patch-2.3.9 linux/drivers/usb/usb.h
Next file: linux/drivers/usb/usb_scsi.c
Previous file: linux/drivers/usb/usb.c
Back to the patch index
Back to the overall index
- Lines: 31
- Date:
Mon Jun 28 10:59:14 1999
- Orig file:
v2.3.8/linux/drivers/usb/usb.h
- Orig date:
Tue Jun 22 14:42:23 1999
diff -u --recursive --new-file v2.3.8/linux/drivers/usb/usb.h linux/drivers/usb/usb.h
@@ -276,7 +276,7 @@
int devnum; /* Device number on USB bus */
int slow; /* Slow device? */
int maxpacketsize; /* Maximum packet size */
- int toggle; /* one bit for each endpoint */
+ int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */
int halted; /* endpoint halts */
struct usb_config_descriptor *actconfig;/* the active configuration */
int epmaxpacket[16]; /* endpoint specific maximums */
@@ -362,7 +362,7 @@
#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f)
#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
#define usb_pipedata(pipe) (((pipe) >> 19) & 1)
-#define usb_pipeout(pipe) (((pipe) & 0x80) == 0)
+#define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1)
#define usb_pipeslow(pipe) (((pipe) >> 26) & 1)
#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
@@ -374,9 +374,9 @@
#define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff)
/* The D0/D1 toggle bits */
-#define usb_gettoggle(dev, ep) (((dev)->toggle >> ep) & 1)
-#define usb_dotoggle(dev, ep) ((dev)->toggle ^= (1 << ep))
-#define usb_settoggle(dev, ep, bit) ((dev)->toggle = ((dev)->toggle & ~(1 << ep)) | ((bit) << ep))
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep))
+#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << ep)) | ((bit) << ep))
/* Endpoint halt */
#define usb_endpoint_halt(dev, ep) ((dev)->halted |= (1 << (ep)))
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)