patch-2.4.25 linux-2.4.25/arch/cris/drivers/Config.in

Next file: linux-2.4.25/arch/cris/drivers/Makefile
Previous file: linux-2.4.25/arch/cris/defconfig
Back to the patch index
Back to the overall index
Lines: 141
Date: 2004-02-18 05:36:30.000000000 -0800
Orig file: linux-2.4.24/arch/cris/drivers/Config.in
Orig date: 2003-08-25 04:44:39.000000000 -0700

diff -urN linux-2.4.24/arch/cris/drivers/Config.in linux-2.4.25/arch/cris/drivers/Config.in
@@ -11,7 +11,10 @@
   "LED_on_when_link      CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK    \
    LED_on_when_activity  CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY" \
      LED_on_when_activity
-
+  choice 'Network LED behavior on no connection' \
+  "RED_LED_on_no_connection      CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION  \
+   LED_OFF_on_no_connection      CONFIG_ETRAX_NETWORK_OFF_ON_NO_CONNECTION" \
+    LED_OFF_on_no_connection
 else
   define_bool CONFIG_NET_ETHERNET n
 fi
@@ -32,12 +35,18 @@
   fi
   bool '  Enable external clock on PB6' CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
   if [ "$CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED" = "y" ]; then
-    int '  Extern clock frequency (baudrate=clk/8) (Hz)' CONFIG_ETRAX_EXTERN_PB6CLK_FREQ
+    int '  Extern clock frequency (baudrate=clk/8) (Hz)' CONFIG_ETRAX_EXTERN_PB6CLK_FREQ 0
   fi
   bool '  Serial port 0 enabled' CONFIG_ETRAX_SERIAL_PORT0
   if [ "$CONFIG_ETRAX_SERIAL_PORT0" = "y" ]; then
-  bool '  Serial port 0 uses DMA6 out' CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-  bool '  Serial port 0 uses DMA7 in' CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+  choice 'Ser0 DMA out assignment' \
+  "NO_DMA_OUT      CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT \
+   DMA6_OUT    CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT" \
+     DMA6_OUT
+  choice 'Ser0 DMA in assignment' \
+  "NO_DMA_IN      CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN \
+   DMA7_IN    CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN" \
+     DMA7_IN
   choice 'Ser0 DTR, RI, DSR and CD assignment' \
   "No_DTR_RI_DSR_CD      CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE \
    DTR_RI_DSR_CD_on_PA   CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA \
@@ -73,8 +82,14 @@
 
   bool '  Serial port 1 enabled' CONFIG_ETRAX_SERIAL_PORT1
   if [ "$CONFIG_ETRAX_SERIAL_PORT1" = "y" ]; then
-  bool '  Serial port 1 uses DMA8 out' CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-  bool '  Serial port 1 uses DMA9 in' CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
+  choice 'Ser1 DMA out assignment' \
+  "NO_DMA_OUT      CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT \
+   DMA8_OUT    CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT" \
+     DMA8_OUT
+  choice 'Ser1 DMA in assignment' \
+  "NO_DMA_IN      CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN \
+   DMA9_IN    CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN" \
+     DMA9_IN
   choice 'Ser1 DTR, RI, DSR and CD assignment' \
   "No_DTR_RI_DSR_CD      CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE \
    DTR_RI_DSR_CD_on_PA   CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PA \
@@ -114,8 +129,14 @@
   fi
   bool '  Serial port 2 enabled' CONFIG_ETRAX_SERIAL_PORT2
   if [ "$CONFIG_ETRAX_SERIAL_PORT2" = "y" ]; then
-  bool '  Serial port 2 uses DMA2 out' CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-  bool '  Serial port 2 uses DMA3 in' CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+  choice 'Ser2 DMA out assignment' \
+  "NO_DMA_OUT      CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT \
+   DMA2_OUT    CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT" \
+     DMA2_OUT
+  choice 'Ser2 DMA in assignment' \
+  "NO_DMA_IN      CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN \
+   DMA3_IN    CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN" \
+     DMA3_IN
   choice 'Ser2 DTR, RI, DSR and CD assignment' \
   "No_DTR_RI_DSR_CD      CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE \
    DTR_RI_DSR_CD_on_PA   CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA \
@@ -149,8 +170,14 @@
   fi
   bool '  Serial port 3 enabled' CONFIG_ETRAX_SERIAL_PORT3
   if [ "$CONFIG_ETRAX_SERIAL_PORT3" = "y" ]; then
-  bool '  Serial port 3 uses DMA4 out' CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-  bool '  Serial port 3 uses DMA5 in' CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
+  choice 'Ser3 DMA out assignment' \
+  "NO_DMA_OUT      CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT \
+   DMA4_OUT    CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT" \
+     DMA4_OUT
+  choice 'Ser3 DMA in assignment' \
+  "NO_DMA_IN      CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN \
+   DMA5_IN    CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN" \
+     DMA5_IN
   choice 'Ser3 DTR, RI, DSR and CD assignment' \
   "No_DTR_RI_DSR_CD      CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE \
    DTR_RI_DSR_CD_on_PA   CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_PA \
@@ -194,13 +221,13 @@
 
 bool 'Synchronous serial port support' CONFIG_ETRAX_SYNCHRONOUS_SERIAL
 if [ "$CONFIG_ETRAX_SYNCHRONOUS_SERIAL" = "y" ]; then 
-  bool '  Synchronous serial port 0 enabled' CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0
+  bool '  Synchronous serial port 0 enabled (sser1)' CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0
   if [ "$CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0" = "y" ]; then
-    bool '    Synchronous serial port 0 uses DMA' CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA
+    bool '    Synchronous serial port 0 uses DMA 8,9' CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA
   fi
-  bool '  Synchronous serial port 1 enabled' CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1
+  bool '  Synchronous serial port 1 enabled (sser3)' CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1
   if [ "$CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1" = "y" ]; then
-    bool '    Synchronous serial port 1 uses DMA' CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA
+    bool '    Synchronous serial port 1 uses DMA 4,5' CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA
   fi 
 fi
 
@@ -253,17 +280,28 @@
 # here we define the CONFIG_'s necessary to enable MTD support
 # for the flash
 	define_bool CONFIG_MTD y
-
-	define_bool CONFIG_MTD_CFI y
-	define_bool CONFIG_MTD_CFI_AMDSTD y
-
-	define_bool CONFIG_MTD_OBSOLETE_CHIPS y
-	define_bool CONFIG_MTD_AMDSTD y
-
+	define_bool CONFIG_MTD_PARTITIONS y
 	define_bool CONFIG_MTD_CHAR y
 	define_bool CONFIG_MTD_BLOCK y
-	define_bool CONFIG_MTD_PARTITIONS y
-	define_bool CONFIG_MTD_CONCAT y
+
+	if [ "$CONFIG_MTD_CFI" = "n" ] && [ "$CONFIG_MTD_AMDSTD" = "n" ] && \
+	   [ "$CONFIG_MTD_MTDRAM" = "n" ]; then
+		# Bad initial configuration, make axisflashmap work by enabling
+		# all drivers it may need.
+
+		define_bool CONFIG_MTD_CFI y
+		define_bool CONFIG_MTD_CFI_AMDSTD y
+
+		define_bool CONFIG_MTD_OBSOLETE_CHIPS y
+		define_bool CONFIG_MTD_AMDSTD y
+
+		define_bool CONFIG_MTD_CONCAT y
+
+		define_bool CONFIG_MTD_MTDRAM y
+		define_int CONFIG_MTDRAM_TOTAL_SIZE 0
+		define_int CONFIG_MTDRAM_ERASE_SIZE 64
+		define_int CONFIG_MTDRAM_ABS_POS 0
+	fi
 fi
 
 bool 'I2C support' CONFIG_ETRAX_I2C
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)