patch-2.2.15 linux/drivers/scsi/3w-xxxx.c
Next file: linux/drivers/scsi/3w-xxxx.h
Previous file: linux/drivers/sbus/char/zs.c
Back to the patch index
Back to the overall index
- Lines: 2231
- Date:
Fri Apr 21 12:46:26 2000
- Orig file:
v2.2.14/drivers/scsi/3w-xxxx.c
- Orig date:
Thu Jan 1 01:00:00 1970
diff -u --new-file --recursive --exclude-from ../../exclude v2.2.14/drivers/scsi/3w-xxxx.c linux/drivers/scsi/3w-xxxx.c
@@ -0,0 +1,2230 @@
+/*
+ 3w-xxxx.c -- 3ware Storage Controller device driver for Linux.
+
+ Written By: Adam Radford <linux@3ware.com>
+ Copyright (C) 1999-2000 3ware Inc.
+
+ Kernel compatablity By: Andre Hedrick <andre@suse.com>
+ Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
+
+ Further tiny build fixes and trivial hoovering Alan Cox
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ NO WARRANTY
+ THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ solely responsible for determining the appropriateness of using and
+ distributing the Program and assumes all risks associated with its
+ exercise of rights under this Agreement, including but not limited to
+ the risks and costs of program errors, damage to or loss of data,
+ programs or equipment, and unavailability or interruption of operations.
+
+ DISCLAIMER OF LIABILITY
+ NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ Bugs/Comments/Suggestions should be mailed to:
+ linux@3ware.com
+
+ For more information, goto:
+ http://www.3ware.com
+*/
+
+#include <linux/module.h>
+
+MODULE_AUTHOR ("3ware Inc.");
+MODULE_DESCRIPTION ("3ware Storage Controller Linux Driver");
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/time.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/blk.h>
+#include <linux/hdreg.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+
+#include <asm/spinlock.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define __3W_C /* let 3w-xxxx.h know it is use */
+
+#include "sd.h"
+#include "scsi.h"
+#include "hosts.h"
+
+#include "3w-xxxx.h"
+
+static int tw_copy_info(TW_Info *info, char *fmt, ...);
+static void tw_copy_mem_info(TW_Info *info, char *data, int len);
+static void tw_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+
+struct proc_dir_entry tw_scsi_proc_entry = {
+ PROC_SCSI_3W_XXXX,
+ 7, "3w-xxxx",
+ S_IFDIR|S_IRUGO|S_IXUGO, 2
+};
+
+/* Globals */
+char *tw_driver_version="1.1.000";
+TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
+int tw_device_extension_count = 0;
+
+/* Functions */
+
+/* This function will complete an aen request from the isr */
+int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id)
+{
+ TW_Param *param;
+ unsigned short aen, aen_code;
+
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ aen = *(unsigned short *)(param->data);
+ aen_code = (aen & 0x0ff);
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen_code);
+ /* Now queue the code */
+ tw_dev->aen_queue[tw_dev->aen_tail] = aen_code;
+ if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
+ tw_dev->aen_tail = TW_Q_START;
+ } else {
+ tw_dev->aen_tail = tw_dev->aen_tail + 1;
+ }
+ if (tw_dev->aen_head == tw_dev->aen_tail) {
+ if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
+ tw_dev->aen_head = TW_Q_START;
+ } else {
+ tw_dev->aen_head = tw_dev->aen_head + 1;
+ }
+ }
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+
+ return 0;
+} /* End tw_aen_complete() */
+
+/* This function will drain the aen queue after a soft reset */
+int tw_aen_drain_queue(TW_Device_Extension *tw_dev)
+{
+ TW_Command *command_packet;
+ TW_Param *param;
+ int tries = 0;
+ int request_id = 0;
+ u32 command_que_value = 0, command_que_addr;
+ u32 status_reg_value = 0, status_reg_addr;
+ u32 param_value;
+ TW_Response_Queue response_queue;
+ u32 response_que_addr;
+ unsigned short aen;
+ unsigned short aen_code;
+ int finished = 0;
+ int first_reset = 0;
+ int queue = 0;
+ int imax, i;
+ int found = 0;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n");
+
+ command_que_addr = tw_dev->registers.command_que_addr;
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ response_que_addr = tw_dev->registers.response_que_addr;
+
+ if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT, 15)) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d\n", tw_dev->host->host_no);
+ return 1;
+ }
+
+ /* Initialize command packet */
+ if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n");
+ return 1;
+ }
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ memset(command_packet, 0, sizeof(TW_Sector));
+ command_packet->byte0.opcode = TW_OP_GET_PARAM;
+ command_packet->byte0.sgl_offset = 2;
+ command_packet->size = 4;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = 0;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+ command_packet->byte6.parameter_count = 1;
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ if (command_que_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n");
+ return 1;
+ }
+
+ /* Now setup the param */
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ memset(param, 0, sizeof(TW_Sector));
+ param->table_id = 0x401; /* AEN table */
+ param->parameter_id = 2; /* Unit code */
+ param->parameter_size_bytes = 2;
+ param_value = tw_dev->alignment_physical_address[request_id];
+ if (param_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n");
+ return 1;
+ }
+ command_packet->byte8.param.sgl[0].address = param_value;
+ command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
+
+ imax = TW_POLL_MAX_RETRIES;
+
+ /* Now drain the controller's aen queue */
+ do {
+ /* Post command packet */
+ outl(command_que_value, command_que_addr);
+
+ /* Now poll for completion */
+ for (i=0;i<imax;i++) {
+ mdelay(10);
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected bits.\n");
+ return 1;
+ }
+ if ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
+ response_queue.value = inl(response_que_addr);
+ request_id = (unsigned char)response_queue.u.response_id;
+
+ if (request_id != 0) {
+ /* Unexpected request id */
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n");
+ return 1;
+ }
+
+ if (command_packet->status != 0) {
+ if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) {
+ /* Bad response */
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad response, flags = 0x%x.\n", command_packet->flags);
+ return 1;
+ } else {
+ /* We know this is a 3w-1x00, and doesn't support aen's */
+ return 0;
+ }
+ }
+
+ /* Now check the aen */
+ aen = *(unsigned short *)(param->data);
+ aen_code = (aen & 0x0ff);
+ queue = 0;
+ switch (aen_code) {
+ case TW_AEN_QUEUE_EMPTY:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_QUEUE_EMPTY.\n");
+ if (first_reset != 1) {
+ continue;
+ } else {
+ finished = 1;
+ }
+ break;
+ case TW_AEN_SOFT_RESET:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_SOFT_RESET.\n");
+ if (first_reset == 0) {
+ first_reset = 1;
+ } else {
+ queue = 1;
+ }
+ break;
+ case TW_AEN_DEGRADED_MIRROR:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_DEGRADED_MIRROR.\n");
+ queue = 1;
+ break;
+ case TW_AEN_CONTROLLER_ERROR:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_CONTROLLER_ERROR.\n");
+ queue = 1;
+ break;
+ case TW_AEN_REBUILD_FAIL:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_REBUILD_FAIL.\n");
+ queue = 1;
+ break;
+ case TW_AEN_REBUILD_DONE:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_REBUILD_DONE.\n");
+ queue = 1;
+ break;
+ case TW_AEN_QUEUE_FULL:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue(): Found TW_AEN_QUEUE_FULL.\n");
+ queue = 1;
+ break;
+ default:
+ dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unknown AEN code 0x%x.\n", aen_code);
+ queue = 1;
+ }
+
+ /* Now put the aen on the aen_queue */
+ if (queue == 1) {
+ tw_dev->aen_queue[tw_dev->aen_tail] = aen_code;
+ if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
+ tw_dev->aen_tail = TW_Q_START;
+ } else {
+ tw_dev->aen_tail = tw_dev->aen_tail + 1;
+ }
+ if (tw_dev->aen_head == tw_dev->aen_tail) {
+ if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
+ tw_dev->aen_head = TW_Q_START;
+ } else {
+ tw_dev->aen_head = tw_dev->aen_head + 1;
+ }
+ }
+ }
+ found = 1;
+ break;
+ }
+ }
+ if (found == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n");
+ return 1;
+ }
+ tries++;
+ } while ((tries < TW_MAX_AEN_TRIES) && (finished == 0));
+
+ if (tries >=TW_MAX_AEN_TRIES) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Aen queue error.\n");
+ return 1;
+ }
+
+ return 0;
+} /* End tw_aen_drain_queue() */
+
+/* This function will read the aen queue from the isr */
+int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
+{
+ TW_Command *command_packet;
+ TW_Param *param;
+ u32 command_que_value = 0, command_que_addr;
+ u32 status_reg_value = 0, status_reg_addr;
+ u32 param_value = 0;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n");
+ command_que_addr = tw_dev->registers.command_que_addr;
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n");
+ return 1;
+ }
+ if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n");
+ return 1;
+ }
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ memset(command_packet, 0, sizeof(TW_Sector));
+ command_packet->byte0.opcode = TW_OP_GET_PARAM;
+ command_packet->byte0.sgl_offset = 2;
+ command_packet->size = 4;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = 0;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+ command_packet->byte6.parameter_count = 1;
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ if (command_que_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n");
+ return 1;
+ }
+ /* Now setup the param */
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ memset(param, 0, sizeof(TW_Sector));
+ param->table_id = 0x401; /* AEN table */
+ param->parameter_id = 2; /* Unit code */
+ param->parameter_size_bytes = 2;
+ param_value = tw_dev->alignment_physical_address[request_id];
+ if (param_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n");
+ return 1;
+ }
+ command_packet->byte8.param.sgl[0].address = param_value;
+ command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
+
+ /* Now post the command packet */
+ if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
+ dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n");
+ tw_dev->srb[request_id] = 0; /* Flag internal command */
+ tw_dev->state[request_id] = TW_S_POSTED;
+ outl(command_que_value, command_que_addr);
+ } else {
+ printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n");
+ return 1;
+ }
+
+ return 0;
+} /* End tw_aen_read_queue() */
+
+/* This function will allocate memory and check if it is 16 d-word aligned */
+int tw_allocate_memory(TW_Device_Extension *tw_dev, int request_id, int size, int which)
+{
+ u32 *virt_addr;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n");
+
+ if (which == 0) {
+ /* Allocate command packet memory */
+ virt_addr = kmalloc(size, GFP_ATOMIC);
+ if (virt_addr == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): kmalloc() failed.\n");
+ return 1;
+ }
+ if ((u32)virt_addr % TW_ALIGNMENT) {
+ printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): Found unaligned address.\n");
+ return 1;
+ }
+ tw_dev->command_packet_virtual_address[request_id] = virt_addr;
+ tw_dev->command_packet_physical_address[request_id] =
+ virt_to_bus(virt_addr);
+ } else {
+ /* Allocate generic buffer */
+ virt_addr = kmalloc(size, GFP_ATOMIC);
+ if (virt_addr == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): kmalloc() failed.\n");
+ return 1;
+ }
+ if ((u32)virt_addr % TW_ALIGNMENT) {
+ printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): Found unaligned address.\n");
+ return 1;
+ }
+ tw_dev->alignment_virtual_address[request_id] = virt_addr;
+ tw_dev->alignment_physical_address[request_id] = virt_to_bus(virt_addr);
+ }
+ return 0;
+} /* End tw_allocate_memory() */
+
+/* This function will check the status register for unexpected bits */
+int tw_check_bits(u32 status_reg_value)
+{
+ if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) {
+ printk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value);
+ return 1;
+ }
+ if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value);
+ return 1;
+ }
+
+ return 0;
+} /* End tw_check_bits() */
+
+/* This function will report controller error status */
+int tw_check_errors(TW_Device_Extension *tw_dev)
+{
+ u32 status_reg_addr, status_reg_value;
+
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ status_reg_value = inl(status_reg_addr);
+
+ if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value))
+ return 1;
+
+ return 0;
+} /* End tw_check_errors() */
+
+/* This function will clear the attention interrupt */
+void tw_clear_attention_interrupt(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_addr, control_reg_value;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = TW_CONTROL_CLEAR_ATTENTION_INTERRUPT;
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_clear_attention_interrupt() */
+
+/* This function will clear the host interrupt */
+void tw_clear_host_interrupt(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_addr, control_reg_value;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = TW_CONTROL_CLEAR_HOST_INTERRUPT;
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_clear_host_interrupt() */
+
+/* This function is called by tw_scsi_proc_info */
+static int tw_copy_info(TW_Info *info, char *fmt, ...)
+{
+ va_list args;
+ char buf[81];
+ int len;
+
+ va_start(args, fmt);
+ len = vsprintf(buf, fmt, args);
+ va_end(args);
+ tw_copy_mem_info(info, buf, len);
+ return len;
+} /* End tw_copy_info() */
+
+/* This function is called by tw_scsi_proc_info */
+static void tw_copy_mem_info(TW_Info *info, char *data, int len)
+{
+ if (info->position + len > info->length)
+ len = info->length - info->position;
+
+ if (info->position + len < info->offset) {
+ info->position += len;
+ return;
+ }
+ if (info->position < info->offset) {
+ data += (info->offset - info->position);
+ len -= (info->offset - info->position);
+ }
+ if (len > 0) {
+ memcpy(info->buffer + info->position, data, len);
+ info->position += len;
+ }
+} /* End tw_copy_mem_info() */
+
+/* This function will disable interrupts on the controller */
+void tw_disable_interrupts(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_value, control_reg_addr;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = TW_CONTROL_DISABLE_INTERRUPTS;
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_disable_interrupts() */
+
+/* This function will empty the response que */
+int tw_empty_response_que(TW_Device_Extension *tw_dev)
+{
+ u32 status_reg_addr, status_reg_value;
+ u32 response_que_addr, response_que_value;
+
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ response_que_addr = tw_dev->registers.response_que_addr;
+
+ status_reg_value = inl(status_reg_addr);
+
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_empty_response_queue(): Unexpected bits 1.\n");
+ return 1;
+ }
+
+ while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
+ response_que_value = inl(response_que_addr);
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_empty_response_queue(): Unexpected bits 2.\n");
+ return 1;
+ }
+ }
+ return 0;
+} /* End tw_empty_response_que() */
+
+/* This function will enable interrupts on the controller */
+void tw_enable_interrupts(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_value, control_reg_addr;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = (TW_CONTROL_CLEAR_ATTENTION_INTERRUPT |
+ TW_CONTROL_UNMASK_RESPONSE_INTERRUPT |
+ TW_CONTROL_ENABLE_INTERRUPTS);
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_enable_interrupts() */
+
+/* This function will find and initialize all cards */
+int tw_findcards(Scsi_Host_Template *tw_host)
+{
+ int numcards = 0, tries = 0, error = 0;
+ struct Scsi_Host *host;
+ TW_Device_Extension *tw_dev;
+ TW_Device_Extension *tw_dev2;
+ struct pci_dev *tw_pci_dev = pci_devices;
+ u32 status_reg_value;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_findcards()\n");
+ while ((tw_pci_dev = pci_find_device(TW_VENDOR_ID, TW_DEVICE_ID, tw_pci_dev))) {
+ /* Prepare temporary device extension */
+ tw_dev=(TW_Device_Extension *)kmalloc(sizeof(TW_Device_Extension), GFP_ATOMIC);
+ if (tw_dev == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): kmalloc() failed for card %d.\n", numcards);
+ continue;
+ }
+ memset(tw_dev, 0, sizeof(TW_Device_Extension));
+
+ error = tw_initialize_device_extension(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Couldn't initialize device extension for card %d.\n", numcards);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ /* Calculate the cards register addresses */
+ tw_dev->registers.base_addr = tw_pci_dev->base_address[0];
+ tw_dev->registers.control_reg_addr = (tw_pci_dev->base_address[0] & ~15);
+ tw_dev->registers.status_reg_addr = ((tw_pci_dev->base_address[0] & ~15) + 0x4);
+ tw_dev->registers.command_que_addr = ((tw_pci_dev->base_address[0] & ~15) + 0x8);
+ tw_dev->registers.response_que_addr = ((tw_pci_dev->base_address[0] & ~15) + 0xC);
+ /* Save pci_dev struct to device extension */
+ tw_dev->tw_pci_dev = tw_pci_dev;
+
+ /* Poll status register for 60 secs for 'Controller Ready' flag */
+ if (tw_poll_status(tw_dev, TW_STATUS_MICROCONTROLLER_READY, 60)) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Microcontroller not ready for card %d.\n", numcards);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ /* Disable interrupts on the card */
+ tw_disable_interrupts(tw_dev);
+
+ while (tries < TW_MAX_RESET_TRIES) {
+ /* Do soft reset */
+ tw_soft_reset(tw_dev);
+
+ error = tw_aen_drain_queue(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): No attention interrupt for card %d.\n", numcards);
+ tries++;
+ continue;
+ }
+
+ /* Check for controller errors */
+ if (tw_check_errors(tw_dev)) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Controller errors found, soft resetting card %d.\n", numcards);
+ tries++;
+ continue;
+ }
+
+ /* Empty the response queue */
+ error = tw_empty_response_que(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Couldn't empty response queue for card %d.\n", numcards);
+ tries++;
+ continue;
+ }
+
+ /* Now the controller is in a good state */
+ break;
+ }
+
+ if (tries >= TW_MAX_RESET_TRIES) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Controller error or no attention interrupt: giving up for card %d.\n", numcards);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ /* Make sure that io region isn't already taken */
+ if (check_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE)) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Couldn't get io range 0x%lx-0x%lx for card %d.\n",
+ (tw_dev->tw_pci_dev->base_address[0]),
+ (tw_dev->tw_pci_dev->base_address[0]) +
+ TW_IO_ADDRESS_RANGE, numcards);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ /* Reserve the io address space */
+ request_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE, TW_DEVICE_NAME);
+ error = tw_initialize_units(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Couldn't initialize units for card %d.\n", numcards);
+ release_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ error = tw_initconnection(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Couldn't initconnection for card %d.\n", numcards);
+ release_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ /* Calculate max cmds per lun */
+ if (tw_dev->num_units > 0)
+ tw_host->cmd_per_lun = (TW_Q_LENGTH-2)/tw_dev->num_units;
+
+ /* Register the card with the kernel SCSI layer */
+ host = scsi_register(tw_host, sizeof(TW_Device_Extension));
+
+ /* FIXME - check for NULL */
+
+ status_reg_value = inl(tw_dev->registers.status_reg_addr);
+
+ dprintk(KERN_NOTICE "scsi%d : Found a 3ware Storage Controller at 0x%x, IRQ: %d P-chip: %d.%d\n", host->host_no,
+ (u32)(tw_pci_dev->base_address[0]), tw_pci_dev->irq,
+ (status_reg_value & TW_STATUS_MAJOR_VERSION_MASK) >> 28,
+ (status_reg_value & TW_STATUS_MINOR_VERSION_MASK) >> 24);
+
+ if (host->hostdata) {
+ tw_dev2 = (TW_Device_Extension *)host->hostdata;
+ memcpy(tw_dev2, tw_dev, sizeof(TW_Device_Extension));
+ tw_device_extension_list[tw_device_extension_count] = tw_dev2;
+ numcards++;
+ tw_device_extension_count = numcards;
+ tw_dev2->host = host;
+ } else {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Bad scsi host data for card %d.\n", numcards-1);
+ scsi_unregister(host);
+ release_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE);
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ continue;
+ }
+
+ /* Re-enable interrupts on the card */
+ tw_enable_interrupts(tw_dev2);
+
+ /* Now setup the interrupt handler */
+ error = tw_setup_irq(tw_dev2);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): Error requesting irq for card %d.\n", numcards-1);
+ scsi_unregister(host);
+ release_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE);
+
+ tw_free_device_extension(tw_dev);
+ kfree(tw_dev);
+ numcards--;
+ continue;
+ }
+
+ /* Free the temporary device extension */
+ if (tw_dev)
+ kfree(tw_dev);
+ }
+
+ if (numcards == 0)
+ printk(KERN_WARNING "3w-xxxx: tw_findcards(): No cards found.\n");
+
+ return numcards;
+} /* End tw_findcards() */
+
+/* This function will free up device extension resources */
+void tw_free_device_extension(TW_Device_Extension *tw_dev)
+{
+ int i, imax;
+ imax = TW_Q_LENGTH;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n");
+ /* Free command packet and generic buffer memory */
+ for (i=0;i<imax;i++) {
+ if (tw_dev->command_packet_virtual_address[i])
+ kfree(tw_dev->command_packet_virtual_address[i]);
+
+ if (tw_dev->alignment_virtual_address[i])
+ kfree(tw_dev->alignment_virtual_address[i]);
+ }
+} /* End tw_free_device_extension() */
+
+/* This function will send an initconnection command to controller */
+int tw_initconnection(TW_Device_Extension *tw_dev)
+{
+ u32 command_que_addr, command_que_value;
+ u32 status_reg_addr, status_reg_value;
+ u32 response_que_addr;
+ TW_Command *command_packet;
+ TW_Response_Queue response_queue;
+ int request_id = 0;
+ int i = 0;
+ int imax = 0;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n");
+ command_que_addr = tw_dev->registers.command_que_addr;
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ response_que_addr = tw_dev->registers.response_que_addr;
+
+ /* Initialize InitConnection command packet */
+ if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n");
+ return 1;
+ }
+
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ memset(command_packet, 0, sizeof(TW_Sector));
+ command_packet->byte0.opcode = TW_OP_INIT_CONNECTION;
+ command_packet->byte0.sgl_offset = 0x0;
+ command_packet->size = TW_INIT_COMMAND_PACKET_SIZE;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = 0x0;
+ command_packet->byte3.host_id = 0x0;
+ command_packet->status = 0x0;
+ command_packet->flags = 0x0;
+ command_packet->byte6.message_credits = TW_INIT_MESSAGE_CREDITS;
+ command_packet->byte8.init_connection.response_queue_pointer = 0x0;
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+
+ if (command_que_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n");
+ return 1;
+ }
+
+ /* Send command packet to the board */
+ outl(command_que_value, command_que_addr);
+
+ /* Poll for completion */
+ imax = TW_POLL_MAX_RETRIES;
+ for (i=0;i<imax;i++) {
+ mdelay(10);
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected bits.\n");
+ return 1;
+ }
+ if ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
+ response_queue.value = inl(response_que_addr);
+ request_id = (unsigned char)response_queue.u.response_id;
+ if (request_id != 0) {
+ /* unexpected request id */
+ printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n");
+ return 1;
+ }
+ if (command_packet->status != 0) {
+ /* bad response */
+ printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad response, flags = 0x%x.\n", command_packet->flags);
+ return 1;
+ }
+ break; /* Response was okay, so we exit */
+ }
+ }
+ return 0;
+} /* End tw_initconnection() */
+
+/* This function will initialize the fields of a device extension */
+int tw_initialize_device_extension(TW_Device_Extension *tw_dev)
+{
+ int i, imax;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n");
+ imax = TW_Q_LENGTH;
+
+ for (i=0; i<imax; i++) {
+ /* Initialize command packet buffers */
+ tw_allocate_memory(tw_dev, i, sizeof(TW_Sector), 0);
+ if (tw_dev->command_packet_virtual_address[i] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_device_extension(): Bad command packet virtual address.\n");
+ return 1;
+ }
+ memset(tw_dev->command_packet_virtual_address[i], 0, sizeof(TW_Sector));
+
+ /* Initialize generic buffer */
+ tw_allocate_memory(tw_dev, i, sizeof(TW_Sector), 1);
+ if (tw_dev->alignment_virtual_address[i] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_device_extension(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ memset(tw_dev->alignment_virtual_address[i], 0, sizeof(TW_Sector));
+
+ tw_dev->free_queue[i] = i;
+ tw_dev->state[i] = TW_S_INITIAL;
+ tw_dev->ioctl_size[i] = 0;
+ tw_dev->aen_queue[i] = 0;
+ }
+
+ for (i=0;i<TW_MAX_UNITS;i++)
+ tw_dev->is_unit_present[i] = 0;
+
+ tw_dev->num_units = 0;
+ tw_dev->num_aborts = 0;
+ tw_dev->num_resets = 0;
+ tw_dev->free_head = TW_Q_START;
+ tw_dev->free_tail = TW_Q_LENGTH - 1;
+ tw_dev->posted_request_count = 0;
+ tw_dev->max_posted_request_count = 0;
+ tw_dev->max_sgl_entries = 0;
+ tw_dev->sgl_entries = 0;
+ tw_dev->host = NULL;
+ tw_dev->pending_head = TW_Q_START;
+ tw_dev->pending_tail = TW_Q_START;
+ tw_dev->aen_head = 0;
+ tw_dev->aen_tail = 0;
+ tw_dev->sector_count = 0;
+ tw_dev->max_sector_count = 0;
+ spin_lock_init(&tw_dev->tw_lock);
+ return 0;
+} /* End tw_initialize_device_extension() */
+
+/* This function will get unit info from the controller */
+int tw_initialize_units(TW_Device_Extension *tw_dev)
+{
+ int found = 0;
+ unsigned char request_id = 0;
+ TW_Command *command_packet;
+ TW_Param *param;
+ int i, imax, num_units = 0;
+ u32 status_reg_addr, status_reg_value;
+ u32 command_que_addr, command_que_value;
+ u32 response_que_addr;
+ TW_Response_Queue response_queue;
+ u32 param_value;
+ unsigned char *is_unit_present;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_units()\n");
+
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ command_que_addr = tw_dev->registers.command_que_addr;
+ response_que_addr = tw_dev->registers.response_que_addr;
+
+ /* Setup the command packet */
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ if (command_packet == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Bad command packet virtual address.\n");
+ return 1;
+ }
+ memset(command_packet, 0, sizeof(TW_Sector));
+ command_packet->byte0.opcode = TW_OP_GET_PARAM;
+ command_packet->byte0.sgl_offset = 2;
+ command_packet->size = 4;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = 0;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+ command_packet->byte6.block_count = 1;
+
+ /* Now setup the param */
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ memset(param, 0, sizeof(TW_Sector));
+ param->table_id = 3; /* unit summary table */
+ param->parameter_id = 3; /* unitstatus parameter */
+ param->parameter_size_bytes = TW_MAX_UNITS;
+ param_value = tw_dev->alignment_physical_address[request_id];
+ if (param_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Bad alignment physical address.\n");
+ return 1;
+ }
+
+ command_packet->byte8.param.sgl[0].address = param_value;
+ command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
+
+ /* Post the command packet to the board */
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ if (command_que_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Bad command packet physical address.\n");
+ return 1;
+ }
+ outl(command_que_value, command_que_addr);
+
+ /* Poll for completion */
+ imax = TW_POLL_MAX_RETRIES;
+ for(i=0; i<imax; i++) {
+ mdelay(10);
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Unexpected bits.\n");
+ return 1;
+ }
+ if ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
+ response_queue.value = inl(response_que_addr);
+ request_id = (unsigned char)response_queue.u.response_id;
+ if (request_id != 0) {
+ /* unexpected request id */
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Unexpected request id.\n");
+ return 1;
+ }
+ if (command_packet->status != 0) {
+ /* bad response */
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): Bad response, flags = 0x%x.\n", command_packet->flags);
+ return 1;
+ }
+ found = 1;
+ break;
+ }
+ }
+ if (found == 0) {
+ /* response never received */
+ printk(KERN_WARNING "3w-xxxx: tw_initialize_units(): No response.\n");
+ return 1;
+ }
+
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ is_unit_present = (unsigned char *)&(param->data[0]);
+
+ /* Show all units present */
+ imax = TW_MAX_UNITS;
+ for(i=0; i<imax; i++) {
+ if (is_unit_present[i] == 0) {
+ tw_dev->is_unit_present[i] = FALSE;
+ } else {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_units(): Unit %d found.\n", i);
+ tw_dev->is_unit_present[i] = TRUE;
+ num_units++;
+ }
+ }
+ tw_dev->num_units = num_units;
+
+ if (num_units == 0) {
+ printk(KERN_NOTICE "3w-xxxx: tw_initialize_units(): No units found.\n");
+ return 1;
+ }
+
+ return 0;
+} /* End tw_initialize_units() */
+
+/* This function is the interrupt service routine */
+static void tw_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ int request_id;
+ u32 status_reg_addr, status_reg_value;
+ u32 response_que_addr;
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
+ TW_Response_Queue response_que;
+ int error = 0;
+ int do_response_interrupt=0;
+ int do_attention_interrupt=0;
+ int do_host_interrupt=0;
+ int do_command_interrupt=0;
+ int flags = 0;
+ int flags2 = 0;
+ TW_Command *command_packet;
+ spin_lock_irqsave(&io_request_lock, flags);
+
+ if (tw_dev->tw_pci_dev->irq == irq) {
+ spin_lock_irqsave(&tw_dev->tw_lock, flags2);
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt()\n");
+
+ /* Read the registers */
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ response_que_addr = tw_dev->registers.response_que_addr;
+ status_reg_value = inl(status_reg_addr);
+
+ /* Check which interrupt */
+ if (status_reg_value & TW_STATUS_HOST_INTERRUPT)
+ do_host_interrupt=1;
+ if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT)
+ do_attention_interrupt=1;
+ if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT)
+ do_command_interrupt=1;
+ if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT)
+ do_response_interrupt=1;
+
+ /* Handle host interrupt */
+ if (do_host_interrupt) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n");
+ tw_clear_host_interrupt(tw_dev);
+ }
+
+ /* Handle attention interrupt */
+ if (do_attention_interrupt) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n");
+ tw_state_request_start(tw_dev, &request_id);
+ error = tw_aen_read_queue(tw_dev, request_id);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Error reading aen queue.\n");
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ } else {
+ dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Clearing attention interrupt.\n");
+ tw_clear_attention_interrupt(tw_dev);
+ }
+ }
+
+ /* Handle command interrupt */
+ if (do_command_interrupt) {
+ /* Drain as many pending commands as we can */
+ while (tw_dev->pending_request_count > 0) {
+ request_id = tw_dev->pending_queue[tw_dev->pending_head];
+ if (tw_dev->state[request_id] != TW_S_PENDING) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found request id that wasn't pending.\n");
+ break;
+ }
+ if (tw_post_command_packet(tw_dev, request_id)==0) {
+ if (tw_dev->pending_head == TW_Q_LENGTH-1) {
+ tw_dev->pending_head = TW_Q_START;
+ } else {
+ tw_dev->pending_head = tw_dev->pending_head + 1;
+ }
+ tw_dev->pending_request_count--;
+ } else {
+ break;
+ }
+ }
+ /* If there are no more pending requests, we mask command interrupt */
+ if (tw_dev->pending_request_count == 0)
+ tw_mask_command_interrupt(tw_dev);
+ }
+
+ /* Handle response interrupt */
+ if (do_response_interrupt) {
+ /* Drain the response queue from the board */
+ while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
+ response_que.value = inl(response_que_addr);
+ request_id = response_que.u.response_id;
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ if (command_packet->status != 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Bad response, flags = 0x%x.\n", command_packet->flags);
+ }
+ if (tw_dev->state[request_id] != TW_S_POSTED) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Received a request id (%d) (opcode = 0x%x) that wasn't posted.\n", request_id, command_packet->byte0.opcode);
+ }
+ error = 0;
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id);
+ /* Check for internal command */
+ if (tw_dev->srb[request_id] == 0) {
+ dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n");
+ error = tw_aen_complete(tw_dev, request_id);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Error completing aen.\n");
+ }
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
+ }
+ } else {
+ switch (tw_dev->srb[request_id]->cmnd[0]) {
+ case READ_10:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10\n");
+ case READ_6:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_6\n");
+ break;
+ case WRITE_10:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10\n");
+ case WRITE_6:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_6\n");
+ break;
+ case INQUIRY:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n");
+ error = tw_scsiop_inquiry_complete(tw_dev, request_id);
+ break;
+ case READ_CAPACITY:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n");
+ error = tw_scsiop_read_capacity_complete(tw_dev, request_id);
+ break;
+ case TW_IOCTL:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TW_IOCTL\n");
+ error = tw_ioctl_complete(tw_dev, request_id);
+ break;
+ default:
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unknown scsi opcode: 0x%x.\n", tw_dev->srb[request_id]->cmnd[0]);
+ tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ }
+ if (error) {
+ /* Tell scsi layer there was an error */
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Scsi Error.\n");
+ tw_dev->srb[request_id]->result = (DID_ERROR << 16);
+ } else {
+ /* Tell scsi layer command was a success */
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ }
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->posted_request_count--;
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ status_reg_value = inl(status_reg_addr);
+ if (tw_check_bits(status_reg_value)) {
+ printk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
+ }
+ }
+ }
+ }
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags2);
+ }
+ spin_unlock_irqrestore(&io_request_lock, flags);
+} /* End tw_interrupt() */
+
+/* This function handles ioctls from userspace to the driver */
+int tw_ioctl(TW_Device_Extension *tw_dev, int request_id)
+{
+ unsigned char opcode;
+ int bufflen;
+ TW_Param *param;
+ TW_Command *command_packet;
+ u32 param_value;
+ TW_Ioctl *ioctl = NULL;
+ int tw_aen_code;
+
+ ioctl = (TW_Ioctl *)tw_dev->srb[request_id]->request_buffer;
+ if (ioctl == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_ioctl(): Request buffer NULL.\n");
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ return 0;
+ }
+ bufflen = tw_dev->srb[request_id]->request_bufflen;
+
+ /* Initialize command packet */
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ if (command_packet == NULL) {
+ printk(KERN_WARNING "3w-xxxx: twioctl(): Bad command packet virtual address.\n");
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ return 0;
+ }
+ memset(command_packet, 0, sizeof(TW_Sector));
+
+ /* Initialize param */
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_ioctl(): Bad alignment virtual address.\n");
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ return 0;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ memset(param, 0, sizeof(TW_Sector));
+
+ dprintk(KERN_NOTICE "opcode = %d table_id = %d parameter_id = %d parameter_size_bytes = %d\n", ioctl->opcode, ioctl->table_id, ioctl->parameter_id,, ioctl->parameter_size_bytes);
+ opcode = ioctl->opcode;
+
+ switch (opcode) {
+ case TW_OP_NOP:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl(): caught TW_OP_NOP.\n");
+ command_packet->byte0.opcode = TW_OP_NOP;
+ break;
+ case TW_OP_GET_PARAM:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl(): caught TW_OP_GET_PARAM.\n");
+ command_packet->byte0.opcode = TW_OP_GET_PARAM;
+ param->table_id = ioctl->table_id;
+ param->parameter_id = ioctl->parameter_id;
+ param->parameter_size_bytes = ioctl->parameter_size_bytes;
+ tw_dev->ioctl_size[request_id] = ioctl->parameter_size_bytes;
+ dprintk(KERN_NOTICE "table_id = %d parameter_id = %d parameter_size_bytes %d\n", param->table_id, param->parameter_id, param->parameter_size_bytes);
+ break;
+ case TW_OP_SET_PARAM:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl(): caught TW_OP_SET_PARAM: table_id = %d, parameter_id = %d, parameter_size_bytes = %d.\n",
+ ioctl->table_id, ioctl->parameter_id, ioctl->parameter_size_bytes);
+ command_packet->byte0.opcode = TW_OP_SET_PARAM;
+ param->table_id = ioctl->table_id;
+ param->parameter_id = ioctl->parameter_id;
+ param->parameter_size_bytes = ioctl->parameter_size_bytes;
+ memcpy(param->data, ioctl->data, ioctl->parameter_size_bytes);
+ break;
+ case TW_OP_AEN_LISTEN:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl(): caught TW_OP_AEN_LISTEN.\n");
+ if (tw_dev->aen_head == tw_dev->aen_tail) {
+ /* aen queue empty */
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl(): Aen queue empty.\n");
+ tw_aen_code = TW_AEN_QUEUE_EMPTY;
+ memcpy(tw_dev->srb[request_id]->request_buffer, &tw_aen_code, ioctl->parameter_size_bytes);
+ } else {
+ /* Copy aen queue entry to request buffer */
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl(): Returning aen 0x%x\n", tw_dev->aen_queue[tw_dev->aen_head]);
+ tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head];
+ memcpy(tw_dev->srb[request_id]->request_buffer, &tw_aen_code, ioctl->parameter_size_bytes);
+ if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
+ tw_dev->aen_head = TW_Q_START;
+ } else {
+ tw_dev->aen_head = tw_dev->aen_head + 1;
+ }
+ }
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ return 0;
+ default:
+ printk(KERN_WARNING "3w-xxxx: Unknown ioctl 0x%x.\n", opcode);
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ return 0;
+ }
+
+ param_value = tw_dev->alignment_physical_address[request_id];
+ if (param_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_ioctl(): Bad alignment physical address.\n");
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ }
+
+ command_packet->byte8.param.sgl[0].address = param_value;
+ command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
+
+ command_packet->byte0.sgl_offset = 2;
+ command_packet->size = 4;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = 0;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+ command_packet->byte6.parameter_count = 1;
+
+ /* Now try to post the command to the board */
+ tw_post_command_packet(tw_dev, request_id);
+
+ return 0;
+} /* End tw_ioctl() */
+
+/* This function is called by the isr to complete ioctl requests */
+int tw_ioctl_complete(TW_Device_Extension *tw_dev, int request_id)
+{
+ unsigned char *param_data;
+ unsigned char *buff;
+ TW_Param *param;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl_complete()\n");
+ buff = tw_dev->srb[request_id]->request_buffer;
+ if (buff == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_ioctl_complete(): Request buffer NULL.\n");
+ return 1;
+ }
+ dprintk(KERN_NOTICE "3w-xxxx: tw_ioctl_complete(): Request_bufflen = %d\n", tw_dev->srb[request_id]->request_bufflen);
+ memset(buff, 0, tw_dev->srb[request_id]->request_bufflen);
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ if (param == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param_data = &(param->data[0]);
+
+ memcpy(buff, param_data, tw_dev->ioctl_size[request_id]);
+
+ return 0;
+} /* End tw_ioctl_complete() */
+
+/* This function will mask the command interrupt */
+void tw_mask_command_interrupt(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_addr, control_reg_value;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = TW_CONTROL_MASK_COMMAND_INTERRUPT;
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_mask_command_interrupt() */
+
+/* This function will poll the status register for a flag */
+int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds)
+{
+ u32 status_reg_addr, status_reg_value;
+ struct timeval before, timeout;
+
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ do_gettimeofday(&before);
+ status_reg_value = inl(status_reg_addr);
+
+ while ((status_reg_value & flag) != flag) {
+ status_reg_value = inl(status_reg_addr);
+ do_gettimeofday(&timeout);
+ if (before.tv_sec + seconds < timeout.tv_sec) {
+ printk(KERN_WARNING "3w-xxxx: tw_poll_status(): Flag 0x%x not found.\n", flag);
+ return 1;
+ }
+ mdelay(1);
+ }
+ return 0;
+} /* End tw_poll_status() */
+
+/* This function will attempt to post a command packet to the board */
+int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
+{
+ u32 status_reg_addr, status_reg_value;
+ u32 command_que_addr, command_que_value;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n");
+ command_que_addr = tw_dev->registers.command_que_addr;
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ status_reg_addr = tw_dev->registers.status_reg_addr;
+ status_reg_value = inl(status_reg_addr);
+
+ if (tw_check_bits(status_reg_value))
+ printk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n");
+
+ if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
+ /* We successfully posted the command packet */
+ outl(command_que_value, command_que_addr);
+ tw_dev->state[request_id] = TW_S_POSTED;
+ tw_dev->posted_request_count++;
+ if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) {
+ tw_dev->max_posted_request_count = tw_dev->posted_request_count;
+ }
+ } else {
+ /* Couldn't post the command packet, so we do it in the isr */
+ if (tw_dev->state[request_id] != TW_S_PENDING) {
+ tw_dev->state[request_id] = TW_S_PENDING;
+ tw_dev->pending_request_count++;
+ if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) {
+ tw_dev->max_pending_request_count = tw_dev->pending_request_count;
+ }
+ tw_dev->pending_queue[tw_dev->pending_tail] = request_id;
+ if (tw_dev->pending_tail == TW_Q_LENGTH-1) {
+ tw_dev->pending_tail = TW_Q_START;
+ } else {
+ tw_dev->pending_tail = tw_dev->pending_tail + 1;
+ }
+ }
+ tw_unmask_command_interrupt(tw_dev);
+ return 1;
+ }
+ return 0;
+} /* End tw_post_command_packet() */
+
+/* This function will reset a device extension */
+int tw_reset_device_extension(TW_Device_Extension *tw_dev)
+{
+ int imax = 0;
+ int i = 0;
+ Scsi_Cmnd *srb;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n");
+ imax = TW_Q_LENGTH;
+
+ if (tw_reset_sequence(tw_dev)) {
+ printk(KERN_WARNING "3w-xxxx: tw_reset_device_extension(): Reset sequence failed for card %d.\n", tw_dev->host->host_no);
+ return 1;
+ }
+
+ /* Abort all requests that are in progress */
+ for (i=0;i<imax;i++) {
+ if ((tw_dev->state[i] != TW_S_FINISHED) &&
+ (tw_dev->state[i] != TW_S_INITIAL) &&
+ (tw_dev->state[i] != TW_S_COMPLETED)) {
+ srb = tw_dev->srb[i];
+ srb->result = (DID_RESET << 16);
+ tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
+ }
+ }
+
+ /* Reset queues and counts */
+ for (i=0;i<imax;i++) {
+ tw_dev->free_queue[i] = i;
+ tw_dev->state[i] = TW_S_INITIAL;
+ }
+ tw_dev->free_head = TW_Q_START;
+ tw_dev->free_tail = TW_Q_LENGTH - 1;
+ tw_dev->posted_request_count = 0;
+ tw_dev->pending_request_count = 0;
+ tw_dev->pending_head = TW_Q_START;
+ tw_dev->pending_tail = TW_Q_START;
+
+ return 0;
+} /* End tw_reset_device_extension() */
+
+/* This function will reset a controller */
+int tw_reset_sequence(TW_Device_Extension *tw_dev)
+{
+ int error = 0;
+ int tries = 0;
+
+ /* Disable interrupts */
+ tw_disable_interrupts(tw_dev);
+
+ /* Reset the board */
+ while (tries < TW_MAX_RESET_TRIES) {
+ tw_soft_reset(tw_dev);
+
+ error = tw_aen_drain_queue(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_reset_sequence(): No attention interrupt for card %d.\n", tw_dev->host->host_no);
+ tries++;
+ continue;
+ }
+
+ /* Check for controller errors */
+ if (tw_check_errors(tw_dev)) {
+ printk(KERN_WARNING "3w-xxxx: tw_reset_sequence(): Controller errors found, soft resetting card %d.\n", tw_dev->host->host_no);
+ tries++;
+ continue;
+ }
+
+ /* Empty the response queue again */
+ error = tw_empty_response_que(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_reset_sequence(): Couldn't empty response queue for card %d.\n", tw_dev->host->host_no);
+ tries++;
+ continue;
+ }
+
+ /* Now the controller is in a good state */
+ break;
+ }
+
+ if (tries >= TW_MAX_RESET_TRIES) {
+ printk(KERN_WARNING "3w-xxxx: tw_reset_sequence(): Controller error or no attention interrupt: giving up for card %d.\n", tw_dev->host->host_no);
+ return 1;
+ }
+
+ error = tw_initconnection(tw_dev);
+ if (error) {
+ printk(KERN_WARNING "3w-xxxx: tw_reset_sequence(): Couldn't initconnection for card %d.\n", tw_dev->host->host_no);
+ return 1;
+ }
+
+ /* Re-enable interrupts */
+ tw_enable_interrupts(tw_dev);
+
+ return 0;
+} /* End tw_reset_sequence() */
+
+/* This funciton returns unit geometry in cylinders/heads/sectors */
+int tw_scsi_biosparam(Disk *disk, kdev_t dev, int geom[])
+{
+ int heads, sectors, cylinders;
+ TW_Device_Extension *tw_dev;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n");
+ tw_dev = (TW_Device_Extension *)disk->device->host->hostdata;
+
+ heads = 64;
+ sectors = 32;
+ cylinders = disk->capacity / (heads * sectors);
+
+ if (disk->capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ cylinders = disk->capacity / (heads * sectors);
+ }
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders);
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ return 0;
+} /* End tw_scsi_biosparam() */
+
+/* This function will find and initialize any cards */
+int tw_scsi_detect(Scsi_Host_Template *tw_host)
+{
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_detect()\n");
+
+ /* Check if the kernel has PCI interface compiled in */
+ if (!pci_present()) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_detect(): No pci interface present.\n");
+ return 0;
+ }
+
+ return(tw_findcards(tw_host));
+} /* End tw_scsi_detect() */
+
+/* This is the new scsi eh abort function */
+int tw_scsi_eh_abort(Scsi_Cmnd *SCpnt)
+{
+ TW_Device_Extension *tw_dev=NULL;
+ int i = 0;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_eh_abort()\n");
+
+ if (!SCpnt) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_abort(): Invalid Scsi_Cmnd.\n");
+ return (FAILED);
+ }
+
+ tw_dev = (TW_Device_Extension *)SCpnt->host->hostdata;
+ if (tw_dev == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_abort(): Invalid device extension.\n");
+ return (FAILED);
+ }
+
+ spin_lock(&tw_dev->tw_lock);
+ tw_dev->num_aborts++;
+
+ /* If the command hasn't been posted yet, we can do the abort */
+ for (i=0;i<TW_Q_LENGTH;i++) {
+ if (tw_dev->srb[i] == SCpnt) {
+ if (tw_dev->state[i] == TW_S_STARTED) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_abort(): Abort succeeded for started Scsi_Cmnd 0x%x\n", (u32)tw_dev->srb[i]);
+ tw_dev->state[i] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, i);
+ spin_unlock(&tw_dev->tw_lock);
+ return (SUCCESS);
+ }
+ if (tw_dev->state[i] == TW_S_PENDING) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_abort(): Abort succeeded for pending Scsi_Cmnd 0x%x\n", (u32)tw_dev->srb[i]);
+ if (tw_dev->pending_head == TW_Q_LENGTH-1) {
+ tw_dev->pending_head = TW_Q_START;
+ } else {
+ tw_dev->pending_head = tw_dev->pending_head + 1;
+ }
+ tw_dev->pending_request_count--;
+ tw_dev->state[i] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, i);
+ spin_unlock(&tw_dev->tw_lock);
+ return (SUCCESS);
+ }
+ }
+ }
+
+ /* If the command has already been posted, we have to reset the card */
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_abort(): Abort failed for unknown Scsi_Cmnd 0x%x, resetting card %d.\n", (u32)SCpnt, tw_dev->host->host_no);
+
+ if (tw_reset_device_extension(tw_dev)) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_abort(): Reset failed for card %d.\n", tw_dev->host->host_no);
+ spin_unlock(&tw_dev->tw_lock);
+ return (FAILED);
+ }
+ spin_unlock(&tw_dev->tw_lock);
+
+ return (SUCCESS);
+} /* End tw_scsi_eh_abort() */
+
+/* This is the new scsi eh reset function */
+int tw_scsi_eh_reset(Scsi_Cmnd *SCpnt)
+{
+ TW_Device_Extension *tw_dev=NULL;
+ int flags = 0;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_eh_reset()\n");
+
+ if (!SCpnt) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_reset(): Invalid Scsi_Cmnd.\n");
+ return (FAILED);
+ }
+
+ tw_dev = (TW_Device_Extension *)SCpnt->host->hostdata;
+ if (tw_dev == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_reset(): Invalid device extension.\n");
+ return (FAILED);
+ }
+
+ spin_lock_irqsave(&tw_dev->tw_lock, flags);
+ tw_dev->num_resets++;
+
+ /* Now reset the card and some of the device extension data */
+ if (tw_reset_device_extension(tw_dev)) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_reset(): Reset failed for card %d.\n", tw_dev->host->host_no);
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
+ return (FAILED);
+ }
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_eh_reset(): Reset succeeded for card %d.\n", tw_dev->host->host_no);
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
+
+ return (SUCCESS);
+} /* End tw_scsi_eh_reset() */
+
+/* This function handles input and output from /proc/scsi/3w-xxxx/x */
+int tw_scsi_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout)
+{
+ TW_Device_Extension *tw_dev = NULL;
+ TW_Info info;
+ int i;
+ int j;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_proc_info()\n");
+
+ /* Find the correct device extension */
+ for (i=0;i<tw_device_extension_count;i++)
+ if (tw_device_extension_list[i]->host->host_no == hostno)
+ tw_dev = tw_device_extension_list[i];
+ if (tw_dev == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_proc_info(): Couldn't locate device extension.\n");
+ return (-EINVAL);
+ }
+
+ info.buffer = buffer;
+ info.length = length;
+ info.offset = offset;
+ info.position = 0;
+
+ if (inout) {
+ /* Write */
+ if (strncmp(buffer, "debug", 5) == 0) {
+ printk(KERN_INFO "3w-xxxx: Posted commands:\n");
+ for (j=0;j<TW_Q_LENGTH;j++) {
+ if (tw_dev->state[j] == TW_S_POSTED) {
+ TW_Command *command = (TW_Command *)tw_dev->command_packet_virtual_address[j];
+ printk(KERN_INFO "3w-xxxx: Request_id: %d\n", j);
+ printk(KERN_INFO "Opcode: 0x%x\n", command->byte0.opcode);
+ printk(KERN_INFO "Block_count: 0x%x\n", command->byte6.block_count);
+ printk(KERN_INFO "LBA: 0x%x\n", (u32)command->byte8.io.lba);
+ printk(KERN_INFO "Physical command packet addr: 0x%x\n", tw_dev->command_packet_physical_address[j]);
+ printk(KERN_INFO "Scsi_Cmnd: 0x%x\n", (u32)tw_dev->srb[j]);
+ }
+ }
+ printk(KERN_INFO "3w-xxxx: Free_head: %3d\n", tw_dev->free_head);
+ printk(KERN_INFO "3w-xxxx: Free_tail: %3d\n", tw_dev->free_tail);
+ }
+ return length;
+ } else {
+ /* Read */
+ if (start) {
+ *start = buffer;
+ }
+ tw_copy_info(&info, "scsi%d: 3ware Storage Controller\n", hostno);
+ tw_copy_info(&info, "Driver version: %s\n", tw_driver_version);
+ tw_copy_info(&info, "Current commands posted: %3d\n", tw_dev->posted_request_count);
+ tw_copy_info(&info, "Max commands posted: %3d\n", tw_dev->max_posted_request_count);
+ tw_copy_info(&info, "Current pending commands: %3d\n", tw_dev->pending_request_count);
+ tw_copy_info(&info, "Max pending commands: %3d\n", tw_dev->max_pending_request_count);
+ tw_copy_info(&info, "Last sgl length: %3d\n", tw_dev->sgl_entries);
+ tw_copy_info(&info, "Max sgl length: %3d\n", tw_dev->max_sgl_entries);
+ tw_copy_info(&info, "Last sector count: %3d\n", tw_dev->sector_count);
+ tw_copy_info(&info, "Max sector count: %3d\n", tw_dev->max_sector_count);
+ tw_copy_info(&info, "Resets: %3d\n", tw_dev->num_resets);
+ tw_copy_info(&info, "Aborts: %3d\n", tw_dev->num_aborts);
+ }
+ if (info.position > info.offset) {
+ return (info.position - info.offset);
+ } else {
+ return 0;
+ }
+} /* End tw_scsi_proc_info() */
+
+/* This is the main scsi queue function to handle scsi opcodes */
+int tw_scsi_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+{
+ unsigned char *command = SCpnt->cmnd;
+ int request_id = 0;
+ int error = 0;
+ int flags = 0;
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->host->hostdata;
+
+ spin_lock_irqsave(&tw_dev->tw_lock, flags);
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue()\n");
+
+ /* Skip scsi command if it isn't for us */
+ if ((tw_dev->is_unit_present[SCpnt->target] == FALSE) || (SCpnt->lun != 0)) {
+ SCpnt->result = (DID_BAD_TARGET << 16);
+ done(SCpnt);
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
+ return 0;
+ }
+ if (done == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_queue(): Invalid done function.\n");
+ SCpnt->result = (DID_ERROR << 16);
+ done(SCpnt);
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
+ return 0;
+ }
+ if (tw_dev == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsi_queue(): Invalid device extension.\n");
+ SCpnt->result = (DID_ERROR << 16);
+ done(SCpnt);
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
+ return 0;
+ }
+
+ /* Save done function into Scsi_Cmnd struct */
+ SCpnt->scsi_done = done;
+
+ /* Queue the command and get a request id */
+ tw_state_request_start(tw_dev, &request_id);
+
+ /* Save the scsi command for use by the ISR */
+ tw_dev->srb[request_id] = SCpnt;
+
+ switch (*command) {
+ case READ_10:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_10.\n");
+ case READ_6:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_6.\n");
+ case WRITE_10:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught WRITE_10.\n");
+ case WRITE_6:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught WRITE_6.\n");
+ error = tw_scsiop_read_write(tw_dev, request_id);
+ break;
+ case TEST_UNIT_READY:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n");
+ error = tw_scsiop_test_unit_ready(tw_dev, request_id);
+ break;
+ case INQUIRY:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n");
+ error = tw_scsiop_inquiry(tw_dev, request_id);
+ break;
+ case READ_CAPACITY:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n");
+ error = tw_scsiop_read_capacity(tw_dev, request_id);
+ break;
+ case TW_IOCTL:
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TW_SCSI_IOCTL.\n");
+ error = tw_ioctl(tw_dev, request_id);
+ break;
+ default:
+ printk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): Unknown scsi opcode: 0x%x\n", *command);
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ SCpnt->result = (DID_BAD_TARGET << 16);
+ done(SCpnt);
+ }
+ if (error) {
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ SCpnt->result = (DID_ERROR << 16);
+ done(SCpnt);
+ }
+ spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
+
+ return 0;
+} /* End tw_scsi_queue() */
+
+/* This function will release the resources on an rmmod call */
+int tw_scsi_release(struct Scsi_Host *tw_host)
+{
+ TW_Device_Extension *tw_dev;
+ tw_dev = (TW_Device_Extension *)tw_host->hostdata;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_release()\n");
+
+ /* Free up the IO region */
+ release_region((tw_dev->tw_pci_dev->base_address[0]), TW_IO_ADDRESS_RANGE);
+
+ /* Free up the IRQ */
+ free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
+ /* Free up device extension resources */
+ tw_free_device_extension(tw_dev);
+
+ /* Tell kernel scsi-layer we are gone */
+ scsi_unregister(tw_host);
+
+ return 0;
+} /* End tw_scsi_release() */
+
+/* This function handles scsi inquiry commands */
+int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id)
+{
+ TW_Param *param;
+ TW_Command *command_packet;
+ u32 command_que_value, command_que_addr;
+ u32 param_value;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n");
+
+ /* Initialize command packet */
+ command_que_addr = tw_dev->registers.command_que_addr;
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ if (command_packet == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n");
+ return 1;
+ }
+ memset(command_packet, 0, sizeof(TW_Sector));
+ command_packet->byte0.opcode = TW_OP_GET_PARAM;
+ command_packet->byte0.sgl_offset = 2;
+ command_packet->size = 4;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = 0;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+ command_packet->byte6.parameter_count = 1;
+
+ /* Now setup the param */
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ memset(param, 0, sizeof(TW_Sector));
+ param->table_id = 3; /* unit summary table */
+ param->parameter_id = 3; /* unitsstatus parameter */
+ param->parameter_size_bytes = TW_MAX_UNITS;
+ param_value = tw_dev->alignment_physical_address[request_id];
+ if (param_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n");
+ return 1;
+ }
+
+ command_packet->byte8.param.sgl[0].address = param_value;
+ command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ if (command_que_value == 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n");
+ return 1;
+ }
+
+ /* Now try to post the command packet */
+ tw_post_command_packet(tw_dev, request_id);
+
+ return 0;
+} /* End tw_scsiop_inquiry() */
+
+/* This function is called by the isr to complete an inquiry command */
+int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id)
+{
+ unsigned char *is_unit_present;
+ unsigned char *request_buffer;
+ int i;
+ TW_Param *param;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n");
+
+ /* Fill request buffer */
+ if (tw_dev->srb[request_id]->request_buffer == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Request buffer NULL.\n");
+ return 1;
+ }
+ request_buffer = tw_dev->srb[request_id]->request_buffer;
+ memset(request_buffer, 0, tw_dev->srb[request_id]->request_bufflen);
+ request_buffer[0] = TYPE_DISK; /* Peripheral device type */
+ request_buffer[1] = 0; /* Device type modifier */
+ request_buffer[2] = 0; /* No ansi/iso compliance */
+ request_buffer[4] = 31; /* Additional length */
+ memcpy(&request_buffer[8], "3ware ", 8); /* Vendor ID */
+ memcpy(&request_buffer[16], "3w-xxxx ", 16); /* Product ID */
+ memcpy(&request_buffer[32], tw_driver_version, 3);
+
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ if (param == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ is_unit_present = &(param->data[0]);
+
+ for (i=0 ; i<TW_MAX_UNITS; i++) {
+ if (is_unit_present[i] == 0) {
+ tw_dev->is_unit_present[i] = FALSE;
+ } else {
+ tw_dev->is_unit_present[i] = TRUE;
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete: Unit %d found.\n", i);
+ }
+ }
+
+ return 0;
+} /* End tw_scsiop_inquiry_complete() */
+
+/* This function handles scsi read_capacity commands */
+int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id)
+{
+ TW_Param *param;
+ TW_Command *command_packet;
+ u32 command_que_addr, command_que_value;
+ u32 param_value;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n");
+
+ /* Initialize command packet */
+ command_que_addr = tw_dev->registers.command_que_addr;
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+
+ if (command_packet == NULL) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n");
+ return 1;
+ }
+ memset(command_packet, 0, sizeof(TW_Sector));
+ command_packet->byte0.opcode = TW_OP_GET_PARAM;
+ command_packet->byte0.sgl_offset = 2;
+ command_packet->size = 4;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = tw_dev->srb[request_id]->target;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+ command_packet->byte6.block_count = 1;
+
+ /* Now setup the param */
+ if (tw_dev->alignment_virtual_address[request_id] == NULL) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ memset(param, 0, sizeof(TW_Sector));
+ param->table_id = TW_UNIT_INFORMATION_TABLE_BASE +
+ tw_dev->srb[request_id]->target;
+ param->parameter_id = 4; /* unitcapacity parameter */
+ param->parameter_size_bytes = 4;
+ param_value = tw_dev->alignment_physical_address[request_id];
+ if (param_value == 0) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n");
+ return 1;
+ }
+
+ command_packet->byte8.param.sgl[0].address = param_value;
+ command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ if (command_que_value == 0) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n");
+ return 1;
+ }
+
+ /* Now try to post the command to the board */
+ tw_post_command_packet(tw_dev, request_id);
+
+ return 0;
+} /* End tw_scsiop_read_capacity() */
+
+/* This function is called by the isr to complete a readcapacity command */
+int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id)
+{
+ unsigned char *param_data;
+ u32 capacity;
+ char *buff;
+ TW_Param *param;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n");
+
+ buff = tw_dev->srb[request_id]->request_buffer;
+ if (buff == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Request buffer NULL.\n");
+ return 1;
+ }
+ memset(buff, 0, tw_dev->srb[request_id]->request_bufflen);
+ param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
+ if (param == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
+ return 1;
+ }
+ param_data = &(param->data[0]);
+
+ capacity = (param_data[3] << 24) | (param_data[2] << 16) |
+ (param_data[1] << 8) | param_data[0];
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity);
+
+ /* Number of LBA's */
+ buff[0] = (capacity >> 24);
+ buff[1] = (capacity >> 16) & 0xff;
+ buff[2] = (capacity >> 8) & 0xff;
+ buff[3] = capacity & 0xff;
+
+ /* Block size in bytes (512) */
+ buff[4] = (TW_BLOCK_SIZE >> 24);
+ buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff;
+ buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff;
+ buff[7] = TW_BLOCK_SIZE & 0xff;
+
+ return 0;
+} /* End tw_scsiop_read_capacity_complete() */
+
+/* This function handles scsi read or write commands */
+int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id)
+{
+ TW_Command *command_packet;
+ u32 command_que_addr, command_que_value = 0;
+ u32 lba = 0x0, num_sectors = 0x0;
+ int i;
+ Scsi_Cmnd *srb;
+ struct scatterlist *sglist;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");
+
+ if (tw_dev->srb[request_id]->request_buffer == NULL) {
+ printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
+ return 1;
+ }
+ sglist = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
+ srb = tw_dev->srb[request_id];
+
+ /* Initialize command packet */
+ command_que_addr = tw_dev->registers.command_que_addr;
+ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
+ if (command_packet == NULL) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n");
+ return 1;
+ }
+
+ if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) {
+ command_packet->byte0.opcode = TW_OP_READ;
+ } else {
+ command_packet->byte0.opcode = TW_OP_WRITE;
+ }
+
+ command_packet->byte0.sgl_offset = 3;
+ command_packet->size = 5;
+ command_packet->request_id = request_id;
+ command_packet->byte3.unit = srb->target;
+ command_packet->byte3.host_id = 0;
+ command_packet->status = 0;
+ command_packet->flags = 0;
+
+ if (srb->cmnd[0] == WRITE_10) {
+ if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10))
+ command_packet->flags = 1;
+ }
+
+ if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) {
+ lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3];
+ num_sectors = (u32)srb->cmnd[4];
+ } else {
+ lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) |
+ ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5];
+ num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8);
+ }
+
+ /* Update sector statistic */
+ tw_dev->sector_count = num_sectors;
+ if (tw_dev->sector_count > tw_dev->max_sector_count)
+ tw_dev->max_sector_count = tw_dev->sector_count;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors);
+ command_packet->byte8.io.lba = lba;
+ command_packet->byte6.block_count = num_sectors;
+
+ /* Do this if there are no sg list entries */
+ if (tw_dev->srb[request_id]->use_sg == 0) {
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): SG = 0\n");
+ command_packet->byte8.io.sgl[0].address = virt_to_bus(tw_dev->srb[request_id]->request_buffer);
+ command_packet->byte8.io.sgl[0].length = tw_dev->srb[request_id]->request_bufflen;
+ }
+
+ /* Do this if we have multiple sg list entries */
+ if (tw_dev->srb[request_id]->use_sg > 0) {
+ for (i=0;i<tw_dev->srb[request_id]->use_sg; i++) {
+ command_packet->byte8.io.sgl[i].address = virt_to_bus(sglist[i].address);
+ command_packet->byte8.io.sgl[i].length = sglist[i].length;
+ command_packet->size+=2;
+ }
+ if (tw_dev->srb[request_id]->use_sg > 1)
+ command_packet->size-=2;
+ }
+
+ /* Update SG statistics */
+ tw_dev->sgl_entries = tw_dev->srb[request_id]->use_sg;
+ if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
+ tw_dev->max_sgl_entries = tw_dev->sgl_entries;
+
+ command_que_value = tw_dev->command_packet_physical_address[request_id];
+ if (command_que_value == 0) {
+ dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n");
+ return 1;
+ }
+
+ /* Now try to post the command to the board */
+ tw_post_command_packet(tw_dev, request_id);
+
+ return 0;
+} /* End tw_scsiop_read_write() */
+
+/* This function will handle test unit ready scsi command */
+int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id)
+{
+ dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n");
+
+ /* Tell the scsi layer were done */
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ tw_state_request_finish(tw_dev, request_id);
+ tw_dev->srb[request_id]->result = (DID_OK << 16);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+
+ return 0;
+} /* End tw_scsiop_test_unit_ready() */
+
+/* This function will setup the interrupt handler */
+int tw_setup_irq(TW_Device_Extension *tw_dev)
+{
+ char *device = TW_DEVICE_NAME;
+ int error;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_setup_irq()\n");
+ error = request_irq(tw_dev->tw_pci_dev->irq, tw_interrupt, SA_SHIRQ, device, tw_dev);
+
+ if (error < 0) {
+ printk(KERN_WARNING "3w-xxxx: tw_setup_irq(): Error requesting IRQ: %d for card %d.\n", tw_dev->tw_pci_dev->irq, tw_dev->host->host_no);
+ return 1;
+ }
+ return 0;
+} /* End tw_setup_irq() */
+
+/* This function will soft reset the controller */
+void tw_soft_reset(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_addr, control_reg_value;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = ( TW_CONTROL_ISSUE_SOFT_RESET |
+ TW_CONTROL_CLEAR_HOST_INTERRUPT |
+ TW_CONTROL_CLEAR_ATTENTION_INTERRUPT |
+ TW_CONTROL_MASK_COMMAND_INTERRUPT |
+ TW_CONTROL_MASK_RESPONSE_INTERRUPT |
+ TW_CONTROL_CLEAR_ERROR_STATUS |
+ TW_CONTROL_DISABLE_INTERRUPTS);
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_soft_reset() */
+
+/* This function will free a request_id */
+int tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id)
+{
+ dprintk(KERN_NOTICE "3w-xxxx: tw_state_request_finish()\n");
+
+ do {
+ if (tw_dev->free_tail == TW_Q_LENGTH-1) {
+ tw_dev->free_tail = TW_Q_START;
+ } else {
+ tw_dev->free_tail = tw_dev->free_tail + 1;
+ }
+ } while ((tw_dev->state[tw_dev->free_queue[tw_dev->free_tail]] != TW_S_COMPLETED));
+
+ tw_dev->free_queue[tw_dev->free_tail] = request_id;
+
+ tw_dev->state[request_id] = TW_S_FINISHED;
+ dprintk(KERN_NOTICE "3w-xxxx: tw_state_request_finish(): Freeing request_id %d\n", request_id);
+
+ return 0;
+} /* End tw_state_request_finish() */
+
+/* This function will assign an available request_id */
+int tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id)
+{
+ int id = 0;
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_state_request_start()\n");
+
+ /* Obtain next free request_id */
+ do {
+ if (tw_dev->free_head == TW_Q_LENGTH - 1) {
+ tw_dev->free_head = TW_Q_START;
+ } else {
+ tw_dev->free_head = tw_dev->free_head + 1;
+ }
+ } while ((tw_dev->state[tw_dev->free_queue[tw_dev->free_head]] == TW_S_STARTED) ||
+ (tw_dev->state[tw_dev->free_queue[tw_dev->free_head]] == TW_S_POSTED) ||
+ (tw_dev->state[tw_dev->free_queue[tw_dev->free_head]] == TW_S_PENDING) ||
+ (tw_dev->state[tw_dev->free_queue[tw_dev->free_head]] == TW_S_COMPLETED));
+
+ id = tw_dev->free_queue[tw_dev->free_head];
+
+ if (tw_dev->free_head == TW_Q_LENGTH - 1) {
+ tw_dev->free_head = TW_Q_START;
+ } else {
+ tw_dev->free_head = tw_dev->free_head + 1;
+ }
+
+ dprintk(KERN_NOTICE "3w-xxxx: tw_state_request_start(): id = %d.\n", id);
+ *request_id = id;
+ tw_dev->state[id] = TW_S_STARTED;
+
+ return 0;
+} /* End tw_state_request_start() */
+
+/* This function will unmask the command interrupt on the controller */
+void tw_unmask_command_interrupt(TW_Device_Extension *tw_dev)
+{
+ u32 control_reg_addr, control_reg_value;
+
+ control_reg_addr = tw_dev->registers.control_reg_addr;
+ control_reg_value = TW_CONTROL_UNMASK_COMMAND_INTERRUPT;
+ outl(control_reg_value, control_reg_addr);
+} /* End tw_unmask_command_interrupt() */
+
+/* Now get things going */
+
+#ifdef MODULE
+Scsi_Host_Template driver_template = TWXXXX;
+#include "scsi_module.c"
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)