patch-2.4.2 linux/drivers/md/raid5.c
Next file: linux/drivers/media/video/Config.in
Previous file: linux/drivers/md/raid1.c
Back to the patch index
Back to the overall index
- Lines: 128
- Date:
Fri Feb 9 11:30:23 2001
- Orig file:
v2.4.1/linux/drivers/md/raid5.c
- Orig date:
Sat Feb 3 19:51:27 2001
diff -u --recursive --new-file v2.4.1/linux/drivers/md/raid5.c linux/drivers/md/raid5.c
@@ -19,7 +19,7 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/locks.h>
-#include <linux/malloc.h>
+#include <linux/slab.h>
#include <linux/raid/raid5.h>
#include <asm/bitops.h>
#include <asm/atomic.h>
@@ -381,7 +381,7 @@
if (bh == sh->bh_cache[i])
break;
- PRINTK("end_read_request %lu/%d, %d, count: %d, uptodate %d.\n", sh->sector, i, atomic_read(&sh->count), uptodate);
+ PRINTK("end_read_request %lu/%d, count: %d, uptodate %d.\n", sh->sector, i, atomic_read(&sh->count), uptodate);
if (i == disks) {
BUG();
return;
@@ -680,7 +680,6 @@
count = 1;
bh_ptr[0] = sh->bh_cache[pd_idx];
- spin_lock_irq(&conf->device_lock);
switch(method) {
case READ_MODIFY_WRITE:
if (!buffer_uptodate(sh->bh_cache[pd_idx]))
@@ -707,13 +706,11 @@
sh->bh_write[i] = sh->bh_write[i]->b_reqnext;
chosen[i]->b_reqnext = sh->bh_written[i];
sh->bh_written[i] = chosen[i];
- check_xor();
}
break;
case CHECK_PARITY:
break;
}
- spin_unlock_irq(&conf->device_lock);
if (count>1) {
xor_block(count, bh_ptr);
count = 1;
@@ -723,7 +720,6 @@
if (chosen[i]) {
struct buffer_head *bh = sh->bh_cache[i];
char *bdata;
- mark_buffer_clean(chosen[i]); /* NO FIXME */
bdata = bh_kmap(chosen[i]);
memcpy(bh->b_data,
bdata,sh->size);
@@ -766,6 +762,7 @@
PRINTK("adding bh b#%lu to stripe s#%lu\n", bh->b_blocknr, sh->sector);
+ spin_lock(&sh->lock);
spin_lock_irq(&conf->device_lock);
bh->b_reqnext = NULL;
if (rw == READ)
@@ -778,6 +775,7 @@
}
*bhp = bh;
spin_unlock_irq(&conf->device_lock);
+ spin_unlock(&sh->lock);
PRINTK("added bh b#%lu to stripe s#%lu, disk %d.\n", bh->b_blocknr, sh->sector, dd_idx);
}
@@ -827,7 +825,7 @@
for (i=disks; i--; ) {
bh = sh->bh_cache[i];
- PRINTK("check %d: state %lx read %p write %p written %p\n", i, bh->b_state, sh->bh_read[i], sh->bh_write[i], sh->bh_written[i]);
+ PRINTK("check %d: state 0x%lx read %p write %p written %p\n", i, bh->b_state, sh->bh_read[i], sh->bh_write[i], sh->bh_written[i]);
/* maybe we can reply to a read */
if (buffer_uptodate(bh) && sh->bh_read[i]) {
struct buffer_head *rbh, *rbh2;
@@ -867,7 +865,6 @@
* need to be failed
*/
if (failed > 1 && to_read+to_write) {
- spin_lock_irq(&conf->device_lock);
for (i=disks; i--; ) {
/* fail all writes first */
if (sh->bh_write[i]) to_write--;
@@ -878,15 +875,16 @@
}
/* fail any reads if this device is non-operational */
if (!conf->disks[i].operational) {
+ spin_lock_irq(&conf->device_lock);
if (sh->bh_read[i]) to_read--;
while ((bh = sh->bh_read[i])) {
sh->bh_read[i] = bh->b_reqnext;
bh->b_reqnext = return_fail;
return_fail = bh;
}
+ spin_unlock_irq(&conf->device_lock);
}
}
- spin_unlock_irq(&conf->device_lock);
if (syncing) {
md_done_sync(conf->mddev, (sh->size>>10) - sh->sync_redone,0);
clear_bit(STRIPE_SYNCING, &sh->state);
@@ -911,10 +909,8 @@
/* maybe we can return some write requests */
struct buffer_head *wbh, *wbh2;
PRINTK("Return write for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
wbh = sh->bh_written[i];
sh->bh_written[i] = NULL;
- spin_unlock_irq(&conf->device_lock);
while (wbh) {
wbh2 = wbh->b_reqnext;
wbh->b_reqnext = return_ok;
@@ -1076,7 +1072,7 @@
bh->b_end_io(bh, 1);
}
while ((bh=return_fail)) {
- return_ok = bh->b_reqnext;
+ return_fail = bh->b_reqnext;
bh->b_reqnext = NULL;
bh->b_end_io(bh, 0);
}
@@ -1092,8 +1088,6 @@
bh->b_dev = conf->disks[i].dev;
else if (conf->spare && action[i] == WRITE+1)
bh->b_dev = conf->spare->dev;
- else if (action[i] == READ+1)
- BUG();
else skip=1;
if (!skip) {
PRINTK("for %ld schedule op %d on disc %d\n", sh->sector, action[i]-1, i);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)