patch-2.3.10 linux/drivers/net/ewrk3.c
Next file: linux/drivers/net/fmv18x.c
Previous file: linux/drivers/net/ethertap.c
Back to the patch index
Back to the overall index
- Lines: 257
- Date:
Mon Jul 5 20:09:40 1999
- Orig file:
v2.3.9/linux/drivers/net/ewrk3.c
- Orig date:
Thu May 21 14:24:06 1998
diff -u --recursive --new-file v2.3.9/linux/drivers/net/ewrk3.c linux/drivers/net/ewrk3.c
@@ -342,11 +342,8 @@
outb(EEPROM_INIT, EWRK3_IOPR);\
mdelay(1);\
}
-
-
-
-__initfunc(int ewrk3_probe(struct device *dev))
+int __init ewrk3_probe(struct device *dev)
{
int tmp = num_ewrk3s, status = -ENODEV;
u_long iobase = dev->base_addr;
@@ -378,8 +375,8 @@
return status;
}
-__initfunc(static int
- ewrk3_hw_init(struct device *dev, u_long iobase))
+static int __init
+ewrk3_hw_init(struct device *dev, u_long iobase)
{
struct ewrk3_private *lp;
int i, status = 0;
@@ -1285,7 +1282,7 @@
/*
** ISA bus I/O device probe
*/
-__initfunc(static void isa_probe(struct device *dev, u_long ioaddr))
+static void __init isa_probe(struct device *dev, u_long ioaddr)
{
int i = num_ewrk3s, maxSlots;
u_long iobase;
@@ -1325,7 +1322,7 @@
** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually
** the motherboard.
*/
-__initfunc(static void eisa_probe(struct device *dev, u_long ioaddr))
+static void __init eisa_probe(struct device *dev, u_long ioaddr)
{
int i, maxSlots;
u_long iobase;
@@ -1372,8 +1369,8 @@
** are not available then insert a new device structure at the end of
** the current list.
*/
-__initfunc(static struct device *
- alloc_device(struct device *dev, u_long iobase))
+static struct device * __init
+alloc_device(struct device *dev, u_long iobase)
{
struct device *adev = NULL;
int fixed = 0, new_dev = 0;
@@ -1417,8 +1414,8 @@
** If at end of eth device list and can't use current entry, malloc
** one up. If memory could not be allocated, print an error message.
*/
-__initfunc(static struct device *
- insert_device(struct device *dev, u_long iobase, int (*init) (struct device *)))
+static __init struct device *
+insert_device(struct device *dev, u_long iobase, int (*init) (struct device *))
{
struct device *new;
@@ -1443,8 +1440,8 @@
return dev;
}
-__initfunc(static int
- ewrk3_dev_index(char *s))
+static int __init
+ewrk3_dev_index(char *s)
{
int i = 0, j = 0;
@@ -1499,7 +1496,7 @@
/*
** Look for a particular board name in the on-board EEPROM.
*/
-__initfunc(static void EthwrkSignature(char *name, char *eeprom_image))
+static void __init EthwrkSignature(char *name, char *eeprom_image)
{
u_long i, j, k;
char *signatures[] = EWRK3_SIGNATURE;
@@ -1536,7 +1533,7 @@
** ethernet address for later read out.
*/
-__initfunc(static int DevicePresent(u_long iobase))
+static int __init DevicePresent(u_long iobase)
{
union {
struct {
@@ -1573,7 +1570,7 @@
return status;
}
-__initfunc(static u_char get_hw_addr(struct device *dev, u_char * eeprom_image, char chipType))
+static u_char __init get_hw_addr(struct device *dev, u_char * eeprom_image, char chipType)
{
int i, j, k;
u_short chksum;
@@ -1624,7 +1621,7 @@
/*
** Look for a particular board name in the EISA configuration space
*/
-__initfunc(static int EISA_signature(char *name, s32 eisa_id))
+static int __init EISA_signature(char *name, s32 eisa_id)
{
u_long i;
char *signatures[] = EWRK3_SIGNATURE;
@@ -1679,18 +1676,20 @@
tmp.addr[i] = dev->dev_addr[i];
}
ioc->len = ETH_ALEN;
- if (!(status = verify_area(VERIFY_WRITE, (void *) ioc->data, ioc->len))) {
- copy_to_user(ioc->data, tmp.addr, ioc->len);
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len)) {
+ status = -EFAULT;
+ break;
}
- break;
case EWRK3_SET_HWADDR: /* Set the hardware address */
if (capable(CAP_NET_ADMIN)) {
- if (!(status = verify_area(VERIFY_READ, (void *) ioc->data, ETH_ALEN))) {
csr = inb(EWRK3_CSR);
csr |= (CSR_TXD | CSR_RXD);
outb(csr, EWRK3_CSR); /* Disable the TX and RX */
- copy_from_user(tmp.addr, ioc->data, ETH_ALEN);
+ if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) {
+ status = -EFAULT;
+ break;
+ }
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = tmp.addr[i];
outb(tmp.addr[i], EWRK3_PAR0 + i);
@@ -1698,7 +1697,6 @@
csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */
outb(csr, EWRK3_CSR);
- }
} else {
status = -EPERM;
}
@@ -1730,7 +1728,6 @@
break;
case EWRK3_GET_MCA: /* Get the multicast address table */
- if (!(status = verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
while (test_and_set_bit(0, (void *) &lp->lock) != 0); /* Wait for lock to free */
if (lp->shmem_length == IO_ONLY) {
outb(0, EWRK3_IOPR);
@@ -1743,17 +1740,21 @@
memcpy_fromio(tmp.addr, (char *) (lp->shmem_base + PAGE0_HTE), (HASH_TABLE_LEN >> 3));
}
ioc->len = (HASH_TABLE_LEN >> 3);
- copy_to_user(ioc->data, tmp.addr, ioc->len);
- }
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len)) {
+ status = -EFAULT;
+ break;
+ }
+
lp->lock = 0; /* Unlock the page register */
break;
case EWRK3_SET_MCA: /* Set a multicast address */
if (capable(CAP_NET_ADMIN)) {
- if (!(status = verify_area(VERIFY_READ, ioc->data, ETH_ALEN * ioc->len))) {
- copy_from_user(tmp.addr, ioc->data, ETH_ALEN * ioc->len);
- set_multicast_list(dev);
+ if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN * ioc->len)) {
+ status = -EFAULT;
+ break;
}
+ set_multicast_list(dev);
} else {
status = -EPERM;
}
@@ -1781,9 +1782,8 @@
case EWRK3_GET_STATS: /* Get the driver statistics */
cli();
ioc->len = sizeof(lp->pktStats);
- if (!(status = verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
- copy_to_user(ioc->data, &lp->pktStats, ioc->len);
- }
+ if (copy_to_user(ioc->data, &lp->pktStats, ioc->len))
+ status = -EFAULT;
sti();
break;
@@ -1800,16 +1800,16 @@
case EWRK3_GET_CSR: /* Get the CSR Register contents */
tmp.addr[0] = inb(EWRK3_CSR);
ioc->len = 1;
- if (!(status = verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
- copy_to_user(ioc->data, tmp.addr, ioc->len);
- }
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len))
+ status = -EFAULT;
break;
case EWRK3_SET_CSR: /* Set the CSR Register contents */
if (capable(CAP_NET_ADMIN)) {
- if (!(status = verify_area(VERIFY_READ, ioc->data, 1))) {
- copy_from_user(tmp.addr, ioc->data, 1);
- outb(tmp.addr[0], EWRK3_CSR);
+ if (copy_from_user(tmp.addr, ioc->data, 1)) {
+ status = -EFAULT;
+ break;
}
+ outb(tmp.addr[0], EWRK3_CSR);
} else {
status = -EPERM;
}
@@ -1826,9 +1826,8 @@
tmp.addr[i++] = inb(EWRK3_PAR0 + j);
}
ioc->len = EEPROM_MAX + 1 + ETH_ALEN;
- if (!(status = verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
- copy_to_user(ioc->data, tmp.addr, ioc->len);
- }
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len))
+ status = -EFAULT;
} else {
status = -EPERM;
}
@@ -1836,11 +1835,12 @@
break;
case EWRK3_SET_EEPROM: /* Set the EEPROM contents */
if (capable(CAP_NET_ADMIN)) {
- if (!(status = verify_area(VERIFY_READ, ioc->data, EEPROM_MAX))) {
- copy_from_user(tmp.addr, ioc->data, EEPROM_MAX);
- for (i = 0; i < (EEPROM_MAX >> 1); i++) {
- Write_EEPROM(tmp.val[i], iobase, i);
- }
+ if (copy_from_user(tmp.addr, ioc->data, EEPROM_MAX)) {
+ status = -EFAULT;
+ break;
+ }
+ for (i = 0; i < (EEPROM_MAX >> 1); i++) {
+ Write_EEPROM(tmp.val[i], iobase, i);
}
} else {
status = -EPERM;
@@ -1850,9 +1850,8 @@
case EWRK3_GET_CMR: /* Get the CMR Register contents */
tmp.addr[0] = inb(EWRK3_CMR);
ioc->len = 1;
- if (!(status = verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
- copy_to_user(ioc->data, tmp.addr, ioc->len);
- }
+ if (copy_to_user(ioc->data, tmp.addr, ioc->len))
+ status = -EFAULT;
break;
case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */
if (suser()) {
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)