patch-2.4.20 linux-2.4.20/include/asm-mips/pb1100.h

Next file: linux-2.4.20/include/asm-mips/pb1500.h
Previous file: linux-2.4.20/include/asm-mips/pb1000.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/include/asm-mips/pb1100.h linux-2.4.20/include/asm-mips/pb1100.h
@@ -0,0 +1,85 @@
+/*
+ * Alchemy Semi PB1100 Referrence Board
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1100_H
+#define __ASM_PB1100_H
+
+#define PB1100_IDENT          0xAE000000
+#define PB1100_BOARD_STATUS   0xAE000004
+  #define PB1100_ROM_SEL         (1<<15)
+  #define PB1100_ROM_SIZ         (1<<14)
+  #define PB1100_SWAP_BOOT       (1<<13)
+  #define PB1100_FLASH_WP        (1<<12)
+  #define PB1100_ROM_H_STS       (1<<11)
+  #define PB1100_ROM_L_STS       (1<<10)
+  #define PB1100_FLASH_H_STS      (1<<9)
+  #define PB1100_FLASH_L_STS      (1<<8)
+  #define PB1100_SRAM_SIZ         (1<<7)
+  #define PB1100_TSC_BUSY         (1<<6)
+  #define PB1100_PCMCIA_VS_MASK   (3<<4)
+  #define PB1100_RS232_CD         (1<<3)
+  #define PB1100_RS232_CTS        (1<<2)
+  #define PB1100_RS232_DSR        (1<<1)
+  #define PB1100_RS232_RI         (1<<0)
+
+#define PB1100_IRDA_RS232     0xAE00000C
+  #define PB1100_IRDA_FULL       (0<<14) /* full power */
+  #define PB1100_IRDA_SHUTDOWN   (1<<14)
+  #define PB1100_IRDA_TT         (2<<14) /* 2/3 power */
+  #define PB1100_IRDA_OT         (3<<14) /* 1/3 power */
+  #define PB1100_IRDA_FIR        (1<<13)
+
+#define PB1100_MEM_PCMCIA     0xAE000010
+  #define PB1100_SD_WP1_RO       (1<<15) /* read only */
+  #define PB1100_SD_WP0_RO       (1<<14) /* read only */
+  #define PB1100_SD_PWR1         (1<<11) /* applies power to SD1 */
+  #define PB1100_SD_PWR0         (1<<10) /* applies power to SD0 */
+  #define PB1100_SEL_SD_CONN1     (1<<9)
+  #define PB1100_SEL_SD_CONN0     (1<<8)
+  #define PB1100_PC_DEASSERT_RST  (1<<7)
+  #define PB1100_PC_DRV_EN        (1<<4)
+
+#define PB1100_G_CONTROL      0xAE000014 /* graphics control */
+
+#define PB1100_RST_VDDI       0xAE00001C
+  #define PB1100_SOFT_RESET      (1<<15) /* clear to reset the board */
+  #define PB1100_VDDI_MASK        (0x1F)
+
+#define PB1100_LEDS           0xAE000018
+
+/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
+ */
+#define PB1100_HEX_LED        0xAE000018
+
+/* PCMCIA PB1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+
+#endif /* __ASM_PB1100_H */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)