patch-2.3.41 linux/drivers/net/tokenring/abyss.c
Next file: linux/drivers/net/tokenring/abyss.h
Previous file: linux/drivers/net/tokenring/Makefile
Back to the patch index
Back to the overall index
- Lines: 513
- Date:
Wed Jan 26 13:16:05 2000
- Orig file:
v2.3.40/linux/drivers/net/tokenring/abyss.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.40/linux/drivers/net/tokenring/abyss.c linux/drivers/net/tokenring/abyss.c
@@ -0,0 +1,512 @@
+/*
+ * abyss.c: Network driver for the Madge Smart 16/4 PCI Mk2 token ring card.
+ *
+ * Written 1999-2000 by Adam Fritzler
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ *
+ * This driver module supports the following cards:
+ * - Madge Smart 16/4 PCI Mk2
+ *
+ * Maintainer(s):
+ * AF Adam Fritzler mid@auk.cx
+ *
+ * Modification History:
+ * 30-Dec-99 AF Split off from the tms380tr driver.
+ * 22-Jan-00 AF Updated to use indirect read/writes
+ *
+ *
+ * TODO:
+ * 1. See if we can use MMIO instead of inb/outb/inw/outw
+ * 2. Add support for Mk1 (has AT24 attached to the PCI
+ * config registers)
+ *
+ */
+static const char *version = "abyss.c: v1.01 22/01/2000 by Adam Fritzler\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/netdevice.h>
+#include <linux/trdevice.h>
+#include "tms380tr.h"
+#include "abyss.h" /* Madge-specific constants */
+
+#define ABYSS_IO_EXTENT 64
+
+int abyss_probe(void);
+static int abyss_open(struct net_device *dev);
+static int abyss_close(struct net_device *dev);
+static void abyss_enable(struct net_device *dev);
+static int abyss_chipset_init(struct net_device *dev);
+static void abyss_read_eeprom(struct net_device *dev);
+static unsigned short abyss_setnselout_pins(struct net_device *dev);
+
+void at24_writedatabyte(unsigned long regaddr, unsigned char byte);
+int at24_sendfullcmd(unsigned long regaddr, unsigned char cmd, unsigned char addr);
+int at24_sendcmd(unsigned long regaddr, unsigned char cmd);
+unsigned char at24_readdatabit(unsigned long regaddr);
+unsigned char at24_readdatabyte(unsigned long regaddr);
+int at24_waitforack(unsigned long regaddr);
+int at24_waitfornack(unsigned long regaddr);
+void at24_setlines(unsigned long regaddr, unsigned char clock, unsigned char data);
+void at24_start(unsigned long regaddr);
+void at24_stop(unsigned long regaddr);
+unsigned char at24_readb(unsigned long regaddr, unsigned char addr);
+
+static unsigned short abyss_sifreadb(struct net_device *dev, unsigned short reg)
+{
+ return inb(dev->base_addr + reg);
+}
+
+static unsigned short abyss_sifreadw(struct net_device *dev, unsigned short reg)
+{
+ return inw(dev->base_addr + reg);
+}
+
+static void abyss_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg)
+{
+ outb(val, dev->base_addr + reg);
+}
+
+static void abyss_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg)
+{
+ outw(val, dev->base_addr + reg);
+}
+
+struct tms_abyss_card {
+ struct net_device *dev;
+ struct pci_dev *pci_dev;
+ struct tms_abyss_card *next;
+};
+static struct tms_abyss_card *abyss_card_list = NULL;
+
+int __init abyss_probe(void)
+{
+ static int versionprinted = 0;
+ struct pci_dev *pdev = NULL ;
+ struct net_device *dev;
+ struct net_local *tp;
+ int i;
+
+ if (!pci_present())
+ return (-1); /* No PCI present. */
+
+ while ( (pdev=pci_find_class(PCI_CLASS_NETWORK_TOKEN_RING<<8, pdev))) {
+ unsigned int pci_irq_line;
+ unsigned long pci_ioaddr;
+ struct tms_abyss_card *card;
+
+ /* We only support Madge Smart 16/4 PCI Mk2 (Abyss) cards */
+ if ( (pdev->vendor != PCI_VENDOR_ID_MADGE) ||
+ (pdev->device != PCI_DEVICE_ID_MADGE_MK2) )
+ continue;
+
+ if (versionprinted++ == 0)
+ printk("%s", version);
+
+ pci_enable_device(pdev);
+
+ /* Remove I/O space marker in bit 0. */
+ pci_irq_line = pdev->irq;
+ pci_ioaddr = pdev->resource[0].start ;
+
+ if(check_region(pci_ioaddr, ABYSS_IO_EXTENT))
+ continue;
+
+ /* At this point we have found a valid card. */
+
+ dev = init_trdev(NULL, 0);
+
+ request_region(pci_ioaddr, ABYSS_IO_EXTENT, "abyss");
+ if(request_irq(pdev->irq, tms380tr_interrupt, SA_SHIRQ,
+ "abyss", dev)) {
+ release_region(pci_ioaddr, ABYSS_IO_EXTENT) ;
+ continue; /*return (-ENODEV);*/ /* continue; ?? */
+ }
+
+ /*
+ if (load_tms380_module("abyss.c")) {
+ return 0;
+ }
+ */
+
+ pci_ioaddr &= ~3 ;
+ dev->base_addr = pci_ioaddr;
+ dev->irq = pci_irq_line;
+ dev->dma = 0;
+
+ printk("%s: Madge Smart 16/4 PCI Mk2 (Abyss)\n", dev->name);
+ printk("%s: IO: %#4lx IRQ: %d\n",
+ dev->name, pci_ioaddr, dev->irq);
+ /*
+ * The TMS SIF registers lay 0x10 above the card base address.
+ */
+ dev->base_addr += 0x10;
+
+ if (tmsdev_init(dev)) {
+ printk("%s: unable to get memory for dev->priv.\n",
+ dev->name);
+ return 0;
+ }
+
+ abyss_read_eeprom(dev);
+
+ printk("%s: Ring Station Address: ", dev->name);
+ printk("%2.2x", dev->dev_addr[0]);
+ for (i = 1; i < 6; i++)
+ printk(":%2.2x", dev->dev_addr[i]);
+ printk("\n");
+
+ tp = (struct net_local *)dev->priv;
+ tp->dmalimit = 0; /* XXX: should be the max PCI32 DMA max */
+ tp->setnselout = abyss_setnselout_pins;
+ tp->sifreadb = abyss_sifreadb;
+ tp->sifreadw = abyss_sifreadw;
+ tp->sifwriteb = abyss_sifwriteb;
+ tp->sifwritew = abyss_sifwritew;
+
+ memcpy(tp->ProductID, "Madge PCI 16/4 Mk2", PROD_ID_SIZE + 1);
+
+ dev->open = abyss_open;
+ dev->stop = abyss_close;
+
+ if (register_trdev(dev) == 0) {
+ /* Enlist in the card list */
+ card = kmalloc(sizeof(struct tms_abyss_card),
+ GFP_KERNEL);
+ card->next = abyss_card_list;
+ abyss_card_list = card;
+ card->dev = dev;
+ card->pci_dev = pdev;
+ } else {
+ printk("abyss: register_trdev() returned non-zero.\n");
+ kfree(dev->priv);
+ kfree(dev);
+ return -1;
+ }
+ }
+
+ if (abyss_card_list)
+ return 0;
+ return (-1);
+}
+
+unsigned short abyss_setnselout_pins(struct net_device *dev)
+{
+ unsigned short val = 0;
+ struct net_local *tp = (struct net_local *)dev->priv;
+
+ if(tp->DataRate == SPEED_4)
+ val |= 0x01; /* Set 4Mbps */
+ else
+ val |= 0x00; /* Set 16Mbps */
+
+ return val;
+}
+
+/*
+ * The following Madge boards should use this code:
+ * - Smart 16/4 PCI Mk2 (Abyss)
+ * - Smart 16/4 PCI Mk1 (PCI T)
+ * - Smart 16/4 Client Plus PnP (Big Apple)
+ * - Smart 16/4 Cardbus Mk2
+ *
+ * These access an Atmel AT24 SEEPROM using their glue chip registers.
+ *
+ */
+void at24_writedatabyte(unsigned long regaddr, unsigned char byte)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ at24_setlines(regaddr, 0, (byte >> (7-i))&0x01);
+ at24_setlines(regaddr, 1, (byte >> (7-i))&0x01);
+ at24_setlines(regaddr, 0, (byte >> (7-i))&0x01);
+ }
+}
+
+int at24_sendfullcmd(unsigned long regaddr, unsigned char cmd, unsigned char addr)
+{
+ if (at24_sendcmd(regaddr, cmd)) {
+ at24_writedatabyte(regaddr, addr);
+ return at24_waitforack(regaddr);
+ }
+ return 0;
+}
+
+int at24_sendcmd(unsigned long regaddr, unsigned char cmd)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ at24_start(regaddr);
+ at24_writedatabyte(regaddr, cmd);
+ if (at24_waitforack(regaddr))
+ return 1;
+ }
+ return 0;
+}
+
+unsigned char at24_readdatabit(unsigned long regaddr)
+{
+ unsigned char val;
+
+ at24_setlines(regaddr, 0, 1);
+ at24_setlines(regaddr, 1, 1);
+ val = (inb(regaddr) & AT24_DATA)?1:0;
+ at24_setlines(regaddr, 1, 1);
+ at24_setlines(regaddr, 0, 1);
+ return val;
+}
+
+unsigned char at24_readdatabyte(unsigned long regaddr)
+{
+ unsigned char data = 0;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ data <<= 1;
+ data |= at24_readdatabit(regaddr);
+ }
+
+ return data;
+}
+
+int at24_waitforack(unsigned long regaddr)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ if ((at24_readdatabit(regaddr) & 0x01) == 0x00)
+ return 1;
+ }
+ return 0;
+}
+
+int at24_waitfornack(unsigned long regaddr)
+{
+ int i;
+ for (i = 0; i < 10; i++) {
+ if ((at24_readdatabit(regaddr) & 0x01) == 0x01)
+ return 1;
+ }
+ return 0;
+}
+
+void at24_setlines(unsigned long regaddr, unsigned char clock, unsigned char data)
+{
+ unsigned char val;
+ val = AT24_ENABLE;
+ if (clock)
+ val |= AT24_CLOCK;
+ if (data)
+ val |= AT24_DATA;
+
+ outb(val, regaddr);
+ tms380tr_wait(20); /* Very necessary. */
+}
+
+void at24_start(unsigned long regaddr)
+{
+ at24_setlines(regaddr, 0, 1);
+ at24_setlines(regaddr, 1, 1);
+ at24_setlines(regaddr, 1, 0);
+ at24_setlines(regaddr, 0, 1);
+ return;
+}
+
+void at24_stop(unsigned long regaddr)
+{
+ at24_setlines(regaddr, 0, 0);
+ at24_setlines(regaddr, 1, 0);
+ at24_setlines(regaddr, 1, 1);
+ at24_setlines(regaddr, 0, 1);
+ return;
+}
+
+unsigned char at24_readb(unsigned long regaddr, unsigned char addr)
+{
+ unsigned char data = 0xff;
+
+ if (at24_sendfullcmd(regaddr, AT24_WRITE, addr)) {
+ if (at24_sendcmd(regaddr, AT24_READ)) {
+ data = at24_readdatabyte(regaddr);
+ if (!at24_waitfornack(regaddr))
+ data = 0xff;
+ }
+ }
+ return data;
+}
+
+
+/*
+ * Enable basic functions of the Madge chipset needed
+ * for initialization.
+ */
+static void abyss_enable(struct net_device *dev)
+{
+ unsigned char reset_reg;
+ unsigned long ioaddr;
+
+ ioaddr = dev->base_addr;
+ reset_reg = inb(ioaddr + PCIBM2_RESET_REG);
+ reset_reg |= PCIBM2_RESET_REG_CHIP_NRES;
+ outb(reset_reg, ioaddr + PCIBM2_RESET_REG);
+ tms380tr_wait(100);
+ return;
+}
+
+/*
+ * Enable the functions of the Madge chipset needed for
+ * full working order.
+ */
+static int abyss_chipset_init(struct net_device *dev)
+{
+ unsigned char reset_reg;
+ unsigned long ioaddr;
+
+ ioaddr = dev->base_addr;
+
+ reset_reg = inb(ioaddr + PCIBM2_RESET_REG);
+
+ reset_reg |= PCIBM2_RESET_REG_CHIP_NRES;
+ outb(reset_reg, ioaddr + PCIBM2_RESET_REG);
+
+ reset_reg &= ~(PCIBM2_RESET_REG_CHIP_NRES |
+ PCIBM2_RESET_REG_FIFO_NRES |
+ PCIBM2_RESET_REG_SIF_NRES);
+ outb(reset_reg, ioaddr + PCIBM2_RESET_REG);
+
+ tms380tr_wait(100);
+
+ reset_reg |= PCIBM2_RESET_REG_CHIP_NRES;
+ outb(reset_reg, ioaddr + PCIBM2_RESET_REG);
+
+ reset_reg |= PCIBM2_RESET_REG_SIF_NRES;
+ outb(reset_reg, ioaddr + PCIBM2_RESET_REG);
+
+ reset_reg |= PCIBM2_RESET_REG_FIFO_NRES;
+ outb(reset_reg, ioaddr + PCIBM2_RESET_REG);
+
+ outb(PCIBM2_INT_CONTROL_REG_SINTEN |
+ PCIBM2_INT_CONTROL_REG_PCI_ERR_ENABLE,
+ ioaddr + PCIBM2_INT_CONTROL_REG);
+
+ outb(30, ioaddr + PCIBM2_FIFO_THRESHOLD);
+
+ return 0;
+}
+
+void abyss_chipset_close(struct net_device *dev)
+{
+ unsigned long ioaddr;
+
+ ioaddr = dev->base_addr;
+ outb(0, ioaddr + PCIBM2_RESET_REG);
+
+ return;
+}
+
+/*
+ * Read configuration data from the AT24 SEEPROM on Madge cards.
+ *
+ */
+static void abyss_read_eeprom(struct net_device *dev)
+{
+ struct net_local *tp;
+ unsigned long ioaddr;
+ unsigned short val;
+ int i;
+
+ tp = (struct net_local *)dev->priv;
+ ioaddr = dev->base_addr;
+
+ /* Must enable glue chip first */
+ abyss_enable(dev);
+
+ val = at24_readb(ioaddr + PCIBM2_SEEPROM_REG,
+ PCIBM2_SEEPROM_RING_SPEED);
+ tp->DataRate = val?SPEED_4:SPEED_16; /* set open speed */
+ printk("%s: SEEPROM: ring speed: %dMb/sec\n", dev->name, tp->DataRate);
+
+ val = at24_readb(ioaddr + PCIBM2_SEEPROM_REG,
+ PCIBM2_SEEPROM_RAM_SIZE) * 128;
+ printk("%s: SEEPROM: adapter RAM: %dkb\n", dev->name, val);
+
+ dev->addr_len = 6;
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = at24_readb(ioaddr + PCIBM2_SEEPROM_REG,
+ PCIBM2_SEEPROM_BIA+i);
+
+ return;
+}
+
+static int abyss_open(struct net_device *dev)
+{
+ abyss_chipset_init(dev);
+ tms380tr_open(dev);
+ MOD_INC_USE_COUNT;
+ return 0;
+}
+
+static int abyss_close(struct net_device *dev)
+{
+ tms380tr_close(dev);
+ abyss_chipset_close(dev);
+ MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+#ifdef MODULE
+
+int init_module(void)
+{
+ /* Probe for cards. */
+ if (abyss_probe()) {
+ printk(KERN_NOTICE "abyss.c: No cards found.\n");
+ }
+ /* lock_tms380_module(); */
+ return (0);
+}
+
+void cleanup_module(void)
+{
+ struct net_device *dev;
+ struct tms_abyss_card *this_card;
+
+ while (abyss_card_list) {
+ dev = abyss_card_list->dev;
+ unregister_netdev(dev);
+ release_region(dev->base_addr-0x10, ABYSS_IO_EXTENT);
+ free_irq(dev->irq, dev);
+ kfree(dev->priv);
+ kfree(dev);
+ this_card = abyss_card_list;
+ abyss_card_list = this_card->next;
+ kfree(this_card);
+ }
+ /* unlock_tms380_module(); */
+}
+#endif /* MODULE */
+
+
+/*
+ * Local variables:
+ * compile-command: "gcc -DMODVERSIONS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer -I/usr/src/linux/drivers/net/tokenring/ -c abyss.c"
+ * alt-compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer -I/usr/src/linux/drivers/net/tokenring/ -c abyss.c"
+ * c-set-style "K&R"
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)