patch-2.1.113 linux/include/linux/amifdreg.h

Next file: linux/include/linux/atari_rootsec.h
Previous file: linux/include/linux/amifd.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.112/linux/include/linux/amifdreg.h linux/include/linux/amifdreg.h
@@ -0,0 +1,81 @@
+#ifndef _LINUX_AMIFDREG_H
+#define _LINUX_AMIFDREG_H
+
+/*
+** CIAAPRA bits (read only)
+*/
+
+#define DSKRDY      (0x1<<5)        /* disk ready when low */
+#define DSKTRACK0   (0x1<<4)        /* head at track zero when low */
+#define DSKPROT     (0x1<<3)        /* disk protected when low */
+#define DSKCHANGE   (0x1<<2)        /* low when disk removed */
+
+/*
+** CIAAPRB bits (read/write)
+*/
+
+#define DSKMOTOR    (0x1<<7)        /* motor on when low */
+#define DSKSEL3     (0x1<<6)        /* select drive 3 when low */
+#define DSKSEL2     (0x1<<5)        /* select drive 2 when low */
+#define DSKSEL1     (0x1<<4)        /* select drive 1 when low */
+#define DSKSEL0     (0x1<<3)        /* select drive 0 when low */
+#define DSKSIDE     (0x1<<2)        /* side selection: 0 = upper, 1 = lower */
+#define DSKDIREC    (0x1<<1)        /* step direction: 0=in, 1=out (to trk 0) */
+#define DSKSTEP     (0x1)           /* pulse low to step head 1 track */
+
+/*
+** DSKBYTR bits (read only)
+*/
+
+#define DSKBYT      (1<<15)         /* register contains valid byte when set */
+#define DMAON       (1<<14)         /* disk DMA enabled */
+#define DISKWRITE   (1<<13)         /* disk write bit in DSKLEN enabled */
+#define WORDEQUAL   (1<<12)         /* DSKSYNC register match when true */
+/* bits 7-0 are data */
+
+/*
+** ADKCON/ADKCONR bits
+*/
+
+#ifndef SETCLR
+#define ADK_SETCLR      (1<<15)     /* control bit */
+#endif
+#define ADK_PRECOMP1    (1<<14)     /* precompensation selection */
+#define ADK_PRECOMP0    (1<<13)     /* 00=none, 01=140ns, 10=280ns, 11=500ns */
+#define ADK_MFMPREC     (1<<12)     /* 0=GCR precomp., 1=MFM precomp. */
+#define ADK_WORDSYNC    (1<<10)     /* enable DSKSYNC auto DMA */
+#define ADK_MSBSYNC     (1<<9)      /* when 1, enable sync on MSbit (for GCR) */
+#define ADK_FAST        (1<<8)      /* bit cell: 0=2us (GCR), 1=1us (MFM) */
+ 
+/*
+** DSKLEN bits
+*/
+
+#define DSKLEN_DMAEN    (1<<15)
+#define DSKLEN_WRITE    (1<<14)
+
+/*
+** INTENA/INTREQ bits
+*/
+
+#define DSKINDEX    (0x1<<4)        /* DSKINDEX bit */
+
+/*
+** Misc
+*/
+ 
+#define MFM_SYNC    0x4489          /* standard MFM sync value */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+
+#endif /* _LINUX_AMIFDREG_H */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov