patch-2.1.33 linux/drivers/scsi/ChangeLog.ncr53c8xx
Next file: linux/drivers/scsi/Config.in
Previous file: linux/drivers/pnp/parport_share.c
Back to the patch index
Back to the overall index
- Lines: 38
- Date:
Tue Apr 8 13:12:55 1997
- Orig file:
v2.1.32/linux/drivers/scsi/ChangeLog.ncr53c8xx
- Orig date:
Mon Mar 17 14:54:29 1997
diff -u --recursive --new-file v2.1.32/linux/drivers/scsi/ChangeLog.ncr53c8xx linux/drivers/scsi/ChangeLog.ncr53c8xx
@@ -1,3 +1,37 @@
+Sat Apr 5 13:00 1997 Gerard Roudier (groudier@club-internet.fr)
+ * revision 1.18d
+ - Probe NCR pci device ids in reverse order if asked by user from
+ the boot command line. Suggested by Richard Waltham.
+ - Make a separate function that prints out verbose information on
+ severe error (assumed from hardware).
+ - Add the transfer period factor and the max commands per lun value
+ to the proc info data. If debug flags are set or verbosity is
+ greater than 1, debug flags and verbosity are returned in proc
+ info data.
+ - Update the documentation.
+
+Thu Mar 20 23:00 1997 Gerard Roudier (groudier@club-internet.fr)
+ * revision 1.18c
+ - Add special features support for NCR53C885 and NCR53C896 chip.
+ Quite obvious, but untested, and based on the fact that:
+ The 885 supports same features as the 875.
+ The 896 is a 64 bits PCI version of the 895.
+ - Improve recovery from SCSI GROSS ERRORS.
+ I can get such errors by making the driver negotiate offset 8 with
+ a disk and setting the ncr chip to a lower offset value.
+ I got bunches of errors that have been gracefully recovered by
+ the driver.
+ The driver now uses its timer handler in order to wait 2 sec. for
+ devices to settle after SCSI reset and so does not uselessly freeze
+ the system with interrupt masked for seconds.
+ - Enable 'burst op code fetch' and 'read line' for 815 chips.
+ - Use a 2 commands queue depth instead of 1 for devices that does
+ not support tagged command queuing.
+ - The ULTRA timing flag setting was based on the output resulting
+ period factor of the ncr and not on the negotiated one.
+ This flag setting was wrong only for 24 ns negotiated period factor.
+ - Some other minor changes and cleanups.
+
Thu Feb 27 23:00 1997 Gerard Roudier (groudier@club-internet.fr)
* ncr53c8xx.c ncr53c8xx.h revision 1.18b
- 'On paper' support of the NCR53C895 Ultra-2 chip.
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov