patch-2.2.18 linux/include/linux/cpia.h

• Lines: 221
• Date: Thu Jan 1 01:00:00 1970
• Orig file: v2.2.17/include/linux/cpia.h
• Orig date: Fri Apr 21 23:14:09 2000

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/include/linux/cpia.h linux/include/linux/cpia.h
@@ -1,220 +0,0 @@
-#ifndef cpia_h
-#define cpia_h
-
-/*
- * CPiA Parallel Port Video4Linux driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * (C) Copyright 1999 Bas Huisman,
- *                    Peter Pregler,
- *                    Scott J. Bertin,
- *                    VLSI Vision Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define CPIA_MAJ_VER	0
-#define CPIA_MIN_VER    5
-#define CPIA_PATCH_VER	0
-
-#define CPIA_PP_MAJ_VER       0
-#define CPIA_PP_MIN_VER       5
-#define CPIA_PP_PATCH_VER     0
-
-#define CPIA_MAX_FRAME_SIZE_UNALIGNED	(352 * 288 * 4)   /* CIF at RGB32 */
-#define CPIA_MAX_FRAME_SIZE	((CPIA_MAX_FRAME_SIZE_UNALIGNED + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) /* align above to PAGE_SIZE */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-
-struct cpia_camera_ops
-{
-	/* open sets privdata to point to structure for this camera.
-         * Returns negative value on error, otherwise 0.
-	 */
-	int (*open)(int camnr, void **privdata);
-	
-	/* Registers callback function cb to be called with cbdata
-	 * when an image is ready.  If cb is NULL, only single image grabs
-	 * should be used.  cb should immediately call streamRead to read
-	 * the data or data may be lost. Returns negative value on error,
-	 * otherwise 0.
-	 */
-	int (*registerCallback)(void *privdata, void (*cb)(void *cbdata),
-	                        void *cbdata);
-	
-	/* transferCmd sends commands to the camera.  command MUST point to
-	 * an  8 byte buffer in kernel space. data can be NULL if no extra
-	 * data is needed.  The size of the data is given by the last 2
-	 * bytes of comand.  data must also point to memory in kernel space.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*transferCmd)(void *privdata, u8 *command, u8 *data);
-
-	/* streamStart initiates stream capture mode.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*streamStart)(void *privdata);
-	
-	/* streamStop terminates stream capture mode.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*streamStop)(void *privdata);
-        
-	/* streamRead reads a frame from the camera.  buffer points to a
-         * buffer large enough to hold a complete frame in kernel space.
-         * noblock indicates if this should be a non blocking read.
-	 * Returns the number of bytes read, or negative value on error.
-         */
-	int (*streamRead)(void *privdata, u8 *buffer, int noblock);
-	
-	/* close disables the device until open() is called again.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*close)(void *privdata);
-};
-
-/* cpia_register_camera is called by low level driver for each camera.
- * A unique camera number is returned, or a negative value on error */
-int cpia_register_camera(struct cpia_camera_ops *ops);
-
-/* cpia_unregister_camera is called by low level driver when a camera
- * is removed.  This must not fail. */
-void cpia_unregister_camera(int camnr);
-
-#define CPIA_MAXCAMS		4
-
-/* raw CIF + 64 byte header + (2 bytes line_length + EOL) per line + 4*EOI +
- * one byte 16bit DMA alignment
- */
-#define CPIA_MAX_IMAGE_SIZE ((352*288*2)+64+(288*3)+5)
-
-/* constant value's */
-#define MAGIC_0		0x19
-#define MAGIC_1		0x68
-#define DATA_IN		0xC0
-#define DATA_OUT	0x40
-#define VIDEOSIZE_QCIF	0	/* 176x144 */
-#define VIDEOSIZE_CIF	1	/* 352x288 */
-#define VIDEOSIZE_SIF	2	/* 320x240 */
-#define VIDEOSIZE_QSIF	3	/* 160x120 */
-#define VIDEOSIZE_48_48		4 /* where no one has gone before, iconsize! */
-#define VIDEOSIZE_64_48		5
-#define VIDEOSIZE_128_96	6
-#define VIDEOSIZE_160_120	VIDEOSIZE_QSIF
-#define VIDEOSIZE_176_144	VIDEOSIZE_QCIF
-#define VIDEOSIZE_192_144	7
-#define VIDEOSIZE_224_168	8
-#define VIDEOSIZE_256_192	9
-#define VIDEOSIZE_288_216	10
-#define VIDEOSIZE_320_240	VIDEOSIZE_SIF
-#define VIDEOSIZE_352_288	VIDEOSIZE_CIF
-#define SUBSAMPLE_420	0
-#define SUBSAMPLE_422	1
-#define YUVORDER_YUYV	0
-#define YUVORDER_UYVY	1
-#define NOT_COMPRESSED	0
-#define COMPRESSED	1
-#define NO_DECIMATION	0
-#define DECIMATION_ENAB	1
-#define EOI		0xff	/* End Of Image */
-#define EOL		0xfd	/* End Of Line */
-
-/* Image grab modes */
-#define CPIA_GRAB_SINGLE	0
-#define CPIA_GRAB_CONTINUOUS	1
-
-/* Compression parameters */
-#define CPIA_COMPRESSION_NONE	0
-#define CPIA_COMPRESSION_AUTO	1
-#define CPIA_COMPRESSION_MANUAL	2
-#define CPIA_COMPRESSION_TARGET_QUALITY         0
-#define CPIA_COMPRESSION_TARGET_FRAMERATE       1
-
-/* Return offsets for GetCameraState */
-#define SYSTEMSTATE	0
-#define GRABSTATE	1
-#define STREAMSTATE	2
-#define FATALERROR	3
-#define CMDERROR	4
-#define DEBUGFLAGS	5
-#define VPSTATUS	6
-#define ERRORCODE	7
-
-/* SystemState */
-#define UNINITIALISED_STATE	0
-#define PASS_THROUGH_STATE	1
-#define LO_POWER_STATE		2
-#define HI_POWER_STATE		3
-#define WARM_BOOT_STATE		4
-
-/* GrabState */
-#define GRAB_IDLE		0
-#define GRAB_ACTIVE		1
-#define GRAB_DONE		2
-
-/* StreamState */
-#define STREAM_NOT_READY	0
-#define STREAM_READY		1
-#define STREAM_OPEN		2
-#define STREAM_PAUSED		3
-#define STREAM_FINISHED		4
-
-/* Fatal Error, CmdError, and DebugFlags */
-#define CPIA_FLAG	  1
-#define SYSTEM_FLAG	  2
-#define INT_CTRL_FLAG	  4
-#define PROCESS_FLAG	  8
-#define COM_FLAG	 16
-#define VP_CTRL_FLAG	 32
-#define CAPTURE_FLAG	 64
-#define DEBUG_FLAG	128
-
-/* VPStatus */
-#define VP_STATE_OK			0x00
-
-#define VP_STATE_FAILED_VIDEOINIT	0x01
-#define VP_STATE_FAILED_AECACBINIT	0x02
-#define VP_STATE_AEC_MAX		0x04
-#define VP_STATE_ACB_BMAX		0x08
-
-#define VP_STATE_ACB_RMIN		0x10
-#define VP_STATE_ACB_GMIN		0x20
-#define VP_STATE_ACB_RMAX		0x40
-#define VP_STATE_ACB_GMAX		0x80
-
-/* ErrorCode */
-#define ERROR_FLICKER_BELOW_MIN_EXP     0x01 /*flicker exposure got below minimum exposure */
-
-#define ALOG(lineno,fmt,args...) printk(fmt,lineno,##args)
-#define LOG(fmt,args...) ALOG((__LINE__),KERN_INFO __FILE__":"__FUNCTION__"(%d):"fmt,##args)
-
-#ifdef _CPIA_DEBUG_
-#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, lineno, ##args)
-#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):"__FUNCTION__"(%d):"fmt,##args)
-#else
-#define DBG(fmn,args...) {}
-#endif
-
-#define DEB_BYTE(p)\
-  DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\
-      (p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\
-        (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
-
-#endif /* __KERNEL__ */
-
-#endif /* cpia_h */