested, even zero, when the driver runs out of free memory. A larger number is possible when the driver requires more buffers to function correctly.[25] When memory mapping I/O is not supported the ioctl returns an EINVAL error code.

Applications can call `VIDIOC_REQBUFS` again to change the number of buffers, however this cannot succeed when any buffers are still mapped. A `count` value of zero frees all buffers, after aborting or finishing any DMA in progress, an implicit `VIDIOC_STREAMOFF`.

To negotiate user pointer I/O, applications initialize only the `type` field and set `memory` to `V4L2_MEMORY_USERPTR`. When the ioctl is called with a pointer to this structure the driver prepares for user pointer I/O, when this I/O method is not supported the ioctl returns an EINVAL error code.

Table 1. struct `v4l2_requestbuffers`

__u32 | `count` | The number of buffers requested or granted. This field is only used when `memory` is set to `V4L2_MEMORY_MMAP`.
enum v4l2_buf_type | `type` | Type of the stream or buffers, this is the same as the struct v4l2_format `type` field. See Table 3-2 for valid values.
enum v4l2_memory | `memory` | Applications set this field to `V4L2_MEMORY_MMAP` or `V4L2_MEMORY_USERPTR`.
__u32 | `reserved`[2] | A place holder for future extensions and custom (driver defined) buffer types `V4L2_BUF_TYPE_PRIVATE` and higher.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EBUSY

  The driver supports multiple opens and I/O is already in progress, or reallocation of buffers was attempted although one or more are still mapped.

EINVAL

  The buffer type (`type` field) or the requested I/O method (`memory`) is not supported.

# ioctl VIDIOC_STREAMON, VIDIOC_STREAMOFF

## Name

VIDIOC_STREAMON, VIDIOC_STREAMOFF -- Start or stop streaming I/O

## Synopsis

``int ioctl`(int fd, int request, const int *argp);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`request`

  VIDIOC_STREAMON, VIDIOC_STREAMOFF

`argp`

## Description

The `VIDIOC_STREAMON` and `VIDIOC_STREAMOFF` ioctl start and stop the capture or output process during streaming (memory mapping or user pointer) I/O.

Specifically the capture hardware is disabled and no input buffers are filled (if there are any empty buffers in the incoming queue) until `VIDIOC_STREAMON` has been called. Accordingly the output hardware is disabled, no video signal is produced until `VIDIOC_STREAMON` has been called. The ioctl will succeed only when at least one output buffer is in the incoming queue.

The `VIDIOC_STREAMOFF` ioctl, apart of aborting or finishing any DMA in progress, unlocks any user pointer buffers locked in physical memory, and it removes all buffers from the incoming and outgoing queues. That means all images captured but not dequeued yet will be lost, likewise all images enqueued for output but not transmitted yet. I/O returns to the same state as after calling `VIDIOC_REQBUFS` and can be restarted accordingly.

Both ioctls take a pointer to an integer, the desired buffer or stream type. This is the same as struct v4l2_requestbuffers `type`.

Note applications can be preempted for unknown periods right before or after the `VIDIOC_STREAMON` or `VIDIOC_STREAMOFF` calls, there is no notion of starting or stopping "now". Buffer timestamps can be used to synchronize with other events.

## Return Value

On success 0 is returned, on error -1 and the `errno` variable is set appropriately:

EINVAL

  Streaming I/O is not supported, the buffer `type` is not supported, or no buffers have been allocated (memory mapping) or enqueued (output) yet.

# V4L2 mmap()

## Name

v4l2-mmap -- Map device memory into application address space

## Synopsis

    #include <unistd.h>
    #include <sys/mman.h>

``void *mmap`(void *start, size_t length, int prot, int flags, int fd, off_t offset);`

## Arguments

`start`

  Map the buffer to this address in the application's address space. When the `MAP_FIXED` flag is specified, `start` must be a multiple of the pagesize and mmap will fail when the specified address cannot be used. Use of this option is discouraged; applications should just specify a `NULL` pointer here.

`length`

  Length of the memory area to map. This must be the same value as returned by the driver in the struct v4l2_buffer `length` field.

`prot`

  The `prot` argument describes the desired memory protection. Regardless of the device type and the direction of data exchange it should be set to `PROT_READ` | `PROT_WRITE`, permitting read and write access to image buffers. Drivers should support at least this combination of flags. Note the Linux `video-buf` kernel module, which is used by the bttv, saa7134, saa7146, cx88 and vivi driver supports only `PROT_READ` | `PROT_WRITE`. When the driver does not support the desired protection the `mmap()` function fails.

  Note device memory accesses (e. g. the memory on a graphics card with video capturing hardware) may incur a performance penalty compared to main memory accesses, or reads may be significantly slower than writes or vice versa. Other I/O methods may be more efficient in this case.

`flags`

  The `flags` parameter specifies the type of the mapped object, mapping options and whether modifications made to the mapped copy of the page are private to the process or are to be shared with other references.

  `MAP_FIXED` requests that the driver selects no other address than the one specified. If the specified address cannot be used, `mmap()` will fail. If `MAP_FIXED` is specified, `start` must be a multiple of the pagesize. Use of this option is discouraged.

  One of the `MAP_SHARED` or `MAP_PRIVATE` flags must be set. `MAP_SHARED` allows applications to share the mapped memory with other (e. g. child-) processes. Note the Linux `video-buf` module which is used by the bttv, saa7134, saa7146, cx88 and vivi driver supports only `MAP_SHARED`. `MAP_PRIVATE` requests copy-on-write semantics. V4L2 applications should not set the `MAP_PRIVATE`, `MAP_DENYWRITE`, `MAP_EXECUTABLE` or `MAP_ANON` flag.

`fd`

  File descriptor returned by `open()`.

`offset`

  Offset of the buffer in device memory. This must be the same value as returned by the driver in the struct v4l2_buffer `m` union `offset` field.

## Description

The `mmap()` function asks to map `length` bytes starting at `offset` in the memory of the device specified by `fd` into the application address space, preferably at address `start`. This latter address is a hint only, and is usually specified as 0.

Suitable length and offset parameters are queried with the `VIDIOC_QUERYBUF` ioctl. Buffers must be allocated with the `VIDIOC_REQBUFS` ioctl before they can be queried.

To unmap buffers the `munmap()` function is used.

## Return Value

On success `mmap()` returns a pointer to the mapped buffer. On error `MAP_FAILED` (-1) is returned, and the `errno` variable is set appropriately. Possible error codes are:

EBADF

  `fd` is not a valid file descriptor.

EACCES

  `fd` is not open for reading and writing.

EINVAL

  The `start` or `length` or `offset` are not suitable. (E. g. they are too large, or not aligned on a `PAGESIZE` boundary.)

  The `flags` or `prot` value is not supported.

  No buffers have been allocated with the `VIDIOC_REQBUFS` ioctl.

ENOMEM

  Not enough physical or virtual memory was available to complete the request.

# V4L2 munmap()

## Name

v4l2-munmap -- Unmap device memory

## Synopsis

    #include <unistd.h>
    #include <sys/mman.h>

``int munmap`(void *start, size_t length);`

## Arguments

`start`

  Address of the mapped buffer as returned by the `mmap()` function.

`length`

  Length of the mapped buffer. This must be the same value as given to `mmap()` and returned by the driver in the struct v4l2_buffer `length` field.

## Description

Unmaps a previously with the `mmap()` function mapped buffer and frees it, if possible.

## Return Value

On success `munmap()` returns 0, on failure -1 and the `errno` variable is set appropriately:

EINVAL

  The `start` or `length` is incorrect, or no buffers have been mapped yet.

# V4L2 open()

## Name

v4l2-open -- Open a V4L2 device

## Synopsis

    #include <fcntl.h>

``int open`(const char *device_name, int flags);`

## Arguments

`device_name`

  Device to be opened.

`flags`

  Open flags. Access mode must be `O_RDWR`. This is just a technicality, input devices still support only reading and output devices only writing.

  When the `O_NONBLOCK` flag is given, the read() function and the `VIDIOC_DQBUF` ioctl will return the EAGAIN error code when no data is available or no buffer is in the driver outgoing queue, otherwise these functions block until data becomes available. All V4L2 drivers exchanging data with applications must support the `O_NONBLOCK` flag.

  Other flags have no effect.

## Description

To open a V4L2 device applications call `open()` with the desired device name. This function has no side effects; all data format parameters, current input or output, control values or other properties remain unchanged. At the first `open()` call after loading the driver they will be reset to default values, drivers are never in an undefined state.

## Return Value

On success `open` returns the new file descriptor. On error -1 is returned, and the `errno` variable is set appropriately. Possible error codes are:

EACCES

  The caller has no permission to access the device.

EBUSY

  The driver does not support multiple opens and the device is already in use.

ENXIO

  No device corresponding to this device special file exists.

ENOMEM

  Not enough kernel memory was available to complete the request.

EMFILE

  The process already has the maximum number of files open.

ENFILE

  The limit on the total number of files open on the system has been reached.

# V4L2 poll()

## Name

v4l2-poll -- Wait for some event on a file descriptor

## Synopsis

    #include <sys/poll.h>

``int poll`(struct pollfd *ufds, unsigned int nfds, int timeout);`

## Description

With the `poll()` function applications can suspend execution until the driver has captured data or is ready to accept data for output.

When streaming I/O has been negotiated this function waits until a buffer has been filled or displayed and can be dequeued with the `VIDIOC_DQBUF` ioctl. When buffers are already in the outgoing queue of the driver the function returns immediately.

On success `poll()` returns the number of file descriptors that have been selected (that is, file descriptors for which the `revents` field of the respective `pollfd` structure is non-zero). Capture devices set the `POLLIN` and `POLLRDNORM` flags in the `revents` field, output devices the `POLLOUT` and `POLLWRNORM` flags. When the function timed out it returns a value of zero, on failure it returns -1 and the `errno` variable is set appropriately. When the application did not call `VIDIOC_QBUF` or `VIDIOC_STREAMON` yet the `poll()` function succeeds, but sets the `POLLERR` flag in the `revents` field.

When use of the `read()` function has been negotiated and the driver does not capture yet, the `poll` function starts capturing. When that fails it returns a `POLLERR` as above. Otherwise it waits until data has been captured and can be read. When the driver captures continuously (as opposed to, for example, still images) the function may return immediately.

When use of the `write()` function has been negotiated the `poll` function just waits until the driver is ready for a non-blocking `write()` call.

All drivers implementing the `read()` or `write()` function or streaming I/O must also support the `poll()` function.

For more details see the `poll()` manual page.

## Return Value

On success, `poll()` returns the number structures which have non-zero `revents` fields, or zero if the call timed out. On error -1 is returned, and the `errno` variable is set appropriately:

EBADF

  One or more of the `ufds` members specify an invalid file descriptor.

EBUSY

  The driver does not support multiple read or write streams and the device is already in use.

EFAULT

  `ufds` references an inaccessible memory area.

EINTR

  The call was interrupted by a signal.

EINVAL

  The `nfds` argument is greater than `OPEN_MAX`.

# V4L2 read()

## Name

v4l2-read -- Read from a V4L2 device

## Synopsis

    #include <unistd.h>

``ssize_t read`(int fd, void *buf, size_t count);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`buf`

`count`

## Description

`read()` attempts to read up to `count` bytes from file descriptor `fd` into the buffer starting at `buf`. The layout of the data in the buffer is discussed in the respective device interface section, see ##. If `count` is zero, `read()` returns zero and has no other results. If `count` is greater than `SSIZE_MAX`, the result is unspecified. Regardless of the `count` value each `read()` call will provide at most one frame (two fields) worth of data.

By default `read()` blocks until data becomes available. When the `O_NONBLOCK` flag was given to the `open()` function it returns immediately with an EAGAIN error code when no data is available. The `select()` or `poll()` functions can always be used to suspend execution until data becomes available. All drivers supporting the `read()` function must also support `select()` and `poll()`.

Drivers can implement read functionality in different ways, using a single or multiple buffers and discarding the oldest or newest frames once the internal buffers are filled.

`read()` never returns a "snapshot" of a buffer being filled. Using a single buffer the driver will stop capturing when the application starts reading the buffer until the read is finished. Thus only the period of the vertical blanking interval is available for reading, or the capture rate must fall below the nominal frame rate of the video standard.

The behavior of `read()` when called during the active picture period or the vertical blanking separating the top and bottom field depends on the discarding policy. A driver discarding the oldest frames keeps capturing into an internal buffer, continuously overwriting the previously, not read frame, and returns the frame being received at the time of the `read()` call as soon as it is complete.

A driver discarding the newest frames stops capturing until the next `read()` call. The frame being received at `read()` time is discarded, returning the following frame instead. Again this implies a reduction of the capture rate to one half or less of the nominal frame rate. An example of this model is the video read mode of the bttv driver, initiating a DMA to user memory when `read()` is called and returning when the DMA finished.

In the multiple buffer model drivers maintain a ring of internal buffers, automatically advancing to the next free buffer. This allows continuous capturing when the application can empty the buffers fast enough. Again, the behavior when the driver runs out of free buffers depends on the discarding policy.

Applications can get and set the number of buffers used internally by the driver with the `VIDIOC_G_PARM` and `VIDIOC_S_PARM` ioctls. They are optional, however. The discarding policy is not reported and cannot be changed. For minimum requirements see Chapter 4.

## Return Value

On success, the number of bytes read is returned. It is not an error if this number is smaller than the number of bytes requested, or the amount of data required for one frame. This may happen for example because `read()` was interrupted by a signal. On error, -1 is returned, and the `errno` variable is set appropriately. In this case the next read will start at the beginning of a new frame. Possible error codes are:

EAGAIN

  Non-blocking I/O has been selected using O_NONBLOCK and no data was immediately available for reading.

EBADF

  `fd` is not a valid file descriptor or is not open for reading, or the process already has the maximum number of files open.

EBUSY

  The driver does not support multiple read streams and the device is already in use.

EFAULT

  `buf` references an inaccessible memory area.

EINTR

  The call was interrupted by a signal before any data was read.

EIO

  I/O error. This indicates some hardware problem or a failure to communicate with a remote device (USB camera etc.).

EINVAL

  The `read()` function is not supported by this driver, not on this device, or generally not on this type of device.

# V4L2 select()

## Name

v4l2-select -- Synchronous I/O multiplexing

## Synopsis

    #include <sys/time.h>
    #include <sys/types.h>
    #include <unistd.h>

``int select`(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout);`

## Description

With the `select()` function applications can suspend execution until the driver has captured data or is ready to accept data for output.

When streaming I/O has been negotiated this function waits until a buffer has been filled or displayed and can be dequeued with the `VIDIOC_DQBUF` ioctl. When buffers are already in the outgoing queue of the driver the function returns immediately.

On success `select()` returns the total number of bits set in the `fd_set`s. When the function timed out it returns a value of zero. On failure it returns -1 and the `errno` variable is set appropriately. When the application did not call `VIDIOC_QBUF` or `VIDIOC_STREAMON` yet the `select()` function succeeds, setting the bit of the file descriptor in `readfds` or `writefds`, but subsequent `VIDIOC_DQBUF` calls will fail.[26]

When use of the `read()` function has been negotiated and the driver does not capture yet, the `select()` function starts capturing. When that fails, `select()` returns successful and a subsequent `read()` call, which also attempts to start capturing, will return an appropriate error code. When the driver captures continuously (as opposed to, for example, still images) and data is already available the `select()` function returns immediately.

When use of the `write()` function has been negotiated the `select()` function just waits until the driver is ready for a non-blocking `write()` call.

All drivers implementing the `read()` or `write()` function or streaming I/O must also support the `select()` function.

For more details see the `select()` manual page.

## Return Value

On success, `select()` returns the number of descriptors contained in the three returned descriptor sets, which will be zero if the timeout expired. On error -1 is returned, and the `errno` variable is set appropriately; the sets and `timeout` are undefined. Possible error codes are:

EBADF

  One or more of the file descriptor sets specified a file descriptor that is not open.

EBUSY

  The driver does not support multiple read or write streams and the device is already in use.

EFAULT

  The `readfds`, `writefds`, `exceptfds` or `timeout` pointer references an inaccessible memory area.

EINTR

  The call was interrupted by a signal.

EINVAL

  The `nfds` argument is less than zero or greater than `FD_SETSIZE`.

# V4L2 write()

## Name

v4l2-write -- Write to a V4L2 device

## Synopsis

    #include <unistd.h>

``ssize_t write`(int fd, void *buf, size_t count);`

## Arguments

`fd`

  File descriptor returned by `open()`.

`buf`

`count`

## Description

`write()` writes up to `count` bytes to the device referenced by the file descriptor `fd` from the buffer starting at `buf`. When the hardware outputs are not active yet, this function enables them. When `count` is zero, `write()` returns 0 without any other effect.

When the application does not provide more data in time, the previous video frame, raw VBI image, sliced VPS or WSS data is displayed again. Sliced Teletext or Closed Caption data is not repeated, the driver inserts a blank line instead.

## Return Value

On success, the number of bytes written are returned. Zero indicates nothing was written. On error, -1 is returned, and the `errno` variable is set appropriately. In this case the next write will start at the beginning of a new frame. Possible error codes are:

EAGAIN

  Non-blocking I/O has been selected using the `O_NONBLOCK` flag and no buffer space was available to write the data immediately.

EBADF

  `fd` is not a valid file descriptor or is not open for writing.

EBUSY

  The driver does not support multiple write streams and the device is already in use.

EFAULT

  `buf` references an inaccessible memory area.

EINTR

  The call was interrupted by a signal before any data was written.

EIO

  I/O error. This indicates some hardware problem.

EINVAL

  The `write()` function is not supported by this driver, not on this device, or generally not on this type of device.

# Chapter 5. V4L2 Driver Programming

to do

# Chapter 6. Changes

The following chapters document the evolution of the V4L2 API, errata or extensions. They are also intended to help application and driver writers to port or update their code.

## 6.1. Differences between V4L and V4L2

The Video For Linux API was first introduced in Linux 2.1 to unify and replace various TV and radio device related interfaces, developed independently by driver writers in prior years. Starting with Linux 2.5 the much improved V4L2 API replaces the V4L API, although existing drivers will continue to support V4L applications in the future, either directly or through the V4L2 compatibility layer in the `videodev` kernel module translating ioctls on the fly. For a transition period not all drivers will support the V4L2 API.

### 6.1.1. Opening and Closing Devices

For compatibility reasons the character device file names recommended for V4L2 video capture, overlay, radio, teletext and raw vbi capture devices did not change from those used by V4L. They are listed in Chapter 4 and below in Table 6-1.

The V4L `videodev` module automatically assigns minor numbers to drivers in load order, depending on the registered device type. We recommend that V4L2 drivers by default register devices with the same numbers, but the system administrator can assign arbitrary minor numbers using driver module options. The major device number remains 81.

Table 6-1. V4L Device Types, Names and Numbers

Device Type | File Name | Minor Numbers
--- | --- | ---
Video capture and overlay | `/dev/video` and `/dev/bttv0`a, `/dev/video0` to `/dev/video63` | 0-63
Radio receiver | `/dev/radio`b, `/dev/radio0` to `/dev/radio63` | 64-127
Teletext decoder | `/dev/vtx`, `/dev/vtx0` to `/dev/vtx31` | 192-223
Raw VBI capture | `/dev/vbi`, `/dev/vbi0` to `/dev/vbi31` | 224-255
Notes: a. According to Documentation/devices.txt these should be symbolic links to `/dev/video0`. Note the original bttv interface is not compatible with V4L or V4L2. b. According to `Documentation/devices.txt` a symbolic link to `/dev/radio0`.

V4L prohibits (or used to prohibit) multiple opens of a device file. V4L2 drivers may support multiple opens, see Section 1.1 for details and consequences.

V4L drivers respond to V4L2 ioctls with an EINVAL error code. The compatibility layer in the V4L2 `videodev` module can translate V4L ioctl requests to their V4L2 counterpart, however a V4L2 driver usually needs more preparation to become fully V4L compatible. This is covered in more detail in Chapter 5.

### 6.1.2. Querying Capabilities

The V4L `VIDIOCGCAP` ioctl is equivalent to V4L2's `VIDIOC_QUERYCAP`.

The `name` field in struct `video_capability` became `card` in struct v4l2_capability, `type` was replaced by `capabilities`. Note V4L2 does not distinguish between device types like this, better think of basic video input, video output and radio devices supporting a set of related functions like video capturing, video overlay and VBI capturing. See Section 1.1 for an introduction.

struct `video_capability` `type` | struct v4l2_capability `capabilities` flags | Purpose
--- | --- | ---
`VID_TYPE_CAPTURE` | `V4L2_CAP_VIDEO_CAPTURE` | The video capture interface is supported.
`VID_TYPE_TUNER` | `V4L2_CAP_TUNER` | The device has a tuner or modulator.
`VID_TYPE_TELETEXT` | `V4L2_CAP_VBI_CAPTURE` | The raw VBI capture interface is supported.
`VID_TYPE_OVERLAY` | `V4L2_CAP_VIDEO_OVERLAY` | The video overlay interface is supported.
`VID_TYPE_CHROMAKEY` | `V4L2_FBUF_CAP_CHROMAKEY` in field `capability` of struct v4l2_framebuffer | Whether chromakey overlay is supported. For more information on overlay see Section 4.2.
`VID_TYPE_CLIPPING` | `V4L2_FBUF_CAP_LIST_CLIPPING` and `V4L2_FBUF_CAP_BITMAP_CLIPPING` in field `capability` of struct v4l2_framebuffer | Whether clipping the overlaid image is supported, see Section 4.2.
`VID_TYPE_FRAMERAM` | `V4L2_FBUF_CAP_EXTERNOVERLAY` not set in field `capability` of struct v4l2_framebuffer | Whether overlay overwrites frame buffer memory, see Section 4.2.
`VID_TYPE_SCALES` | `-` | This flag indicates if the hardware can scale images. The V4L2 API implies the scale factor by setting the cropping dimensions and image size with the `VIDIOC_S_CROP` and `VIDIOC_S_FMT` ioctl, respectively. The driver returns the closest sizes possible. For more information on cropping and scaling see Section 1.11.
`VID_TYPE_MONOCHROME` | `-` | Applications can enumerate the supported image formats with the `VIDIOC_ENUM_FMT` ioctl to determine if the device supports grey scale capturing only. For more information on image formats see Chapter 2.
`VID_TYPE_SUBCAPTURE` | `-` | Applications can call the `VIDIOC_G_CROP` ioctl to determine if the device supports capturing a subsection of the full picture ("cropping" in V4L2). If not, the ioctl returns the EINVAL error code. For more information on cropping and scaling see Section 1.11.
`VID_TYPE_MPEG_DECODER` | `-` | Applications can enumerate the supported image formats with the `VIDIOC_ENUM_FMT` ioctl to determine if the device supports MPEG streams.
`VID_TYPE_MPEG_ENCODER` | `-` | See above.
`VID_TYPE_MJPEG_DECODER` | `-` | See above.
`VID_TYPE_MJPEG_ENCODER` | `-` | See above.

The `audios` field was replaced by `capabilities` flag `V4L2_CAP_AUDIO`, indicating if the device has any audio inputs or outputs. To determine their number applications can enumerate audio inputs with the `VIDIOC_G_AUDIO` ioctl. The audio ioctls are described in Section 1.5.

The `maxwidth`, `maxheight`, `minwidth` and `minheight` fields were removed. Calling the `VIDIOC_S_FMT` or `VIDIOC_TRY_FMT` ioctl with the desired dimensions returns the closest size possible, taking into account the current video standard, cropping and scaling limitations.

### 6.1.3. Video Sources

V4L provides the `VIDIOCGCHAN` and `VIDIOCSCHAN` ioctl using struct `video_channel` to enumerate the video inputs of a V4L device. The equivalent V4L2 ioctls are `VIDIOC_ENUMINPUT`, `VIDIOC_G_INPUT` and `VIDIOC_S_INPUT` using struct v4l2_input as discussed in Section 1.4.

The `channel` field counting inputs was renamed to `index`, the video input types were renamed as follows:

struct `video_channel` `type` | struct v4l2_input `type`
--- | ---
`VIDEO_TYPE_TV` | `V4L2_INPUT_TYPE_TUNER`
`VIDEO_TYPE_CAMERA` | `V4L2_INPUT_TYPE_CAMERA`

Unlike the `tuners` field expressing the number of tuners of this input, V4L2 assumes each video input is connected to at most one tuner. However a tuner can have more than one input, i. e. RF connectors, and a device can have multiple tuners. The index number of the tuner associated with the input, if any, is stored in field `tuner` of struct v4l2_input. Enumeration of tuners is discussed in Section 1.6.

The redundant `VIDEO_VC_TUNER` flag was dropped. Video inputs associated with a tuner are of type `V4L2_INPUT_TYPE_TUNER`. The `VIDEO_VC_AUDIO` flag was replaced by the `audioset` field. V4L2 considers devices with up to 32 audio inputs. Each set bit in the `audioset` field represents one audio input this video input combines with. For information about audio inputs and how to switch between them see Section 1.5.

The `norm` field describing the supported video standards was replaced by `std`. The V4L specification mentions a flag `VIDEO_VC_NORM` indicating whether the standard can be changed. This flag was a later addition together with the `norm` field and has been removed in the meantime. V4L2 has a similar, albeit more comprehensive approach to video standards, see Section 1.7 for more information.

### 6.1.4. Tuning

The V4L `VIDIOCGTUNER` and `VIDIOCSTUNER` ioctl and struct `video_tuner` can be used to enumerate the tuners of a V4L TV or radio device. The equivalent V4L2 ioctls are `VIDIOC_G_TUNER` and `VIDIOC_S_TUNER` using struct v4l2_tuner. Tuners are covered in Section 1.6.

The `tuner` field counting tuners was renamed to `index`. The fields `name`, `rangelow` and `rangehigh` remained unchanged.

The `VIDEO_TUNER_PAL`, `VIDEO_TUNER_NTSC` and `VIDEO_TUNER_SECAM` flags indicating the supported video standards were dropped. This information is now contained in the associated struct v4l2_input. No replacement exists for the `VIDEO_TUNER_NORM` flag indicating whether the video standard can be switched. The `mode` field to select a different video standard was replaced by a whole new set of ioctls and structures described in Section 1.7. Due to its ubiquity it should be mentioned the BTTV driver supports several standards in addition to the regular `VIDEO_MODE_PAL` (0), `VIDEO_MODE_NTSC`, `VIDEO_MODE_SECAM` and `VIDEO_MODE_AUTO` (3). Namely N/PAL Argentina, M/PAL, N/PAL, and NTSC Japan with numbers 3-6 (sic).

The `VIDEO_TUNER_STEREO_ON` flag indicating stereo reception became `V4L2_TUNER_SUB_STEREO` in field `rxsubchans`. This field also permits the detection of monaural and bilingual audio, see the definition of struct v4l2_tuner for details. Presently no replacement exists for the `VIDEO_TUNER_RDS_ON` and `VIDEO_TUNER_MBS_ON` flags.

The `VIDEO_TUNER_LOW` flag was renamed to `V4L2_TUNER_CAP_LOW` in the struct v4l2_tuner `capability` field.

The `VIDIOCGFREQ` and `VIDIOCSFREQ` ioctl to change the tuner frequency where renamed to `VIDIOC_G_FREQUENCY` and `VIDIOC_S_FREQUENCY`. They take a pointer to a struct v4l2_frequency instead of an unsigned long integer.

### 6.1.5. Image Properties

V4L2 has no equivalent of the `VIDIOCGPICT` and `VIDIOCSPICT` ioctl and struct `video_picture`. The following fields where replaced by V4L2 controls accessible with the `VIDIOC_QUERYCTRL`, `VIDIOC_G_CTRL` and `VIDIOC_S_CTRL` ioctls:

struct `video_picture` | V4L2 Control ID
--- | ---
`brightness` | `V4L2_CID_BRIGHTNESS`
`hue` | `V4L2_CID_HUE`
`colour` | `V4L2_CID_SATURATION`
`contrast` | `V4L2_CID_CONTRAST`
`whiteness` | `V4L2_CID_WHITENESS`

The V4L picture controls are assumed to range from 0 to 65535 with no particular reset value. The V4L2 API permits arbitrary limits and defaults which can be queried with the `VIDIOC_QUERYCTRL` ioctl. For general information about controls see Section 1.8.

The `depth` (average number of bits per pixel) of a video image is implied by the selected image format. V4L2 does not explicitely provide such information assuming applications recognizing the format are aware of the image depth and others need not know. The `palette` field moved into the struct v4l2_pix_format:

struct `video_picture` `palette` | struct v4l2_pix_format `pixfmt`
--- | ---
`VIDEO_PALETTE_GREY` | `V4L2_PIX_FMT_GREY`
`VIDEO_PALETTE_HI240` | `V4L2_PIX_FMT_HI240`a
`VIDEO_PALETTE_RGB565` | `V4L2_PIX_FMT_RGB565`
`VIDEO_PALETTE_RGB555` | `V4L2_PIX_FMT_RGB555`
`VIDEO_PALETTE_RGB24` | `V4L2_PIX_FMT_BGR24`
`VIDEO_PALETTE_RGB32` | `V4L2_PIX_FMT_BGR32`b
`VIDEO_PALETTE_YUV422` | `V4L2_PIX_FMT_YUYV`
`VIDEO_PALETTE_YUYV`c | `V4L2_PIX_FMT_YUYV`
`VIDEO_PALETTE_UYVY` | `V4L2_PIX_FMT_UYVY`
`VIDEO_PALETTE_YUV420` | None
`VIDEO_PALETTE_YUV411` | `V4L2_PIX_FMT_Y41P`d
`VIDEO_PALETTE_RAW` | Nonee
`VIDEO_PALETTE_YUV422P` | `V4L2_PIX_FMT_YUV422P`
`VIDEO_PALETTE_YUV411P` | `V4L2_PIX_FMT_YUV411P`f
`VIDEO_PALETTE_YUV420P` | `V4L2_PIX_FMT_YVU420`
`VIDEO_PALETTE_YUV410P` | `V4L2_PIX_FMT_YVU410`
Notes: a. This is a custom format used by the BTTV driver, not one of the V4L2 standard formats. b. Presumably all V4L RGB formats are little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue swapped variants. For details see Section 2.4. c. `VIDEO_PALETTE_YUV422` and `VIDEO_PALETTE_YUYV` are the same formats. Some V4L drivers respond to one, some to the other. d. Not to be confused with `V4L2_PIX_FMT_YUV411P`, which is a planar format. e. V4L explains this as: "RAW capture (BT848)" f. Not to be confused with `V4L2_PIX_FMT_Y41P`, which is a packed format.

V4L2 image formats are defined in Chapter 2. The image format can be selected with the `VIDIOC_S_FMT` ioctl.

### 6.1.6. Audio

The `VIDIOCGAUDIO` and `VIDIOCSAUDIO` ioctl and struct `video_audio` are used to enumerate the audio inputs of a V4L device. The equivalent V4L2 ioctls are `VIDIOC_G_AUDIO` and `VIDIOC_S_AUDIO` using struct v4l2_audio as discussed in Section 1.5.

The `audio` "channel number" field counting audio inputs was renamed to `index`.

On `VIDIOCSAUDIO` the `mode` field selects one of the `VIDEO_SOUND_MONO`, `VIDEO_SOUND_STEREO`, `VIDEO_SOUND_LANG1` or `VIDEO_SOUND_LANG2` audio demodulation modes. When the current audio standard is BTSC `VIDEO_SOUND_LANG2` refers to SAP and `VIDEO_SOUND_LANG1` is meaningless. Also undocumented in the V4L specification, there is no way to query the selected mode. On `VIDIOCGAUDIO` the driver returns the actually received audio programmes in this field. In the V4L2 API this information is stored in the struct v4l2_tuner `rxsubchans` and `audmode` fields, respectively. See Section 1.6 for more information on tuners. Related to audio modes struct v4l2_audio also reports if this is a mono or stereo input, regardless if the source is a tuner.

The following fields where replaced by V4L2 controls accessible with the `VIDIOC_QUERYCTRL`, `VIDIOC_G_CTRL` and `VIDIOC_S_CTRL` ioctls:

struct `video_audio` | V4L2 Control ID
--- | ---
`volume` | `V4L2_CID_AUDIO_VOLUME`
`bass` | `V4L2_CID_AUDIO_BASS`
`treble` | `V4L2_CID_AUDIO_TREBLE`
`balance` | `V4L2_CID_AUDIO_BALANCE`

To determine which of these controls are supported by a driver V4L provides the `flags` `VIDEO_AUDIO_VOLUME`, `VIDEO_AUDIO_BASS`, `VIDEO_AUDIO_TREBLE` and `VIDEO_AUDIO_BALANCE`. In the V4L2 API the `VIDIOC_QUERYCTRL` ioctl reports if the respective control is supported. Accordingly the `VIDEO_AUDIO_MUTABLE` and `VIDEO_AUDIO_MUTE` flags where replaced by the boolean `V4L2_CID_AUDIO_MUTE` control.

All V4L2 controls have a `step` attribute replacing the struct `video_audio` `step` field. The V4L audio controls are assumed to range from 0 to 65535 with no particular reset value. The V4L2 API permits arbitrary limits and defaults which can be queried with the `VIDIOC_QUERYCTRL` ioctl. For general information about controls see Section 1.8.

### 6.1.7. Frame Buffer Overlay

The V4L2 ioctls equivalent to `VIDIOCGFBUF` and `VIDIOCSFBUF` are `VIDIOC_G_FBUF` and `VIDIOC_S_FBUF`. The `base` field of struct `video_buffer` remained unchanged, except V4L2 defines a flag to indicate non-destructive overlays instead of a `NULL` pointer. All other fields moved into the struct v4l2_pix_format `fmt` substructure of struct v4l2_framebuffer. The `depth` field was replaced by `pixelformat`. See Section 2.4 for a list of RGB formats and their respective color depths.

Instead of the special ioctls `VIDIOCGWIN` and `VIDIOCSWIN` V4L2 uses the general-purpose data format negotiation ioctls `VIDIOC_G_FMT` and `VIDIOC_S_FMT`. They take a pointer to a struct v4l2_format as argument. Here the `win` member of the `fmt` union is used, a struct v4l2_window.

The `x`, `y`, `width` and `height` fields of struct `video_window` moved into struct v4l2_rect substructure `w` of struct `v4l2_window`. The `chromakey`, `clips`, and `clipcount` fields remained unchanged. Struct `video_clip` was renamed to struct v4l2_clip, also containing a struct `v4l2_rect`, but the semantics are still the same.

The `VIDEO_WINDOW_INTERLACE` flag was dropped. Instead applications must set the `field` field to `V4L2_FIELD_ANY` or `V4L2_FIELD_INTERLACED`. The `VIDEO_WINDOW_CHROMAKEY` flag moved into struct v4l2_framebuffer, under the new name `V4L2_FBUF_FLAG_CHROMAKEY`.

In V4L, storing a bitmap pointer in `clips` and setting `clipcount` to `VIDEO_CLIP_BITMAP` (-1) requests bitmap clipping, using a fixed size bitmap of 1024 × 625 bits. Struct `v4l2_window` has a separate `bitmap` pointer field for this purpose and the bitmap size is determined by `w.width` and `w.height`.

The `VIDIOCCAPTURE` ioctl to enable or disable overlay was renamed to `VIDIOC_OVERLAY`.

### 6.1.8. Cropping

To capture only a subsection of the full picture V4L defines the `VIDIOCGCAPTURE` and `VIDIOCSCAPTURE` ioctls using struct `video_capture`. The equivalent V4L2 ioctls are `VIDIOC_G_CROP` and `VIDIOC_S_CROP` using struct v4l2_crop, and the related `VIDIOC_CROPCAP` ioctl. This is a rather complex matter, see Section 1.11 for details.

The `x`, `y`, `width` and `height` fields moved into struct v4l2_rect substructure `c` of struct `v4l2_crop`. The `decimation` field was dropped. In the V4L2 API the scaling factor is implied by the size of the cropping rectangle and the size of the captured or overlaid image.

The `VIDEO_CAPTURE_ODD` and `VIDEO_CAPTURE_EVEN` flags to capture only the odd or even field, respectively, were replaced by `V4L2_FIELD_TOP` and `V4L2_FIELD_BOTTOM` in the field named `field` of struct v4l2_pix_format and struct v4l2_window. These structures are used to select a capture or overlay format with the `VIDIOC_S_FMT` ioctl.

### 6.1.9. Reading Images, Memory Mapping

#### 6.1.9.1. Capturing using the read method

There is no essential difference between reading images from a V4L or V4L2 device using the `read()` function, however V4L2 drivers are not required to support this I/O method. Applications can determine if the function is available with the `VIDIOC_QUERYCAP` ioctl. All V4L2 devices exchanging data with applications must support the `select()` and `poll()` functions.

To select an image format and size, V4L provides the `VIDIOCSPICT` and `VIDIOCSWIN` ioctls. V4L2 uses the general-purpose data format negotiation ioctls `VIDIOC_G_FMT` and `VIDIOC_S_FMT`. They take a pointer to a struct v4l2_format as argument, here the struct v4l2_pix_format named `pix` of its `fmt` union is used.

For more information about the V4L2 read interface see Section 3.1.

#### 6.1.9.2. Capturing using memory mapping

Applications can read from V4L devices by mapping buffers in device memory, or more often just buffers allocated in DMA-able system memory, into their address space. This avoids the data copying overhead of the read method. V4L2 supports memory mapping as well, with a few differences.

V4L | V4L2
--- | ---
| The image format must be selected before buffers are allocated, with the `VIDIOC_S_FMT` ioctl. When no format is selected the driver may use the last, possibly by another application requested format.
Applications cannot change the number of buffers. The it is built into the driver, unless it has a module option to change the number when the driver module is loaded. | The `VIDIOC_REQBUFS` ioctl allocates the desired number of buffers, this is a required step in the initialization sequence.
Drivers map all buffers as one contiguous range of memory. The `VIDIOCGMBUF` ioctl is available to query the number of buffers, the offset of each buffer from the start of the virtual file, and the overall amount of memory used, which can be used as arguments for the `mmap()` function. | Buffers are individually mapped. The offset and size of each buffer can be determined with the `VIDIOC_QUERYBUF` ioctl.
The `VIDIOCMCAPTURE` ioctl prepares a buffer for capturing. It also determines the image format for this buffer. The ioctl returns immediately, eventually with an EAGAIN error code if no video signal had been detected. When the driver supports more than one buffer applications can call the ioctl multiple times and thus have multiple outstanding capture requests. The `VIDIOCSYNC` ioctl suspends execution until a particular buffer has been filled. | Drivers maintain an incoming and outgoing queue. `VIDIOC_QBUF` enqueues any empty buffer into the incoming queue. Filled buffers are dequeued from the outgoing queue with the `VIDIOC_DQBUF` ioctl. To wait until filled buffers become available this function, `select()` or `poll()` can be used. The `VIDIOC_STREAMON` ioctl must be called once after enqueuing one or more buffers to start capturing. Its counterpart `VIDIOC_STREAMOFF` stops capturing and dequeues all buffers from both queues. Applications can query the signal status, if known, with the `VIDIOC_ENUMINPUT` ioctl.

For a more in-depth discussion of memory mapping and examples, see Section 3.2.

### 6.1.10. Reading Raw VBI Data

Originally the V4L API did not specify a raw VBI capture interface, only the device file `/dev/vbi` was reserved for this purpose. The only driver supporting this interface was the BTTV driver, de-facto defining the V4L VBI interface. Reading from the device yields a raw VBI image with the following parameters:

struct v4l2_vbi_format | V4L, BTTV driver
--- | ---
sampling_rate | 28636363 Hz NTSC (or any other 525-line standard); 35468950 Hz PAL and SECAM (625-line standards)
offset | ?
samples_per_line | 2048
sample_format | V4L2_PIX_FMT_GREY. The last four bytes (a machine endianess integer) contain a frame counter.
start[] | 10, 273 NTSC; 22, 335 PAL and SECAM
count[] | 16, 16a
flags | 0
Notes: a. Old driver versions used different values, eventually the custom `BTTV_VBISIZE` ioctl was added to query the correct values.

Undocumented in the V4L specification, in Linux 2.3 the `VIDIOCGVBIFMT` and `VIDIOCSVBIFMT` ioctls using struct `vbi_format` were added to determine the VBI image parameters. These ioctls are only partially compatible with the V4L2 VBI interface specified in Section 4.7.

An `offset` field does not exist, `sample_format` is supposed to be `VIDEO_PALETTE_RAW`, equivalent to `V4L2_PIX_FMT_GREY`. The remaining fields are probably equivalent to struct v4l2_vbi_format.

Apparently only the Zoran (ZR 36120) driver implements these ioctls. The semantics differ from those specified for V4L2 in two ways. The parameters are reset on `open()` and `VIDIOCSVBIFMT` always returns an EINVAL error code if the parameters are invalid.

### 6.1.11. Miscellaneous

V4L2 has no equivalent of the `VIDIOCGUNIT` ioctl. Applications can find the VBI device associated with a video capture device (or vice versa) by reopening the device and requesting VBI data. For details see Section 1.1.

No replacement exists for `VIDIOCKEY`, and the V4L functions for microcode programming. A new interface for MPEG compression and playback devices is documented in Section 1.9.

## 6.2. Changes of the V4L2 API

Soon after the V4L API was added to the kernel it was criticised as too inflexible. In August 1998 Bill Dirks proposed a number of improvements and began to work on documentation, example drivers and applications. With the help of other volunteers this eventually became the V4L2 API, not just an extension but a replacement for the V4L API. However it took another four years and two stable kernel releases until the new API was finally accepted for inclusion into the kernel in its present form.

### 6.2.1. Early Versions

1998-08-20: First version.

1998-08-27: The `select()` function was introduced.

1998-09-10: New video standard interface.

1998-09-18: The `VIDIOC_NONCAP` ioctl was replaced by the otherwise meaningless `O_TRUNC` `open()` flag, and the aliases `O_NONCAP` and `O_NOIO` were defined. Applications can set this flag if they intend to access controls only, as opposed to capture applications which need exclusive access. The `VIDEO_STD_XXX` identifiers are now ordinals instead of flags, and the `video_std_construct()` helper function takes id and transmission arguments.

1998-09-28: Revamped video standard. Made video controls individually enumerable.

1998-10-02: The `id` field was removed from struct `video_standard` and the color subcarrier fields were renamed. The `VIDIOC_QUERYSTD` ioctl was renamed to `VIDIOC_ENUMSTD`, `VIDIOC_G_INPUT` to `VIDIOC_ENUMINPUT`. A first draft of the Codec API was released.

1998-11-08: Many minor changes. Most symbols have been renamed. Some material changes to struct v4l2_capability.

1998-11-12: The read/write directon of some ioctls was misdefined.

1998-11-14: `V4L2_PIX_FMT_RGB24` changed to `V4L2_PIX_FMT_BGR24`, and `V4L2_PIX_FMT_RGB32` changed to `V4L2_PIX_FMT_BGR32`. Audio controls are now accessible with the `VIDIOC_G_CTRL` and `VIDIOC_S_CTRL` ioctls under names starting with `V4L2_CID_AUDIO`. The `V4L2_MAJOR` define was removed from `videodev.h` since it was only used once in the `videodev` kernel module. The `YUV422` and `YUV411` planar image formats were added.

1998-11-28: A few ioctl symbols changed. Interfaces for codecs and video output devices were added.

1999-01-14: A raw VBI capture interface was added.

1999-01-19: The `VIDIOC_NEXTBUF` ioctl was removed.

### 6.2.2. V4L2 Version 0.16 1999-01-31

1999-01-27: There is now one QBUF ioctl, VIDIOC_QWBUF and VIDIOC_QRBUF are gone. VIDIOC_QBUF takes a v4l2_buffer as a parameter. Added digital zoom (cropping) controls.

### 6.2.3. V4L2 Version 0.18 1999-03-16

Added a v4l to V4L2 ioctl compatibility layer to videodev.c. Driver writers, this changes how you implement your ioctl handler. See the Driver Writer's Guide. Added some more control id codes.

### 6.2.4. V4L2 Version 0.19 1999-06-05

1999-03-18: Fill in the category and catname fields of v4l2_queryctrl objects before passing them to the driver. Required a minor change to the VIDIOC_QUERYCTRL handlers in the sample drivers.

1999-03-31: Better compatibility for v4l memory capture ioctls. Requires changes to drivers to fully support new compatibility features, see Driver Writer's Guide and v4l2cap.c. Added new control IDs: V4L2_CID_HFLIP, _VFLIP. Changed V4L2_PIX_FMT_YUV422P to _YUV422P, and _YUV411P to _YUV411P.

1999-04-04: Added a few more control IDs.

1999-04-07: Added the button control type.

1999-05-02: Fixed a typo in videodev.h, and added the V4L2_CTRL_FLAG_GRAYED (later V4L2_CTRL_FLAG_GRABBED) flag.

1999-05-20: Definition of VIDIOC_G_CTRL was wrong causing a malfunction of this ioctl.

1999-06-05: Changed the value of V4L2_CID_WHITENESS.

### 6.2.5. V4L2 Version 0.20 (1999-09-10)

Version 0.20 introduced a number of changes which were not backward compatible with 0.19 and earlier versions. Purpose of these changes was to simplify the API, while making it more extensible and following common Linux driver API conventions.

1. Some typos in `V4L2_FMT_FLAG` symbols were fixed. struct v4l2_clip was changed for compatibility with v4l. (1999-08-30)

2. `V4L2_TUNER_SUB_LANG1` was added. (1999-09-05)

3. All ioctl() commands that used an integer argument now take a pointer to an integer. Where it makes sense, ioctls will return the actual new value in the integer pointed to by the argument, a common convention in the V4L2 API. The affected ioctls are: VIDIOC_PREVIEW, VIDIOC_STREAMON, VIDIOC_STREAMOFF, VIDIOC_S_FREQ, VIDIOC_S_INPUT, VIDIOC_S_OUTPUT, VIDIOC_S_EFFECT. For example

       err = ioctl (fd, VIDIOC_XXX, V4L2_XXX);

   becomes

       int a = V4L2_XXX; err = ioctl(fd, VIDIOC_XXX, &a);

4. All the different get- and set-format commands were swept into one `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctl taking a union and a type field selecting the union member as parameter. Purpose is to simplify the API by eliminating several ioctls and to allow new and driver private data streams without adding new ioctls.

   This change obsoletes the following ioctls: `VIDIOC_S_INFMT`, `VIDIOC_G_INFMT`, `VIDIOC_S_OUTFMT`, `VIDIOC_G_OUTFMT`, `VIDIOC_S_VBIFMT` and `VIDIOC_G_VBIFMT`. The image format structure `v4l2_format` was renamed to struct v4l2_pix_format, while struct v4l2_format is now the envelopping structure for all format negotiations.

5. Similar to the changes above, the `VIDIOC_G_PARM` and `VIDIOC_S_PARM` ioctls were merged with `VIDIOC_G_OUTPARM` and `VIDIOC_S_OUTPARM`. A `type` field in the new struct v4l2_streamparm selects the respective union member.

   This change obsoletes the `VIDIOC_G_OUTPARM` and `VIDIOC_S_OUTPARM` ioctls.

6. Control enumeration was simplified, and two new control flags were introduced and one dropped. The `catname` field was replaced by a `group` field.

   Drivers can now flag unsupported and temporarily unavailable controls with `V4L2_CTRL_FLAG_DISABLED` and `V4L2_CTRL_FLAG_GRABBED` respectively. The `group` name indicates a possibly narrower classification than the `category`. In other words, there may be multiple groups within a category. Controls within a group would typically be drawn within a group box. Controls in different categories might have a greater separation, or may even appear in separate windows.

7. The struct v4l2_buffer `timestamp` was changed to a 64 bit integer, containing the sampling or output time of the frame in nanoseconds. Additionally timestamps will be in absolute system time, not starting from zero at the beginning of a stream. The data type name for timestamps is stamp_t, defined as a signed 64-bit integer. Output devices should not send a buffer out until the time in the timestamp field has arrived. I would like to follow SGI's lead, and adopt a multimedia timestamping system like their UST (Unadjusted System Time). See http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is no longer valid.] UST uses timestamps that are 64-bit signed integers (not struct timeval's) and given in nanosecond units. The UST clock starts at zero when the system is booted and runs continuously and uniformly. It takes a little over 292 years for UST to overflow. There is no way to set the UST clock. The regular Linux time-of-day clock can be changed periodically, which would cause errors if it were being used for timestamping a multimedia stream. A real UST style clock will require some support in the kernel that is not there yet. But in anticipation, I will change the timestamp field to a 64-bit integer, and I will change the v4l2_masterclock_gettime() function (used only by drivers) to return a 64-bit integer.

8. A `sequence` field was added to struct v4l2_buffer. The `sequence` field counts captured frames, it is ignored by output devices. When a capture driver drops a frame, the sequence number of that frame is skipped.

### 6.2.6. V4L2 Version 0.20 incremental changes

1999-12-23: In struct v4l2_vbi_format the `reserved1` field became `offset`. Previously drivers were required to clear the `reserved1` field.

2000-01-13: The `V4L2_FMT_FLAG_NOT_INTERLACED` flag was added.

2000-07-31: The `linux/poll.h` header is now included by `videodev.h` for compatibility with the original `videodev.h` file.

2000-11-20: `V4L2_TYPE_VBI_OUTPUT` and `V4L2_PIX_FMT_Y41P` were added.

2000-11-25: `V4L2_TYPE_VBI_INPUT` was added.

2000-12-04: A couple typos in symbol names were fixed.

2001-01-18: To avoid namespace conflicts the `fourcc` macro defined in the `videodev.h` header file was renamed to `v4l2_fourcc`.

2001-01-25: A possible driver-level compatibility problem between the `videodev.h` file in Linux 2.4.0 and the `videodev.h` file included in the `videodevX` patch was fixed. Users of an earlier version of `videodevX` on Linux 2.4.0 should recompile their V4L and V4L2 drivers.

2001-01-26: A possible kernel-level incompatibility between the `videodev.h` file in the `videodevX` patch and the `videodev.h` file in Linux 2.2.x with devfs patches applied was fixed.

2001-03-02: Certain V4L ioctls which pass data in both direction although they are defined with read-only parameter, did not work correctly through the backward compatibility layer. [Solution?]

2001-04-13: Big endian 16-bit RGB formats were added.

2001-09-17: New YUV formats and the `VIDIOC_G_FREQUENCY` and `VIDIOC_S_FREQUENCY` ioctls were added. (The old `VIDIOC_G_FREQ` and `VIDIOC_S_FREQ` ioctls did not take multiple tuners into account.)

2000-09-18: `V4L2_BUF_TYPE_VBI` was added. This may break compatibility as the `VIDIOC_G_FMT` and `VIDIOC_S_FMT` ioctls may fail now if the struct `v4l2_fmt` `type` field does not contain `V4L2_BUF_TYPE_VBI`. In the documentation of the struct v4l2_vbi_format `offset` field the ambiguous phrase "rising edge" was changed to "leading edge".

### 6.2.7. V4L2 Version 0.20 2000-11-23

A number of changes were made to the raw VBI interface.

1. Figures clarifying the line numbering scheme were added to the V4L2 API specification. The `start`[0] and `start`[1] fields no longer count line numbers beginning at zero. Rationale: a) The previous definition was unclear. b) The `start`[] values are ordinal numbers. c) There is no point in inventing a new line numbering scheme. We now use line number as defined by ITU-R, period. Compatibility: Add one to the start values. Applications depending on the previous semantics may not function correctly.

2. The restriction "count[0] > 0 and count[1] > 0" has been relaxed to "(count[0] + count[1]) > 0". Rationale: Drivers may allocate resources at scan line granularity and some data services are transmitted only on the first field. The comment that both `count` values will usually be equal is misleading and pointless and has been removed. This change breaks compatibility with earlier versions: Drivers may return EINVAL, applications may not function correctly.

3. Drivers are again permitted to return negative (unknown) start values as proposed earlier. Why this feature was dropped is unclear. This change may break compatibility with applications depending on the start values being positive. The use of `EBUSY` and `EINVAL` error codes with the `VIDIOC_S_FMT` ioctl was clarified. The EBUSY error code was finally documented, and the `reserved2` field which was previously mentioned only in the `videodev.h` header file.

4. New buffer types `V4L2_TYPE_VBI_INPUT` and `V4L2_TYPE_VBI_OUTPUT` were added. The former is an alias for the old `V4L2_TYPE_VBI`, the latter was missing in the `videodev.h` file.

### 6.2.8. V4L2 Version 0.20 2002-07-25

Added sliced VBI interface proposal.

### 6.2.9. V4L2 in Linux 2.5.46, 2002-10

Around October-November 2002, prior to an announced feature freeze of Linux 2.5, the API was revised, drawing from experience with V4L2 0.20. This unnamed version was finally merged into Linux 2.5.46.

1. As specified in Section 1.1.2, drivers must make related device functions available under all minor device numbers.

2. The `open()` function requires access mode `O_RDWR` regardless of the device type. All V4L2 drivers exchanging data with applications must support the `O_NONBLOCK` flag. The `O_NOIO` flag, a V4L2 symbol which aliased the meaningless `O_TRUNC` to indicate accesses without data exchange (panel applications) was dropped. Drivers must stay in "panel mode" until the application attempts to initiate a data exchange, see Section 1.1.

3. The struct v4l2_capability changed dramatically. Note that also the size of the structure changed, which is encoded in the ioctl request code, thus older V4L2 devices will respond with an EINVAL error code to the new `VIDIOC_QUERYCAP` ioctl.

   There are new fields to identify the driver, a new (as of yet unspecified) device function `V4L2_CAP_RDS_CAPTURE`, the `V4L2_CAP_AUDIO` flag indicates if the device has any audio connectors, another I/O capability `V4L2_CAP_ASYNCIO` can be flagged. In response to these changes the `type` field became a bit set and was merged into the `flags` field. `V4L2_FLAG_TUNER` was renamed to `V4L2_CAP_TUNER`, `V4L2_CAP_VIDEO_OVERLAY` replaced `V4L2_FLAG_PREVIEW` and `V4L2_CAP_VBI_CAPTURE` and `V4L2_CAP_VBI_OUTPUT` replaced `V4L2_FLAG_DATA_SERVICE`. `V4L2_FLAG_READ` and `V4L2_FLAG_WRITE` were merged into `V4L2_CAP_READWRITE`.

   The redundant fields `inputs`, `outputs` and `audios` were removed. These properties can be determined as described in Section 1.4 and Section 1.5.

   The somewhat volatile and therefore barely useful fields `maxwidth`, `maxheight`, `minwidth`, `minheight`, `maxframerate` were removed. This information is available as described in Section 1.10 and Section 1.7.

   `V4L2_FLAG_SELECT` was removed. We believe the select() function is important enough to require support of it in all V4L2 drivers exchanging data with applications. The redundant `V4L2_FLAG_MONOCHROME` flag was removed, this information is available as described in Section 1.10.

4. In struct v4l2_input the `assoc_audio` field and the `capability` field and its only flag `V4L2_INPUT_CAP_AUDIO` was replaced by the new `audioset` field. Instead of linking one video input to one audio input this field reports all audio inputs this video input combines with.

   New fields are `tuner` (reversing the former link from tuners to video inputs), `std` and `status`.

   Accordingly struct v4l2_output lost its `capability` and `assoc_audio` fields. `audioset`, `modulator` and `std` where added instead.

5. The struct v4l2_audio field `audio` was renamed to `index`, for consistency with other structures. A new capability flag `V4L2_AUDCAP_STEREO` was added to indicated if the audio input in question supports stereo sound. `V4L2_AUDCAP_EFFECTS` and the corresponding `V4L2_AUDMODE` flags where removed. This can be easily implemented using controls. (However the same applies to AVL which is still there.)

   Again for consistency the struct v4l2_audioout field `audio` was renamed to `index`.

6. The struct v4l2_tuner `input` field was replaced by an `index` field, permitting devices with multiple tuners. The link between video inputs and tuners is now reversed, inputs point to their tuner. The `std` substructure became a simple set (more about this below) and moved into struct v4l2_input. A `type` field was added.

   Accordingly in struct v4l2_modulator the `output` was replaced by an `index` field.

   In struct v4l2_frequency the `port` field was replaced by a `tuner` field containing the respective tuner or modulator index number. A tuner `type` field was added and the `reserved` field became larger for future extensions (satellite tuners in particular).

7. The idea of completely transparent video standards was dropped. Experience showed that applications must be able to work with video standards beyond presenting the user a menu. Instead of enumerating supported standards with an ioctl applications can now refer to standards by v4l2_std_id and symbols defined in the `videodev2.h` header file. For details see Section 1.7. The `VIDIOC_G_STD` and `VIDIOC_S_STD` now take a pointer to this type as argument. `VIDIOC_QUERYSTD` was added to autodetect the received standard, if the hardware has this capability. In struct v4l2_standard an `index` field was added for `VIDIOC_ENUMSTD`. A v4l2_std_id field named `id` was added as machine readable identifier, also replacing the `transmission` field. The misleading `framerate` field was renamed to `frameperiod`. The now obsolete `colorstandard` information, originally needed to distguish between variations of standards, were removed.

   Struct `v4l2_enumstd` ceased to be. `VIDIOC_ENUMSTD` now takes a pointer to a struct v4l2_standard directly. The information which standards are supported by a particular video input or output moved into struct v4l2_input and struct v4l2_output fields named `std`, respectively.

8. The struct v4l2_queryctrl fields `category` and `group` did not catch on and/or were not implemented as expected and therefore removed.

9. The `VIDIOC_TRY_FMT` ioctl was added to negotiate data formats as with `VIDIOC_S_FMT`, but without the overhead of programming the hardware and regardless of I/O in progress.

   In struct v4l2_format the `fmt` union was extended to contain struct v4l2_window. All image format negotiations are now possible with `VIDIOC_G_FMT`, `VIDIOC_S_FMT` and `VIDIOC_TRY_FMT`; ioctl. The `VIDIOC_G_WIN` and `VIDIOC_S_WIN` ioctls to prepare for a video overlay were removed. The `type` field changed to type enum v4l2_buf_type and the buffer type names changed as follows.

   Old defines | enum v4l2_buf_type
   --- | ---
   `V4L2_BUF_TYPE_CAPTURE` | `V4L2_BUF_TYPE_VIDEO_CAPTURE`
   `V4L2_BUF_TYPE_CODECIN` | Omitted for now
   `V4L2_BUF_TYPE_CODECOUT` | Omitted for now
   `V4L2_BUF_TYPE_EFFECTSIN` | Omitted for now
   `V4L2_BUF_TYPE_EFFECTSIN2` | Omitted for now
   `V4L2_BUF_TYPE_EFFECTSOUT` | Omitted for now
   `V4L2_BUF_TYPE_VIDEOOUT` | `V4L2_BUF_TYPE_VIDEO_OUTPUT`
   `-` | `V4L2_BUF_TYPE_VIDEO_OVERLAY`
   `-` | `V4L2_BUF_TYPE_VBI_CAPTURE`
   `-` | `V4L2_BUF_TYPE_VBI_OUTPUT`
   `-` | `V4L2_BUF_TYPE_SLICED_VBI_CAPTURE`
   `-` | `V4L2_BUF_TYPE_SLICED_VBI_OUTPUT`
   `V4L2_BUF_TYPE_PRIVATE_BASE` | `V4L2_BUF_TYPE_PRIVATE`

10. In struct v4l2_fmtdesc a enum v4l2_buf_type field named `type` was added as in struct v4l2_format. The `VIDIOC_ENUM_FBUFFMT` ioctl is no longer needed and was removed. These calls can be replaced by `VIDIOC_ENUM_FMT` with type `V4L2_BUF_TYPE_VIDEO_OVERLAY`.

11. In struct v4l2_pix_format the `depth` field was removed, assuming applications which recognize the format by its four-character-code already know the color depth, and others do not care about it. The same rationale lead to the removal of the `V4L2_FMT_FLAG_COMPRESSED` flag. The `V4L2_FMT_FLAG_SWCONVECOMPRESSED` flag was removed because drivers are not supposed to convert images in kernel space. A user library of conversion functions should be provided instead. The `V4L2_FMT_FLAG_BYTESPERLINE` flag was redundant. Applications can set the `bytesperline` field to zero to get a reasonable default. Since the remaining flags were replaced as well, the `flags` field itself was removed.

    The interlace flags were replaced by a enum v4l2_field value in a newly added `field` field.

    Old flag | enum v4l2_field
    --- | ---
    `V4L2_FMT_FLAG_NOT_INTERLACED` | ?
    `V4L2_FMT_FLAG_INTERLACED` = `V4L2_FMT_FLAG_COMBINED` | `V4L2_FIELD_INTERLACED`
    `V4L2_FMT_FLAG_TOPFIELD` = `V4L2_FMT_FLAG_ODDFIELD` | `V4L2_FIELD_TOP`
    `V4L2_FMT_FLAG_BOTFIELD` = `V4L2_FMT_FLAG_EVENFIELD` | `V4L2_FIELD_BOTTOM`
    `-` | `V4L2_FIELD_SEQ_TB`
    `-` | `V4L2_FIELD_SEQ_BT`
    `-` | `V4L2_FIELD_ALTERNATE`

    The color space flags were replaced by a enum v4l2_colorspace value in a newly added `colorspace` field, where one of `V4L2_COLORSPACE_SMPTE170M`, `V4L2_COLORSPACE_BT878`, `V4L2_COLORSPACE_470_SYSTEM_M` or `V4L2_COLORSPACE_470_SYSTEM_BG` replaces `V4L2_FMT_CS_601YUV`.

12. In struct v4l2_requestbuffers the `type` field was properly defined as enum v4l2_buf_type. Buffer types changed as mentioned above. A new `memory` field of type enum v4l2_memory was added to distinguish between I/O methods using buffers allocated by the driver or the application. See Chapter 3 for details.

13. In struct v4l2_buffer the `type` field was properly defined as enum v4l2_buf_type. Buffer types changed as mentioned above. A `field` field of type enum v4l2_field was added to indicate if a buffer contains a top or bottom field. The old field flags were removed. Since no unadjusted system time clock was added to the kernel as planned, the `timestamp` field changed back from type stamp_t, an unsigned 64 bit integer expressing the sample time in nanoseconds, to struct `timeval`. With the addition of a second memory mapping method the `offset` field moved into union `m`, and a new `memory` field of type enum v4l2_memory was added to distinguish between I/O methods. See Chapter 3 for details.

    The `V4L2_BUF_REQ_CONTIG` flag was used by the V4L compatibility layer, after changes to this code it was no longer needed. The `V4L2_BUF_ATTR_DEVICEMEM` flag would indicate if the buffer was indeed allocated in device memory rather than DMA-able system memory. It was barely useful and so was removed.

14. In struct v4l2_framebuffer the `base[3]` array anticipating double- and triple-buffering in off-screen video memory, however without defining a synchronization mechanism, was replaced by a single pointer. The `V4L2_FBUF_CAP_SCALEUP` and `V4L2_FBUF_CAP_SCALEDOWN` flags were removed. Applications can determine this capability more accurately using the new cropping and scaling interface. The `V4L2_FBUF_CAP_CLIPPING` flag was replaced by `V4L2_FBUF_CAP_LIST_CLIPPING` and `V4L2_FBUF_CAP_BITMAP_CLIPPING`.

15. In struct v4l2_clip the `x`, `y`, `width` and `height` field moved into a `c` substructure of type struct v4l2_rect. The `x` and `y` fields were renamed to `left` and `top`, i. e. offsets to a context dependent origin.

16. In struct v4l2_window the `x`, `y`, `width` and `height` field moved into a `w` substructure as above. A `field` field of type %v4l2-field; was added to distinguish between field and frame (interlaced) overlay.

17. The digital zoom interface, including struct `v4l2_zoomcap`, struct `v4l2_zoom`, `V4L2_ZOOM_NONCAP` and `V4L2_ZOOM_WHILESTREAMING` was replaced by a new cropping and scaling interface. The previously unused struct `v4l2_cropcap` and `v4l2_crop` where redefined for this purpose. See Section 1.11 for details.

18. In struct v4l2_vbi_format the `SAMPLE_FORMAT` field now contains a four-character-code as used to identify video image formats and `V4L2_PIX_FMT_GREY` replaces the `V4L2_VBI_SF_UBYTE` define. The `reserved` field was extended.

19. In struct v4l2_captureparm the type of the `timeperframe` field changed from unsigned long to struct v4l2_fract. This allows the accurate expression of multiples of the NTSC-M frame rate 30000 / 1001. A new field `readbuffers` was added to control the driver behaviour in read I/O mode.

    Similar changes were made to struct v4l2_outputparm.

20. The struct `v4l2_performance` and `VIDIOC_G_PERF` ioctl were dropped. Except when using the read/write I/O method, which is limited anyway, this information is already available to applications.

21. The example transformation from RGB to YCbCr color space in the old V4L2 documentation was inaccurate, this has been corrected in Chapter 2.

### 6.2.10. V4L2 2003-06-19

1. A new capability flag `V4L2_CAP_RADIO` was added for radio devices. Prior to this change radio devices would identify solely by having exactly one tuner whose type field reads `V4L2_TUNER_RADIO`.

2. An optional driver access priority mechanism was added, see Section 1.3 for details.

3. The audio input and output interface was found to be incomplete.

   Previously the `VIDIOC_G_AUDIO` ioctl would enumerate the available audio inputs. An ioctl to determine the current audio input, if more than one combines with the current video input, did not exist. So `VIDIOC_G_AUDIO` was renamed to `VIDIOC_G_AUDIO_OLD`, this ioctl will be removed in the future. The `VIDIOC_ENUMAUDIO` ioctl was added to enumerate audio inputs, while `VIDIOC_G_AUDIO` now reports the current audio input.

   The same changes were made to `VIDIOC_G_AUDOUT` and `VIDIOC_ENUMAUDOUT`.

   Until further the "videodev" module will automatically translate between the old and new ioctls, but drivers and applications must be updated to successfully compile again.

4. The `VIDIOC_OVERLAY` ioctl was incorrectly defined with write-read parameter. It was changed to write-only, while the write-read version was renamed to `VIDIOC_OVERLAY_OLD`. The old ioctl will be removed in the future. Until further the "videodev" kernel module will automatically translate to the new version, so drivers must be recompiled, but not applications.

5. Section 4.2 incorrectly stated that clipping rectangles define regions where the video can be seen. Correct is that clipping rectangles define regions where no video shall be displayed and so the graphics surface can be seen.

6. The `VIDIOC_S_PARM` and `VIDIOC_S_CTRL` ioctls were defined with write-only parameter, inconsistent with other ioctls modifying their argument. They were changed to write-read, while a `_OLD` suffix was added to the write-only versions. The old ioctls will be removed in the future. Drivers and applications assuming a constant parameter need an update.

### 6.2.11. V4L2 2003-11-05

1. In Section 2.4 the following pixel formats were incorrectly transferred from Bill Dirks' V4L2 specification. Descriptions below refer to bytes in memory, in ascending address order.

   Symbol | In this document prior to revision 0.5 | Corrected
   --- | --- | ---
   `V4L2_PIX_FMT_RGB24` | B, G, R | R, G, B
   `V4L2_PIX_FMT_BGR24` | R, G, B | B, G, R
   `V4L2_PIX_FMT_RGB32` | B, G, R, X | R, G, B, X
   `V4L2_PIX_FMT_BGR32` | R, G, B, X | B, G, R, X

   The `V4L2_PIX_FMT_BGR24` example was always correct.

   In Section 6.1.5 the mapping of the V4L `VIDEO_PALETTE_RGB24` and `VIDEO_PALETTE_RGB32` formats to V4L2 pixel formats was accordingly corrected.

2. Unrelated to the fixes above, drivers may still interpret some V4L2 RGB pixel formats differently. These issues have yet to be addressed, for details see Section 2.4.

### 6.2.12. V4L2 in Linux 2.6.6, 2004-05-09

1. The `VIDIOC_CROPCAP` ioctl was incorrectly defined with read-only parameter. It is now defined as write-read ioctl, while the read-only version was renamed to `VIDIOC_CROPCAP_OLD`. The old ioctl will be removed in the future.

### 6.2.13. V4L2 in Linux 2.6.8

1. A new field `input` (former `reserved[0]`) was added to the struct v4l2_buffer structure. Purpose of this field is to alternate between video inputs (e. g. cameras) in step with the video capturing process. This function must be enabled with the new `V4L2_BUF_FLAG_INPUT` flag. The `flags` field is no longer read-only.

### 6.2.14. V4L2 spec erratum 2004-08-01

1. The return value of the V4L2 open()(2) function was incorrectly documented.

2. Audio output ioctls end in -AUDOUT, not -AUDIOOUT.

3. In the Current Audio Input example the `VIDIOC_G_AUDIO` ioctl took the wrong argument.

4. The documentation of the `VIDIOC_QBUF` and `VIDIOC_DQBUF` ioctls did not mention the struct v4l2_buffer `memory` field. It was also missing from examples. Also on the `VIDIOC_DQBUF` page the EIO error code was not documented.

### 6.2.15. V4L2 in Linux 2.6.14

1. A new sliced VBI interface was added. It is documented in Section 4.8 and replaces the interface first proposed in V4L2 specification 0.8.

### 6.2.16. V4L2 in Linux 2.6.15

1. The `VIDIOC_LOG_STATUS` ioctl was added.

2. New video standards `V4L2_STD_NTSC_443`, `V4L2_STD_SECAM_LC`, `V4L2_STD_SECAM_DK` (a set of SECAM D, K and K1), and `V4L2_STD_ATSC` (a set of `V4L2_STD_ATSC_8_VSB` and `V4L2_STD_ATSC_16_VSB`) were defined. Note the `V4L2_STD_525_60` set now includes `V4L2_STD_NTSC_443`. See also Table 3.

3. The `VIDIOC_G_COMP` and `VIDIOC_S_COMP` ioctl were renamed to `VIDIOC_G_MPEGCOMP` and `VIDIOC_S_MPEGCOMP` respectively. Their argument was replaced by a struct `v4l2_mpeg_compression` pointer. (The `VIDIOC_G_MPEGCOMP` and `VIDIOC_S_MPEGCOMP` ioctls where removed in Linux 2.6.25.)

### 6.2.17. V4L2 spec erratum 2005-11-27

The capture example in Appendix B called the `VIDIOC_S_CROP` ioctl without checking if cropping is supported. In the video standard selection example in Section 1.7 the `VIDIOC_S_STD` call used the wrong argument type.

### 6.2.18. V4L2 spec erratum 2006-01-10

1. The `V4L2_IN_ST_COLOR_KILL` flag in struct v4l2_input not only indicates if the color killer is enabled, but also if it is active. (The color killer disables color decoding when it detects no color in the video signal to improve the image quality.)

2. `VIDIOC_S_PARM` is a write-read ioctl, not write-only as stated on its reference page. The ioctl changed in 2003 as noted above.

### 6.2.19. V4L2 spec erratum 2006-02-03

1. In struct v4l2_captureparm and struct v4l2_outputparm the `timeperframe` field gives the time in seconds, not microseconds.

### 6.2.20. V4L2 spec erratum 2006-02-04

1. The `clips` field in struct v4l2_window must point to an array of struct v4l2_clip, not a linked list, because drivers ignore the struct `v4l2_clip`.`next` pointer.

### 6.2.21. V4L2 in Linux 2.6.17

1. New video standard macros were added: `V4L2_STD_NTSC_M_KR` (NTSC M South Korea), and the sets `V4L2_STD_MN`, `V4L2_STD_B`, `V4L2_STD_GH` and `V4L2_STD_DK`. The `V4L2_STD_NTSC` and `V4L2_STD_SECAM` sets now include `V4L2_STD_NTSC_M_KR` and `V4L2_STD_SECAM_LC` respectively.

2. A new `V4L2_TUNER_MODE_LANG1_LANG2` was defined to record both languages of a bilingual program. The use of `V4L2_TUNER_MODE_STEREO` for this purpose is deprecated now. See the `VIDIOC_G_TUNER` section for details.

### 6.2.22. V4L2 spec erratum 2006-09-23 (Draft 0.15)

1. In various places `V4L2_BUF_TYPE_SLICED_VBI_CAPTURE` and `V4L2_BUF_TYPE_SLICED_VBI_OUTPUT` of the sliced VBI interface were not mentioned along with other buffer types.

2. In ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO(2) it was clarified that the struct v4l2_audio `mode` field is a flags field.

3. ioctl VIDIOC_QUERYCAP(2) did not mention the sliced VBI and radio capability flags.

4. In ioctl VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY(2) it was clarified that applications must initialize the tuner `type` field of struct v4l2_frequency before calling `VIDIOC_S_FREQUENCY`.

5. The `reserved` array in struct v4l2_requestbuffers has 2 elements, not 32.

6. In Section 4.3 and Section 4.7 the device file names `/dev/vout` which never caught on were replaced by `/dev/video`.

7. With Linux 2.6.15 the possible range for VBI device minor numbers was extended from 224-239 to 224-255. Accordingly device file names `/dev/vbi0` to `/dev/vbi31` are possible now.

### 6.2.23. V4L2 in Linux 2.6.18

1. New ioctls `VIDIOC_G_EXT_CTRLS`, `VIDIOC_S_EXT_CTRLS` and `VIDIOC_TRY_EXT_CTRLS` were added, a flag to skip unsupported controls with `VIDIOC_QUERYCTRL`, new control types `V4L2_CTRL_TYPE_INTEGER64` and `V4L2_CTRL_TYPE_CTRL_CLASS` (Table 3), and new control flags `V4L2_CTRL_FLAG_READ_ONLY`, `V4L2_CTRL_FLAG_UPDATE`, `V4L2_CTRL_FLAG_INACTIVE` and `V4L2_CTRL_FLAG_SLIDER` (Table 4). See Section 1.9 for details.

### 6.2.24. V4L2 in Linux 2.6.19

1. In struct v4l2_sliced_vbi_cap a buffer type field was added replacing a reserved field. Note on architectures where the size of enum types differs from int types the size of the structure changed. The `VIDIOC_G_SLICED_VBI_CAP` ioctl was redefined from being read-only to write-read. Applications must initialize the type field and clear the reserved fields now. These changes may break the compatibility with older drivers and applications.

2. The ioctls `VIDIOC_ENUM_FRAMESIZES` and `VIDIOC_ENUM_FRAMEINTERVALS` were added.

3. A new pixel format `V4L2_PIX_FMT_RGB444` (Table 2-1) was added.

### 6.2.25. V4L2 spec erratum 2006-10-12 (Draft 0.17)

1. `V4L2_PIX_FMT_HM12` (Table 2-8) is a YUV 4:2:0, not 4:2:2 format.

### 6.2.26. V4L2 in Linux 2.6.21

1. The `videodev2.h` header file is now dual licensed under GNU General Public License version two or later, and under a 3-clause BSD-style license.

### 6.2.27. V4L2 in Linux 2.6.22

1. Two new field orders `V4L2_FIELD_INTERLACED_TB` and `V4L2_FIELD_INTERLACED_BT` were added. See Table 3-8 for details.

2. Three new clipping/blending methods with a global or straight or inverted local alpha value were added to the video overlay interface. See the description of the `VIDIOC_G_FBUF` and `VIDIOC_S_FBUF` ioctls for details.

   A new `global_alpha` field was added to `v4l2_window`, extending the structure. This may break compatibility with applications using a struct `v4l2_window` directly. However the VIDIOC_G/S/TRY_FMT ioctls, which take a pointer to a v4l2_format parent structure with padding bytes at the end, are not affected.

3. The format of the `chromakey` field in struct v4l2_window changed from "host order RGB32" to a pixel value in the same format as the framebuffer. This may break compatibility with existing applications. Drivers supporting the "host order RGB32" format are not known.

### 6.2.28. V4L2 in Linux 2.6.24

1. The pixel formats `V4L2_PIX_FMT_PAL8`, `V4L2_PIX_FMT_YUV444`, `V4L2_PIX_FMT_YUV555`, `V4L2_PIX_FMT_YUV565` and `V4L2_PIX_FMT_YUV32` were added.

### 6.2.29. V4L2 in Linux 2.6.25

1. The pixel formats `V4L2_PIX_FMT_Y16` and `V4L2_PIX_FMT_SBGGR16` were added.

2. New controls `V4L2_CID_POWER_LINE_FREQUENCY`, `V4L2_CID_HUE_AUTO`, `V4L2_CID_WHITE_BALANCE_TEMPERATURE`, `V4L2_CID_SHARPNESS` and `V4L2_CID_BACKLIGHT_COMPENSATION` were added. The controls `V4L2_CID_BLACK_LEVEL`, `V4L2_CID_WHITENESS`, `V4L2_CID_HCENTER` and `V4L2_CID_VCENTER` were deprecated.

3. A Camera controls class was added, with the new controls `V4L2_CID_EXPOSURE_AUTO`, `V4L2_CID_EXPOSURE_ABSOLUTE`, `V4L2_CID_EXPOSURE_AUTO_PRIORITY`, `V4L2_CID_PAN_RELATIVE`, `V4L2_CID_TILT_RELATIVE`, `V4L2_CID_PAN_RESET`, `V4L2_CID_TILT_RESET`, `V4L2_CID_PAN_ABSOLUTE`, `V4L2_CID_TILT_ABSOLUTE`, `V4L2_CID_FOCUS_ABSOLUTE`, `V4L2_CID_FOCUS_RELATIVE` and `V4L2_CID_FOCUS_AUTO`.

4. The `VIDIOC_G_MPEGCOMP` and `VIDIOC_S_MPEGCOMP` ioctls, which were superseded by the extended controls interface in Linux 2.6.18, where finally removed from the `videodev2.h` header file.

## 6.3. Relation of V4L2 to other Linux multimedia APIs

### 6.3.1. X Video Extension

The X Video Extension (abbreviated XVideo or just Xv) is an extension of the X Window system, implemented for example by the XFree86 project. Its scope is similar to V4L2, an API to video capture and output devices for X clients. Xv allows applications to display live video in a window, send window contents to a TV output, and capture or output still images in XPixmaps[27]. With their implementation XFree86 makes the extension available across many operating systems and architectures.

Because the driver is embedded into the X server Xv has a number of advantages over the V4L2 video overlay interface. The driver can easily determine the overlay target, i. e. visible graphics memory or off-screen buffers for a destructive overlay. It can program the RAMDAC for a non-destructive overlay, scaling or color-keying, or the clipping functions of the video capture hardware, always in sync with drawing operations or windows moving or changing their stacking order.

To combine the advantages of Xv and V4L a special Xv driver exists in XFree86 and XOrg, just programming any overlay capable Video4Linux device it finds. To enable it `/etc/X11/XF86Config` must contain these lines:

    Section "Module"
        Load "v4l"
    EndSection

As of XFree86 4.2 this driver still supports only V4L ioctls, however it should work just fine with all V4L2 devices through the V4L2 backward-compatibility layer. Since V4L2 permits multiple opens it is possible (if supported by the V4L2 driver) to capture video while an X client requested video overlay. Restrictions of simultaneous capturing and overlay are discussed in Section 4.2 apply.

Only marginally related to V4L2, XFree86 extended Xv to support hardware YUV to RGB conversion and scaling for faster video playback, and added an interface to MPEG-2 decoding hardware. This API is useful to display images captured with V4L2 devices.

### 6.3.2. Digital Video

V4L2 does not support digital terrestrial, cable or satellite broadcast. A separate project aiming at digital receivers exists. You can find its homepage at http://linuxtv.org. The Linux DVB API has no connection to the V4L2 API except that drivers for hybrid hardware may support both.

### 6.3.3. Audio Interfaces

[to do - OSS/ALSA]

## 6.4. Experimental API Elements

The following V4L2 API elements are currently experimental and may change in the future.

- Video Output Overlay (OSD) Interface, Section 4.4.

- `V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY`, enum v4l2_buf_type, Table 3-2.

- `V4L2_CAP_VIDEO_OUTPUT_OVERLAY`, `VIDIOC_QUERYCAP` ioctl, Table 2.

- `VIDIOC_ENUM_FRAMESIZES` and `VIDIOC_ENUM_FRAMEINTERVALS` ioctls.

- `VIDIOC_G_ENC_INDEX` ioctl.

- `VIDIOC_ENCODER_CMD` and `VIDIOC_TRY_ENCODER_CMD` ioctls.

- `VIDIOC_DBG_G_REGISTER` and `VIDIOC_DBG_S_REGISTER` ioctls.

- `VIDIOC_G_CHIP_IDENT` ioctl.

## 6.5. Obsolete API Elements

The following V4L2 API elements were superseded by new interfaces and should not be implemented in new drivers.

- `VIDIOC_G_MPEGCOMP` and `VIDIOC_S_MPEGCOMP` ioctls. Use Extended Controls, Section 1.9.

# Appendix A. Video For Linux Two Header File

    /*
     *  Video for Linux Two header file
     *
     *  Copyright (C) 1999-2007 the contributors
     *
     *  This program is free software; you can redistribute it and/or modify
     *  it under the terms of the GNU General Public License as published by
     *  the Free Software Foundation; either version 2 of the License, or
     *  (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,
     *  but WITHOUT ANY WARRANTY; without even the implied warranty of
     *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     *  GNU General Public License for more details.
     *
     *  Alternatively you can redistribute this file under the terms of the
     *  BSD license as stated below:
     *
     *  Redistribution and use in source and binary forms, with or without
     *  modification, are permitted provided that the following conditions
     *  are met:
     *  1. Redistributions of source code must retain the above copyright
     *     notice, this list of conditions and the following disclaimer.
     *  2. Redistributions in binary form must reproduce the above copyright
     *     notice, this list of conditions and the following disclaimer in
     *     the documentation and/or other materials provided with the
     *     distribution.
     *  3. The names of its contributors may not be used to endorse or promote
     *     products derived from this software without specific prior written
     *     permission.
     *
     *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
     *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
     *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
     *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     *
     *      Header file for v4l or V4L2 drivers and applications
     * with public API.
     * All kernel-specific stuff were moved to media/v4l2-dev.h, so
     * no #if __KERNEL tests are allowed here
     *
     *      See http://linuxtv.org for more info
     *
     *      Author: Bill Dirks <bill@thedirks.org>
     *              Justin Schoeman
     *              Hans Verkuil <hverkuil@xs4all.nl>
     *              et al.
     */
    #ifndef __LINUX_VIDEODEV2_H
    #define __LINUX_VIDEODEV2_H
    #ifdef __KERNEL__
    #include <linux/time.h>     /* need struct timeval */
    #include <linux/compiler.h> /* need __user */
    #else
    #define __user
    #include <sys/time.h>
    #endif
    #include <linux/ioctl.h>
    #include <linux/types.h>

    /*
     * Common stuff for both V4L1 and V4L2
     * Moved from videodev.h
     */
    #define VIDEO_MAX_FRAME               32

    #define VID_TYPE_CAPTURE        1       /* Can capture */
    #define VID_TYPE_TUNER          2       /* Can tune */
    #define VID_TYPE_TELETEXT       4       /* Does teletext */
    #define VID_TYPE_OVERLAY        8       /* Overlay onto frame buffer */
    #define VID_TYPE_CHROMAKEY      16      /* Overlay by chromakey */
    #define VID_TYPE_CLIPPING       32      /* Can clip */
    #define VID_TYPE_FRAMERAM       64      /* Uses the frame buffer memory */
    #define VID_TYPE_SCALES         128     /* Scalable */
    #define VID_TYPE_MONOCHROME     256     /* Monochrome only */
    #define VID_TYPE_SUBCAPTURE     512     /* Can capture subareas of the image */
    #define VID_TYPE_MPEG_DECODER   1024    /* Can decode MPEG streams */
    #define VID_TYPE_MPEG_ENCODER   2048    /* Can encode MPEG streams */
    #define VID_TYPE_MJPEG_DECODER  4096    /* Can decode MJPEG streams */
    #define VID_TYPE_MJPEG_ENCODER  8192    /* Can encode MJPEG streams */

    /*
     *      M I S C E L L A N E O U S
     */

    /*  Four-character-code (FOURCC) */
    #define v4l2_fourcc(a,b,c,d)\
            (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))

    /*
     *      E N U M S
     */
    enum v4l2_field {
            V4L2_FIELD_ANY           = 0, /* driver can choose from none,
                                             top, bottom, interlaced
                                             depending on whatever it thinks
                                             is approximate ... */
            V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
            V4L2_FIELD_TOP           = 2, /* top field only */
            V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
            V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
            V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
                                             buffer, top-bottom order */
            V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
            V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
                                             separate buffers */
            V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
                                             first and the top field is
                                             transmitted first */
            V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
                                             first and the bottom field is
                                             transmitted first */
    };
    #define V4L2_FIELD_HAS_TOP(field)       \
            ((field) == V4L2_FIELD_TOP      ||\
             (field) == V4L2_FIELD_INTERLACED ||\
             (field) == V4L2_FIELD_INTERLACED_TB ||\
             (field) == V4L2_FIELD_INTERLACED_BT ||\
             (field) == V4L2_FIELD_SEQ_TB   ||\
             (field) == V4L2_FIELD_SEQ_BT)
    #define V4L2_FIELD_HAS_BOTTOM(field)    \
            ((field) == V4L2_FIELD_BOTTOM   ||\
             (field) == V4L2_FIELD_INTERLACED ||\
             (field) == V4L2_FIELD_INTERLACED_TB ||\
             (field) == V4L2_FIELD_INTERLACED_BT ||\
             (field) == V4L2_FIELD_SEQ_TB   ||\
             (field) == V4L2_FIELD_SEQ_BT)
    #define V4L2_FIELD_HAS_BOTH(field)      \
            ((field) == V4L2_FIELD_INTERLACED ||\
             (field) == V4L2_FIELD_INTERLACED_TB ||\
             (field) == V4L2_FIELD_INTERLACED_BT ||\
             (field) == V4L2_FIELD_SEQ_TB ||\
             (field) == V4L2_FIELD_SEQ_BT)

    enum v4l2_buf_type {
            V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
            V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
            V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
            V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
            V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
            V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
            V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
    #if 1 /*KEEP*/
            /* Experimental */
            V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
    #endif
            V4L2_BUF_TYPE_PRIVATE              = 0x80,
    };

    enum v4l2_ctrl_type {
            V4L2_CTRL_TYPE_INTEGER       = 1,
            V4L2_CTRL_TYPE_BOOLEAN       = 2,
            V4L2_CTRL_TYPE_MENU          = 3,
            V4L2_CTRL_TYPE_BUTTON        = 4,
            V4L2_CTRL_TYPE_INTEGER64     = 5,
            V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
    };

    enum v4l2_tuner_type {
            V4L2_TUNER_RADIO             = 1,
            V4L2_TUNER_ANALOG_TV         = 2,
            V4L2_TUNER_DIGITAL_TV        = 3,
    };

    enum v4l2_memory {
            V4L2_MEMORY_MMAP             = 1,
            V4L2_MEMORY_USERPTR          = 2,
            V4L2_MEMORY_OVERLAY          = 3,
    };

    /* see also http://vektor.theorem.ca/graphics/ycbcr/ */
    enum v4l2_colorspace {
            /* ITU-R 601 -- broadcast NTSC/PAL */
            V4L2_COLORSPACE_SMPTE170M     = 1,

            /* 1125-Line (US) HDTV */
            V4L2_COLORSPACE_SMPTE240M     = 2,

            /* HD and modern captures. */
            V4L2_COLORSPACE_REC709        = 3,

            /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
            V4L2_COLORSPACE_BT878         = 4,

            /* These should be useful.  Assume 601 extents. */
            V4L2_COLORSPACE_470_SYSTEM_M  = 5,
            V4L2_COLORSPACE_470_SYSTEM_BG = 6,

            /* I know there will be cameras that send this.  So, this is
             * unspecified chromaticities and full 0-255 on each of the
             * Y'CbCr components
             */
            V4L2_COLORSPACE_JPEG          = 7,

            /* For RGB colourspaces, this is probably a good start. */
            V4L2_COLORSPACE_SRGB          = 8,
    };

    enum v4l2_priority {
            V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
            V4L2_PRIORITY_BACKGROUND  = 1,
            V4L2_PRIORITY_INTERACTIVE = 2,
            V4L2_PRIORITY_RECORD      = 3,
            V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
    };

    struct v4l2_rect {
            __s32   left;
            __s32   top;
            __s32   width;
            __s32   height;
    };

    struct v4l2_fract {
            __u32   numerator;
            __u32   denominator;
    };

    /*
     *      D R I V E R   C A P A B I L I T I E S
     */
    struct v4l2_capability
    {
            __u8    driver[16];     /* i.e.ie; "bttv" */
            __u8    card[32];       /* i.e.ie; "Hauppauge WinTV" */
            __u8    bus_info[32];   /* "PCI:" + pci_name(pci_dev) */
            __u32   version;        /* should use KERNEL_VERSION() */
            __u32   capabilities;   /* Device capabilities */
            __u32   reserved[4];
    };

    /* Values for 'capabilities' field */
    #define V4L2_CAP_VIDEO_CAPTURE          0x00000001  /* Is a video capture device */
    #define V4L2_CAP_VIDEO_OUTPUT           0x00000002  /* Is a video output device */
    #define V4L2_CAP_VIDEO_OVERLAY          0x00000004  /* Can do video overlay */
    #define V4L2_CAP_VBI_CAPTURE            0x00000010  /* Is a raw VBI capture device */
    #define V4L2_CAP_VBI_OUTPUT             0x00000020  /* Is a raw VBI output device */
    #define V4L2_CAP_SLICED_VBI_CAPTURE     0x00000040  /* Is a sliced VBI capture device */
    #define V4L2_CAP_SLICED_VBI_OUTPUT      0x00000080  /* Is a sliced VBI output device */
    #define V4L2_CAP_RDS_CAPTURE            0x00000100  /* RDS data capture */
    #define V4L2_CAP_VIDEO_OUTPUT_OVERLAY   0x00000200  /* Can do video output overlay */

    #define V4L2_CAP_TUNER                  0x00010000  /* has a tuner */
    #define V4L2_CAP_AUDIO                  0x00020000  /* has audio support */
    #define V4L2_CAP_RADIO                  0x00040000  /* is a radio device */

    #define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
    #define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
    #define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */

    /*
     *      V I D E O   I M A G E   F O R M A T
     */
    struct v4l2_pix_format
    {
            __u32                   width;
            __u32                   height;
            __u32                   pixelformat;
            enum v4l2_field         field;
            __u32                   bytesperline;   /* for padding, zero if unused */
            __u32                   sizeimage;
            enum v4l2_colorspace    colorspace;
            __u32                   priv;           /* private data, depends on pixelformat */
    };

    /*      Pixel format         FOURCC                        depth  Description  */
    #define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R','G','B','1') /*  8  RGB-3-3-2     */
    #define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R','4','4','4') /* 16  xxxxrrrr ggggbbbb */
    #define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R','G','B','O') /* 16  RGB-5-5-5     */
    #define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R','G','B','P') /* 16  RGB-5-6-5     */
    #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16  RGB-5-5-5 BE  */
    #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16  RGB-5-6-5 BE  */
    #define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B','G','R','3') /* 24  BGR-8-8-8     */
    #define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R','G','B','3') /* 24  RGB-8-8-8     */
    #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
    #define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
    #define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
    #define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y','1','6',' ') /* 16  Greyscale     */
    #define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P','A','L','8') /*  8  8-bit palette */
    #define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
    #define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
    #define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
    #define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U','Y','V','Y') /* 16  YUV 4:2:2     */
    #define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16  YVU422 planar */
    #define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16  YVU411 planar */
    #define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y','4','1','P') /* 12  YUV 4:1:1     */
    #define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y','4','4','4') /* 16  xxxxyyyy uuuuvvvv */
    #define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y','U','V','O') /* 16  YUV-5-5-5     */
    #define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y','U','V','P') /* 16  YUV-5-6-5     */
    #define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y','U','V','4') /* 32  YUV-8-8-8-8   */

    /* two planes -- one Y, one Cr + Cb interleaved  */
    #define V4L2_PIX_FMT_NV12    v4l2_fourcc('N','V','1','2') /* 12  Y/CbCr 4:2:0  */
    #define V4L2_PIX_FMT_NV21    v4l2_fourcc('N','V','2','1') /* 12  Y/CrCb 4:2:0  */

    /*  The following formats are not defined in the V4L2 specification */
    #define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y','U','V','9') /*  9  YUV 4:1:0     */
    #define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y','U','1','2') /* 12  YUV 4:2:0     */
    #define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y','Y','U','V') /* 16  YUV 4:2:2     */
    #define V4L2_PIX_FMT_HI240   v4l2_fourcc('H','I','2','4') /*  8  8-bit color   */
    #define V4L2_PIX_FMT_HM12    v4l2_fourcc('H','M','1','2') /*  8  YUV 4:2:0 16x16 macroblocks */

    /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
    #define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
    #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16  BGBG.. GRGR.. */

    /* compressed formats */
    #define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M','J','P','G') /* Motion-JPEG   */
    #define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J','P','E','G') /* JFIF JPEG     */
    #define V4L2_PIX_FMT_DV       v4l2_fourcc('d','v','s','d') /* 1394          */
    #define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M','P','E','G') /* MPEG-1/2/4    */

    /*  Vendor-specific formats   */
    #define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W','N','V','A') /* Winnov hw compress */
    #define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
    #define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P','W','C','1') /* pwc older webcam */
    #define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
    #define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */

    /*
     *      F O R M A T   E N U M E R A T I O N
     */
    struct v4l2_fmtdesc
    {
            __u32               index;             /* Format number      */
            enum v4l2_buf_type  type;              /* buffer type        */
            __u32               flags;
            __u8                description[32];   /* Description string */
            __u32               pixelformat;       /* Format fourcc      */
            __u32               reserved[4];
    };

    #define V4L2_FMT_FLAG_COMPRESSED 0x0001

    #if 1 /*KEEP*/
            /* Experimental Frame Size and frame rate enumeration */
    /*
     *      F R A M E   S I Z E   E N U M E R A T I O N
     */
    enum v4l2_frmsizetypes
    {
            V4L2_FRMSIZE_TYPE_DISCRETE      = 1,
            V4L2_FRMSIZE_TYPE_CONTINUOUS    = 2,
            V4L2_FRMSIZE_TYPE_STEPWISE      = 3,
    };

    struct v4l2_frmsize_discrete
    {
            __u32                   width;          /* Frame width [pixel] */
            __u32                   height;         /* Frame height [pixel] */
    };

    struct v4l2_frmsize_stepwise
    {
            __u32                   min_width;      /* Minimum frame width [pixel] */
            __u32                   max_width;      /* Maximum frame width [pixel] */
            __u32                   step_width;     /* Frame width step size [pixel] */
            __u32                   min_height;     /* Minimum frame height [pixel] */
            __u32                   max_height;     /* Maximum frame height [pixel] */
            __u32                   step_height;    /* Frame height step size [pixel] */
    };

    struct v4l2_frmsizeenum
    {
            __u32                   index;          /* Frame size number */
            __u32                   pixel_format;   /* Pixel format */
            __u32                   type;           /* Frame size type the device supports. */

            union {                                 /* Frame size */
                    struct v4l2_frmsize_discrete    discrete;
                    struct v4l2_frmsize_stepwise    stepwise;
            };

            __u32   reserved[2];                    /* Reserved space for future use */
    };

    /*
     *      F R A M E   R A T E   E N U M E R A T I O N
     */
    enum v4l2_frmivaltypes
    {
            V4L2_FRMIVAL_TYPE_DISCRETE      = 1,
            V4L2_FRMIVAL_TYPE_CONTINUOUS    = 2,
            V4L2_FRMIVAL_TYPE_STEPWISE      = 3,
    };

    struct v4l2_frmival_stepwise
    {
            struct v4l2_fract       min;            /* Minimum frame interval [s] */
            struct v4l2_fract       max;            /* Maximum frame interval [s] */
            struct v4l2_fract       step;           /* Frame interval step size [s] */
    };

    struct v4l2_frmivalenum
    {
            __u32                   index;          /* Frame format index */
            __u32                   pixel_format;   /* Pixel format */
            __u32                   width;          /* Frame width */
            __u32                   height;         /* Frame height */
            __u32                   type;           /* Frame interval type the device supports. */

            union {                                 /* Frame interval */
                    struct v4l2_fract               discrete;
                    struct v4l2_frmival_stepwise    stepwise;
            };

            __u32   reserved[2];                    /* Reserved space for future use */
    };
    #endif

    /*
     *      T I M E C O D E
     */
    struct v4l2_timecode
    {
            __u32   type;
            __u32   flags;
            __u8    frames;
            __u8    seconds;
            __u8    minutes;
            __u8    hours;
            __u8    userbits[4];
    };

    /*  Type  */
    #define V4L2_TC_TYPE_24FPS              1
    #define V4L2_TC_TYPE_25FPS              2
    #define V4L2_TC_TYPE_30FPS              3
    #define V4L2_TC_TYPE_50FPS              4
    #define V4L2_TC_TYPE_60FPS              5

    /*  Flags  */
    #define V4L2_TC_FLAG_DROPFRAME          0x0001 /* "drop-frame" mode */
    #define V4L2_TC_FLAG_COLORFRAME         0x0002
    #define V4L2_TC_USERBITS_field          0x000C
    #define V4L2_TC_USERBITS_USERDEFINED    0x0000
    #define V4L2_TC_USERBITS_8BITCHARS      0x0008
    /* The above is based on SMPTE timecodes */

    struct v4l2_jpegcompression
    {
            int quality;

            int  APPn;              /* Number of APP segment to be written,
                                     * must be 0..15 */
            int  APP_len;           /* Length of data in JPEG APPn segment */
            char APP_data[60];      /* Data in the JPEG APPn segment. */

            int  COM_len;           /* Length of data in JPEG COM segment */
            char COM_data[60];      /* Data in JPEG COM segment */

            __u32 jpeg_markers;     /* Which markers should go into the JPEG
                                     * output. Unless you exactly know what
                                     * you do, leave them untouched.
                                     * Inluding less markers will make the
                                     * resulting code smaller, but there will
                                     * be fewer aplications which can read it.
                                     * The presence of the APP and COM marker
                                     * is influenced by APP_len and COM_len
                                     * ONLY, not by this property! */

    #define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
    #define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
    #define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
    #define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
    #define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
                                            * allways use APP0 */
    };

    /*
     *      M E M O R Y - M A P P I N G   B U F F E R S
     */
    struct v4l2_requestbuffers
    {
            __u32                   count;
            enum v4l2_buf_type      type;
            enum v4l2_memory        memory;
            __u32                   reserved[2];
    };

    struct v4l2_buffer
    {
            __u32                   index;
            enum v4l2_buf_type      type;
            __u32                   bytesused;
            __u32                   flags;
            enum v4l2_field         field;
            struct timeval          timestamp;
            struct v4l2_timecode    timecode;
            __u32                   sequence;

            /* memory location */
            enum v4l2_memory        memory;
            union {
                    __u32           offset;
                    unsigned long   userptr;
            } m;
            __u32                   length;
            __u32                   input;
            __u32                   reserved;
    };

    /*  Flags for 'flags' field */
    #define V4L2_BUF_FLAG_MAPPED    0x0001  /* Buffer is mapped (flag) */
    #define V4L2_BUF_FLAG_QUEUED    0x0002  /* Buffer is queued for processing */
    #define V4L2_BUF_FLAG_DONE      0x0004  /* Buffer is ready */
    #define V4L2_BUF_FLAG_KEYFRAME  0x0008  /* Image is a keyframe (I-frame) */
    #define V4L2_BUF_FLAG_PFRAME    0x0010  /* Image is a P-frame */
    #define V4L2_BUF_FLAG_BFRAME    0x0020  /* Image is a B-frame */
    #define V4L2_BUF_FLAG_TIMECODE  0x0100  /* timecode field is valid */
    #define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */

    /*
     *      O V E R L A Y   P R E V I E W
     */
    struct v4l2_framebuffer
    {
            __u32                   capability;
            __u32                   flags;
    /* FIXME: in theory we should pass something like PCI device + memory
     * region + offset instead of some physical address */
            void*                   base;
            struct v4l2_pix_format  fmt;
    };
    /*  Flags for the 'capability' field. Read only */
    #define V4L2_FBUF_CAP_EXTERNOVERLAY     0x0001
    #define V4L2_FBUF_CAP_CHROMAKEY         0x0002
    #define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
    #define V4L2_FBUF_CAP_BITMAP_CLIPPING   0x0008
    #define V4L2_FBUF_CAP_LOCAL_ALPHA       0x0010
    #define V4L2_FBUF_CAP_GLOBAL_ALPHA      0x0020
    #define V4L2_FBUF_CAP_LOCAL_INV_ALPHA   0x0040
    /*  Flags for the 'flags' field. */
    #define V4L2_FBUF_FLAG_PRIMARY          0x0001
    #define V4L2_FBUF_FLAG_OVERLAY          0x0002
    #define V4L2_FBUF_FLAG_CHROMAKEY        0x0004
    #define V4L2_FBUF_FLAG_LOCAL_ALPHA      0x0008
    #define V4L2_FBUF_FLAG_GLOBAL_ALPHA     0x0010
    #define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA  0x0020

    struct v4l2_clip
    {
            struct v4l2_rect        c;
            struct v4l2_clip        __user *next;
    };

    struct v4l2_window
    {
            struct v4l2_rect        w;
            enum v4l2_field         field;
            __u32                   chromakey;
            struct v4l2_clip        __user *clips;
            __u32                   clipcount;
            void                    __user *bitmap;
            __u8                    global_alpha;
    };

    /*
     *      C A P T U R E   P A R A M E T E R S
     */
    struct v4l2_captureparm
    {
            __u32              capability;    /*  Supported modes */
            __u32              capturemode;   /*  Current mode */
            struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
            __u32              extendedmode;  /*  Driver-specific extensions */
            __u32              readbuffers;   /*  # of buffers for read */
            __u32              reserved[4];
    };

    /*  Flags for 'capability' and 'capturemode' fields */
    #define V4L2_MODE_HIGHQUALITY   0x0001  /*  High quality imaging mode */
    #define V4L2_CAP_TIMEPERFRAME   0x1000  /*  timeperframe field is supported */

    struct v4l2_outputparm
    {
            __u32              capability;   /*  Supported modes */
            __u32              outputmode;   /*  Current mode */
            struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
            __u32              extendedmode; /*  Driver-specific extensions */
            __u32              writebuffers; /*  # of buffers for write */
            __u32              reserved[4];
    };

    /*
     *      I N P U T   I M A G E   C R O P P I N G
     */
    struct v4l2_cropcap {
            enum v4l2_buf_type      type;
            struct v4l2_rect        bounds;
            struct v4l2_rect        defrect;
            struct v4l2_fract       pixelaspect;
    };

    struct v4l2_crop {
            enum v4l2_buf_type      type;
            struct v4l2_rect        c;
    };

    /*
     *      A N A L O G   V I D E O   S T A N D A R D
     */

    typedef __u64 v4l2_std_id;

    /* one bit for each */
    #define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
    #define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
    #define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
    #define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
    #define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
    #define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
    #define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
    #define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)

    #define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
    #define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
    #define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
    #define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)

    #define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
    #define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
    #define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
    #define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)

    #define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
    #define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
    #define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
    #define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
    #define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
    #define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
    #define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
    #define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)

    /* ATSC/HDTV */
    #define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
    #define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)

    /* FIXME:
       Although std_id is 64 bits, there is an issue on PPC32 architecture that
       makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
       this value to 32 bits.
       As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
       it should work fine. However, if needed to add more than two standards,
       v4l2-common.c should be fixed.
     */

    /* some merged standards */
    #define V4L2_STD_MN     (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC)
    #define V4L2_STD_B      (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B)
    #define V4L2_STD_GH     (V4L2_STD_PAL_G|V4L2_STD_PAL_H|V4L2_STD_SECAM_G|V4L2_STD_SECAM_H)
    #define V4L2_STD_DK     (V4L2_STD_PAL_DK|V4L2_STD_SECAM_DK)

    /* some common needed stuff */
    #define V4L2_STD_PAL_BG         (V4L2_STD_PAL_B         |\
                                     V4L2_STD_PAL_B1        |\
                                     V4L2_STD_PAL_G)
    #define V4L2_STD_PAL_DK         (V4L2_STD_PAL_D         |\
                                     V4L2_STD_PAL_D1        |\
                                     V4L2_STD_PAL_K)
    #define V4L2_STD_PAL            (V4L2_STD_PAL_BG        |\
                                     V4L2_STD_PAL_DK        |\
                                     V4L2_STD_PAL_H         |\
                                     V4L2_STD_PAL_I)
    #define V4L2_STD_NTSC           (V4L2_STD_NTSC_M        |\
                                     V4L2_STD_NTSC_M_JP     |\
                                     V4L2_STD_NTSC_M_KR)
    #define V4L2_STD_SECAM_DK       (V4L2_STD_SECAM_D       |\
                                     V4L2_STD_SECAM_K       |\
                                     V4L2_STD_SECAM_K1)
    #define V4L2_STD_SECAM          (V4L2_STD_SECAM_B       |\
                                     V4L2_STD_SECAM_G       |\
                                     V4L2_STD_SECAM_H       |\
                                     V4L2_STD_SECAM_DK      |\
                                     V4L2_STD_SECAM_L       |\
                                     V4L2_STD_SECAM_LC)

    #define V4L2_STD_525_60         (V4L2_STD_PAL_M         |\
                                     V4L2_STD_PAL_60        |\
                                     V4L2_STD_NTSC          |\
                                     V4L2_STD_NTSC_443)
    #define V4L2_STD_625_50         (V4L2_STD_PAL           |\
                                     V4L2_STD_PAL_N         |\
                                     V4L2_STD_PAL_Nc        |\
                                     V4L2_STD_SECAM)
    #define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
                                     V4L2_STD_ATSC_16_VSB)

    #define V4L2_STD_UNKNOWN        0
    #define V4L2_STD_ALL            (V4L2_STD_525_60        |\
                                     V4L2_STD_625_50)

    struct v4l2_standard
    {
            __u32                index;
            v4l2_std_id          id;
            __u8                 name[24];
            struct v4l2_fract    frameperiod; /* Frames, not fields */
            __u32                framelines;
            __u32                reserved[4];
    };

    /*
     *      V I D E O   I N P U T S
     */
    struct v4l2_input
    {
            __u32        index;             /*  Which input */
            __u8         name[32];          /*  Label */
            __u32        type;              /*  Type of input */
            __u32        audioset;          /*  Associated audios (bitfield) */
            __u32        tuner;             /*  Associated tuner */
            v4l2_std_id  std;
            __u32        status;
            __u32        reserved[4];
    };

    /*  Values for the 'type' field */
    #define V4L2_INPUT_TYPE_TUNER           1
    #define V4L2_INPUT_TYPE_CAMERA          2

    /* field 'status' - general */
    #define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
    #define V4L2_IN_ST_NO_SIGNAL   0x00000002
    #define V4L2_IN_ST_NO_COLOR    0x00000004

    /* field 'status' - analog */
    #define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
    #define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */

    /* field 'status' - digital */
    #define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
    #define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
    #define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */

    /* field 'status' - VCR and set-top box */
    #define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
    #define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
    #define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */

    /*
     *      V I D E O   O U T P U T S
     */
    struct v4l2_output
    {
            __u32        index;             /*  Which output */
            __u8         name[32];          /*  Label */
            __u32        type;              /*  Type of output */
            __u32        audioset;          /*  Associated audios (bitfield) */
            __u32        modulator;         /*  Associated modulator */
            v4l2_std_id  std;
            __u32        reserved[4];
    };
    /*  Values for the 'type' field */
    #define V4L2_OUTPUT_TYPE_MODULATOR              1
    #define V4L2_OUTPUT_TYPE_ANALOG                 2
    #define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY       3

    /*
     *      C O N T R O L S
     */
    struct v4l2_control
    {
            __u32                id;
            __s32                value;
    };

    struct v4l2_ext_control
    {
            __u32 id;
            __u32 reserved2[2];
            union {
                    __s32 value;
                    __s64 value64;
                    void *reserved;
            };
    } __attribute__ ((packed));

    struct v4l2_ext_controls
    {
            __u32 ctrl_class;
            __u32 count;
            __u32 error_idx;
            __u32 reserved[2];
            struct v4l2_ext_control *controls;
    };

    /*  Values for ctrl_class field */
    #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */
    #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */
    #define V4L2_CTRL_CLASS_CAMERA 0x009a0000       /* Camera class controls */

    #define V4L2_CTRL_ID_MASK         (0x0fffffff)
    #define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
    #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)

    /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
    struct v4l2_queryctrl
    {
            __u32                id;
            enum v4l2_ctrl_type  type;
            __u8                 name[32];  /* Whatever */
            __s32                minimum;   /* Note signedness */
            __s32                maximum;
            __s32                step;
            __s32                default_value;
            __u32                flags;
            __u32                reserved[2];
    };

    /*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
    struct v4l2_querymenu
    {
            __u32           id;
            __u32           index;
            __u8            name[32];       /* Whatever */
            __u32           reserved;
    };

    /*  Control flags  */
    #define V4L2_CTRL_FLAG_DISABLED         0x0001
    #define V4L2_CTRL_FLAG_GRABBED          0x0002
    #define V4L2_CTRL_FLAG_READ_ONLY        0x0004
    #define V4L2_CTRL_FLAG_UPDATE           0x0008
    #define V4L2_CTRL_FLAG_INACTIVE         0x0010
    #define V4L2_CTRL_FLAG_SLIDER           0x0020

    /*  Query flag, to be ORed with the control ID */
    #define V4L2_CTRL_FLAG_NEXT_CTRL        0x80000000

    /*  User-class control IDs defined by V4L2 */
    #define V4L2_CID_BASE                   (V4L2_CTRL_CLASS_USER | 0x900)
    #define V4L2_CID_USER_BASE              V4L2_CID_BASE
    /*  IDs reserved for driver specific controls */
    #define V4L2_CID_PRIVATE_BASE           0x08000000

    #define V4L2_CID_USER_CLASS             (V4L2_CTRL_CLASS_USER | 1)
    #define V4L2_CID_BRIGHTNESS             (V4L2_CID_BASE+0)
    #define V4L2_CID_CONTRAST               (V4L2_CID_BASE+1)
    #define V4L2_CID_SATURATION             (V4L2_CID_BASE+2)
    #define V4L2_CID_HUE                    (V4L2_CID_BASE+3)
    #define V4L2_CID_AUDIO_VOLUME           (V4L2_CID_BASE+5)
    #define V4L2_CID_AUDIO_BALANCE          (V4L2_CID_BASE+6)
    #define V4L2_CID_AUDIO_BASS             (V4L2_CID_BASE+7)
    #define V4L2_CID_AUDIO_TREBLE           (V4L2_CID_BASE+8)
    #define V4L2_CID_AUDIO_MUTE             (V4L2_CID_BASE+9)
    #define V4L2_CID_AUDIO_LOUDNESS         (V4L2_CID_BASE+10)
    #define V4L2_CID_BLACK_LEVEL            (V4L2_CID_BASE+11) /* Deprecated */
    #define V4L2_CID_AUTO_WHITE_BALANCE     (V4L2_CID_BASE+12)
    #define V4L2_CID_DO_WHITE_BALANCE       (V4L2_CID_BASE+13)
    #define V4L2_CID_RED_BALANCE            (V4L2_CID_BASE+14)
    #define V4L2_CID_BLUE_BALANCE           (V4L2_CID_BASE+15)
    #define V4L2_CID_GAMMA                  (V4L2_CID_BASE+16)
    #define V4L2_CID_WHITENESS              (V4L2_CID_GAMMA) /* Deprecated */
    #define V4L2_CID_EXPOSURE               (V4L2_CID_BASE+17)
    #define V4L2_CID_AUTOGAIN               (V4L2_CID_BASE+18)
    #define V4L2_CID_GAIN                   (V4L2_CID_BASE+19)
    #define V4L2_CID_HFLIP                  (V4L2_CID_BASE+20)
    #define V4L2_CID_VFLIP                  (V4L2_CID_BASE+21)

    /* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
    #define V4L2_CID_HCENTER_DEPRECATED     (V4L2_CID_BASE+22)
    #define V4L2_CID_VCENTER_DEPRECATED     (V4L2_CID_BASE+23)

    #define V4L2_CID_POWER_LINE_FREQUENCY   (V4L2_CID_BASE+24)
    enum v4l2_power_line_frequency {
            V4L2_CID_POWER_LINE_FREQUENCY_DISABLED  = 0,
            V4L2_CID_POWER_LINE_FREQUENCY_50HZ      = 1,
            V4L2_CID_POWER_LINE_FREQUENCY_60HZ      = 2,
    };
    #define V4L2_CID_HUE_AUTO                       (V4L2_CID_BASE+25)
    #define V4L2_CID_WHITE_BALANCE_TEMPERATURE      (V4L2_CID_BASE+26)
    #define V4L2_CID_SHARPNESS                      (V4L2_CID_BASE+27)
    #define V4L2_CID_BACKLIGHT_COMPENSATION         (V4L2_CID_BASE+28)
    #define V4L2_CID_LASTP1                         (V4L2_CID_BASE+29) /* last CID + 1 */

    /*  MPEG-class control IDs defined by V4L2 */
    #define V4L2_CID_MPEG_BASE                      (V4L2_CTRL_CLASS_MPEG | 0x900)
    #define V4L2_CID_MPEG_CLASS                     (V4L2_CTRL_CLASS_MPEG | 1)

    /*  MPEG streams */
    #define V4L2_CID_MPEG_STREAM_TYPE               (V4L2_CID_MPEG_BASE+0)
    enum v4l2_mpeg_stream_type {
            V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
            V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
            V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
            V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
            V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
            V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
    };
    #define V4L2_CID_MPEG_STREAM_PID_PMT            (V4L2_CID_MPEG_BASE+1)
    #define V4L2_CID_MPEG_STREAM_PID_AUDIO          (V4L2_CID_MPEG_BASE+2)
    #define V4L2_CID_MPEG_STREAM_PID_VIDEO          (V4L2_CID_MPEG_BASE+3)
    #define V4L2_CID_MPEG_STREAM_PID_PCR            (V4L2_CID_MPEG_BASE+4)
    #define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO       (V4L2_CID_MPEG_BASE+5)
    #define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO       (V4L2_CID_MPEG_BASE+6)
    #define V4L2_CID_MPEG_STREAM_VBI_FMT            (V4L2_CID_MPEG_BASE+7)
    enum v4l2_mpeg_stream_vbi_fmt {
            V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
            V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
    };

    /*  MPEG audio */
    #define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ       (V4L2_CID_MPEG_BASE+100)
    enum v4l2_mpeg_audio_sampling_freq {
            V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
            V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
            V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
    };
    #define V4L2_CID_MPEG_AUDIO_ENCODING            (V4L2_CID_MPEG_BASE+101)
    enum v4l2_mpeg_audio_encoding {
            V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
            V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
            V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
    };
    #define V4L2_CID_MPEG_AUDIO_L1_BITRATE          (V4L2_CID_MPEG_BASE+102)
    enum v4l2_mpeg_audio_l1_bitrate {
            V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
            V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
            V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
            V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
            V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
            V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
            V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
            V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
            V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
            V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
            V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
            V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
            V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
            V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
    };
    #define V4L2_CID_MPEG_AUDIO_L2_BITRATE          (V4L2_CID_MPEG_BASE+103)
    enum v4l2_mpeg_audio_l2_bitrate {
            V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
            V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
            V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
            V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
            V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
            V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
            V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
            V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
            V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
            V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
            V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
            V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
            V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
            V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
    };
    #define V4L2_CID_MPEG_AUDIO_L3_BITRATE          (V4L2_CID_MPEG_BASE+104)
    enum v4l2_mpeg_audio_l3_bitrate {
            V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
            V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
            V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
            V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
            V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
            V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
            V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
            V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
            V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
            V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
            V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
            V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
            V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
            V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
    };
    #define V4L2_CID_MPEG_AUDIO_MODE                (V4L2_CID_MPEG_BASE+105)
    enum v4l2_mpeg_audio_mode {
            V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
            V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
            V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
            V4L2_MPEG_AUDIO_MODE_MONO         = 3,
    };
    #define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION      (V4L2_CID_MPEG_BASE+106)
    enum  v4l2_mpeg_audio_mode_extension {
            V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
            V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
            V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
            V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
    };
    #define V4L2_CID_MPEG_AUDIO_EMPHASIS            (V4L2_CID_MPEG_BASE+107)
    enum v4l2_mpeg_audio_emphasis {
            V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
            V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
            V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
    };
    #define V4L2_CID_MPEG_AUDIO_CRC                 (V4L2_CID_MPEG_BASE+108)
    enum v4l2_mpeg_audio_crc {
            V4L2_MPEG_AUDIO_CRC_NONE  = 0,
            V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
    };
    #define V4L2_CID_MPEG_AUDIO_MUTE                (V4L2_CID_MPEG_BASE+109)

    /*  MPEG video */
    #define V4L2_CID_MPEG_VIDEO_ENCODING            (V4L2_CID_MPEG_BASE+200)
    enum v4l2_mpeg_video_encoding {
            V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0,
            V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1,
    };
    #define V4L2_CID_MPEG_VIDEO_ASPECT              (V4L2_CID_MPEG_BASE+201)
    enum v4l2_mpeg_video_aspect {
            V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
            V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
            V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
            V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
    };
    #define V4L2_CID_MPEG_VIDEO_B_FRAMES            (V4L2_CID_MPEG_BASE+202)
    #define V4L2_CID_MPEG_VIDEO_GOP_SIZE            (V4L2_CID_MPEG_BASE+203)
    #define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE         (V4L2_CID_MPEG_BASE+204)
    #define V4L2_CID_MPEG_VIDEO_PULLDOWN            (V4L2_CID_MPEG_BASE+205)
    #define V4L2_CID_MPEG_VIDEO_BITRATE_MODE        (V4L2_CID_MPEG_BASE+206)
    enum v4l2_mpeg_video_bitrate_mode {
            V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
            V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
    };
    #define V4L2_CID_MPEG_VIDEO_BITRATE             (V4L2_CID_MPEG_BASE+207)
    #define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK        (V4L2_CID_MPEG_BASE+208)
    #define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
    #define V4L2_CID_MPEG_VIDEO_MUTE                (V4L2_CID_MPEG_BASE+210)
    #define V4L2_CID_MPEG_VIDEO_MUTE_YUV            (V4L2_CID_MPEG_BASE+211)

    /*  MPEG-class control IDs specific to the CX2584x driver as defined by V4L2 */
    #define V4L2_CID_MPEG_CX2341X_BASE                              (V4L2_CTRL_CLASS_MPEG | 0x1000)
    #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE         (V4L2_CID_MPEG_CX2341X_BASE+0)
    enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
            V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
            V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
    };
    #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER              (V4L2_CID_MPEG_CX2341X_BASE+1)
    #define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE    (V4L2_CID_MPEG_CX2341X_BASE+2)
    enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
            V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
            V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
            V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
            V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
            V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
    };
    #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE  (V4L2_CID_MPEG_CX2341X_BASE+3)
    enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
            V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
            V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
    };
    #define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE        (V4L2_CID_MPEG_CX2341X_BASE+4)
    enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
            V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
            V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
    };
    #define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER             (V4L2_CID_MPEG_CX2341X_BASE+5)
    #define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE          (V4L2_CID_MPEG_CX2341X_BASE+6)
    enum v4l2_mpeg_cx2341x_video_median_filter_type {
            V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
            V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
            V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
            V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
            V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
    };
    #define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM   (V4L2_CID_MPEG_CX2341X_BASE+7)
    #define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP      (V4L2_CID_MPEG_CX2341X_BASE+8)
    #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+9)
    #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP    (V4L2_CID_MPEG_CX2341X_BASE+10)
    #define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS         (V4L2_CID_MPEG_CX2341X_BASE+11)

    /*  Camera class control IDs */
    #define V4L2_CID_CAMERA_CLASS_BASE      (V4L2_CTRL_CLASS_CAMERA | 0x900)
    #define V4L2_CID_CAMERA_CLASS           (V4L2_CTRL_CLASS_CAMERA | 1)

    #define V4L2_CID_EXPOSURE_AUTO                  (V4L2_CID_CAMERA_CLASS_BASE+1)
    enum v4l2_exposure_auto_type {
            V4L2_EXPOSURE_AUTO = 0,
            V4L2_EXPOSURE_MANUAL = 1,
            V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
            V4L2_EXPOSURE_APERTURE_PRIORITY = 3
    };
    #define V4L2_CID_EXPOSURE_ABSOLUTE              (V4L2_CID_CAMERA_CLASS_BASE+2)
    #define V4L2_CID_EXPOSURE_AUTO_PRIORITY         (V4L2_CID_CAMERA_CLASS_BASE+3)

    #define V4L2_CID_PAN_RELATIVE                   (V4L2_CID_CAMERA_CLASS_BASE+4)
    #define V4L2_CID_TILT_RELATIVE                  (V4L2_CID_CAMERA_CLASS_BASE+5)
    #define V4L2_CID_PAN_RESET                      (V4L2_CID_CAMERA_CLASS_BASE+6)
    #define V4L2_CID_TILT_RESET                     (V4L2_CID_CAMERA_CLASS_BASE+7)

    #define V4L2_CID_PAN_ABSOLUTE                   (V4L2_CID_CAMERA_CLASS_BASE+8)
    #define V4L2_CID_TILT_ABSOLUTE                  (V4L2_CID_CAMERA_CLASS_BASE+9)

    #define V4L2_CID_FOCUS_ABSOLUTE                 (V4L2_CID_CAMERA_CLASS_BASE+10)
    #define V4L2_CID_FOCUS_RELATIVE                 (V4L2_CID_CAMERA_CLASS_BASE+11)
    #define V4L2_CID_FOCUS_AUTO                     (V4L2_CID_CAMERA_CLASS_BASE+12)

    /*
     *      T U N I N G
     */
    struct v4l2_tuner
    {
            __u32                   index;
            __u8                    name[32];
            enum v4l2_tuner_type    type;
            __u32                   capability;
            __u32                   rangelow;
            __u32                   rangehigh;
            __u32                   rxsubchans;
            __u32                   audmode;
            __s32                   signal;
            __s32                   afc;
            __u32                   reserved[4];
    };

    struct v4l2_modulator
    {
            __u32                   index;
            __u8                    name[32];
            __u32                   capability;
            __u32                   rangelow;
            __u32                   rangehigh;
            __u32                   txsubchans;
            __u32                   reserved[4];
    };

    /*  Flags for the 'capability' field */
    #define V4L2_TUNER_CAP_LOW              0x0001
    #define V4L2_TUNER_CAP_NORM             0x0002
    #define V4L2_TUNER_CAP_STEREO           0x0010
    #define V4L2_TUNER_CAP_LANG2            0x0020
    #define V4L2_TUNER_CAP_SAP              0x0020
    #define V4L2_TUNER_CAP_LANG1            0x0040

    /*  Flags for the 'rxsubchans' field */
    #define V4L2_TUNER_SUB_MONO             0x0001
    #define V4L2_TUNER_SUB_STEREO           0x0002
    #define V4L2_TUNER_SUB_LANG2            0x0004
    #define V4L2_TUNER_SUB_SAP              0x0004
    #define V4L2_TUNER_SUB_LANG1            0x0008

    /*  Values for the 'audmode' field */
    #define V4L2_TUNER_MODE_MONO            0x0000
    #define V4L2_TUNER_MODE_STEREO          0x0001
    #define V4L2_TUNER_MODE_LANG2           0x0002
    #define V4L2_TUNER_MODE_SAP             0x0002
    #define V4L2_TUNER_MODE_LANG1           0x0003
    #define V4L2_TUNER_MODE_LANG1_LANG2     0x0004

    struct v4l2_frequency
    {
            __u32                 tuner;
            enum v4l2_tuner_type  type;
            __u32                 frequency;
            __u32                 reserved[8];
    };

    /*
     *      A U D I O
     */
    struct v4l2_audio
    {
            __u32   index;
            __u8    name[32];
            __u32   capability;
            __u32   mode;
            __u32   reserved[2];
    };

    /*  Flags for the 'capability' field */
    #define V4L2_AUDCAP_STEREO              0x00001
    #define V4L2_AUDCAP_AVL                 0x00002

    /*  Flags for the 'mode' field */
    #define V4L2_AUDMODE_AVL                0x00001

    struct v4l2_audioout
    {
            __u32   index;
            __u8    name[32];
            __u32   capability;
            __u32   mode;
            __u32   reserved[2];
    };

    /*
     *      M P E G   S E R V I C E S
     *
     *      NOTE: EXPERIMENTAL API
     */
    #if 1 /*KEEP*/
    #define V4L2_ENC_IDX_FRAME_I    (0)
    #define V4L2_ENC_IDX_FRAME_P    (1)
    #define V4L2_ENC_IDX_FRAME_B    (2)
    #define V4L2_ENC_IDX_FRAME_MASK (0xf)

    struct v4l2_enc_idx_entry {
            __u64 offset;
            __u64 pts;
            __u32 length;
            __u32 flags;
            __u32 reserved[2];
    };

    #define V4L2_ENC_IDX_ENTRIES (64)
    struct v4l2_enc_idx {
            __u32 entries;
            __u32 entries_cap;
            __u32 reserved[4];
            struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
    };

    #define V4L2_ENC_CMD_START      (0)
    #define V4L2_ENC_CMD_STOP       (1)
    #define V4L2_ENC_CMD_PAUSE      (2)
    #define V4L2_ENC_CMD_RESUME     (3)

    /* Flags for V4L2_ENC_CMD_STOP */
    #define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)

    struct v4l2_encoder_cmd {
            __u32 cmd;
            __u32 flags;
            union {
                    struct {
                            __u32 data[8];
                    } raw;
            };
    };

    #endif

    /*
     *      D A T A   S E R V I C E S   ( V B I )
     *
     *      Data services API by Michael Schimek
     */

    /* Raw VBI */
    struct v4l2_vbi_format
    {
            __u32   sampling_rate;          /* in 1 Hz */
            __u32   offset;
            __u32   samples_per_line;
            __u32   sample_format;          /* V4L2_PIX_FMT_* */
            __s32   start[2];
            __u32   count[2];
            __u32   flags;                  /* V4L2_VBI_* */
            __u32   reserved[2];            /* must be zero */
    };

    /*  VBI flags  */
    #define V4L2_VBI_UNSYNC         (1<< 0)
    #define V4L2_VBI_INTERLACED     (1<< 1)

    /* Sliced VBI
     *
     *    This implements is a proposal V4L2 API to allow SLICED VBI
     * required for some hardware encoders. It should change without
     * notice in the definitive implementation.
     */

    struct v4l2_sliced_vbi_format
    {
            __u16   service_set;
            /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
               service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
                                     (equals frame lines 313-336 for 625 line video
                                      standards, 263-286 for 525 line standards) */
            __u16   service_lines[2][24];
            __u32   io_size;
            __u32   reserved[2];            /* must be zero */
    };

    /* Teletext World System Teletext
       (WST), defined on ITU-R BT.653-2 */
    #define V4L2_SLICED_TELETEXT_B          (0x0001)
    /* Video Program System, defined on ETS 300 231*/
    #define V4L2_SLICED_VPS                 (0x0400)
    /* Closed Caption, defined on EIA-608 */
    #define V4L2_SLICED_CAPTION_525         (0x1000)
    /* Wide Screen System, defined on ITU-R BT1119.1 */
    #define V4L2_SLICED_WSS_625             (0x4000)

    #define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
    #define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)

    struct v4l2_sliced_vbi_cap
    {
            __u16   service_set;
            /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
               service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
                                     (equals frame lines 313-336 for 625 line video
                                      standards, 263-286 for 525 line standards) */
            __u16   service_lines[2][24];
            enum v4l2_buf_type type;
            __u32   reserved[3];    /* must be 0 */
    };

    struct v4l2_sliced_vbi_data
    {
            __u32   id;
            __u32   field;          /* 0: first field, 1: second field */
            __u32   line;           /* 1-23 */
            __u32   reserved;       /* must be 0 */
            __u8    data[48];
    };

    /*
     *      A G G R E G A T E   S T R U C T U R E S
     */

    /*      Stream data format
     */
    struct v4l2_format
    {
            enum v4l2_buf_type type;
            union
            {
                    struct v4l2_pix_format          pix;     // V4L2_BUF_TYPE_VIDEO_CAPTURE
                    struct v4l2_window              win;     // V4L2_BUF_TYPE_VIDEO_OVERLAY
                    struct v4l2_vbi_format          vbi;     // V4L2_BUF_TYPE_VBI_CAPTURE
                    struct v4l2_sliced_vbi_format   sliced;  // V4L2_BUF_TYPE_SLICED_VBI_CAPTURE
                    __u8    raw_data[200];                   // user-defined
            } fmt;
    };

    /*      Stream type-dependent parameters
     */
    struct v4l2_streamparm
    {
            enum v4l2_buf_type type;
            union
            {
                    struct v4l2_captureparm capture;
                    struct v4l2_outputparm  output;
                    __u8    raw_data[200];  /* user-defined */
            } parm;
    };

    /*
     *      A D V A N C E D   D E B U G G I N G
     *
     *      NOTE: EXPERIMENTAL API
     */

    /* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */

    #define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
    #define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver ID */
    #define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */

    struct v4l2_register {
            __u32 match_type; /* Match type */
            __u32 match_chip; /* Match this chip, meaning determined by match_type */
            __u64 reg;
            __u64 val;
    };

    /* VIDIOC_G_CHIP_IDENT */
    struct v4l2_chip_ident {
            __u32 match_type;  /* Match type */
            __u32 match_chip;  /* Match this chip, meaning determined by match_type */
            __u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
            __u32 revision;    /* chip revision, chip specific */
    };

    /*
     *      I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
     *
     */
    #define VIDIOC_QUERYCAP         _IOR  ('V',  0, struct v4l2_capability)
    #define VIDIOC_RESERVED         _IO   ('V',  1)
    #define VIDIOC_ENUM_FMT         _IOWR ('V',  2, struct v4l2_fmtdesc)
    #define VIDIOC_G_FMT            _IOWR ('V',  4, struct v4l2_format)
    #define VIDIOC_S_FMT            _IOWR ('V',  5, struct v4l2_format)
    #define VIDIOC_REQBUFS          _IOWR ('V',  8, struct v4l2_requestbuffers)
    #define VIDIOC_QUERYBUF         _IOWR ('V',  9, struct v4l2_buffer)
    #define VIDIOC_G_FBUF           _IOR  ('V', 10, struct v4l2_framebuffer)
    #define VIDIOC_S_FBUF           _IOW  ('V', 11, struct v4l2_framebuffer)
    #define VIDIOC_OVERLAY          _IOW  ('V', 14, int)
    #define VIDIOC_QBUF             _IOWR ('V', 15, struct v4l2_buffer)
    #define VIDIOC_DQBUF            _IOWR ('V', 17, struct v4l2_buffer)
    #define VIDIOC_STREAMON         _IOW  ('V', 18, int)
    #define VIDIOC_STREAMOFF        _IOW  ('V', 19, int)
    #define VIDIOC_G_PARM           _IOWR ('V', 21, struct v4l2_streamparm)
    #define VIDIOC_S_PARM           _IOWR ('V', 22, struct v4l2_streamparm)
    #define VIDIOC_G_STD            _IOR  ('V', 23, v4l2_std_id)
    #define VIDIOC_S_STD            _IOW  ('V', 24, v4l2_std_id)
    #define VIDIOC_ENUMSTD          _IOWR ('V', 25, struct v4l2_standard)
    #define VIDIOC_ENUMINPUT        _IOWR ('V', 26, struct v4l2_input)
    #define VIDIOC_G_CTRL           _IOWR ('V', 27, struct v4l2_control)
    #define VIDIOC_S_CTRL           _IOWR ('V', 28, struct v4l2_control)
    #define VIDIOC_G_TUNER          _IOWR ('V', 29, struct v4l2_tuner)
    #define VIDIOC_S_TUNER          _IOW  ('V', 30, struct v4l2_tuner)
    #define VIDIOC_G_AUDIO          _IOR  ('V', 33, struct v4l2_audio)
    #define VIDIOC_S_AUDIO          _IOW  ('V', 34, struct v4l2_audio)
    #define VIDIOC_QUERYCTRL        _IOWR ('V', 36, struct v4l2_queryctrl)
    #define VIDIOC_QUERYMENU        _IOWR ('V', 37, struct v4l2_querymenu)
    #define VIDIOC_G_INPUT          _IOR  ('V', 38, int)
    #define VIDIOC_S_INPUT          _IOWR ('V', 39, int)
    #define VIDIOC_G_OUTPUT         _IOR  ('V', 46, int)
    #define VIDIOC_S_OUTPUT         _IOWR ('V', 47, int)
    #define VIDIOC_ENUMOUTPUT       _IOWR ('V', 48, struct v4l2_output)
    #define VIDIOC_G_AUDOUT         _IOR  ('V', 49, struct v4l2_audioout)
    #define VIDIOC_S_AUDOUT         _IOW  ('V', 50, struct v4l2_audioout)
    #define VIDIOC_G_MODULATOR      _IOWR ('V', 54, struct v4l2_modulator)
    #define VIDIOC_S_MODULATOR      _IOW  ('V', 55, struct v4l2_modulator)
    #define VIDIOC_G_FREQUENCY      _IOWR ('V', 56, struct v4l2_frequency)
    #define VIDIOC_S_FREQUENCY      _IOW  ('V', 57, struct v4l2_frequency)
    #define VIDIOC_CROPCAP          _IOWR ('V', 58, struct v4l2_cropcap)
    #define VIDIOC_G_CROP           _IOWR ('V', 59, struct v4l2_crop)
    #define VIDIOC_S_CROP           _IOW  ('V', 60, struct v4l2_crop)
    #define VIDIOC_G_JPEGCOMP       _IOR  ('V', 61, struct v4l2_jpegcompression)
    #define VIDIOC_S_JPEGCOMP       _IOW  ('V', 62, struct v4l2_jpegcompression)
    #define VIDIOC_QUERYSTD         _IOR  ('V', 63, v4l2_std_id)
    #define VIDIOC_TRY_FMT          _IOWR ('V', 64, struct v4l2_format)
    #define VIDIOC_ENUMAUDIO        _IOWR ('V', 65, struct v4l2_audio)
    #define VIDIOC_ENUMAUDOUT       _IOWR ('V', 66, struct v4l2_audioout)
    #define VIDIOC_G_PRIORITY       _IOR  ('V', 67, enum v4l2_priority)
    #define VIDIOC_S_PRIORITY       _IOW  ('V', 68, enum v4l2_priority)
    #define VIDIOC_G_SLICED_VBI_CAP _IOWR ('V', 69, struct v4l2_sliced_vbi_cap)
    #define VIDIOC_LOG_STATUS       _IO   ('V', 70)
    #define VIDIOC_G_EXT_CTRLS      _IOWR ('V', 71, struct v4l2_ext_controls)
    #define VIDIOC_S_EXT_CTRLS      _IOWR ('V', 72, struct v4l2_ext_controls)
    #define VIDIOC_TRY_EXT_CTRLS    _IOWR ('V', 73, struct v4l2_ext_controls)
    #if 1 /*KEEP*/
    #define VIDIOC_ENUM_FRAMESIZES  _IOWR ('V', 74, struct v4l2_frmsizeenum)
    #define VIDIOC_ENUM_FRAMEINTERVALS      _IOWR ('V', 75, struct v4l2_frmivalenum)
    #define VIDIOC_G_ENC_INDEX      _IOR  ('V', 76, struct v4l2_enc_idx)
    #define VIDIOC_ENCODER_CMD      _IOWR ('V', 77, struct v4l2_encoder_cmd)
    #define VIDIOC_TRY_ENCODER_CMD  _IOWR ('V', 78, struct v4l2_encoder_cmd)

    /* Experimental, only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
    #define VIDIOC_DBG_S_REGISTER   _IOW  ('V', 79, struct v4l2_register)
    #define VIDIOC_DBG_G_REGISTER   _IOWR ('V', 80, struct v4l2_register)

    #define VIDIOC_G_CHIP_IDENT     _IOWR ('V', 81, struct v4l2_chip_ident)
    #endif

    #ifdef __OLD_VIDIOC_
    /* for compatibility, will go away some day */
    #define VIDIOC_OVERLAY_OLD      _IOWR ('V', 14, int)
    #define VIDIOC_S_PARM_OLD       _IOW  ('V', 22, struct v4l2_streamparm)
    #define VIDIOC_S_CTRL_OLD       _IOW  ('V', 28, struct v4l2_control)
    #define VIDIOC_G_AUDIO_OLD      _IOWR ('V', 33, struct v4l2_audio)
    #define VIDIOC_G_AUDOUT_OLD     _IOWR ('V', 49, struct v4l2_audioout)
    #define VIDIOC_CROPCAP_OLD      _IOR  ('V', 58, struct v4l2_cropcap)
    #endif

    #define BASE_VIDIOC_PRIVATE     192             /* 192-255 are private */

    #endif /* __LINUX_VIDEODEV2_H */

    /*
     * Local variables:
     * c-basic-offset: 8
     * End:
     */

# Appendix B. Video Capture Example

    /*
     *  V4L2 video capture example
     *
     *  This program can be used and distributed without restrictions.
     */

    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <assert.h>

    #include <getopt.h>             /* getopt_long() */

    #include <fcntl.h>              /* low-level i/o */
    #include <unistd.h>
    #include <errno.h>
    #include <malloc.h>
    #include <sys/stat.h>
    #include <sys/types.h>
    #include <sys/time.h>
    #include <sys/mman.h>
    #include <sys/ioctl.h>

    #include <asm/types.h>          /* for videodev2.h */

    #include <linux/videodev2.h>

    #define CLEAR(x) memset (&(x), 0, sizeof (x))

    typedef enum {
            IO_METHOD_READ,
            IO_METHOD_MMAP,
            IO_METHOD_USERPTR,
    } io_method;

    struct buffer {
            void *                  start;
            size_t                  length;
    };

    static char *           dev_name        = NULL;
    static io_method        io              = IO_METHOD_MMAP;
    static int              fd              = -1;
    struct buffer *         buffers         = NULL;
    static unsigned int     n_buffers       = 0;

    static void
    errno_exit                      (const char *           s)
    {
            fprintf (stderr, "%s error %d, %s\n",
                     s, errno, strerror (errno));

            exit (EXIT_FAILURE);
    }

    static int
    xioctl                          (int                    fd,
                                     int                    request,
                                     void *                 arg)
    {
            int r;

            do r = ioctl (fd, request, arg);
            while (-1 == r && EINTR == errno);

            return r;
    }

    static void
    process_image                   (const void *           p)
    {
            fputc ('.', stdout);
            fflush (stdout);
    }

    static int
    read_frame                      (void)
    {
            struct v4l2_buffer buf;
            unsigned int i;

            switch (io) {
            case IO_METHOD_READ:
                    if (-1 == read (fd, buffers[0].start, buffers[0].length)) {
                            switch (errno) {
                            case EAGAIN:
                                    return 0;

                            case EIO:
                                    /* Could ignore EIO, see spec. */

                                    /* fall through */

                            default:
                                    errno_exit ("read");
                            }
                    }

                    process_image (buffers[0].start);

                    break;

            case IO_METHOD_MMAP:
                    CLEAR (buf);

                    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
                    buf.memory = V4L2_MEMORY_MMAP;

                    if (-1 == xioctl (fd, VIDIOC_DQBUF, &buf)) {
                            switch (errno) {
                            case EAGAIN:
                                    return 0;

                            case EIO:
                                    /* Could ignore EIO, see spec. */

                                    /* fall through */

                            default:
                                    errno_exit ("VIDIOC_DQBUF");
                            }
                    }

                    assert (buf.index < n_buffers);

                    process_image (buffers[buf.index].start);

                    if (-1 == xioctl (fd, VIDIOC_QBUF, &buf))
                            errno_exit ("VIDIOC_QBUF");

                    break;

            case IO_METHOD_USERPTR:
                    CLEAR (buf);

                    buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
                    buf.memory = V4L2_MEMORY_USERPTR;

                    if (-1 == xioctl (fd, VIDIOC_DQBUF, &buf)) {
                            switch (errno) {
                            case EAGAIN:
                                    return 0;

                            case EIO:
                                    /* Could ignore EIO, see spec. */

                                    /* fall through */

                            default:
                                    errno_exit ("VIDIOC_DQBUF");
                            }
                    }

                    for (i = 0; i < n_buffers; ++i)
                            if (buf.m.userptr == (unsigned long) buffers[i].start
                                && buf.length == buffers[i].length)
                                    break;

                    assert (i < n_buffers);

                    process_image ((void *) buf.m.userptr);

                    if (-1 == xioctl (fd, VIDIOC_QBUF, &buf))
                            errno_exit ("VIDIOC_QBUF");

                    break;
            }

            return 1;
    }

    static void
    mainloop                        (void)
    {
            unsigned int count;

            count = 100;

            while (count-- > 0) {
                    for (;;) {
                            fd_set fds;
                            struct timeval tv;
                            int r;

                            FD_ZERO (&fds);
                            FD_SET (fd, &fds);

                            /* Timeout. */
                            tv.tv_sec = 2;
                            tv.tv_usec = 0;

                            r = select (fd + 1, &fds, NULL, NULL, &tv);

                            if (-1 == r) {
                                    if (EINTR == errno)
                                            continue;

                                    errno_exit ("select");
                            }

                            if (0 == r) {
                                    fprintf (stderr, "select timeout\n");
                                    exit (EXIT_FAILURE);
                            }

                            if (read_frame ())
                                    break;

                            /* EAGAIN - continue select loop. */
                    }
            }
    }

    static void
    stop_capturing                  (void)
    {
            enum v4l2_buf_type type;

            switch (io) {
            case IO_METHOD_READ:
                    /* Nothing to do. */
                    break;

            case IO_METHOD_MMAP:
            case IO_METHOD_USERPTR:
                    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

                    if (-1 == xioctl (fd, VIDIOC_STREAMOFF, &type))
                            errno_exit ("VIDIOC_STREAMOFF");

                    break;
            }
    }

    static void
    start_capturing                 (void)
    {
            unsigned int i;
            enum v4l2_buf_type type;

            switch (io) {
            case IO_METHOD_READ:
                    /* Nothing to do. */
                    break;

            case IO_METHOD_MMAP:
                    for (i = 0; i < n_buffers; ++i) {
                            struct v4l2_buffer buf;

                            CLEAR (buf);

                            buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
                            buf.memory      = V4L2_MEMORY_MMAP;
                            buf.index       = i;

                            if (-1 == xioctl (fd, VIDIOC_QBUF, &buf))
                                    errno_exit ("VIDIOC_QBUF");
                    }

                    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

                    if (-1 == xioctl (fd, VIDIOC_STREAMON, &type))
                            errno_exit ("VIDIOC_STREAMON");

                    break;

            case IO_METHOD_USERPTR:
                    for (i = 0; i < n_buffers; ++i) {
                            struct v4l2_buffer buf;

                            CLEAR (buf);

                            buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
                            buf.memory      = V4L2_MEMORY_USERPTR;
                            buf.index       = i;
                            buf.m.userptr   = (unsigned long) buffers[i].start;
                            buf.length      = buffers[i].length;

                            if (-1 == xioctl (fd, VIDIOC_QBUF, &buf))
                                    errno_exit ("VIDIOC_QBUF");
                    }

                    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

                    if (-1 == xioctl (fd, VIDIOC_STREAMON, &type))
                            errno_exit ("VIDIOC_STREAMON");

                    break;
            }
    }

    static void
    uninit_device                   (void)
    {
            unsigned int i;

            switch (io) {
            case IO_METHOD_READ:
                    free (buffers[0].start);
                    break;

            case IO_METHOD_MMAP:
                    for (i = 0; i < n_buffers; ++i)
                            if (-1 == munmap (buffers[i].start, buffers[i].length))
                                    errno_exit ("munmap");
                    break;

            case IO_METHOD_USERPTR:
                    for (i = 0; i < n_buffers; ++i)
                            free (buffers[i].start);
                    break;
            }

            free (buffers);
    }

    static void
    init_read                       (unsigned int           buffer_size)
    {
            buffers = calloc (1, sizeof (*buffers));

            if (!buffers) {
                    fprintf (stderr, "Out of memory\n");
                    exit (EXIT_FAILURE);
            }

            buffers[0].length = buffer_size;
            buffers[0].start = malloc (buffer_size);

            if (!buffers[0].start) {
                    fprintf (stderr, "Out of memory\n");
                    exit (EXIT_FAILURE);
            }
    }

    static void
    init_mmap                       (void)
    {
            struct v4l2_requestbuffers req;

            CLEAR (req);

            req.count               = 4;
            req.type                = V4L2_BUF_TYPE_VIDEO_CAPTURE;
            req.memory              = V4L2_MEMORY_MMAP;

            if (-1 == xioctl (fd, VIDIOC_REQBUFS, &req)) {
                    if (EINVAL == errno) {
                            fprintf (stderr, "%s does not support "
                                     "memory mapping\n", dev_name);
                            exit (EXIT_FAILURE);
                    } else {
                            errno_exit ("VIDIOC_REQBUFS");
                    }
            }

            if (req.count < 2) {
                    fprintf (stderr, "Insufficient buffer memory on %s\n",
                             dev_name);
                    exit (EXIT_FAILURE);
            }

            buffers = calloc (req.count, sizeof (*buffers));

            if (!buffers) {
                    fprintf (stderr, "Out of memory\n");
                    exit (EXIT_FAILURE);
            }

            for (n_buffers = 0; n_buffers < req.count; ++n_buffers) {
                    struct v4l2_buffer buf;

                    CLEAR (buf);

                    buf.type        = V4L2_BUF_TYPE_VIDEO_CAPTURE;
                    buf.memory      = V4L2_MEMORY_MMAP;
                    buf.index       = n_buffers;

                    if (-1 == xioctl (fd, VIDIOC_QUERYBUF, &buf))
                            errno_exit ("VIDIOC_QUERYBUF");

                    buffers[n_buffers].length = buf.length;
                    buffers[n_buffers].start =
                            mmap (NULL /* start anywhere */,
                                  buf.length,
                                  PROT_READ | PROT_WRITE /* required */,
                                  MAP_SHARED /* recommended */,
                                  fd, buf.m.offset);

                    if (MAP_FAILED == buffers[n_buffers].start)
                            errno_exit ("mmap");
            }
    }

    static void
    init_userp                      (unsigned int           buffer_size)
    {
            struct v4l2_requestbuffers req;
            unsigned int page_size;

            page_size = getpagesize ();
            buffer_size = (buffer_size + page_size - 1) & ~(page_size - 1);

            CLEAR (req);

            req.count               = 4;
            req.type                = V4L2_BUF_TYPE_VIDEO_CAPTURE;
            req.memory              = V4L2_MEMORY_USERPTR;

            if (-1 == xioctl (fd, VIDIOC_REQBUFS, &req)) {
                    if (EINVAL == errno) {
                            fprintf (stderr, "%s does not support "
                                     "user pointer i/o\n", dev_name);
                            exit (EXIT_FAILURE);
                    } else {
                            errno_exit ("VIDIOC_REQBUFS");
                    }
            }

            buffers = calloc (4, sizeof (*buffers));

            if (!buffers) {
                    fprintf (stderr, "Out of memory\n");
                    exit (EXIT_FAILURE);
            }

            for (n_buffers = 0; n_buffers < 4; ++n_buffers) {
                    buffers[n_buffers].length = buffer_size;
                    buffers[n_buffers].start = memalign (/* boundary */ page_size,
                                                         buffer_size);

                    if (!buffers[n_buffers].start) {
                            fprintf (stderr, "Out of memory\n");
                            exit (EXIT_FAILURE);
                    }
            }
    }

    static void
    init_device                     (void)
    {
            struct v4l2_capability cap;
            struct v4l2_cropcap cropcap;
            struct v4l2_crop crop;
            struct v4l2_format fmt;
            unsigned int min;

            if (-1 == xioctl (fd, VIDIOC_QUERYCAP, &cap)) {
                    if (EINVAL == errno) {
                            fprintf (stderr, "%s is no V4L2 device\n",
                                     dev_name);
                            exit (EXIT_FAILURE);
                    } else {
                            errno_exit ("VIDIOC_QUERYCAP");
                    }
            }

            if (!(cap.capabilities & V4L2_CAP_VIDEO_CAPTURE)) {
                    fprintf (stderr, "%s is no video capture device\n",
                             dev_name);
                    exit (EXIT_FAILURE);
            }

            switch (io) {
            case IO_METHOD_READ:
                    if (!(cap.capabilities & V4L2_CAP_READWRITE)) {
                            fprintf (stderr, "%s does not support read i/o\n",
                                     dev_name);
                            exit (EXIT_FAILURE);
                    }

                    break;

            case IO_METHOD_MMAP:
            case IO_METHOD_USERPTR:
                    if (!(cap.capabilities & V4L2_CAP_STREAMING)) {
                            fprintf (stderr, "%s does not support streaming i/o\n",
                                     dev_name);
                            exit (EXIT_FAILURE);
                    }

                    break;
            }

            /* Select video input, video standard and tune here. */

            CLEAR (cropcap);

            cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

            if (0 == xioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
                    crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
                    crop.c = cropcap.defrect; /* reset to default */

                    if (-1 == xioctl (fd, VIDIOC_S_CROP, &crop)) {
                            switch (errno) {
                            case EINVAL:
                                    /* Cropping not supported. */
                                    break;
                            default:
                                    /* Errors ignored. */
                                    break;
                            }
                    }
            } else {
                    /* Errors ignored. */
            }

            CLEAR (fmt);

            fmt.type                = V4L2_BUF_TYPE_VIDEO_CAPTURE;
            fmt.fmt.pix.width       = 640;
            fmt.fmt.pix.height      = 480;
            fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
            fmt.fmt.pix.field       = V4L2_FIELD_INTERLACED;

            if (-1 == xioctl (fd, VIDIOC_S_FMT, &fmt))
                    errno_exit ("VIDIOC_S_FMT");

            /* Note VIDIOC_S_FMT may change width and height. */

            /* Buggy driver paranoia. */
            min = fmt.fmt.pix.width * 2;
            if (fmt.fmt.pix.bytesperline < min)
                    fmt.fmt.pix.bytesperline = min;
            min = fmt.fmt.pix.bytesperline * fmt.fmt.pix.height;
            if (fmt.fmt.pix.sizeimage < min)
                    fmt.fmt.pix.sizeimage = min;

            switch (io) {
            case IO_METHOD_READ:
                    init_read (fmt.fmt.pix.sizeimage);
                    break;

            case IO_METHOD_MMAP:
                    init_mmap ();
                    break;

            case IO_METHOD_USERPTR:
                    init_userp (fmt.fmt.pix.sizeimage);
                    break;
            }
    }

    static void
    close_device                    (void)
    {
            if (-1 == close (fd))
                    errno_exit ("close");

            fd = -1;
    }

    static void
    open_device                     (void)
    {
            struct stat st;

            if (-1 == stat (dev_name, &st)) {
                    fprintf (stderr, "Cannot identify '%s': %d, %s\n",
                             dev_name, errno, strerror (errno));
                    exit (EXIT_FAILURE);
            }

            if (!S_ISCHR (st.st_mode)) {
                    fprintf (stderr, "%s is no device\n", dev_name);
                    exit (EXIT_FAILURE);
            }

            fd = open (dev_name, O_RDWR /* required */ | O_NONBLOCK, 0);

            if (-1 == fd) {
                    fprintf (stderr, "Cannot open '%s': %d, %s\n",
                             dev_name, errno, strerror (errno));
                    exit (EXIT_FAILURE);
            }
    }

    static void
    usage                           (FILE *                 fp,
                                     int                    argc,
                                     char **                argv)
    {
            fprintf (fp,
                     "Usage: %s [options]\n\n"
                     "Options:\n"
                     "-d | --device name   Video device name [/dev/video]\n"
                     "-h | --help          Print this message\n"
                     "-m | --mmap          Use memory mapped buffers\n"
                     "-r | --read          Use read() calls\n"
                     "-u | --userp         Use application allocated buffers\n"
                     "",
                     argv[0]);
    }

    static const char short_options [] = "d:hmru";

    static const struct option
    long_options [] = {
            { "device",     required_argument,      NULL,           'd' },
            { "help",       no_argument,            NULL,           'h' },
            { "mmap",       no_argument,            NULL,           'm' },
            { "read",       no_argument,            NULL,           'r' },
            { "userp",      no_argument,            NULL,           'u' },
            { 0, 0, 0, 0 }
    };

    int
    main                            (int                    argc,
                                     char **                argv)
    {
            dev_name = "/dev/video";

            for (;;) {
                    int index;
                    int c;

                    c = getopt_long (argc, argv,
                                     short_options, long_options,
                                     &index);

                    if (-1 == c)
                            break;

                    switch (c) {
                    case 0: /* getopt_long() flag */
                            break;

                    case 'd':
                            dev_name = optarg;
                            break;

                    case 'h':
                            usage (stdout, argc, argv);
                            exit (EXIT_SUCCESS);

                    case 'm':
                            io = IO_METHOD_MMAP;
                            break;

                    case 'r':
                            io = IO_METHOD_READ;
                            break;

                    case 'u':
                            io = IO_METHOD_USERPTR;
                            break;

                    default:
                            usage (stderr, argc, argv);
                            exit (EXIT_FAILURE);
                    }
            }

            open_device ();

            init_device ();

            start_capturing ();

            mainloop ();

            stop_capturing ();

            uninit_device ();

            close_device ();

            exit (EXIT_SUCCESS);

            return 0;
    }

# Appendix C. GNU Free Documentation License

## C.1. 0. PREAMBLE

The purpose of this License is to make a manual, textbook, or other written document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.

This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.

We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.

## C.2. 1. APPLICABILITY AND DEFINITIONS

This License applies to any manual or other work that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you".

A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.

A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (For example, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.

The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License.

The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License.

A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, whose contents can be viewed and edited directly and straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup has been designed to thwart or discourage subsequent modification by readers is not Transparent. A copy that is not "Transparent" is called "Opaque".

Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML designed for human modification. Opaque formats include PostScript, PDF, proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML produced by some word processors for output purposes only.

The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text.

## C.3. 2. VERBATIM COPYING

You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.

You may also lend copies, under the same conditions stated above, and you may publicly display copies.

## C.4. 3. COPYING IN QUANTITY

If you publish printed copies of the Document numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.

If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.

If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a publicly-accessible computer-network location containing a complete Transparent copy of the Document, free of added material, which the general network-using public has access to download anonymously at no charge using public-standard network protocols. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.

It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.

## C.5. 4. MODIFICATIONS

You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:

- A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.

- B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has less than five).

- C. State on the Title Page the name of the publisher of the Modified Version, as the publisher.

- D. Preserve all the copyright notices of the Document.

- E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.

- F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.

- G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice.

- H. Include an unaltered copy of this License.

- I. Preserve the section entitled "History", and its title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.

- J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.

- K. In any section entitled "Acknowledgements" or "Dedications", preserve the section's title, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.

- L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.

- M. Delete any section entitled "Endorsements". Such a section may not be included in the Modified Version.

- N. Do not retitle any existing section as "Endorsements" or to conflict in title with any Invariant Section.

If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles.

You may add a section entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.

You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.

The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version .

## C.6. 5. COMBINING DOCUMENTS

You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice.

The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.

In the combination, you must combine any sections entitled "History" in the various original documents, forming one section entitled "History"; likewise combine any sections entitled "Acknowledgements", and any sections entitled "Dedications". You must delete all sections entitled "Endorsements."

## C.7. 6. COLLECTIONS OF DOCUMENTS

You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.

You may extract a single document from such a collection, and dispbibute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.

## C.8. 7. AGGREGATION WITH INDEPENDENT WORKS

A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, does not as a whole count as a Modified Version of the Document, provided no compilation copyright is claimed for the compilation. Such a compilation is called an "aggregate", and this License does not apply to the other self-contained works thus compiled with the Document , on account of their being thus compiled, if they are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one quarter of the entire aggregate, the Document's Cover Texts may be placed on covers that surround only the Document within the aggregate. Otherwise they must appear on covers around the whole aggregate.

## C.9. 8. TRANSLATION

Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License provided that you also include the original English version of this License. In case of a disagreement between the translation and the original English version of this License, the original English version will prevail.

## C.10. 9. TERMINATION

You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

## C.11. 10. FUTURE REVISIONS OF THIS LICENSE

The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.

Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation.

## C.12. Addendum

To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:

> Copyright © YEAR YOUR NAME.

> Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. A copy of the license is included in the section entitled "GNU Free Documentation License".

If you have no Invariant Sections, write "with no Invariant Sections" instead of saying which ones are invariant. If you have no Front-Cover Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being LIST"; likewise for Back-Cover Texts.

If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.

# List of Types

v4l2_std_id
enum v4l2_buf_type
enum v4l2_colorspace
enum v4l2_ctrl_type
enum v4l2_field
enum v4l2_frmivaltypes
enum v4l2_frmsizetypes
enum v4l2_memory
enum v4l2_priority
enum v4l2_tuner_type
struct v4l2_audio
struct v4l2_audioout
struct v4l2_buffer
struct v4l2_capability
struct v4l2_captureparm
struct v4l2_chip_ident
struct v4l2_clip
struct v4l2_control
struct v4l2_crop
struct v4l2_cropcap
struct v4l2_enc_idx
struct v4l2_enc_idx_entry
struct v4l2_encoder_cmd
struct v4l2_ext_control
struct v4l2_ext_controls
struct v4l2_fmtdesc
struct v4l2_format
struct v4l2_fract
struct v4l2_framebuffer
struct v4l2_frequency
struct v4l2_frmival_stepwise
struct v4l2_frmivalenum
struct v4l2_frmsize_discrete
struct v4l2_frmsize_stepwise
struct v4l2_frmsizeenum
struct v4l2_input
struct v4l2_jpegcompression
struct v4l2_modulator
struct v4l2_output
struct v4l2_outputparm
struct v4l2_pix_format
struct v4l2_queryctrl
struct v4l2_querymenu
struct v4l2_rect
struct v4l2_register
struct v4l2_requestbuffers
struct v4l2_sliced_vbi_cap
struct v4l2_sliced_vbi_data
struct v4l2_sliced_vbi_format
struct v4l2_standard
struct v4l2_streamparm
struct v4l2_timecode
struct v4l2_tuner
struct v4l2_vbi_format
struct v4l2_window

# References

[EIA 608-B] Electronic Industries Alliance (http://www.eia.org), EIA 608-B "Recommended Practice for Line 21 Data Service".

[EN 300 294] European Telecommunication Standards Institute (http://www.etsi.org), EN 300 294 "625-line television Wide Screen Signalling (WSS)".

[ETS 300 231] European Telecommunication Standards Institute (http://www.etsi.org), ETS 300 231 "Specification of the domestic video Programme Delivery Control system (PDC)".

[ETS 300 706] European Telecommunication Standards Institute (http://www.etsi.org), ETS 300 706 "Enhanced Teletext specification".

[ISO 13818-1] International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch), ITU-T Rec. H.222.0 | ISO/IEC 13818-1 "Information technology — Generic coding of moving pictures and associated audio information: Systems".

[ISO 13818-2] International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch), ITU-T Rec. H.262 | ISO/IEC 13818-2 "Information technology — Generic coding of moving pictures and associated audio information: Video".

[ITU BT.470] International Telecommunication Union (http://www.itu.ch), ITU-R Recommendation BT.470-6 "Conventional Television Systems".

[ITU BT.601] International Telecommunication Union (http://www.itu.ch), ITU-R Recommendation BT.601-5 "Studio Encoding Parameters of Digital Television for Standard 4:3 and Wide-Screen 16:9 Aspect Ratios".

[ITU BT.653] International Telecommunication Union (http://www.itu.ch), ITU-R Recommendation BT.653-3 "Teletext systems".

[ITU BT.709] International Telecommunication Union (http://www.itu.ch), ITU-R Recommendation BT.709-5 "Parameter values for the HDTV standards for production and international programme exchange".

[ITU BT.1119] International Telecommunication Union (http://www.itu.ch), ITU-R Recommendation BT.1119 "625-line television Wide Screen Signalling (WSS)".

[JFIF] Independent JPEG Group (http://www.ijg.org), JPEG File Interchange Format: Version 1.02.

[SMPTE 12M] Society of Motion Picture and Television Engineers (http://www.smpte.org), SMPTE 12M-1999 "Television, Audio and Film - Time and Control Code".

[SMPTE 170M] Society of Motion Picture and Television Engineers (http://www.smpte.org), SMPTE 170M-1999 "Television - Composite Analog Video Signal - NTSC for Studio Applications".

[SMPTE 240M] Society of Motion Picture and Television Engineers (http://www.smpte.org), SMPTE 240M-1999 "Television - Signal Parameters - 1125-Line High-Definition Production".

[V4L] Alan Cox, Video4Linux API Specification.

This file is part of the Linux kernel sources under `Documentation/video4linux`.

[V4LPROG] Alan Cox, Video4Linux Programming (a.k.a. The Video4Linux Book), 2000.

About V4L driver programming. This book is part of the Linux kernel DocBook documentation, for example at http://kernelnewbies.org/documents/. SGML sources are included in the kernel sources.

### Notes

[1] | Access permissions are associated with character device special files, hence we must ensure device numbers cannot change with the module load order. To this end minor numbers are no longer automatically assigned by the "videodev" module as in V4L but requested by the driver. The defaults will suffice for most people unless two drivers compete for the same minor numbers.
[2] | In earlier versions of the V4L2 API the module options where named after the device special file with a "unit_" prefix, expressing the minor number itself, not an offset. Rationale for this change is unknown. Lastly the naming and semantics are just a convention among driver writers, the point to note is that minor numbers are not supposed to be hardcoded into drivers.
[3] | Given a device file name one cannot reliable find related devices. For once names are arbitrary and in a system with multiple devices, where only some support VBI capturing, a `/dev/video2` is not necessarily related to `/dev/vbi2`. The V4L `VIDIOCGUNIT` ioctl would require a search for a device file with a particular major and minor number.
[4] | Drivers could recognize the `O_EXCL` open flag. Presently this is not required, so applications cannot know if it really works.
[5] | Actually struct v4l2_audio ought to have a `tuner` field like struct v4l2_input, not only making the API more consistent but also permitting radio devices with multiple tuners.
[6] | Some users are already confused by technical terms PAL, NTSC and SECAM. There is no point asking them to distinguish between B, G, D, or K when the software or hardware can do that automatically.
[7] | An alternative to the current scheme is to use pointers to indices as arguments of `VIDIOC_G_STD` and `VIDIOC_S_STD`, the struct v4l2_input and struct v4l2_output `std` field would be a set of indices like `audioset`. Indices are consistent with the rest of the API and identify the standard unambiguously. In the present scheme of things an enumerated standard is looked up by v4l2_std_id. Now the standards supported by the inputs of a device can overlap. Just assume the tuner and composite input in the example above both exist on a device. An enumeration of "PAL-B/G", "PAL-H/I" suggests a choice which does not exist. We cannot merge or omit sets, because applications would be unable to find the standards reported by `VIDIOC_G_STD`. That leaves separate enumerations for each input. Also selecting a standard by v4l2_std_id can be ambiguous. Advantage of this method is that applications need not identify the standard indirectly, after enumerating. So in summary, the lookup itself is unavoidable. The difference is only whether the lookup is necessary to find an enumerated standard or to switch to a standard by v4l2_std_id.
[8] | See Section 3.5 for a rationale. Probably even USB cameras follow some well known video standard. It might have been better to explicitly indicate elsewhere if a device cannot live up to normal expectations, instead of this exception.
[9] | It will be more convenient for applications if drivers make use of the `V4L2_CTRL_FLAG_DISABLED` flag, but that was never required.
[10] | Applications could call an ioctl to request events. After another process called `VIDIOC_S_CTRL` or another ioctl changing shared properties the `select()` function would indicate readability until any ioctl (querying the properties) is called.
[11] | Enumerating formats an application has no a-priori knowledge of (otherwise it could explicitely ask for them and need not enumerate) seems useless, but there are applications serving as proxy between drivers and the actual video applications for which this is useful.
[12] | It would be desirable if applications could depend on drivers supporting all I/O interfaces, but as much as the complex memory mapping I/O can be inadequate for some devices we have no reason to require this interface, which is most useful for simple applications capturing still images.
[13] | At the driver level `select()` and `poll()` are the same, and `select()` is too important to be optional.
[14] | One could use one file descriptor and set the buffer type field accordingly when calling `VIDIOC_QBUF` etc., but it makes the `select()` function ambiguous. We also like the clean approach of one file descriptor per logical stream. Video overlay for example is also a logical stream, although the CPU is not needed for continuous operation.
[15] | Random enqueue order permits applications processing images out of order (such as video codecs) to return buffers earlier, reducing the probability of data loss. Random fill order allows drivers to reuse buffers on a LIFO-basis, taking advantage of caches holding scatter-gather lists and the like.
[16] | At the driver level `select()` and `poll()` are the same, and `select()` is too important to be optional. The rest should be evident.
[17] | We expect that frequently used buffers are typically not swapped out. Anyway, the process of swapping, locking or generating scatter-gather lists may be time consuming. The delay can be masked by the depth of the incoming buffer queue, and perhaps by maintaining caches assuming a buffer will be soon enqueued again. On the other hand, to optimize memory usage drivers can limit the number of buffers locked in advance and recycle the most recently used buffers first. Of course, the pages of empty buffers in the incoming queue need not be saved to disk. Output buffers must be saved on the incoming and outgoing queue because an application may share them with other processes.
[18] | At the driver level `select()` and `poll()` are the same, and `select()` is too important to be optional. The rest should be evident.
[19] | Since no other Linux multimedia API supports unadjusted time it would be foolish to introduce here. We must use a universally supported clock to synchronize different media, hence time of day.
[20] | A common application of two file descriptors is the XFree86 Xv/V4L interface driver and a V4L2 application. While the X server controls video overlay, the application can take advantage of memory mapping and DMA. In the opinion of the designers of this API, no driver writer taking the efforts to support simultaneous capturing and overlay will restrict this ability by requiring a single file descriptor, as in V4L and earlier versions of V4L2. Making this optional means applications depending on two file descriptors need backup routines to be compatible with all drivers, which is considerable more work than using two fds in applications which do not. Also two fd's fit the general concept of one file descriptor for each logical stream. Hence as a complexity trade-off drivers must support two file descriptors and may support single fd operation.
[21] | The X Window system defines "regions" which are vectors of struct BoxRec { short x1, y1, x2, y2; } with width = x2 - x1 and height = y2 - y1, so one cannot pass X11 clip lists directly.
[22] | ASK: Amplitude-Shift Keying. A high signal level represents a '1' bit, a low level a '0' bit.
[23] | The supported standards may overlap and we need an unambiguous set to find the current standard returned by `VIDIOC_G_STD`.
[24] | `V4L2_CTRL_FLAG_DISABLED` was intended for two purposes: Drivers can skip predefined controls not supported by the hardware (although returning EINVAL would do as well), or disable predefined and private controls after hardware detection without the trouble of reordering control arrays and indices (EINVAL cannot be used to skip private controls because it would prematurely end the enumeration).
[25] | For example video output requires at least two buffers, one displayed and one filled by the application.
[26] | The Linux kernel implements `select()` like the `poll()` function, but `select()` cannot return a `POLLERR`.
[27] | This is not implemented in XFree86.